REPAIR, MAINTENANCE OF CEILING FAN, EXHAUST FAN, WALL MOUNTED FAN, PEDESTAL FAN, METER, INTERNAL WIRING, FITTING AND FIXTURE SERVICE CONNECTION, DISTRIBUTION BOARD, AND ALLIED WORKS AT SITE R AF STATION THANE

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, light fittings, MCB DBs,out let boxes etc.removing material for taking credit and making good disturbed surfaces of walls, floors, ceilings etc,complete all as specified and as directed by Engr-in-charge.

M&L for consealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 V grade confirming to IS 694 drawn through PVC conduit of suitable size heavy grade ISI marked including necessary conduit accessories, sunken type pressed steel terminal boxes with plastic laminated sheet of approved shade 3mm thick including 1.5 mm PVC insulated flame retardant copper conductor as in continious earth wire ,complete all as specified and as directed by Engr-in-charge. for the following as given below:-

One Light/Bell point controlled by one switch .

One ceiling / Exhaust fan point controlled by one switch

One 3 pin 5 Amps socket out let on independent board

One 3 pin 5 Amps socket out let on same board

Ditto-All as per item No-2 above but with 2.5 Sqmm wire for 15 Amp socket outlet on independent board

M&L for point wiring with 1.5 Sqmm (nominal area) FR insulated multi-stranded copper conductor confirming to IS 694 in and including Medium duty PVC casing capping (ISI marked) including fitting & accessories, with MS concealed terminal boxes with 3mm thick laminated BakeliteHylum sheet top cover for mounting switch, socket etc including 1.5 Sqmm stranded copper conductor with green PVC insulation earth continuity conductor 1.5 Sqmm connected to the common earth dolly and controlled by one switch ,complete all as specified and as directed by Engr-in-charge. Make of Cable – HPL/Havells/ Polycab/Anchor/Finolex. for the following as given below:-

One Light/Bell point controlled by one switch .

One ceiling / Exhaust fan point controlled by one switch

One 3 pin 5 Amps socket out let on independent board

One 3 pin 5 Amps socket out let on same board

Ditto-All as per item No-4 above but with 2.5 Sqmm wire for 15 Amp socket outlet on independent board

Supply & Fix switch piano flush button single pole one way 5 Amps, 250 V ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix Bell push button flush type 5 Amps ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix switch piano flush button single pole one way 15 Amps, 250 V ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix socket outlet 2 in 1,3 pin, 5A flush type 220 V ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix switch socket combination 2 in 1,3 pin, 5 Amps flush type 220 V ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix socket outlet 2 in 1,6 pin, 5/15Amps flush type 220 V ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix switch socket combination 2 in 1,6 pin, 5/15Amps flush type 220 V ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix and fix bell buzzer AC 230 volt single pole ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix fix bell multi music AC 230 volt single pole ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix fan regulator Electronic type step type for 400 watts ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix Modular switch 1 way 6A,1 modul, 220 V ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair, Modular switch 1 way 16A,1 modul, 220 V ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair, Modular socket 6A-2/3 pin combined 2 module flush type 220 V ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair, Modular socket 6A/16A-2/3 pin combined 2 module flush type 220 V ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair, Modular switch socket combination 16A,6 pin.3 module flush type 220 V ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair, Modular Bell push button flush type 5 Amps ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair,Modular fan regulator Electronics step type 120 watts 2 module and connecting ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair,Modular white cover plate with frame suitable for 1 module ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair ,Modular white cover plate with frame suitable for 3 module ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair , Modular Metal flush box suitable for 1/2 modul. ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair ,Modular Metal flush box suitable for 3 module. ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair ,Ceiling rose, surface bakelite, 65mm x 50mm two to three terminals. ,complete all as specified and as directed by Engr-in-charge.

S&F, in repair , capping casing 20mm width,complete all as specified and as directed by Engr-in-charge.

