REPAIR TO FLOOR, JOINERY, SANITARY FITTINGS AND ROOFING IN GIRLS AREA, KLAPATARU, OFFICERS AREA, YEP BLOCK AND FLAG AREA AT DGNCC CAMP INTHE AREA OF AGE BR III UNDER GE (EAST) DELHI CANTT-10

Amount

Demolition, Cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each and removing from site, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each and removing from site, complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 Sqm and not exceeding 2 Sqm each and removing from site, complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as as in window or door cills, lintels, bressumers, steps, quoins blocks (for use with masonry), string courses, copings, kneelers, apex stones, packing on the sides etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete all as specified and as directed.

Pre-cast cement concrete (1:2:4), type B-O, using 12.5mm graded stone aggregate as in 50mm thick louvers and jallies, including mouldings & frame work, set in cement mortar 1:4, complete all as specified and as directed.

Brick work with sub class “B” bricks straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6 using old size bricks, complete all as specified and as directed.

18-20mm thick Granite stone slab (table rubbed and polished) in steps, shelves, and the like not less than 1Sqm (in one piece), laid over 20mm thick layer of cement mortar 1:3 after rougheniung of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including moulding of edges, including demolition of existing unusable stone slabs/tiles fixed in cement mortar, complete all as specified and as directed.

Factory made flush shutter 40mm thick, Solid core construction with Block board and plywood face pannels, commercial type on both sides, complete all as specified and as directed.

Glazed and Skelton shutters using 2nd class hard wood, 35mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

Solid PVC door frame of size 50mm x 95mm made out of 5mm plain coloured PVC sheet reinforced with MS squqre tube. complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 Kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx2.1mm, shutter top section 47.62mm x 44.45mmx1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 kg/RM) incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.

Aluminium alloy Powder coated standard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighing 0.55 kg/m, rectangular frame of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg.m including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges etc., as per standard fittings, complete all as specified and as directed.

Welding of 100mm size butt hinges (medium weight) colled rolled mild steel for fixing to old mild steel chowkats or frames including removing old rusted and damaged butt hinges and fixing loose mullions of mild steel chowkats with cement work to make good disturbed surface to match the exisitng surface, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel, complete all as specified and as directed.

100mm size butt hinges (medium weight) colled rolled mild steel, fixed in repairs, complete all as specified and as directed.

100mm size butt hinges stainless steel, complete all as specified and as directed.

Mild steel pressed handle oval type, stove enamelled black of size 150mm size, fixed in repairs, complete all as specified and as directed.

Mild steel pressed handle oval type, stove enamelled black of size 125mm size, fixed in repairs, complete all as specified and as directed.

Mild steel barrel tower bolt stove enamelled black with bright bolt, of size 150mm, and fixed in repairs, complete all as specified and as directed.

Mild steel barrel tower bolt stove enamelled black with bright bolt, of size 125mm, fixed in repairs, complete all as specified and as directed.

300 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, fixed in repairs, complete all as specified and as directed.

250 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, fixed in repairs, complete all as specified and as directed.

Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm, fixed in rtepairs, complete all as specified and as directed.

Aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 61 to 80 kg, fixed in repair, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel doors and widows with necessary 12mm iron flats with welding, fixed in repairs, complete all as specified and as directed.

Mild steel framed work as in doors (as in chowkats) or gates of angle or other section with gusset plates, rails, braces etc., exclusive of steel sheeting or other covering, hanging or fastening and fixing complete conforming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of old AC corrugated/semicorrugated sheets, complete all as specified and as directed.

Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, including dismantling of old AC corrugated/semicorrugated sheets, complete all as specified and as directed.

Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Applying APP based polymeric mambrane minimum weight 3.6kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. Over the APP membrane finally applying a coat of Solar reflective Paint @ 0.30Ltr/Sqm complete all as specified and as directed.

E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and as directed.

50mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made, any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with no pigments to match colour of blocks in floors laid over 30mm thick sand cushioning, including demolition of old paver blocks with backing, complete all as specified and as directed.

Chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 25mm thick, set, jointed in neat cement slurry and pointed flush with grey cement and no pigments to match colour of blocks in floors over 15 mm thick screed bed or bedding layer in cement mortar 1:4, including demolition of old tiles with backing, complete all as specified and as directed.

Machine cut kota stone slab 18-20mm thick as in floors laid, bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish complete including screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes, including demolition of old stone flooring with backing, complete all as specified and as directed.

Cutting and polishing of kota stone flooring and skirtings, including cleaning of splashes of cut kota stone materials om walls and applying OBD/lime wash to match the exisitng treatment as per site requirement, complete all as specified and as directed.

75mm thick plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top without using extra cement and providing joints 40mm deep and 12 mm wide in plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as and as directed.

Vitrified coloured ceramic tiles dark shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Vitrified coloured ceramic tiles dark shade 10mm thick (square/rectangular) polished, area of tiles exceeding 0.42Sqm but not exceeding 1.00Sqm each tile in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Anti skid ceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.11Sqm but not exceeding 0.18Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4, including dismantling of old tiles with backing, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 450mm x 300mm x 7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in cement mortar 1:4, including dismantling of old tiles with backing, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and fair without using extra cement, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and as directed.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including cuttng grooves, complete all as specified and as directed by Engr-in-Charge.

Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall primer applied over a layer of J K white/Birla white wall care putty, complete all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two coats of cement based paint over a coat of wall primer, complete all as specified and as directed.

Preparation of old treated plastered or unplastered surfaces of walls including brooming down or scrapping down with steel wire brushes of smoke, soot, moulds, moss, efflorescent salts and treading oil and greasy spots, filling the cracks, holes with putty and applying one coat of oil bound distemper, complete all as specified and as directed.

Preparation of old treated plastered or unplastered surfaces of walls including brooming down or scrapping down with steel wire brushes of smoke , soot, moulds, moss, efflorescent salts and treading oil and greasy spots, filling the cracks, holes with putty and applying one coat of exterior emulsion weather shield paint, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of old treated wooden surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed.

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out old glass panes in wooden/metal frames including fixing beading/putty, complete all as specified and as directed.

Sheet glass 5.50mm thick ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane including hacking out old glass panes in wooden/metal frames including fixing beading/putty, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down GI tubing 15mm bore and connections complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down GI tubing 15mm bore and connections complete all as specified and as directed.

Brass spindle (number 1, 2, 3, 4, 5, 6) suitable for 15 mm bib cock / stop cock/ concealed stop cock/ angle cock, wall mixture, WHB Mixture fixed in repairs, complete all as specified and as directed.

Bib taps cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore, fixed in repairs, complete all as specified and as directed.

Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore, fixed in repairs, complete all as specified and as directed.

Stop valve cast copper alloy fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore, fixed in repairs, complete all as specified and as directed.

15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe, fixed in repairs, (Minimum weight 15mm-90gms), complete all as specified and as directed.

15mm bore angle cock standard of PTMT any colour high pressure screwed for iron pipe, fixed in repairs, (Minimum weight 15mm-90gms), complete all as specified and as directed.

Counter type vitreous chinaware wash hand basin (WHB) white, of size 550mm x 400mm, including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc., fixed in repairs, complete all as specified and as directed.

32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc., fixed in repairs, complete all as specified and as directed.

15mm dia 600mm long PVC connection with brass nuts on both ends, fixed in repairs, complete all as specified and as directed.

Plastic water closet seat and cover of white colour, closed pattern with flat bottom suitable for pedestral / Semi pedestral pattern water closets and mild steel chromium plated or aluminized hinging device, fixed in repairs, complete all as specified and as directed.

Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified and as directed.

Sinks with drainage board made of stainsless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified and as directed.

Brass chromium plated wall mixture 3 in 1 suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed.

Brass chromium plated Wash Hand Basin Mixer suitable for 15mm bore GI pipe joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed.

