Loading
Loading…
Loading…
Tender Value
₹63.1 L
EMD Value
₹1.3 L
Closing Date
27 Jan 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SUR DIV
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less, where V= Advertised value of the tender in crores of Rupees & N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any signalling or Telecom work or Combined Signalling & Telecom work involving cable laying . OR Any signalling or Telecom work of Utility Shifting/ Infringement Removal of S&T gears and other related miscellaneous works.
6 conditions · 1 needing a document upload
Please refer to page 5 of 'Instruction to Tenderer' enclosed in Documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Protection of S&T cables and gears in connection with engineering works related to bridges and tunnels in Kurduwadi - Latur section of Solapur division on Central Railway
SUR-N-T-2025-26-34~CR
SUR-N-T-2025-26-34
Open
Works - General
8 Months
Solapur, Maharashtra
₹0
₹1.3 L
27 Jan 2026
1 Jan 2026
13 Jan 2026
25 items across 1 schedule · ₹63,07,875.65 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply and installation of MOTOTRBO SLR 1000 REPEATER. Single frequency Digital Range Extender of make Motorola model SLR 1000 in Simplex mode in order to get improved enhanced Walkie talkie communication, in the challenging locations like curved platforms with shelter obstructions, High gradient terrains, hilly areas, forest areas, Train yards etc. Data sheet enclosed for detailed specification. (Inspection by RITES) | Set 4.00 | 474360.00 | — | 18,97,440 |
| 2 | Supply of Thermo shrink joint kit suitable for 6 quad cable for straight through/derivation transformer as per RDSO specification No.IRS- TC-77/2012 (Rev.3.0) Amdt.3 or latest. from RDSO approved firms. (Inspection by RDSO) | Numbers 33.00 | 1985.51 | — | 65,521.83 |
| 3 | Making of Thermo shrink straight through/derivation/transformer /PIJF cable joint for underground jelly filled cable 6 quad/4quad/20 pair 10 pair etc. PIJF cable as per the instruction of Rly engineer at site. | Numbers 21.00 | 1516.76 | — | 31,851.96 |
| 4 | Supply of Apparatus Case with Godown locks with detachable handle on both the doors. Half Case as per Drg No SK 783-1/2. with latest alteration. (Inspection by RITES) | Numbers 10.00 | 11950.31 | — | 1,19,503.1 |
| 5 | Excavation and Casting of Apparatus Case foundation with contractors Anchor bolts, cement, ballast and other materials. Half Case as per Drg No SK 804 | Numbers 10.00 | 9012.45 | — | 90,124.5 |
| 6 | Erection of Apparatus Cases. This includes filling of location foundations with river bed sand and plastering on top of the sand. Half Case | Numbers 10.00 | 783.18 | — | 7,831.8 |
| 7 | Painting of two coats of synthetic enamel paint over one coat of primer on the following after scraping & cleaning surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge. Epoxy paint will be supplied by Railways. Note: The paint and primer should be from M/s Asian paints Co. Ltd., The paints will be primer (IS 5660 of 1970) the aluminium synthetic will be primer (IS 2932 of 1974) brilliant white and yellow painting two coats of enamel paint over one coat of primer. Apparatus case Half size | Numbers 10.00 | 304.00 | — | 3,040 |
| 8 | Supply of Paint and painting of Emergency Socket/ Equipment's by applying one coat RED Oxide as base colour and then painting the assembly/ equipment as per standard practice on Central Railway. The paint shall be either from ASIAN/ SHALIMAR/ APCOLITE having ISI mark. (Inspection by Consignee) | Numbers 5.00 | 605.31 | — | 3,026.55 |
| 9 | Supply of 6 pin Emergency Socket Box made of FRP material as per RDSO Specification No. RDSO/SPN/TC/44/2002 ver.2 amendment-III or latest. (Inspection by Consignee). | Numbers 4.00 | 4976.79 | — | 19,907.16 |
| 10 | Supply of 6 pin emergency socket flat type to suit light weight 2W/4W portable control telephone as per RDSO specification No. IRS/TC/42/87 with latest amendment. (Inspection by Consignee) | Numbers 4.00 | 424.48 | — | 1,697.92 |