S&F, in repair , lamp holder,PVC/Polycarbonate type with back plate suitable for batten fitting ,complete all as specified and as directed by Engr-in-charge.

S&F Batten type LED light fitting 1x18/20watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin. ,complete all as specified and as directed by Engr-in-charge. Make: Havells/Wipro/Bajaj/C&S/Philips

S&F Batten type LED light fitting 1x9/10 watt 2 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin. ,complete all as specified and as directed by Engr-in-charge. Make: Havells/Wipro/Bajaj/C&S/Philips

S&F Batten type LED decorative up to light fitting 15 watt round including LED bulb complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes complete all as specified and as directed by Engr-in charge. ,complete all as specified and as directed by Engr-in-charge.

Supply & fixing energy efficient square surface/ceiling mounted LED down 2x2 luminaire 34/36 watt white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover complete all as specified and as directed by the Engr- in- Charge. ,complete all as specified and as directed by Engr-in-charge.

Supply & fixing energy efficient LED mounted panel 12 watt white powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover complete all as specified and as directed by the Engr- in- Charge. ,complete all as specified and as directed by Engr-in-charge.

Supply, fixing and testing LED bulding security light fitting of 25/30 Watt including LED lamps complete with body robust,corrosion resistant,superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD (I) less than 10%, cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection. LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 66 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report. ,complete all as specified and as directed by Engr-in-charge.

Supply, fixing and testing Bolard light of 8 Watt in repair/replacement of existing lights including LED lamps totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD(I) less than 10% ,cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection.Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection,no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection.Cover should not degrade due to heating and ageing.The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing LED bulb 5/7/9 watt, 230 Volt, 50 Hz, complete all as specified and as directed by the Engr- in- Charge. complete all as specified and as directed by the Engr- in- Charge.

Taking down the ceilling fan/wall mounted fan,Exhust fan from ceilling,wall,cleaning the dust,drit ,greashing,servicing ,repairing and refixing the original position ,complete all as specified and as directed by Engr-in-charge. Note:- Necessary spare for repairing will be measured and paid in respective items.

Taking down unserviceable/Serviceable ceilling fan/wall mounted fan,exhust fan of any capacity or size,rewinding,refixing the same location, and unserviceable fan deposited to mes store yard ,complete all as specified and as directed by Engr-in-charge.

Re winding ceilling fan with super enameled copper wire suitable gauge to get designed condition of speed for the particular make of fan including insulating, varnishing, providing sleeves to copper wire and testing for good running condition of sweep1200 mm ,220 volt ,50 HZ,single phase ,complete all as specified and as directed by Engr-in-charge.

Re winding Exhust fan with super enameled copper wire suitable gauge to get designed condition of speed for the particular make of fan including insulating, varnishing, providing sleeves to copper wire and testing for good running condition of sweep300 mm ,220 volt ,50 HZ,single phase

Re winding wall mounted fan with super enameled copper wire suitable gauge to get designed condition of speed for the particular make of fan including insulating, varnishing, providing sleeves to copper wire and testing for good running condition of sweep400 mm ,220 volt ,50 HZ,single phase ,complete all as specified and as directed by Engr-in-charge.

Supply only Gun metal bush suitable for particular make of fan of 1200mm sweep ,complete all as specified and as directed by Engr-in-charge.

Supply only metal bush suitable for particular make of exhaust fan of 400 mm sweep ,complete all as specified and as directed by Engr-in-charge.

Supply only ball bearing suitable for particular make of fan of 1200 mm sweep ,complete all as specified and as directed by Engr-in-charge.Make for Bearing - NBC/Tata/SKF

Supply only ball bearing suitable for particular make of exhaust fan of sweep 300mm/450 mm complete all as directed Make -SKF/NBC/SKF

Supply only 2.5 Mfd/3.5 Mfd capacity Make ,complete all as specified and as directed by Engr-in-charge. Make : Havells,HPL, Asian.