75mm dia brass chromium plated shower rose with neck and swivel joints fancy type suitable for 15mm bore GI pipe, fixed in repairs, complete all as specified and as directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long, fixed in repairs, complete all as specified and as directed.

Health faucet with one metre long flexible tube in chrome finish fixed in position with brass chromium plated nuts for 15mm bore tubing, fixed in repairs, complete all as specified and as directed.

PVC valve less syphonic action type flushing cistern, low level, 10 litres capacity including flush pipe PVC connection, float valve, PVC handle/button and connections complete including taking down old unserviceable flushing cistern any type, fixed in repairs, complete all as specified and as directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe15mm dia( minimum weight 142 gms), suitable for fixing to 500/1000 Ltrs Water Tanks, fixed in repairs, complete all as specified and as directed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia( minimum weight 210 gms), suitable for fixing to 500/1000 Ltrs Water Tanks, fixed in repairs, complete all as specified and as directed.

15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs, complete all as specified and as directed.

20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs, complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks 500 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description, complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks 2000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks 5000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description, complete all as specified and as directed.

Water closet squatt pan (Orissa Pattern) complete including provision of lime concrete bedding Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc., fixed in repairs, complete all as specified and as directed.

Vitreous china urinal half stall type white incl providing and fixing plugs, beading urinal against wall in CM 1:2, securing urinal with plugs with a screw pointing around urinal etc., fixed in repairs, complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pattern) excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, complete all as specified and as directed.

Vitreous china Glazed urinal partition white of size 310x770mm, fixed in repairs, complete all as specified and as directed.

Cleaning old sewage lines any dia with Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and desludging of sewage line, soak wells, septic tanks etc., shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. ( NOTE : a) In case contractor fails to deploy the machine as per scheduled programme a recovery of Rs 1500/- per day shall be deducted from his payment. b) Per day means 8 working Hrs in a day excluding standby period due to any reason.)

Taking down carefully copper/ aluminum Point Wiring light/fan/bell/ socket/power complete including conduit fittings and making good the disturbed surfaces of Walls/floors ceiling, complete all as specified & as directed by Engr- in- charge.

Point wiring with FRLS PVC insulated stranded copper conductor 1.5Sqmm cable through existing steel /PVC concealed conduit and existing CI/MS terminal boxes with new 3mm thick hylem sheet with screw, cup washers etc for fixing switch, socket, regulator etc. including single core FRLS PVC copper conductor cables 1.5Sqmm as earth continuity wire connected to common earth and earth dolly complete all as specified and as directed by the Engr-in- charge for the following:- One light point or one fan point or bell point controlled by one switch SP, one way, 230 volts.

All as per description of Srl item No.- 93 here-in-before but One 3 pin socket outlet 5/6 Amps on same board, complete all as specified and as directed.

All as per description of Srl item No.- 93 here-in-before but One socket outlet 5/6 Amps on independent board, complete all as specified and as directed.

All as per description of Srl item No.- 93 here-in-before but for power socket 15/16 Amp with cable 2.5Sqmm for phase & neutral for earth 1.5Sqmm, complete all as specified and as directed.

Point wiring with FRLS PVC insulated stranded copper conductor cable on PVC Casing/ Caping with FRLS PVC copper conductor cables 1.5Sqmm and one run of 1.5Sqmm cable as earth continuity wire connected to common earth with new 3mm thick hylam sheet with screw,cup washers etc including pvc terminal box, junction box, bends, tees, reducer etc for fixing switch,socket, regulator etc. complete all as specified and as directed by Engineer-in-Charge :- One light/fan point controlled by one, one way switch

All as per description of Srl item No.- 97 here-in-before but one 3 pin socket outlet 5 Amp on the same board with other switches, complete all as specified and as directed.

All as per description of Srl item No.- 97 here-in-before but independent socket 3 pin 5 Amp, complete all as specified and as directed.

All as per description of Srl item No.-97 here-in-before but One socket outlet 15 amp independent but using 2.5Sqmm stranded copper conductor incl FRLS PVC insulated 1.5Sqmm earth to common earth and to earth dolly, complete all as specified and as directed.

