Construction of 200 bedded Sports hostel with surrounding development works at Sambalpur

SL NO. DESCRIPTION AMOUNT

A HOSTEL BUILDING

1.01 Civil & Finishes Works ₹ 14,58,81,865.95

1.02 Furniture Works ₹ 2,37,07,236.50

B EXTERNAL DEVELOPMENT WORK

1.04 Storm Water Drain ₹ 19,03,627.75

1.05 Septic Tank Works ₹ 18,43,758.39

1.06 Landscaping Works ₹ 3,78,116.89

1.07 Underground Water Tank ₹ 36,47,478.65

1.08 BASKETBALL AND BADMINTON COURT ₹ 57,63,498.29

2 Plumbing Works ₹ 1,22,42,110.59

3 Electrical Works ₹ 2,73,26,313.55

4 Lift Works ₹ 33,68,451.44

5 Fire Fighting Works ₹ 29,12,140.00

6 HVAC Works ₹ 11,47,920.00

D TOTAL AMOUNT ₹ 23,55,50,346.60

D TOTAL AMOUNT ₹ 23,55,50,346.60

Digitally signed by JAYA

Construction of 200 bedded Sports hostel with surrounding development works at Sambalpur

Sl No Remarks Items Description Unit Quantity Rate Rs. (incl. GST) Total Amount (Rs.)

Sl No Remarks Items Description Unit Quantity Rate Rs. (incl. GST) Total Amount (Rs.)

A HOSTEL BUILDING

A1 CIVIL & FINISHES WORK

1 199.6 Earth work in excavation of foundation in hard soil or gravelly soil including dressing of sides CUM 931.00

and leveling the bed upto the required depth and depositing the excavated materials away from

the work site with intial leads and lifts, including shoring, shuttering & dewatering (if required)

with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for

the work complete in all respect excluding GST as directed by the Engineer- in- charge.

2 213.49 Extra lift of 1.5m or part there of over the initial lift of 1.5m in hard soil or gravelly soil CUM 302.00

3 Excavation Work 3mt to 4.5mt CUM 155.00 ₹ 383.31 ₹ 59,412.28

4 102.6 Filling in foundation and plinth with excavated materials including watering and ramming as Cum 1051.00

directed by the Engineering-in -Charge.

5 173.8 Disposal of surplus excavated materials within the area specified & directed by Development Cum 334.00

Authority (all kinds of soil, boulders, concrete or any other excavated materials) including all lifts,

spreading in layers, breaking clods and leveling to disposal ground arranged by the contractor

inclusive from the site of excavation to the site of disposition(upto take 10 Km.) etc. complete in

all respect excluding GST as directed by the Engineer- in- charge.

6 410 Supplying & Filling foundation trenches, plinth & ditches with river sand well watered and CUM 241.00

rammed in layers not exceeding 23 c.m in depth with all lead and lift including cost,

conveyance, loading, unloading, stacking,royalties of all Materials, cost of all Labour,Sundries,

T&P required for the work etc complete in all respect excluding GST as directed by the Engineer-

in-charge. (Measurement will be taken on finished compacted section only.)

7 174.34 Supplying chemical emulsion in sealed container including delivery as specified. Chlorpyriphus / Ltrs 1261.00

Lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for Post constructional antitermite treatment

(excluding the cost of chemical emulsion).

8 15.90 With Chlorpyriphus / Lindane emulsifiable concentrate of 20% with 1% concentration. Rmt 156.00

9 21.10 Along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 liter Rmt 156.00

per lenear meter including drilling and plugging holes etc.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm

apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement :

2 Coarse sand) to match the existing floor:

10 122.51 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 1206.00 ₹ 198.24 ₹ 2,39,076.23

11 4566.5 Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and cum 22.00

floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved

quality and from approved quarry including hoisting, lowering and laying concrete in layers not

exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete

including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, ₹ 7,104.66 ₹ 1,56,302.56

Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required)

including hire and running charges of water pump required for the work etc complete in all

respect excluding GST as directed by the Engineer-in-charge.