Supply only Capacitor 4Mfd suitable for exhaust fan of sweep 300mm/450mm complete all as directed. Make :Havells,HPL, Asian.

Supply and fixing ceilling fan 5 star rated, 1200 mm sweep ,220 volt ,50 HZ,single phase, all as directed. ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing wall mounted fan 5 star rated., 400 mm sweep ,220 volt ,50 HZ,single phase, ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing exhaust fan 5 star rated. 230 mm sweep, 220 volt ,50 HZ,single phase, 5 star rated. ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing exhaust fan 5 star rated. 450 mm sweep, 18" 220 volt ,50 HZ, single phase, hevy duty ,complete all as specified and as directed by Engr-in-charge.

M&L for repairs to existing earth pit by the Excavating upto 2.25 mtr and getting out in soft/loose soil and repair the strip and rejoint with plate ,replace the charcoal & common salt,back field compound,trreck, Refilling the external earth upto ground level and poring of water,ramming the earth surface ,removing surplus surface,complete all as specified and as directed by Engr-in-charge.Note: (i) Excavation,returning filling and Replacement of , Charcoal, common salt , back filled compound, tarreck,PCC chamber & HDPE cover wil be measured and paid separately under relevant item of Sch 'A'.

All as per item No 53 above but for Chemical earthing exceeding upto 4.5 mtr depth

Supply only Funnel with wire mesh of size suitable for 20 mm dia watering pipe

Supply only Common Salt commercial type

Supply only Charcoal

Supply only Magnesium Sulphate (MgSO4) all as directed

Supply only back filled compound all as directed

Supply only tarreck all as directed

Material and labour for earth pit chember of size 0.6mx0.6mx0.6m made with PCC 1:2:4 type B-2 including HDPE earthing pit cover inspection chember of size 200 mm depth, 300mm length and300mm width ,complete all as specified and as directed by Engr-in-charge.

Material and labour for Brazzing of copper earth strip 20/25/32 mm with available at site and reconnected properly ,complete all as specified and as directed by Engr-in-charge.

Taking down unserviceable and dislocated Copper/aluminium strip of any size from floor of any size height ,complete all as specified and as directed by Engr-in-charge.

S&F,in repair, copper strip of 20x3.00 mm as roof conductor and down conductor till test point all as directed Note-Copper strip to be jointed through brazing only ,complete all as specified and as directed by Engr-in-charge.

S&F,in repair, Galvanised strip of 20x3.00 mm as roof conductor and down conductor till test point all as directed. Note-Galvanised strip to be jointed through brazing only

S&F,in repair, copper strip of 32x6.00 mm as roof conductor and down conductor till test point all as directed . Note-Copper strip to be jointed through brazzing ,complete all as specified and as directed by Engr-in-charge.

Refixing the serviceable copper/aluminium strip any size on the existing location after necessary repair all as directed.Note-copper strip to be jointed through brazzing only ,complete all as specified and as directed by Engr-in-charge.

Taking down unserviceable and dislocated air termination rod of any type from floor of any size ,complete all as specified and as directed by Engr-in-charge.

Refixing the serviceable copper air termination rod on the existing location after necessary repair all as directed.Note- strip to be jointed on air termination rod through brazing only ,complete all as specified and as directed by Engr-in-charge.

Refixing the serviceable Aluminium air termination rod on the existing location after necessary repair all as directed.Note- strip to be jointed on air termination rod through brazing only ,complete all as specified and as directed by Engr-in-charge.

S&F,in repair, single pointed soild copper rod 300mm long and 12mm dia fixed on suitable flat mounted plate and connected with roof/down conductor ,complete all as specified and as directed by Engr-in-charge.

S&F,in repair, single pointed soild Aluminium rod 300mm long and 12mm dia fixed on suitable flat mounted plate and connected with roof/dowen conductor ,complete all as specified and as directed by Engr-in-charge.