Point wiring complete with 1.5Sqmm (nominal area) FRLS, PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers except conduit junction box (junction box will be of MS) including FRLS, PVC insulated unsheathed 1.5Sqmm copper earth wire, connecting to common earth dolly with and including Metal flush box of suitable size for fixing modular switches/sockets/fan regulator etc., with and including Modular cover plates of suitable size and making good surface as original by plastering, whitewash/colour and distemper etc complete all as directed for the following :- One light/fan point controlled by one, one way switch. (Note : The cost of modular type Metal boxes and modular accessories like cover plates will be included in quoted rate.)

All as per description of Srl item No.- 101 here-in-before but One 3 pin 6 Amps socket outlet independent controlled by one switch, complete all as specified and as directed.

All as per description of Srl item No.- 101 here-in-before but for one 3 pin 6 Amps socket outlet on the same board with other switches, complete all as specified and as directed.

All as per description of Srl item No.- 101 here-in-before but 2.5Sqmm cable with 2.5Sqmm earth wire complete all as specified and as directed.

Replacement of switch piano flush type 5 Amp SP one way, complete all as specified and as directed.

Replacement of switch piano flush type 5 Amp SP two way, complete all as specified and as directed.

Replacement of switch piano type 15 Amp SP one way, complete all as specified and as directed.

Replacement of socket outlet 2-in-1, 5 Amps flush type 3 pin 5 Amps multi purpose, complete all as specified and as directed.

Replacement of socket outlet 2 in 1 (multipurpose) 3 pin 5 and 15 Amp flush mounted type, complete all as specified and as directed.

Replacement of ceiling rose surface bakelite 65 x 50 mm with two to three terminals, complete all as specified and as directed.

Make for item No. 105 to 110 : Havells Reo / Great white / SSK switch

Replacement of Modular switch 6 Amp, 1 way, 1 module size, complete all as specified and as directed.

Replacement of Modular switch 16 Amp, 1 way, 1 module size with indicator lamp, complete all as specified and as directed.

Replacement of Modular socket 6 Amp, 2/3 pin, shuttered type, 2 module size, complete all as specified and as directed.

Replacement of Modular socket 16 Amp mulipurpose shuttered type, 3 module size, complete all as specified and as directed.

Make for item No. 112 to 115 : Indoasian (Elvira/Glint) or Legrand (Mylinc) or Schneider (Livia)

Replacement of wall light fitting comet type with and including 9 watt LED lamp, complete all as specified and as directed. Make :Philips cat part No.30575 or Wipro Garnet or Havells Floret/Stylo

Replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 12Watts, cool/warm white as per site requirement, ccomplete all as specified and as directed. Make Havells (E-Lite) or equivalent in Syska/Polycab/Wipro.

Replacement of Recess/Surface mounting 2x2 square flat panel ultra slim scoop LED light 36/40 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling including making electric connection, complete all as specified and as directed. Make: Syska/havels/philipsC&S/Polycab

Replacement of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 22Watts, cool/warm white as per site requirement, complete all as specified and as directed. Make : Havells (E-Lite) or equivalent in Syska/Polycab/Wipro.

Replacement of post top lantern light fitting comprising of milky white PVC globe dia 200 mm and gallary suitable for mounting on 32/40 mm GI pipe with 9Watt LED lamp B22 base including necessary electric connections, complete all as specified and as directed. Make : Havells Moon (Opal) or equivalent in Philips/Wipro

Replacement of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver, complete all as specified and as directed. Make : Havells (Endura pearl Neo or equivalent in Philips/Wipro

Replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 25/32 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Replacement of LED bulbs 9W, B- 22/E14/E27 90-300V AC-50 Hz, complete all as specified and as directed.

Replacement of LED Halogen light fitting 50 W, AC 230V, 50 Hz, complete all as specified and as directed.

Replacement of LED Dimmer light 400W, AC 230V, 50 Hz, acomplete all as specified and as directed.

Replacement of Halogen lamp - 500W, AC 230V, 50 Hz, complete all as specified and as directed.

