REPAIR AND POLISHING/ PAINTING OF WOODEN/ STEEL FURNITURE OF VAYU VIHAR UNDER GE BRICHGUNJ, SRI VIJAYA PURAM

Charpoy IP Hard top (FD/MAP-II/01)

Taking down U/S ply top and S/F new ply top made of 12 mm thick comercial BWR ply Make Green ply/century/Kit ply all as shown on Drg.

Taking out U/S rubber shoe and S/F new hard rubber shoe size and shape exists all as shown on drg.

Preparation of surface with sand paper applying two coats of brown/black/off white/gray colour synthetic enamal paint over a coat of red oxide primer on steel surface of bed hard to match existing colour by spray gun paint with the existing complete all as specificed and as shown on drgs.Make of Paint - Asian/Nerocale/Burger

CHAIR VERANDAH (FD/E6/MAP/15)

M&L welding (Gas/Elect) in repair of leg, and stiffiner with fine finishing and standard workman ship and duly painted with two coat of white paint over a coat of red oxide primer all as specified and directed by Engineer-in- Charge.

Provn of stiffiner for the center seat of chair verandah made of conduit pipe 19mm dia, 1.6mm thick and 35mm long welded at center of both side seat and back of chair verandah all as specified and directed by Engr-in-Charge.

Taking out U/S PVC seat and back fram chair Verandah and S&F new PVC seat and back of Chair verandah as per shape and size as shown on drg. Make of PVC - Cello/Amco/Supreme

Preparation of steel surface with & including parts/ items repaired/replaced under item No 2.01 to 2.02 above and applying two coats of synthetic enamel white paint over a coat of red oxide primer complete all as specified and as shown on drgs.Make of Paint - Asian/Nerolac/Burger

Taking out old U/S rubber shoe and S&F new hard rubber shoe of 20 mm dia all as spcified and shown on drg.

ALMIRAH STEEL LARGE WITH SHELF (FD-1031, FD-67,FD-339 &351)

Taking down/out old unserviceable handle and Supply and fixing new chromium plate handle 100 mm long complete all as specified and as shown on drg .

Taking down/out old unserviceable lock and Supply and fixing new 6 lever brass lock godrej pattern complete all as specified and as shown on drg .

Taking down old shelves MS clamp incl removal of denting for the deshaped portion, welding etc as required and refixing in the same position complete all as specified and as shown on drg .

Taking down/out old lock cover and Supply and fixing new lock cover made of 16 gauge 1mm MS sheet complete all as specified and as shown on drg . Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Repair to door including replacement of hings all as shown on drawing and as directed by Engr-in-charge.

Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .Make of MS Sheet - Tata/Surya/Jindal/Prakash,

Taking down/out old unserviceable shelves and Supply and fixing new shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Removal of denting for the deshaped portion of almirah large steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 3.03 to 3.06 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green/off white synthetic enamel paint on the internal and external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg. Make of Paint - Asian/Burger/Nerolac.

ALMIRAH STEEL MEDIUM WITH SHELF (FD-1032 , 243 & FD-350)

Taking down/out old unserviceable handle and Supply and fixing new chromium plate handle 100 mm long complete all as specified and as shown on drg

Taking down/out old unserviceable lock and Supply and fixing new 6 lever brass lock godrej pattern complete all as specified and as shown on drg .Make of Lock - Lico/RIna/Hettich

Taking down old shelves MS clamp incl removal of denting for the deshaped portion, welding etc as required and refixing in the same position complete all as specified and as shown on drg .