S&F Porcealing insulators in replacement for fixing Copper strip on wall / Roof bldg with necessary screws washers and nut bolts etc all Specified . Note - Rates are inclusive of copper screws with washers for fixing copper strip on porciline insulator with minimum size 1 inch and maximum size 1.5 inch with max external dia of screw is 8mm and 2 nos of GI nut for fixing insulator on wall all as per site requirement ,complete all as specified and as directed by Engr-in-charge.

S&F,in repair,Medium grade GI pipe of 20 mm dia for fixing air termination rod, the pipe shall be suitably tapered for fixing the saddle insulator at an interval not exceeding 0.5 meter, the pipe should be laid vertically and should be properly supported, length of each vertically pipe should not exceed 3 RM, the air termination rod, down conductors should be insulated from the pipe all as directed

Taking down unserviceable test point terminals block and supply and fixing the same. The terminal block made with gun metal size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex head of gun metal screw ,complete all as specified and as directed by Engr-in-charge.

S&F,in repair,PVC cable with copper in conduit condcutor 3x1.5 sqmm Single core ,complete all as specified and as directed by Engr-in-charge.

M&L security light bracket made with GI pipe 40 mm dia light grade minium length 1.5 mtr long with 105 degree angle including necessary MS clamp made with 25mm x 5 mm and suitable MS studs and bolts ,complete all as specified and as directed by the Engr- in- Charge. Rate - Including fixing clamp and anchor fasterner for GI Steel tubing.

M&L for periodical testing and measuring the earth resistance value of the existing earthings / Down conductor / air terminal by means of wheat stone bridge method after disconnecting the earth continuity conductor from the test point , applying secondary voltage across the terminals, maintaining proper record of the measurement in presence of the users rep, MES rep, submitting the test records, pouring saline water in the earth pit to achieve low earth resistance, observing the same complete for monthly/Quarterly/Half yearly L2/L3 eqpts/E&M installations/Lightning arresters test ,complete all as specified and as directed by Engr-in-charge.

Taking down sub main wiring of any size complete and making good disturbed surface of walls/floors etc ,complete all as specified and as directed by Engr-in-charge.

M & L submain wiring with two single core through FR PVC insulated unsheathed stranded copper conductor 6 sqmm (nominal area) drawing through PVC coundit concealed and 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly Note : (i) Three lenght of wire along with conduit will be measured as one Length. (ii) Rates are deemed to include with cutting chases for conduit and sinking's for boxes and making good to walls, floors etc. ,complete all as specified and as directed by Engr-in-charge. Make: Make:Polycab/Havells/CCI/Gloster/KEI/Finolex

All as per item no 80 herein before but of size 2X4 sq mm and 1X2.5 sqmm

All as per item no 80 herein before but of size 2X2.5 sq mm and 1X1.5 sqmm

All as per item no 80 herein before but of size 2X1.5 sq mm and 1X1.5 sqmm

M & L submain wiring with two single core through FR PVC insulated unsheathed stranded copper conductor 6 sqmm (nominal area) drawing through PVC capping casing and 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connecting with main earth dolly Note : (i) Three lenght of wire along with conduit will be measured as one Lengt. (ii) Rates are deemed to included with cutting chases for conduit and sinking's for boxes and making good to walls, floors etc. Make: Make:Polycab/Havells/CCI/Gloster/KEI/Finolex

All as per item no 84 herein before but of size 2X4 sq mm and 1X2.5 sqmm

All as per item no 84 herein before but of size 2X2.5 sq mm and 1X1.5 sqmm

All as per item no 84 herein before but of size 2X10 sq mm and 1X6 sqmm

Taking down unserviceable DB/MCCB/MCB of any capacity and making good disturbed surface of wall/floor complete all as specified all as directed.