Replacement of Halogen lamp -1000 W, AC 230V, 50 Hz, complete all as specified and as directed.

Replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting, complete all as specified and as directed.

Replacement of piano type Step fan regulator, 120 watts single/ double module, complete all as specified and as directed.

Replacement of flexible wire 23/.0076 three core, complete all as specified and as directed.

MCB DB confirming to IP 43 - IK 09 with single door, SPN 02 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection and making good the disturbed surfaces, complete all as specified and as directed. Make : Legrand/Siemens/IndoAsian

MCB DB confirming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection and making good the disturbed surfaces, complete all as specified and as directed. Make : Legrand/Siemens/IndoAsian

MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection and making good the disturbed surfaces, complete all as specified and as directed. Make : Legrand/Siemens/Indoasian

MCB DB confirming to IP 43 - IK 09 with double door, SPN 12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection and making good the disturbed surfaces, complete all as specified and as directed. Make : Legrand/Siemens/Indoasian

Replacement of MCCB incommer Distribution Board (Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB, complete all as specified and as directed. Make : Legrand/Havells/Indoasian. Note:- MCCB & MCBs will be measured and paid separately

Replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 08 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB, complete all as specified and as directed. Make : Legrand/Havells/Indoasian. Note:- MCCB & MCBs will be measured and paid separately.

Replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed. Make : L&T / Legrand Lexic/ IndoAsian/Havells.

Replacement Isolator SPN 40 A including connections, complete all as specified and as directed. Make : L&T / Legrand Lexic/ IndoAsian/Havells.

Replacement Isolator SPN 63 A including connections, complete all as specified and as directed. Make : L&T / Legrand Lexic/ IndoAsian/Havells.

Replacement Isolator TPN 63 A including connections, complete all as specified and as directed. Make : L&T / Legrand Lexic/ IndoAsian/Havells.

Replacement Isolator TPN 100 A including connections, complete all as specified and as directed. Make : L&T / Legrand Lexic/ IndoAsian/Havells.

Replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed. Make : Anchor/Havells/Legrand

Replacement of single pole and neutral metal clad sheet steel enclosures with 2 pin and earth plug and socket complete with MCB SP 20 Amps, complete all as specified and as directed.

Replacement of aluminum lugs bottle type upto 16 to 70 Sqmm size including crimping and taping in different colours as per colour code, complete all as specified and as directed.

Replacement of change over switch off load type, AC, 415Volts, TPN, 63 Amp side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed. Make ; Havells/Legrand/L&T.

Replacement of change over switch off load type, AC, 415Volts, TPN, 100 Amp side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed. Make ; Havells/Legrand/L&T.

Replacement of change over switch off load type, AC, 415Volts, TPN, 200 Amp side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed. Make ; Havells/Legrand/L&T.

Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5Sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed. Make : Polycab/Havells/Finolex/RR Kabel

Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 2.5Sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed. Make : Polycab/Havells/Finolex/RR Kabel

Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 6.0Sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed. Make : Polycab/Havells/Finolex/RR Kabel

Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 10.0Sqmm, 1100 volts grade cable, FRLS, complete all as specified and as directed. Make : Polycab/Havells/Finolex/RR Kabel

Replacement of cable in trenches of size 6Sqmm, 2 core 1100 volts grade armoured with aluminium conductor ISI marked, complete all as specified and as directed. (Note : GI pipe for cable protection, sand cushioing GI pipe for cable protaction, sand cushioning shall be measured and paid respective items)

Replacement of cable in trenches of size 10Sqmm, 2 core 1100 volts grade armoured with aluminium conductor ISI marked, complete all as specified and as directed. (Note : GI pipe for cable protection, sand cushioning and excavation are out of the scope of these items and shall be measured and paid respective items)

Replacement of LT XLPE cable in trenches of size 16Sqmm, 2 core 1100 volts grade armoured with aluminium conductor ISI marked, complete all as specified and as directed. (Notre: GI pipe for cable protection, sand cushioning shall be measured and paid respective items)