Taking down/out old lock cover and Supply and fixing new lock cover made of 16 gauge 1mm MS sheet complete all as specified and as shown on drg . Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Repair to door including replacement of hings all as shown on drawing and as directed by Engr-in-charge

Taking down /out old worn out legs and Supply and fixing of legs made of 18 gauge of MS sheet complete all as specified and as shown on drg .Make of MS Sheet - Tata/Surya/Jindal/Prakash,

Taking down/out old unserviceable shelves and Supply and fixing new shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg .Make of MS Sheet -Tata/Surya/Jindal/Prakash,

Removal of denting for the deshaped portion of almirah large steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 3.01 to 4.07 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green/off white synthetic enamel paint on the internal and external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg. Make of Paint - Asian/Burger/Nerolac.

Chair Easy (FD-229)

Opening of joints and removing of old front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair all as specified in drawing.

All as per item ser No 5.01 but rear legs

All as per item ser No 5.01 but stiffener

All as per item ser No 5.01 but side rail

All as per item No 5.01 but back support

All as per item ser No. 5.01 but handle

All as per item ser No. 5.01 but konai

Taking out unserviceable caning and S&F new recanning of chair easy of 2mm wide oval shape of cane white colour and godrej pattern board side 4mm wide cane all as per specified and as shown on drg.

Preparation of surface with glinder sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 5.01 to 5.07, to the required gloss to match with the existing complete all as specified and as shown on drg.

TABLE PEG (FD-277, 236 & FD-384)

Taking out old unserviceable top and Supply and fixing new top of size 450x300mm of 18/19mm thick pre-laminated MDF board both side teak colour ,exterior grade, duly covered with 6mm thick teak wood beading all around complete all as specified and as shown on drg .Make - Novapan/Century/Greenply/Action Tessa

Taking out old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size.

All as per item No. 6.02 above but long rail of table peg

All as per item No. 6.02 above but short rail of table peg

All as per item No. 6.02 above but side stiffiner of table peg

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and side rail of the table fixed with screw to provide more strength.

Taking down old U/S hard pvc ring and S/F new hard pvc ring for each leg with fixed 2mm screw of table dining.

Preparation of surface with glinder sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 6.02 to 6.06, to the required gloss to match with the existing complete all as specified and as shown on drg.

Table Bed Side MAP (FD/E6/MAP/15)

Taking out old unserviceable top and Supply and fixing new top of size 450x450mm of 18mm thick pre-laminated MDF board both side teak colour ,exterior grade, duly covered with 6mm thick teak wood beading all around complete all as specified and as shown on drg .Make - Novapan/Century/Greenply/Action Tessa

All as per item 7.01 above but sides

All as per item 7.01 above but bottom

Removing of existing unserviceable Back of Table Bed Side MAP and providing new Back of size 460mm x 440mm with 6mm plywood commercial fixed with headless nail, rest all as shown on drg and as directed by the Engr-in-Charge. Make - Century Ply/ Greenply/ Kitply

All as per item No 7.01 above but pull out try

All as per item No. 7.01 above but side drawer

All as per item No. 7.01 above but front drawer

All as per item No. 7.01above but bottom drawer

Taking down old unserviceable handle and supply and fixing new cp handle 75mm long shape and size complete all as specified and as shown on drg.

Table Dining 1200x900mm

Taking out old unserviceable top and Supply and fixing new top of size1200x900mm of 18 mm thick pre-laminated MDF board both side teak colour ,exterior grade, duly covered with 6mm thick teak wood beading all around complete all as specified and as shown on drg .Make - Novapan/Century/Greenply/Action Tessa

Taking out old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size.

All as per item No. 8.02 above but short rail

All as per item No. 8.02 above but long rail

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and side rail of the table fixed with screw to provide more strength.

Taking down old U/S hard PVC ring and S/F new hard pvc ring for each leg with fixed 2mm screw of table dining

Preparation of surface with glinder sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 8.02 to 8.06, to the required gloss to match with the existing complete all as specified and as shown on drg.

CHAIR DINING (MAP) JCO/ORS (FD/E6/MAP/05)

Opening of joints and removing of old front leg and S&F new front leg (left/right) made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size duly french polished new and old surface of chair all as specified in drawing.