S & F LoadlineDistribution board, TP&N vertical, with Bus bars, 200A, 415V CapNetural links,blanking plates, double door 12 way, with MCCB 63 to 100 Amps as incommer and SP/DP/TP MCB as outgoing and electrically connecting up ,complete all as specified and as directed by Engr-in-charge. Make : Havells/Benlo/Legrand/Standered/Schneider/Indo asian

S & F Loadline Distribution board, TP&N vertical, with Bus bars, 200A, 415V CapNetural links,blanking plates, double door 8 way, with MCCB 63 to 100 Amps as incommer and SP/DP/TP MCB as outgoing and electrically connecting up ,complete all as specified and as directed by Engr-in-charge. Make : Havells/Benlo/Legrand/Standered/Schneider/Indo asian

S & F Loadline Distribution board, TP&N vertical ,with Bus bars, 200A, 415V Netural links,blanking plates, double door 4 way, with MCCB 63 to 100 Amps as incommer and SP/DP/TP MCB as outgoing and electrically connecting up ,complete all as specified and as directed by Engr-in-charge. Make : Havells/Benlo/Legrand/Standered/Schneider/Indo asian

S & F Distribution board, SP&N ,Prewired ,Netural links,blanking plates, double door 6 way, with provision for MCB SP&N as incommer and SP/DP MCB as outgoing and electrically connecting up ,complete all as specified and as directed by Engr-in-charge. Make : Havells/Benlo/Legrand/Standered/Schneider/Indo asian

S & F Distribution board, SP&N ,Prewired ,Netural links,blanking plates, double door 8 way, with provision for MCB SP&N as incommer and SP/DP MCB as outgoing and electrically connecting up ,complete all as specified and as directed by Engr-in-charge. Make : Havells/Benlo/Legrand/Standered/Schneider/Indo asian

S & F Distribution board, SP&N, Prewired ,Netural links,blanking plates, single door 12 way, with provision for MCB SP&N as incommer and SP/DP MCB as outgoing and electrically connecting up ,complete all as specified and as directed by Engr-in-charge. Make : Havells/Benlo/Legrand/Standered/Schneider/Indo asian

S & F MCB SP 6 to 32 Amps 240 volts 50 HZ having 10 KA ,complete all as specified and as directed by Engr-in-charge. Make : Havells/Benlo/Legrand/Standered/schneider/Indo asian

S & F MCB SPN 40 Amps 240 volts 50 HZ having 10 KA ,complete all as specified and as directed by Engr-in-charge. Make :Havells/Benlo/Legrand/Standered/schneider/Indo asian

S&F MCB SPN 240 volt,50Hz,63 Amp,C Curve,10kA breaking capacity ,complete all as specified and as directed by Engr-in-charge. Havells/Benlo/Legrand/Standered/schneider/Indo asian

S & F MCB TP 40 Amps 240 volts 50 HZ having 10 KA ,complete all as specified and as directed by Engr-in-charge. Make : Havells/Benlo/Legrand/Standered/schneider/Indo asian

S&F MCB TPN 415 volt 63 Amp,"C" Curve 16kA breaking capacity ,complete all as specified and as directed by Engr-in-charge. Make:Havells/Benlo/Legrand/Standered/schneider/Indo asian

S&F DB box with procted power unit rating 16-25 Amps 240volt 50HZ as per Havells cat part no-DHDUCDP0253016-25.Make : Havells or equivallent make of L&T/Legrand.

S & F RCCB DP 6 Amps 240 volts 50 HZ having ,complete all as specified and as directed by Engr-in-charge. Make : HavellsL&T/Legrand/ Standered/schneider/Benlo/Indo asian

Taking down the unserviceable MCCB, Supply and fixing MCCB TP pole with thermal Release range 40/63 Amps, 18KA, 415V, 50 Hz including extension bar for connection cable, ,complete all as specified and as directed by Engr-in-charge. Make : Havells/L&T/Legrand/ Standered/schneider/Benlo/Indo asian

Taking down the unserviceable MCCB, Supply and fixing MCCB TP pole with thermal Release range 100-125 Amps, 18KA, 415V, 50 Hz including extension bar for connection cable, ,complete all as specified and as directed by Engr-in-charge. Make : Havells/L&T/Legrand/ Standered/schneider/Benlo/Indo asian