12 4229.9 Providing & laying Plain Cement concrete (PCC ) of proportion (1:4:8) in foundation and cum 154.00

floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved

quality and from approved quarry including hoisting, lowering and laying concrete in layers not

exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete

including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, ₹ 6,681.28 ₹ 10,28,916.81

Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required)

including hire and running charges of water pump required for the work etc complete in all

respect excluding GST as directed by the Engineer-in-charge

Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of

Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies,

Staircase, Column, Beam Parapets, Window sills, Lofts, Railings etc. ) as per approved designs

and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes

at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using

screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher

broken granite stone chips of approved quality from approved quarry, washed and cleaned to be

mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying

and compacting concrete by using vibrators, watering and curing for 28 days, including cost of

required steel centering and shuttering there after dismantling and removing the debrises

away from the work site and finishing the exposed surface smooth providing grooves or beads

wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all

materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in

all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires

and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding

wires and tying the grills and placing in proper position excluding GST as directed by the

Engineer-in-charge.

Digitally signed by JAYA

Terrace Floor Includes Mumty

Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of

approved make for RCC work of required diameter & of approved quality including

straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting,

lowering and placing in position as per the approved design & drawings with provision for fan

hooks where required including the cost, conveyance of reinforcement bars or tor steel and

binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc.

required for the work complete for the work in all heights as per the specification & excluding

GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be

calculated on standard weight. Weight of binding wire will not be considered for measurement.

No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and

wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)

57 Fourth Floor Includes Mumty Qntl 535.05 ₹ 12,293.95 ₹ 65,77,902.65

Fly Ash. brick masonry of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than

75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened &

washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use ,including

splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering

and curing etc. including cost, coveyance,stacking, loading, unloading, royalties of all materials

,cost of all labour,scaffolding, sundries and T&P required for the works complete in all respect

excluding GST as directed by the Engineer-in-charge.

62 Fourth Floor Includes Mumty Cum 5.00 ₹ 7,977.86 ₹ 39,889.31

Aerated Autoclaved Fly ash (AAC) bricks/ masonary in filler/ inside walls using A.A.C blocks of

size 625mm x 200mm x200mm having compressive strength not less than 4 N/mm2

confirmijng to IS:2185(PART-3)-2005 and IS:6441-1972 in cement mortor of mix (1:6) and

screened and washed sand for mortar for use in superstructure including splays, cutting, circular

moulding, corblling, chamfering and simillar such type of works, watering and curing etc.

including cost, conveyance, royalti, loading, unloading and taxes of all materials, cost of all

labour, scaffolding, sundries T & P required for the works etc. complete in all respect as directed

by the engineer in charge.

67 Fourth Floor Includes Mumty Cum 283.00 ₹ 10,525.72 ₹ 29,78,778.19

Aerated Autoclaved Fly ash (AAC) bricks/ masonary in filler/ inside walls using A.A.C blocks of

size 625mm x 200mm x100/125mm having compressive strength not less than 4 N/mm2

confirmijng to IS:2185(PART-3)-2005 and IS:6441-1972 in cement mortor of mix (1:6) and

screened and washed sand for mortar for use in superstructure including splays, cutting, circular

moulding, corblling, chamfering and simillar such type of works, watering and curing etc.

including cost, conveyance, royalti, loading, unloading and taxes of all materials, cost of all

labour, scaffolding, sundries T & P required for the works etc. complete in all respect as directed

by the engineer in charge.

68 Upto Ground Floor Cum 12.00 ₹ 9,923.21 ₹ 1,19,078.52

72 Fourth Floor Includes Mumty Cum 35.00 ₹ 10,525.72 ₹ 3,68,400.13

PLASTERING AND FINISHING WORK

12 m.m thick cement plaster in cement mortar of mix (1:6) in all floors at all height using

screened & washed sharp river sand for mortar with approved quality of cement, finished

smooth to the even surface of the brick masonry walls after racking out the joints properly

,providing grooves wherever necessary including cost, conveyance, loading, unloading,stacking,

royalties of all Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering,

Curing,Rounding of corners etc. required for the work complete in all respect excluding GST as

directed by the Engineer- in- charge.