All as per item No 9.01 but rear legs

All as per item No 9.01 but stiffener

All as per item No 9.01 but side rail

All as per item No 9.01 but back support

Provn of stiffiner (teak wood ) of size 25mm x25mm and 35 mm long seasoned teak wood between side rail of the chair fixed with screw to provide more strenghth. of PVC seat .

Provision of Konia (wooden Bracket) of size 3"x3" seasoned teak wood 1" thick in between leg and side rail of the chair fixed with screw to provide more strength.

Taking out unservicable PVC seat of chair dining and supply and fixing new PVC seat 5mm thick white/cream colour fix of chair bottom all as directed.

Preparation of surface with glinder sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 9.01 to 9.07, to the required gloss to match with the existing complete all as specified and as shown on drg.

Dressing Table Ladies including stool (FD/E6/MAP/07)

Taking out existing old unserviceable foggi fadded looking mirror size 1200x380mm x 5mm thick with frame and S&F new looking mirror of same size and shape make : ATUL/MODI Guard duly framed with 1st class seasoned teak wood and back of mirror shall be completed and all as spceified and shown on drg.

Taking down old unserviceable drawers and supply & fixing new drawer of front, side and back of 18mm thick pre laminated MDF board extirior grade both side teak colour with including 4mm thick teak wood beading of all around of drawer and smooth functioning of drawer size and shape as exists complete all as specified and as shown on drg.

All as per item No 10.02 above but existing table top

All as per item No 10.02 above but bottom

All as per item No 10.02 above but sides

Taking down old unserviceable knob and supply and fixing new decorative knob 40mm dia shape and size complete all as specified and as shown on drg.

All as per item No 10.02 but sides and back of stool dressing

Replacement of existing U/S cushion of chair dining with new foam cushion of size 40 density 75mm thick duly covered with tapestry cloth/ raxine and bottom side 12mm thick plywood including with stitching, rest all as shown on drg and as directed by the Engr-in-Charge. Note :- (i) Each cushion for seat will be measured as single unit. (ii) The tapestry cloth raxine shall be mat finish and rate of tapestry cloth shall not less than Rs. 450/- per Sqm and as approved by GE. Make:-Sleepweel/ Kurlon of approved make

Taking out existing old unserviceable wheels and supply & fixing of new 50mm dia heavy duly revolving nylon wheels in stool dressing

Material and labour preparation of lod wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper abbrasive colth thoroughly for smooth and clean surface and applying two coats french polish over a coat of wax to the depressed surface for smooth finishing complete all shown on drawing and directed.

Mirror Dressing Gents ((FD/E6/MAP/16)

Taking out existing old unserviceable foggi fadded looking mirror and Supply and fixing new looking mirror 5.5mm thick of size 750x600mm with full frame all as shown on drg.

Taking Out Existing unserviceable glass panes and supply & fixing of new 03 Nos of 5.5mm glass shelves supported on runners/ Glass holders

Taking out old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size complete all as specified on drg.

All as per item No 11.03 but frame of size 50 x 28mm of Mirror Dressing Gents

Taking out unserviceable ply wood of back side of Mirror and S&F of new commercial ply of 12mm size 750 x 600mm

Taking out unserviceable Box and S&F on new box of size 750x600mm made out of 18mm prelaminated particle Board for Mirror Dressing Gents

Taking Out unserviceable Hings and S&F of new Hinges of 75mm in Mirror Dressing Gents

Material and labour preparation of lod wood surface by scraping and filling bore holes with putty and finally rubbing with sand paper abbrasive colth thoroughly for smooth and clean surface and applying two coats french polish over a coat of wax to the depressed surface for smooth finishing complete all shown on drawing and directed by the Engr-in-Charge.

LOCKER BED SIDE STEEL (FD-257/1029)

Taking down old unserviceable conduit pipe and Supply and fixing new conduit pipe 20mm dia of shape and size complete all as specified and as shown on drg .