Taking down the unserviceable MCCB, Supply and fixing MCCB TP pole with thermal Release range 160 Amps, 18KA, 415V, 50 Hz including extension bar for connection cable,,complete all as specified and as directed by Engr-in-charge. Make : Havells/L&T/Legrand/ Standered/schneider/Benlo/Indo asian

Taking down the unserviceable MCCB, Supply and fixing MCCB TP with thermal Release range 200/250 Amps bracking capacity 25KA, 415V, 50 Hz including extension bar for connection cable, ,complete all as specified and as directed by Engr-in-charge. Make : Havells/L&T/Legrand/ Standered/schneider/Benlo/Indo asian

Taking down the unserviceable MCCB, Supply and fixing MCCB TPN with thermal Release range 400Amps bracking capacity 25KA, 415V, 50 Hz including extension bar for connection cable ,complete all as specified and as directed by Engr-in-charge. Make : Havells/L&T/Legrand/ Standered/schneider/Benlo/Indo asian

M & L for cutting through concrete channels,grooves or rebates nex 15cm grith and trimming surface and make good the damage portion match with existing surface for laying any size pipe line ,complete all as specified and as directed by Engr-in-charge.

Taking down the unserviceable and Supply and fix in replacement street light timer digital type with 24 Hours operation settings including ML-4 contractor 63 Amps Three phase 430 volt AC with Control wiring of 6 Sqmm copper wire with TPN MCB of 63 Amps , 10 KA and 20 Amps single phase backlite fuse including sheet metal enclouser of 2mm thick with powder coating with mounting arragenets, angle iron frame and PCC foundation etc,complete all as specified and as directed by Engr-in-charge.

Taking down the unserviceable and Supply and fixing Single phase KWh meter with 1P LCD 5-30 Amps with optical port AC Single Phase Static Energy meter of Accuracy Class 1.0, 240V, 50Hz, with Backlit LCD Display, of rating 5-30A (Measures & Displays kWh,V,I,kW, six months history of Energy & MD in kW) with Transparent Hinge type Box all as directed.

Taking down the unserviceable and Supply and fixing Three phase 4 wire dir base mtg 240V 10-60 Amps KWh meter with 1P LCD with optical port Multifunction Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Optical + Modbus RS485 Communication, Backlit LCD Display of Rating -/5A. (Measures & Displays , Active & Apparent energy, Load survey , TOD & Power On/Off Events) all as directed. AC Three Phase Dual Source CT operated, AC sensing, Multifunction Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz, with Optical + Modbus RS485 Communication, Backlit LCD Display of Rating -/5A.(Measures & Displays , Active & Apparent energy, Load survey , TOD & Power On/Off Events)

Taking down carefully high mast light fittings from 20 mtr height pole mechanically including replacement of unserviceable parts with new ones and fixing the same its in own position including testing all fittings and control gear box 09 Nos, replace the old unsrviceable existing wiring with new conductor ,complete all as specified and as directed by Engr-in-charge.

Excavation in trenches, not exceeding 1.5m wide and n.exc 10 sqm on plan and n.exc 1.5m depth and getting out in hard/dense soil ,complete all as specified and as directed by Engr-in-charge.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 metre above the starting point ,complete all as specified and as directed by Engr-in-charge.

Returning filling in including spreading levelling, watering & well ramming in layers not exceeding 25 cm in soil,complete all as specified and as directed by Engr-in-charge.

Supply, spreading in trenches fine dry river sand for cable protection and removing down getting by hand ,complete all as specified and as directed by Engr-in-charge.

Supply and laying un reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches ,complete all as specified and as directed by Engr-in-charge.

Relaying un reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches ,complete all as specified and as directed by Engr-in-charge.

Taking out old unserviceable underground cable PVC insulated, PVC sheathed armored heavy duty aluminum conductor LT 1100 v grade, fixed on pole, wall and trenches etc after disconnecting of any size including cable cover ,complete all as specified and as directed by Engr-in-charge.