77 Fourth Floor Includes Mumty Sqmt 2705.00 ₹ 296.89 ₹ 8,03,082.04

Digitally signed by JAYA

20mm thick C.P. in C.M.(1:6) over brick masonary in all floors at all height using screened &

washed sharp river sand for mortar with approved quality of cement, finished smooth to the even

surface of the brick masonry walls after racking out the joints properly ,providing grooves

wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all

Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of corners

etc. required for the work complete in all respect excluding GST as directed by the Engineer- in-

82 Fourth Floor Includes Mumty Sqmt 1856.00 ₹ 416.30 ₹ 7,72,660.22

6 m.m thick cement plaster in cement mortar of mix (1:4) in all floors at all height using

screened & washed sharp river sand for mortar with approved quality of cement to the ceiling

of the Roof Slab, Staircase, Beams, Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and

Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry

treatment and finished smooth to all R.C.C. Surface including cost, conveyance, loading,

unloading, royalties ,stacking of all Materials, cost of all Labour,Sundries, T&P,

Scaffolding,Watering, Curing etc. complete in all respect excluding GST as directed by the

Engineer- in- charge.

87 Fourth Floor Includes Mumty sqm 866.00 ₹ 296.42 ₹ 2,56,696.26

Finishing wall surface of walls with cement based wall putty ( water based) of approved make

and finishing the surface smooth by sand papering to receive paint in all floor & at all heights

including cost, coveyance, loading , unloading ,stacking of all Materials, cost of all

Labour,Sundries, Staging,Scaffolding, T&P required for the work etc. complete in all respect

excluding GST as directed by Engineer-in-charge.

92 Fourth Floor Includes Mumty Sqmt 3418.00 ₹ 140.54 ₹ 4,80,358.88

Priming 1 coat with wall primer water bond cement primer including cost, coveyance, loading ,

unloading ,stacking of all Materials, cost of all Labour,Sundries, Staging,Scaffolding, T&P

required for the work etc. complete in all respect excluding GST as directed by Engineer-in-

97 Fourth Floor Includes Mumty Sqmt 3418.00 ₹ 108.68 ₹ 3,71,461.40

98 495.00 Providing and applying 2mm thick Texture Plaster Terre Palette (Earthen Textures, Spectrum, Sqmt 110.00

Coral or equivalent) incorporating fine filaments made of polymer and aggregating natural stone

powder with making grooves on existing base coat of 20 mm thick smooth mala plaster etc. ₹ 584.10 ₹ 64,251.00

Complete Colour and shade as approved by Architect/ Engineer in charge for all floor all height."

Wall/ Ceiling painting 2 coats with Plastic emulsion paint of approved shade on new work to

give an even shade ,including cost, coveyance, loading , unloading ,stacking of all Materials,

cost of all Labour,Sundries, Staging,Scaffolding, T&P required for the work etc. complete in all

respect excluding GST as per specification as directed by Engineer-in-charge.

103 Fourth Floor Includes Mumty Sqmt 3418.00 ₹ 131.69 ₹ 4,50,109.58

Finishing walls with textured exterior paint of required shade : New work (Two or more coats

applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @

2.20kg/10 sqm including watering ,curing,cost,conveyance of all material cost of all

labour,brushes ,T& P etc and necessary scaffolding work complete in all respect excluding GST

as per specification as directed by Engineer-in-charge.

108 Fourth Floor Includes Mumty Sqmt 29.00 ₹ 280.13 ₹ 8,123.83

Finishing to the exposed surfaces of wall with weather coat of any approved shade on new

work 2 coats to give an even shade including watering ,curing,cost,conveyance of all material

cost of all labour,brushes ,T& P etc and necessary scaffolding work complete in all respect

excluding GST as per specification as directed by Engineer-in-charge.

113 Fourth Floor Includes Mumty Sqmt 1856.00 ₹ 96.17 ₹ 1,78,491.52

114 30.50 Labour charges for providing groove in external plaster having width and spaced as directed by Rmt 705.00

engineer incharge etc. complete.

Applying priming coat :

115 28.52 With ready mixed red oxide zinc chromate primer of approved brand and manufacture sqm 1000.00

on steel galvanised iron/steel works

116 15.73 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on sqm 1000.00

steel work (second coat)

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per

manufacturer's specifications including appropriate priming coat, preparation of surface, etc.

Digitally signed by JAYA

Providing, Fitting and Fixing minimum 8 m.m to 10m.m thick Vitrified Tile of approved make

conforming to IS : 13755 in flooring using Vitrified Tile of approved quality, colour and size

(600 m.m x 600 m.m) coloured printed series homogeneous) in floors, treads on steps and

landings in all floors at all height on 20m.m thick bed of cement mortar of mix (1:4) laid in

proper slope and gradient with screened & washed sharp river sand for mortar and grouted

with neat white cement slurry joining the Vitrified Tile with neat white cement slurry mixed with

required quantities of pigments of approved marks to match the shades of the Vitrified Tile if

required (Tiles are to be immersed in the water for required time before use) including cost,

conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries,

T&P required for the work ,Watering,Curing for required days including cleaning the flooring

space manually etc. complete in all respect excluding GST as directed by the Engineer-in-charge.

Note - Sample of tiles shall be approved before procurement and use.) Scratch Resistant Vitrified

tiles of Size not less than 600mmX600mm with joint finished with matching Grout.

122 Fourth Floor Includes Mumty Sqmt 453.00 ₹ 1,316.17 ₹ 5,96,225.92

Providing Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of

approved quality, ccolour and size in floors, treads on steps and landings in all floors at all height

on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with

screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing

the tile with neat white cement slurry mixed with required quantities of pigments of approved

marks to match the shades of the granite tile if required watering and curing , including cost,

conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P

required for the work including rubbing mechanically and wax polishing etc. complete in all

respect excluding GST as directed by Engineer-in-charge.

127 Fourth Floor Includes Mumty Sqmt 70.00 ₹ 3,688.33 ₹ 2,58,182.82

Providing and Fixing granite (Above 0.40 Sqm) (20mm thick) dados,skirting and risers of steps

on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to

match the shade of the tiles including rubbing and polishing complete including cost of material,

labour, T&P etc. complete in all respect excluding GST and as directed by Engineer-in-charge

132 Fourth Floor Includes Mumty Sqmt 28.00 ₹ 3,837.83 ₹ 1,07,459.30

Providing and Fixing Vitrified antiskid Floor tiles (600x600mm) of premium grade having

thickness 7 mm to 8mm confirming to IS 13755) in all floors at all height on 20m.m thick bed of

cement mortar of mix (1:4) laid in proper slope and gradient with screened & washed sharp

river sand for mortar and grouted with neat white cement slurry joining the Tile with neat

white cement slurry mixed with required quantities of pigments of approved marks to match the

shades of the Vitrified Tile if required (Tiles are to be immersed in the water for required time

before use) including cost, conveyance, loading, unloading, stacking, royalties of all Materials,

cost of all Labour, Sundries, T&P required for the work ,Watering,Curing for required days

including cleaning the flooring space manually etc. complete in all respect excluding GST as

directed by the Engineer-in-charge. Note - Sample of tiles shall be approved before procurement

and use.) 600 x 600 mm antiskid full body vitirfiedtiles, to be fixed with spacers of 6mm width

and grouted with epoxy of approved shade

137 Fourth Floor Includes Mumty Sqmt 124.00 ₹ 704.70 ₹ 87,382.30

Fixing Vitrified tiles (size 600x300mm) in dados,skirting and risers of steps on 12mm thick

cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of

the tiles including cost, conveyance, loading, unloading, stacking,royalties of all materials, cost of

all labour, T & P, sundries, watering & curing etc. required for the work complete in all respect

excluding GST as directed by the Engineer-in-Charge. Note - Sample of tiles shall be approved

before procurement and use.)

142 Fourth Floor Includes Mumty Sqmt 325.00 ₹ 1,064.48 ₹ 3,45,955.35

Providing, Fitting & Fixing 16 mm thik kota stone of approved quality and make confirming

to IS specifications having minimum breaking strength 1400 kg/sq.cm in dados and skirting in

all floors at all heights on 12mm thick bed of cement mortar (1:3) to proper slope, line and level

including cutting to required size and shape, fixing at corners and splays etc. including filling the

joints with silicon sealant to match the shade as per the design & drawing including cost,

conveyance, loading, unloading, stacking, royalties of all materials, cost of all labour, T&P,

sundries, watering & curing etc. required for the work complete in all respect excluding GST as

directed by the Engineer-in-Charge.

147 Fourth Floor Includes Mumty Sqmt 81.00 ₹ 1,778.73 ₹ 1,44,077.29

Providing, Fitting & Fixing 16 mm thik kota stone of approved quality and make confirming

to IS specifications having minimum breaking strength 1400 kg/sq.cm in dados and skirting in

all floors at all heights on 12mm thick bed of cement mortar (1:3) to proper slope, line and level

including cutting to required size and shape, fixing at corners and splays etc. including filling the

joints with silicon sealant to match the shade as per the design & drawing including cost,

conveyance, loading, unloading, stacking, royalties of all materials, cost of all labour, T&P,

sundries, watering & curing etc. required for the work complete in all respect excluding GST as

directed by the Engineer-in-Charge.

Digitally signed by JAYA

152 Fourth Floor Includes Mumty Sqmt 7.00 ₹ 1,506.74 ₹ 10,547.19

153 Fitness area Supply of 4.5 mm thick synthetic sports surface it consist of 100% pure vinyl wear layer of 1.5 Sqm 128.00

mm thickness, upper surface treated with protecsol to reduce Skin burn and sanosol treatment

to avoid fungal growth. Double fiber glass grid for sound stability on floor. Width of sheet is

1.5mts, joined with seamless hot welding. Laid with adhesive as per manufacturer’s instruction

over existing leveled surface including game lines marking with following specification.

154 High-density polystyrene foam skirting is a 100% recyclable, eco-friendly solution for renovation Rmt 44.00

projects. Coated with a protective varnish, it is designed to be placed over existing skirting,

reducing handling and installation costs while providing a sleek, elegant finish. Dimensions: 2000 ₹ 3,416.99 ₹ 1,50,347.34

mm (L) x 22 mm (W) x 110 mm (H)Unit Weight: 660 g

155 52 mm thick cement concrete flooring with concrete /VDF hardener topping, under layer 40 Sqm 128.00

mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound

mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of ₹ 614.19 ₹ 78,616.32

cement slurry, vacuum dewatering process and finally finished by floating, brooming with wire

brushetc. complete as per specifications and directions of Engineer-incharge.but excluding the

cost of nosing of steps etc. complete in all respect excluding GST as directed by the Engineer- in-

156 Urinal Partition Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 Sqmt 9.00

cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with

chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished

smooth complete in all respect excluding GST as directed by the Engineer- in- charge

Counters Providing and fixing 20 mm thick gang saw cut, mirror polished, remoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, door frame,facias

and similar locations of required size, approved shade, colour and texture laid over 20 mm thick

base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white ement, mixed with

matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges

to give high gloss finish etc. complete in all respect excluding GST as directed by Engineer-in-

161 Fourth Floor Includes Mumty Sqmt 24.00 ₹ 3,413.15 ₹ 81,915.60

162 Extra for providing opening of required size & shape for wash basins / kitchen sink in kitchen Nos 55.00

platform, vanity counters and similar location in marble / stone work including necessary holes

for pillar taps etc. including rubbing and polishing of cut edges etc. complete in all respect ₹ 461.89 ₹ 25,403.79

excluding GST and as directed by Engineer-in-charge

Providing and Fixing granite (Above 0.40 Sqm) (20mm thick) dados,skirting and risers of steps

on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to

match the shade of the tiles including rubbing and polishing complete including cost of material,

labour, T&P etc. complete in all respect excluding GST and as directed by Engineer-in-charge

167 Fourth Floor Includes Mumty Sqmt 46.00 ₹ 3,837.83 ₹ 1,76,540.27

Providing and Fixing Granite in floors treads or steps and on 20mm thick bed of cement

mortar 1:4 (1cement : 4 sand) jointed with neat cement slury mixed with pigment to match the

shades of the tiles including cost, carriage, royalty & taxes of all materials, cost of all labours

T&P etc complete. 20MM GRANITE FINISH & COLOR AS PER ARCH SPECS. IN COMBINATIONS (

HONNED/ LEATHER/ POLISHED)

172 Fourth Floor Includes Mumty Sqmt 32.00 ₹ 3,413.15 ₹ 1,09,220.80

FALSE CEILING WORK

Providing and fixing false ceiling at all height including providing and fixing of frame work made

of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120

gms/Sqm(both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed

to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm

running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450

mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with

25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm

c/c, including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board,

all as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the

cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board

with BIS certification marks)

12.5 mm thick tapered edge gypsum moisture resistant board ₹ 0.00 ₹ 0.00

Digitally signed by JAYA

178 Fourth Floor Includes Mumty Sqmt 50.00 ₹ 1,330.33 ₹ 66,516.60

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (

galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum)

sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm

thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to

form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm

made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel

to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles

of approved texture in the grid including, required cutting/making, opening for services like

diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended

from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm

dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips

of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all

heights as per specifications, drawings and as directed by Engineer-in-charge.