| 11 | Fabrication and supply of EC assembly complete with erection of fabricated assembly at location as per Telecom/RE manual, as indicated in the route chart & as directed by Engineer in charge this includes welding of GI pipe for fixing of EC box. | Numbers 4.00 | 5875.08 | — | 23,500.32 |
| 12 | Fixing of EC socket complete with termination of derivation cable on strip inside the EC box duly mounted on good quality wooden box at SM building/cabin/gate lodge and wherever necessary as per instructions of site incharge of the work. | Numbers 4.00 | 882.06 | — | 3,528.24 |
| 13 | Supply of RCC pipes half round of size 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No. 458/2003 amendment-1 with Rev.4. (Inspection by RITES) | Numbers 800.00 | 206.14 | — | 1,64,912 |
| 14 | Laying of RCC half round cement pipe of appprox. Size (150/300mm dia X 2 mtr. length) inside the trench after laying of cable. Pipes shall be placed as per directives of site engineer. | Numbers 400.00 | 36.45 | — | 14,580 |
| 15 | Supply of GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA, JINDAL/ ZENITH BIRLA make. (Inspection by RITES) | Metre 1464.00 | 1029.32 | — | 15,06,924.48 |
| 16 | Laying of GI pipes in on bridges/culverts/concrete drawin/mountain ridges etc. with suitable GI bend shall be provided where there is turning of pipe as per the instruction of Site engineer. GI clamps at every 2m as shown in the drawing to be fixed. Suitable holes to be made in the pipe before laying as per the instruction of the site engineer 10mm dia Drg. No. SK 808. | Metre 1440.00 | 143.54 | — | 2,06,697.6 |
| 17 | SUPPLY OF "C" CHANNEL CLAMPS with nut bolts, washers and all type fixtures for 6 inch dia pipe toe fixed o GIRDERS, on rock cuttings etc., as per DRG No.SK-900.(Inspection by RITES) | Numbers 720.00 | 2258.71 | — | 16,26,271.2 |
| 18 | Deployment of manpower like unskilled labour to work in emergencies or as required during cable shifting, finding the existing cable route, shifting & placing of material in depots etc. | Man- 160.00 Days | 650.15 | — | 1,04,024 |
| 19 | Excavation of cable trench as per cable route plan,1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by stones/bricks, clearing of route, bushes etc. The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. In case depth of trench is not achievable due to site conditions proportionate payment will be made. | cum 270.00 | 350.00 | — | 94,500 |
| 20 | Excavation of cable trench as per cable route plan,1 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling. This work includes covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by stones/bricks,clearing of route,bushes etc.The work shall be done as per the extant practice on Central Railway and instructions of Railway Engineer at site. In case depth of trench is not achievable due to site conditions proportionate payment will be made. | cum 180.00 | 583.33 | — | 1,04,999.4 |
| 21 | Wherever depth of 0.5 m cable trench is not feasible cable shall be protected as under:- Preparation of cement mixture 1:3:6 with contractor's own materials and spreading cement concrete mixture layer of 100 mm thick over the already laid cables in the excavated trench. | cum 30.00 | 5329.55 | — | 1,59,886.5 |
| 22 | Jointing of 4 / 6 quad cable with Heat Shrinkable straight through Jointing Kit for 4 / 6 quad cable. (This includes supply of Quad cable joint kit from RDSO approved source) | Numbers 4.00 | 3562.19 | — | 14,248.76 |
| 23 | Laying of signalling/Power/Telecom cable of various cores/sizes in trenches. | Kilometre 1.50 | 5197.42 | — | 7,796.13 |
| 24 | Supply of earth electrode assembly as per Drg.No. CR/S&T/SK-815. (Inspection by Consignee) | Numbers 10.00 | 1078.08 | — | 10,780.8 |
| 25 | Installation of earth electrode assenbly as per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No. CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks,block insruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor. | Numbers 10.00 | 2528.14 | — | 25,281.4 |
| Schedule total | ₹63,07,875.65 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .