COMPREHENSIVE MAINT OF OTM ACCN OF MH GOLCONDA COMPLEX UNDER GE GOLCONDA

Amount

S & F in repair for Mild steel barrel tower bolts 150 mm long, stove enamelled black, with bright bolt etc complete all as specified and directed.

S & F in repair for Mild steel barrel tower bolts 100 mm long, stove enamelled black, with bright bolt etc ccomplete all as specified and directed.

S & F in repair 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed.

S & F in repair 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in repair Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as specified.

S & F in repair 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S & F in repair 100 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as spfd.

S & F in repair for Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt in 300 mm etc complete all as specified and directed.

S & F in repair for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and directed.

S & F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F in repair Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and directed.

S&F in repairs Butt hinges medium weight cold rolled mild steel and fixed in 100 mm complete all as specified and directed.

S & F in repair MS Butt hinges medium weight cold rolled of size 75mm complete all as specified and directed.

S & F in repairs mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate c ( short type, fighter jet aeroplane shape type), complete all as specified and directed.

S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed, complete all as specified and directed.

Taking out the rolling shutters of any size, incl top cover guide channel etc carrying out repairs and re-fixing the same with applying grease etc (New material provided except safety lever locks, ball bearings, gears lath and top cover shall be measeured and paid separately ) complete all as specified and directed.

S&F in repairs Lath 1.25 mm thick & 75 mm wide for rolling shutter, complete all as specified and directed.

S&F in repairs suitable spring for rolling shutter, complete all as specified and directed.

S&F in repairs Guide rail of any size of rolling shutter, complete all as specified and directed.

S&F in repairs Ball bearing of any size for rolling shutter, complete all as specified and directed.

S&F in repairs top cover for rolling shutter, complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete all as specified and directed complete.

S & F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete all as specified and directed complete.

M&L for welding in repairs hinges , handle , lock , tower bolt , sliding bolt ,rat rail , peg stay ,peg set , exc 6mm and not exc 9 mm in thickness. by welding etc complete all as directed

Taking down old iron glazed shutter complete from frame and refixed the same after necessary repair/welding/rebeting/ fixing wire mesh/glass(wire mesh/glass measured separetaly), area of shutter n exc 1 sqm each, complete all as specified and directed.

Taking down old aluminium shutter complete from frame and refixed the same after necessary repair, (prelaminated particle board/glass/lock/handle measured separetaly)area of shutter exc 1 sqm but not exc 2 sqm each complete all as specified.

S&F 5.5 mm thick glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and directed.

M&L 12 mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified and directed.

S&F in repair Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified and directed.

S&F in repairs double action floor spring hudraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty, complete all as specified and directed.

S&F in repairs Aluminium extruded section Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capcity of tank exc 250 & n exc 500 ltrs, complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capcity of tank exc 500 & n exc 1000 ltrs, complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic,or Indian) over PVC/RCC water tank (each letter per cm of width and 6 cm of hight) complete all as specified and directed.

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms), Bore dia of pipe in 20 mm, etc complete all as specifed and directed.

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms), Bore dia of pipe in 15 mm, etc complete all as specifed and directed.

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms), Bore dia of pipe in 25 mm, etc complete all as specifed and directed.

S&F in repair PVC water tank lid/cover of size 250 ltr upto 500 ltr capacity tank complete all as specified and directed

S&F in repair PVC water tank lid/cover of size above 500 ltr upto 1000 ltr capacity tank complete all as specified and directed

S & F PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed in repairs.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in reapir PVC waste pipe 900 mm long with complete fitting etc 32 mm dia, complete all as specified and directed.

S & F in repair PVC Urinal pipe 900 mm long with complete fitting etc 32 mm dia, complete all as specified and directed.

S&F in repair PVC float set complete of internal flushng system fitting in side for low levelling PVC cistern Complete all as specified & directed.

S&F in repair of good quality PVC syphon kit for low level flushing cistern 0f 10ltrs capacity complete all as directed.

S&F in repair of flush pipe of polythene of low or high density or PVC 32mm for low level Cistern to pedestal pan,including joints Complete all as specified.

S&F in repair of flush pipe of polythene of low or high density or PVC 32mm for low level Cistern to squatting pan,including joints and making good the floor Complete all as specified..

S&F in repair of good quality rubber washers for low level flushing cistern complete all as directed.

Repair lekage of 15 mm bore CP bib tap / pillar tap/ stop cock by replacing of necessary CP brass cup and brass spindle of requred size complete all as specified and directed.

Repair lekage of 15 mm bore CP bib tap / pillar tap/ stop cock by replacing of necessary 15 / 20 mm PVC washer of requred size complete all as specified and directed.

Supply and fixing in repair 15 mm wall mixer,wall mounted with bend and over head shower complete all as specified and directed.

M&L 75 mm PVC Nahani/ floor trap plain with grating including jointing with solvent cement including removal of existing nahani/ floor trap complete all as specified and directed.

S & F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls, bore of pipe in 110 mm, etc complete all as specifed and directed.

S & F in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls, bore of pipe in 75 mm, etc complete all as specifed and directed.

S & F in repair PVC (SWR) bends any radius 110 mm dia, complete all as specified and directed.

S & F in repair PVC (SWR) bends any radius 75 mm dia, complete all as specified and directed.

S & F in repair PVC (SWR) branch piece, single (single Y) equal or unequal any radious, 110 mm dia, complete all as specified and directed.

S & F in repair PVC (SWR) junction single, (Single T) equal or unequal any radious, 110 mm dia, complete all as specified and directed.

S & F in repair PVC (SWR) vent cowl 110 mm dia, complete all as specified and directed.

Taking up or down, 15 mm dia GI steel tubing & connections, including cleaning for refixing complete all as specified and directed

All as per item No 60 but 20mm bore, complete all as specified and directed.

S&F in repair for 15mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor. complete all as specified and directed

S&F in repair for 20mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor. complete all as specified and directed

S&F in repair 32 mm Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm- 45gms/40mm-60 gms), complete all as specified and directed.

S&F 100 mm stainless steel Waste coupling (half or full threaded) complete all as specified and directed.

M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and directed.

S & F in repair Vitreous China wash down water closet pan(pedestal pattern) white ( including 'P' or 'S' trap connection to drain)or out going pipe and to flushing pipe anti shyfonic pipe etc completely fixed.

S & F in repair Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including 'P' or 'S' trap complete including provision of cement concrete.

S & F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe.

Supply and fixed in repairs Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete as directed

S&F in repair 15 mm bore two way Bib taps fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule Branded Make complete all as specified and directed.

Supply and fixed in repair 15 mm bore Bib taps, cast copper alloy fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule , complete all as specified and directed.

S & F in repair 15 mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs 15 mm dia Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed

S & F in repair plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminized hinging device,complete all as specified and directed.

Supply and fix in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe , complete all as specified and directed.

S&F in repairs 15 mm dia Brass chromium plated shower rose 125 mm size fixed, complete all as specified and directed.

M&L for opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings for smooth flow of water from BIB TAPS/shower/WHB pillar tap/Stop valves by application of electrically operated suction pump complete all as specified and directed.

S & F in repair second class hard wood plain fillets size square in section , clean sawn secured with nails exc 13 but n exc 25 sqcm cm including one coat primer and two coat synthetic enamel paint complete all as specified and directed.

M & L second class hard wood plain fillets, square, rectangular or trianglular in section, clean sawn, secured with nails or brads sectional area exc 3 sqcm & n exc 6 sqcm fixed as in repair, complete all as specified and directed.

S&F in repair 500 liters Rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F in repair 1000 liters Rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed.

M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as directed.

S & F Window guard bars, plain, let in and fixed independently in wodden frames, L or T section section supports for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165 including making hole on wooden frame to insert guard bars complete all as specified and directed.

M&L 2nd class hard wood plain framed panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm thick particle board with commercial face veneers on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated, omplete all as specified and directed.

S & F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutter of divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventila-tors, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as specified and directed.

S & F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all as double layer, complete all as specified and directed.

S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.

S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type), complete all as specified and directed.

S & F MS Butt hinges medium weight cold rolled of size 75mm complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed, complete all as specified and directed.

M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

M & L for 18 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work for cub board,kitchen cub board and selves and other uses etc complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer instruction, complete all as specified and directed.

S & F factory made solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and directed.

S & F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21, complete all as specified and directed.

S & F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F 100 mm length of aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as spfd and directed.

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised

S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 100 mm,etc complete all as spfd and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.

S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as spfd and directed.

S &F in repair of MS 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified

S &F in repair MS fancy powder coated brackets for 25 mm dia drapery curtain rods, complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete.

S & F 3mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed.

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, etc complete, as specified and directed.

S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,three track etc complete, as specified and directed.

S&F 5.5 mm thick glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and directed.

M&L 12 mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified

S&F aluminium Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified complete all as specified and directed.

S&F 150 mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Demolition of brick work or stone masonary, built in cement mortar, complete all as specified and directed.

M&L brick work with old size fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified & directed..

M & L half Brick wall with old size fly ash bricks straight or curved on plan to any radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water completely, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 with WPC on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement. (NOTE : - WPC will be measured and paid separately), complete all as specified and directed.

M&L 5 mm thick rendering in CM 1:3 on surface of ceilings finished even and smooth w/o using extra cement , complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls complete all as specified and directed.

Preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Preparing newly plastered surfaces and applying two coats of OBD over a coat of primer on walls complete and all as specified.

Dismantling Asbestos cement sheet (Corrugated/Semi-corrugated etc.) in roof covering , complete all as specified and directed.

M&L for 6 mm thick Non Asbestos cement fiber corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers complete all as specified and directed.

Fixing only 6 mm thick Asbestos cement corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers complete all as specified and directed.

S & F 6 mm thick Non Asbestos cement fiber two pieces adjustable serrated ridge fixed with J or L hook or cranked bolt with washers, complete all as specified and directed.

Dismantling plain or corrugated steel/alluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc completed all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

S&F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

S&F Rolled mild structural steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde-E) all as specified and directed.

S&F for MS Framed work as in Flat iron supports to hold the valley gutters of rain water etc. with ends shouldered and/or riveted and similar work conforming to Fe.290.Gde-E-165 including taking down complete, complete all as specified and directed.

Dismantling single layer mangalore pattern or similar tiles laid dry in roofing, complete all as specified and directed.

M & L roof tiles mangalore pattern interlocking at side joints laid dry complete all as specified and directed.

Fixing only roof tiles mangalore pattern interlocaking side joints laid dry, complete all as specified and directed.

M & L for Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6, etc completed all as specified.

Dismantling timber scantlings 40 Sq cm and over in section in any position in framed work, complete all as specified and directed.

M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and directed

Disconnecting existing tanks of capacity exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed.

Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed.

Demolition of cement concrete on roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work etc complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth using extra cement with WPC complete all as specifed and directed. (NOTE : Supply of WPC will be paid under the respective Item)

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using WPC @ 3% by weight of cement complete incl taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbinbg down with water to receive new treatment all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item), complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including taking down existing roof treatment on parapet walls, preparing the surface by cleaning with wire brushing, scrubbinbg down with water to receive new treatment complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

Cutting out V-groovesin plaster / masonary and inserting the waterproofing membrane and making good in CM 1:3 complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/slabs/blankets any thickness, incl cover filltets and grids and S & F in true horizontal level false ceiling system, The snap grid shall be of hot dipped galavnised steel sections exposed suface with precoated capping, main tee of size 24x32mm at every 1200mm c/c and cross tee of size 24x27mm (1200mm & 600mm long) at every 600mm c/c and wall angle of size 19x19mm fixed to perimetere wall, as per manufacturer's instructions, grid to be suspended at every 1200mm c/c in both directions by using 3mm dia pre-straightened GI wire at every 1200mm interval at the main tee supported from existing RCC slab fixed with Metal dash fastener including provision of 4mm thick white colour textured designer cement ceiling board (V board) of size 595 x 595 mm fixed with screws/clips complete all as per manufactureres instructions and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L Weather boarding of 2nd class H.W of 20mm to 25mm thick and rebated of thick edge to give 20mm lap and fixed with screws/nails including one coat primer and two coat synthetic enamel paint complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or untreated wooden surfaces exc 10 cm in width or girth including preparation complete all as specified and directed.

Dismantling Battens for tiles exc 15 cm, shingles etc, of any size including tilting fillets complete all as specified and directed.

M&L for 2nd class hard wood Clean sawn batten for tiles sectional area exc 15 & n. exc 25 Sqcm at 30 cm C / C complete all as specified and directed.

M&L for Tiles or slate battens , any size and spacing, prepared (Old / New) and treated all over (measured overall on one side only, spaces not deducted) with two coat of creosote complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.06 sqm but n'exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed.

M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n'exc 0.18 sqm in floors etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed.

M&L Vitrified light shade ceramic tiles 10 mm thick (square/ rectanglar ) polished, area of each tile not exceding 0.36 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 350X275X7mm thick set and and jointed in cement slurry and pointed with white or coloured cement to match , laid over and including 10mm thick rendering in cement mortar(1:4) as backing coat, complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors,approns laid , bedded and pointed any mortar etc .

M&L Mirror Polished shahabad stone flooring with slab of thickness 20-25 mm,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 20mm thick screed bed in CM 1:6 including grinding and polishing making smooth surface of floor complete all as specified and as directed.

M&L Polished shahabad stone slabs on skirting/dado of thickness 20-25 mm set & jointed in meat cement slurry and pointed in white or coloured cement to match the shade over 10 mm thick backing coat in CM 1:3, including grinding and polishing making smooth surface of floor complete all as specified.

M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over 20 mm thick screed bed in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all spfd and directed.

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition).

M&L for Reinforced cement concteteType B1, 1:2:4 (20 mm graded stone aggregate) in slabs supported on walls, beams, landings, balconies, canopies, deck slabs and, shelves and similar works etc, complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inlcuding cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work as flat finishing to rough finished surface of concrete complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), cement concrete ( un reinforced), etc complete all as spd and directed.

M&L for 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in sub base complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement, complete all as specified and directed.

SAI RAM CONSTRUCTIONS (BID ID -3360937)

M/S K Rama Rao (BID ID -3370907)

BUILDWEL (BID ID -3376933)

NAYANA CONSTRUCTIONS (BID ID -3377656)