Replacement of LT XLPE cable in trenches of size 25Sqmm, 4 core 1100 volts grade armoured with aluminium conductor ISI marked, complete all as specified and as directed. (Note : GI pipe for cable protection, sand cushioing GI pipe for cable protaction, sand cushioning shall be measured and paid respective items)

Replacement of LT XLPE cable in trenches of size 50Sqmm, 3 1/2 core 1100 volts grade armoured with aluminium conductor ISI marked, complete all as specified and as directed. (Note : GI pipe for cable protection, sand cushioing GI pipe for cable protaction, sand cushioning shall be measured and paid respective items)

Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides, complete all as specified and as directed.

Brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable, complete all as specified and as directed.

Sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable, complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removal of excavated material not exceeding 50m and depositing not exceeding 1.5m above starting point complete all as specified and as directed.

Replacement of Top plug 15 Amps including all connections, complete all as specified and as directed.

Replacement of CP connections armoured type 20 mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

Replacement of heating element 1.5 KW capacity round/triangular type for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser, complete all as specified and as directed. Make : Dasspass/Theeta/Venus/Bajaj. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Replacement of heating element 1.5 KW capacity round/triangular type for geyser of any type/Make and capacity including making necessary electric connections and testing the geyser, complete all as specified and as directed. Make : Dasspass/Theeta/Venus/Bajaj. Note : The petty items such as nut, bolt, clamps etc are deemed to be included in quoted rates.

Replacement of cable flexible 3 core 40 / 0.0076 copper in replacement, complete all as specified and as directed.

Taking down and provision of Soldering and brazing to inner copper tank 50/25/35 ltrs with brass solder and refixing, complete all as specified and as directed.

Replacement of base plate assembly of 6/9 holes suitable for fixing on a geyser tank 25/35/50 Ltr capacity including Nuts & rubber packing for water tight joint complete all as specified and as directed.

Replacement Stainless steel Geyser tank 25/35 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and as directed.

Replacement Stainless steel Geyser tank 50 Ltr capacity suitable for fixing in 6/9 nut assembly complete all as specified and as directed.

Replacement of chromium plated copper connection pipe 24" long with two brass adopters and connecting up, complete all as specified and as directed.

Replacement of CP non return valve in position internally screwed on one end and externally screwed on other ends, suitable for iron pipe of size 15mm dia, suitable for geyser of any type/Make and capacity, complete all as specified and as directed.

Replacement of safety valve/high pressure release valve (ISI Marked) with dead weight etc complete suitable for any makes/capacity/type of geysers installed at site, complete all as specified and as directed.

Replacement of thermostat ISI marked for geyser of any type/Make and capacity as per sample, including making necessary electric connections and testing the geyser, complete all as specified and as directed. Make : Dasspass/Theeta/Bajaj/Venus

Replacement plastic body capacitor of capacity 2.5 mfd with wire suitable for single phase motor and making connection, complete all as specified and as directed. Make : Surya/Usha/TIBCON/Havells

Rewinding of Ceiling fan 1200/1400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing, complete all as specified and as directed.

Rewinding of exhaust fan 300mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing, complete all as specified and as directed.

Rewinding of wall mounting fan 400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing, complete all as specified and as directed.

Replacement of bearing suitable for 1200/1400mm sweep ceiling fan/wall mounted fan of any type including oiling greasing for proper running and testing, complete all as specified and as directed.

Replacement of Bakelite sheet 3mm thick of any size duly wire cut for switches, sockets, regulator etc., as per site requirement, complete all as specified and as directed.

Replacement of MCCB, 415 volts, three pole of cap 100/125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections, complete all as specified and as directed. Make : C&S/Havells/Legrand/Siemens/L&T

Replacement of MCCB, 415 volts, three pole of cap 200 Amps, 36 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections, complete all as specified and as directed. Make : C&S/Havells/Legrand/Siemens/L&T

Replacement of plug top 3 pin 10/20 amp earth metal clad suitable for industrial type DB, complete all as specified and as directed. Make : Anchor/HPL/C&S/Standard.