Supply & laying XLPE insulated , screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric power cable with aluminum conductor, 1100 V grade, ,complete all as specified and as directed by Engr-in-charge. of the following sizes: Make:Polycab/Havells/CCI/Gloster/KEI

2 core x 10 Sqmm

2 core x 16 Sqmm

4 core x 25 Sqmm

3.5 core x 35 Sqmm

3½ core x 50 Sqmm

Supply & laying GI pipe light graded of size 25mm dia in trenches and fixing on wall / pole with help of suitable size MS clamp for cable protection , complete all as specified and as directed by Engr-in charge.

Taking down and Supply and fixing insulating rubber mating chequare plate made out having electrical resistance of size 1000mmx2000mm with thickness 20mm suitable for use 22 KV working voltage,dielectric strength 40 kv with working temperature up to 50 degree centigrade ,complete all as specified and as directed by Engr-in-charge.

Earthing complete with copper earth plate electrode of size 600 x 600 x 3 mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to & including copper earth strip of size 20X3mm dia by means of GI bolts, nuts, washers, and connected to other end to main board duly protected by 15 mm bore GI light grade pipe from earth plate. Earth plate shall be surrounded by packed layer of coal dust 300mm and common salt 15 cm thick all around bottom and top. Watering pipe 20 mm bore of GI medium grade pipe and including funnel, wire mesh, CI cover & frame, PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in earthing pit including necessary excavation & earth work, all as specified & shown in electrical plate No. 5 of SSR Part – I. Rate are deemed to include 7.5 Mtr 20X3mm size copper strip Note : PCC/HDPE chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (ii). Earth resistance of earth pit should be less than 2 Ohms. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (iii) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of Copper plate. (iv) Soil investigation if required shall be carried out by contractor without any extra cost.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 2.5 sq mm, 2 core, 1100 Volts grade as per IS 694:1990 ,complete all as specified and as directed by Engr-in-charge.

Supply & fixing LED aviation light 30 watt made in cast aluminium spigot housing with decorative opal acrylic diffuser with IP-65 protection ,complete all as specified and as directed by the Engr- in- Charge. Make: Havells, helonix, C&S, Bajaj, philips, Wipro

M & L for connecting 1100 volt grade heavy duty cable PVC insulated copper conductor, served with inner sheathing of PVC tap and over all PVC sheathed in service connction for street light from FRP junction box to street light of size 3 core 1.5 Sqmm . ,complete all as specified and as directed by Engr-in-charge. Make: Paragon/HPL/Havells

Disconnecting the incomming and out going cable connection from unserviceable high mast LT panel. Dismelting the all MCCB, and other control equiptment, Measuring instrutment, Bus bar and internal cable /copper strip connection. Cutting the worn out sheet/angle and fabricated the new MS sheet/angle with match the existing size and shape. Scrapping the existing paint and repainting painting of the panel board with one coat of red oxide paint as a primer with two coat of synthetic enamel paint to match the existing colour.Refxing the serviceable controll equiptments and connected all incomming/outgoing cables all as directed. Note: (a)The replacement of the unserviceable items and frame work will be measured and paid seperately in respective items.

Taking down the unserviceable Power contractor, Supply and fixing 4 pole Power contractor type MCX,AC-1,rating 63 Amps,ML-4 including necessary connection ,complete all as specified and as directed by Engr-in-charge. Make:-Indo asian /Havells/HPL/BENLO/L&T/Standard/Legrand/ABB/Schneider

Taking down the unserviceable Power contractor, Supply and fixing 4 pole Power contractor type MCX,AC-1,rating 45 Amps,ML-3 including necessary connection ,complete all as specified and as directed. Make:-Indoasian /Havells/HPL/BENLO/L&T/Standard/Legrand/ABB/Schneider

Supply, perform, testing, commissioning of LT cable straight through joint kit heat shrinkable of 4 core x 10/16/25 Sqmm size,complete all as specified and as directed by Engr-in-charge. Make : Denson / M seal /Raychem

PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation of poles/struts etc ,complete all as specified and as directed by Engr-in-charge.