Taking down/out old unserviceable handle and Supply and fixing new chromium plate handle 100 mm long complete all as specified and as shown on drg

All as per items No 12.02 above but Locker bed side steel

Taking down old unserviceable hasp & staple and Supply and fixing new MS hasp and staple ,100mm size complete all as specified and as shown on drg .

Repair to door including replacement of hings all as shown on drawing and as directed by Engr-in-charge

Removal of denting for the deshaped portion of almirah large steel , cleaning of rusted surfaces with & including parts/ item repaired/replaced under item No 3.03 to 3.06 above including preparation of patches by applying putty etc and applying two coats of paint AD grey/Olive green/off white synthetic enamel paint on the internal and external surfaces by spray gun over a coat of red oxide primer complete all as specified and as shown on drg. Make of Paint - Asian/Burger/Nerolac

SOFA SET 4/5 PERSON WITH CUSHION (TP)

Replacement of exisiting U/s foam cushion of Sofa set with new foam cushion of size 40 density 100mm thick duly covered with tapestry/raxien with stitching, rest all as shown on drg and as directed by Engr-in-Charge. Note :- (i) Each foam cushion for seat or back will be measured as single unit.

Removing the existing unseviceable front leg from Sofa and providing replacement new leg as directed by the Engr-in-Charge

Removing the existing unservicable rear leg from Sofa and providing replacement rear leg as directed by the Engr-in-Chage

TABLE WITH DRAWER 900x 600 x 760mm (FD-224 & 283)

Taking out old unserviceable top and Supply and fixing new top of size 900x600mm of 18 mm thick pre-laminated MDF board both side teak colour ,exterior grade, duly covered with 6mm thick teak wood beading all around complete all as specified and as shown on drg .Make - Novapan/Century/Greenply/Action Tessa.

Taking out old U/S legs and S&F new legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents as per shape and size.

Taking down/out old unserviceable handle and Supply and fixing new chromium plate handle 100 mm long complete all as specified and as shown on drg

All as per item No. 14.02 above but long rail of table with drawer

All as per item No. 14.02 above but side stiffiner of table

All as per item No. 14.02 above but centre stiffiner

Supply and fix in repairs to unserviceable damaged drawers of size 300mm x 30mm x 18mm for table with drawer made out of pre-laminated MDF Board both side teak colour with including providing 6mm thick commercial ply to bottom of drawer complete, rest all as shown on drg and as directed.

Taking down old U/S hard pvc ring and S/F new hard pvc ring for each leg with fixed 2mm screw of table dining.

Preparation of surface with glinder sand paper after scrubbing and French polishing to chair dining and including to the parts repaired/replaced under item No 14.2 to 14.7 to the required gloss to match with the existing complete all as specified and as shown on drg.

Material and labour preparation of old wood surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth thoroughly for smooth and clean surface and applying two coats of french polish over a coat of wax to the depressed surface for smooth finishing complete all as shown on drawing and as directed by the Engineer-in-charge. for the following furniture articles:-

Peg Table [FD-236,FD-277 & FD-384)

Table dining 1200x900mm(MAP-03)

Table centre [FD-274 / 235]

Chair Easy [FD-229

Chair Writing [FD-280

Chair Dining JCOs/OR (MAP-05)

Removing Dents and Bends and welding wherever required Scrapping old painted surfaces and removing existing paint on surfaces with chemical /aerosal spray. Preparation of surfaces after applying putty to cover uneven surfaces, apply a coat of red oxide primer and spray painting with two coats of synthetic enamel paint . Colour :- as directed by Engg-in-Charge .Make for paint:- Asian/Berger/Nerolac Note :- as a whole shall be measured as single unit.

(a) Alimirah steel large with Shelves (FD-1031)

(b) Almirah steel medium with shelves (FD-1032)

(c) Locker Bed side steel (FD-257, FD-1029, CE/SK/619)