Replacement of socket 3 pin 10/20 amp earth metal clad suitable for industrial type DB, complete all as specified and as directed. Make : Anchor/HPL/C&S/Standard.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

Replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections, ccomplete all as specified and as directed. Make : Havells/CG/Bajaj

Replacement of Ventilating fan 200 mm sweep plastic body type including self cosing louver and making all electric connections, complete all as specified and as directed. Make : Havells/CG/Bajaj

Replacement of high pressure booster pump with 8 ltr capacity pressure tank, coupled with electric motor of capacity 0.50 HP, 230 volts, single phase, 50 Hz incl Pressure Guage, Pressure switch & connecting accessories of GI i.e bend, nipple, socket, tee of requisite size etc incl cutting of existing pipe, complete all as specified and as directed. Make: Usha/CG/V Gard/Khaitan/CR/Leader.

Exhaust fan upto 300 mm sweep metallic body type and making all electric connections and depositing the old unusable item to MES store yard, complete all as specified and as directed. Make : Bajaj ( Freshie) or equivalent in Havells/CG

Replacement of Heat exchanger tube type with titanium tubes to transfer Heat, equivalent of 1/5th of the daily load per hour with 10 degree centigrade temperature difference in primary and secondary system, complete all as specified and as directed.

Replacement of Interconnecting piping of size 15 mm dia existing for the solar collector all as specified and directed.The piping shall be of GI medium grade & fitting as per BIS specification. The pipe shall be insulated with 50mm thick rock wool/mineral wool of 48 Kg/Cum density & have a Vapour barrier, chicken wire mesh and 24 gauge aluminium cladding. The cladding shall be suitable for out door applications, complete all as specified and as directed.

All as per description of Srl item No.-192 here-in-before but of size 20 mm dia.

All as per description of Srl item No.-192 here-in-before but of size 25 mm dia.

All as per description of Srl item No.-192 here-in-before but of size 40 mm dia.

Replacement of Differential temperature controller (DTC) with display the digital read out of temperature at the two sensor points, complete all as specified and as directed.

Replacement of Time totalizer as per existing, ccomplete all as specified and as directed.

Replacement of Auto/manual indicating lamps as per existing, complete all as specified and as directed.

Replacement of Start/stop switch for the pumps when it is running on manual mode as per existing, complete all as specified and as directed.

Replacement of Contactor 'NO" type as per existing, complete all as specified and as directed.

Replacement of Over load relay as per existing design condition at site, complete all as specified and as directed.

Replacement of flow meter sensor as per existing, complete all as specified and as directed.

Replacement of electrically operated control valve per existing, complete all as specified and as directed.

Replacement of stainer per existing, complete all as specified and as directed.

Replacement of insulation with minimum of 50mm thick of rock wool/mineral wool of 48 Kg/Cum density and covered with vapour barrier chicken wire mesh and GI sheet of 24 Gauge thickness, complete all as specified and as directed.

Replacement of Chicken wire mesh of size 12.5mm x 0.51mm (24 SWG) hexagonal construction for cage covering of all solar water heater toughned glass plate including fixing, supporting material and tightened with nut & bolts, complete all as specified and as directed.

Replacement of PC flanged suitable for solar water heater, complete all as specified and as directed.

Replacement of hose clamp suitable for solar water heater, complete all as specified and as directed.

Replacement of gaskets suitable for solar water heater, complete all as specified and as directed.

Replacement Nuts, bolts and washers suitable for solar water heater, complete all as specified and as directed.

Replacement of safety valve of size 20 mm dia suitable for solar water heater tank, complete all as specified and as directed.

Replacement of elbow of size 20 mm diasuitable for solar water heater, complete all as specified and as directed.

Replacement of reducer suitable for solar water heater, complete all as specified and as directed.

Replacement of nipple of size 20 mm dia 6" long suitable for solar water heater, complete all as specified and as directed.

Replacement of sockets of size 20 mm dia suitable for solar water heater, complete all as specified and as directed.