Material & labour for cement concrete type B1,(1:2:4) (using 20mm graded stone aggregate) in foundation filling and mass concrete and coping of poles including necessary form work and finishing the top surface of concrete ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing HOT moulded (FRP) junction box for street light pole with locking arrangement with IP 65 protection of size 280 x 200 with 32 Amp 4 way heavy duty terminal block with 10Amp MCB SP and two number of cable entry gland of standard size with suitable stainless steel bracket to fix with pole, including taking down existing ,complete all as specified and as directed by Engr-in-charge. .Make: Sintex/Hensel

Taking down Defective street light, flood light and bldg security light fitting of any Capacity and any watts, from their existing postion ie. Poles and bldg ,complete all as specified and as directed by Engr-in-charge. Note: LED Driver,SPD and 3 core cable for replacement shall be measured and paid separatly.

Supply only Surge protection device (SPD) of capacity 8 KV with phase ,neutral and earth wire in incoming and out going both sides ,complete all as specified and as directed by Engr-in-charge. Make: Bajaj/Havells/Crompton

Supply only Surge protection device (SPD) of capacity 5 KV with phase ,neutral and earth wire in incoming and out going both sides ,complete all as specified and as directed by Engr-in-charge. Make: Bajaj/Havells/Crompton

Supply only LED driver 30/45 W LED Street light Fitiing ,complete all as specified and as directed by Engr-in-charge. .Make: Bajaj/Havells/Shakti/C&S/CG/Plilips

Supply only LED driver 60 W LED Street light Fitiing ,complete all as specified and as directed by Engr-in-charge. Make: Bajaj/Havells/Shakti/C&S/CG/Plilips

Supply only LED driver 90 W LED Street light Fitiing complete all as specified and as directed.Make: Bajaj/Havells/Shakti/C&S/CG/Plilips

Supply only LED driver 120 W LED Street light Fitiing complete all as specified and as directed.Make: Bajaj/Havells/Shakti/C&S/CG/Plilips

Supply, fixing and testing LED Flood light fitting of 120 Watt in repair/replacement of existing high mast lights including LED lamps complete with body robust,corrosion resistant,superior finish and without any cracks or through holes,made in a single piece by high pressure die cast aluminium alloy.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD(I) less than 10% ,cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection.Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection,no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection.Cover should not degrade due to heating and ageing.The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report .Make: Havells, helonix, C&S, Bajaj, philips, Wipro

All as per Item No 140 above but 200 Watt

All as per Item No 140 above but 150/160 Watt

Supply, fixing and testing LED street light fitting of 45 Watt in repair/replacement of existing high mast lights including LED lamps complete with body robust,corrosion resistant,superior finish and without any cracks or through holes,made in a single piece by high pressure die cast aluminium alloy.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD(I) less than 10% ,cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection.Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection,no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection.Cover should not degrade due to heating and ageing.The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report .Make: Havells, helonix, C&S, Bajaj, philips, Wipro

All as per Item No143 above but 60 Watt

All as per Item No143 above but 90 Watt

All as per Item No 143 above but 120 Watt

Supply, fixing and testing Post top lantern of 25/45 Watt in repair/replacement of existing lights including LED lamps, acrylic, canopy totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD(I) less than 10% ,cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection.Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection,no load , open circuit and short circuit protection .LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 65 degree protection.Cover should not degrade due to heating and ageing.The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report including suitable size of GI pipe for post with PCC 1:3:6 complete all as specified and as directed by the Engr- in- Charge. Make: Crompton, helonix, Havells, philips, C&S, Bajaj, Wipro, Shakti

Atharva Enterprises

SAI SERVICE

NANGIA AND CO

M/s S.D Construction Co