Replacement of tee of size 20 mm dia suitable for solar water heater, complete all as specified and as directed.

Replacement of glass of solar water heater as per existing size, all acomplete all as specified and as directed.

Replacement of solar water heater elements of 6 KW capacity as per existing size, complete all as specified and as directed.

Hire charges for providing, fixing in position of 1100 volt grade heavy duty cable PVC insulated aluminium conductor 4Sqmm stranded served with sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire two single core cables flat or circular complete laid on ground/fixed on steel pipes/wooden bullies/poles along with continuous copper conductor earth wire of suitable size PVC insulated/protection pipe where required, complete all as directed by Engr-in-charge. (300 RM x 90 days)

Hire charges for providing, fixing in position of 1100 volt grade heavy duty cable PVC insulated aluminium conductor 2.5Sqmm stranded served with sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire two single core cables flat or circular complete laid on ground/fixed on steel pipes/wooden bullies/poles along with continuous copper conductor earth wire of suitable size PVC insulated/protection pipe where required, complete all as directed by Engr-in-charge. (300 RM x 90 days)

Hire charges for providing and fixing in position light point, bell point/light socket point wiring with PVC insulated aluminum conductor cable 2.5 Sqmm including same size of copper conductor cable as earth wire partly in conduit laid in tents/shamianas wherever required including switches, sockets, lamps holders and bells complete fixed on proper boards, complete all as specified and as directed. (60 points x 90 days). (Note:- All cables and accessories shall be fire retardant low smoke).

Hire charges for providing and fixing in position power point, wiring with PVC insulated aluminum conductor cable 4 Sqmm including 2.5Sqmm size of copper conductor cable as earth wire partly in conduit laid in tents/shamianas etc wherever required including complete fixed on proper boards, complete all as specified and as directed. (30 points x 90 days) (Note:- All cables and accessories shall be fire retardant low smoke).

Hire charges for and including providing fixing and connecting properly the follwing safety devices complete all as specified and as directed. 30 NosX90 days. (a) MCB DBs 4 way SPN -1No. (b) MCB SPN 20 Amps-1 No (c) MCB SP 6 to 32 Amps -2 Nos.

Hire charges for providing, fixing in position including testing Metal halide/flood light fitting including all accessories like lamp holder with lamp 500/1000 watt connected complete with suitable size of cable for exisiting poles/ballies including suitabe pipes brackets and clamps where required, complete all as specified and as directed. (45 Nos x 2 days)

Hire charges for providing, fixing in position of 1100 volt grade heavy duty cable PVC insulated aluminium conductor 6Sqmm stranded served with sheathing of PVC tape and overall PVC sheathed two single core cables flat or circular complete laid on ground/fixed on steel pipes/wooden ballies/poles along with continuous copper conductor earth wire of suitable size PVC insulated/protection pipe where required, complete all as specified and as directed. (1200 RM x 3 days)

Hire charges for providing, fixing in position of 1100 volt grade heavy duty cable PVC insulated aluminium conductor 4Sqmm stranded served with sheathing of PVC tape and overall PVC sheathed two single core cables flat or circular complete laid on ground/fixed on steel pipes/wooden ballies/poles along with continuous copper conductor earth wire of suitable size PVC insulated/protection pipe where required, complete all as specified and as directed. (1200 RM x 3 days)

Hire charges for providing, fixing in position extention board comprising of the following items complete including connected with suitable size of cable of approximate length 3 mtrs where required, complete all as specified and as directed. (45 Nos x 2 days) :- a) Socket outlet 5 amps with switches - 2 Nos b) Socket outlet 16 amps with switches - 1 Nos

Maintenance and safe custody of temporary electrification, detecting faults if any and making electric supply functional round the clock by providing the following for APG camp, complete all as specified and as directed. : Electrician - 03 Nos ( One in each shift of 8 hrs round the clock) b) Helper - 03 Nos ( One in each shift of 8 hrs round the clock)

NOTE:- For minimum fair wages, EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

sunil traders

VIKRANT CONSTRUCTION CO.