GI metal ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and

0.50 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/Sqm( both

sides inclusive) and electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending.

12.5mm thick square edge PVC Laminated Gypsum Tile of size 595x595mm, made of Gypsum

plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white

0.16mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the

backside with all edges sealed with the face side PVC film which goes around and wraps the

edges and is bonded to the edges and the back side metalized polyester film so as to make the

tile a completely sealed unit.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium

silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level,

suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @

120 grams per Sqmincluding both side) consisting of main ‘T’ runner suitably spaced at joints to

get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced

1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum)

sheet, 1200 mm long spaced between main ’T’ at 600 mm centre to centre to form a grid of

1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x 28 mm made of 0.33

mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid

of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated

steel of size (24x24x3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl

plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and

laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture in the grid,

including, cutting/ making opening “for services like diffusers, grills, light fittings, fixtures, smoke ₹ 0.00 ₹ 0.00

detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I.

slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash

fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm,

spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T

sections shall be pre-painted with polyester baked paint, for all heights, as per specifications,

drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area

will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut

outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of

0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity <0.043 w/mK.

185 Fourth Floor Includes Mumty Sqmt 87.00 ₹ 2,006.59 ₹ 1,74,573.33

DOOR AND WINDOWS

Providing & fixing Dressed seasoned sal wood work solid door /windows/other

frames/chowkhat and resistance to spread of flame of Class A Category with property of being

termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold

fast/lugs/SS dash fasteners of required dia and length including cost, conveyance, loading,

sundries, T&P required for the work etc. complete in all respect excluding GST as directed by the

Engineer-in-charge.

Supplying, fitting and fixing of 32mm thick factory made (both side 1 mm thick lamination) )

flush door shutters with as per IS- 2202/92 with solid core block board from seasoned and

treated 2nd class hard wood , Battern, bonded with phenol formal dehide synthetic resign

pressed over suitable adhesive including providing stainless steel hinges, locking arrengement

and other fittings & fixtures (all hardwares & fixtures, SS 202 make of 2nos of tower bolt- 150 x

10mm, Brass 100mm Mortice Latch & lock 6 leveres with pair of lever handles, door stopper etc.

fixing with stainless steel (SS 304 Grade) butt hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, including cost, conveyance, loading, sundries,

T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-

in-charge. ) required for the work complete in all respect excluding GST as directed by the

Engineer-in-charge.

188 Providing & fixing factory made single extruded WPC (Wood polymer Composite Door Frame) Rmt 5.00

solid door /windows/other frames/chowkhat comprising of virgin polymer of k value 58-60

(Suspension Grade),calcium carbonate and natural fibers( wood powder/rice husk/wheat husk)

and non toxic addictives ( maximum toxicity index of 12 for 100gms)fabricated with miter joints

after applying PVC Solvent cement and screwed with full body threaded star headed SS screws

having minimum frame density of 750 kg/cum, screws withdrawal stregth of 2200 N(Face) &

1100 N(Edge), minimum compresive strength 58N/mm2,modulus of elasticity 900 n/mm2 and ₹ 1,285.92 ₹ 6,429.58

resistance to spread of flame of Class A Category with property of being termite/borer

proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS

dash fasteners of required dia and length including cost, conveyance, loading, sundries, T&P

required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-

Digitally signed by JAYA

189 Providing & fixing factory made single extruded WPC (Wood polymer Composite) solid plain Sqm 10.00

flush door shutter of required size comprising of virgin polymer of k value 58-60 (Suspension

Grade),calcium carbonate and natural fibers( wood powder/rice husk/wheat husk) and non toxic

addictives ( maximum toxicity index of 12 for 100gms) having minimum denisity of 650 kg/cum

and screw withdrawal strength of 1800N(Face) & 900 N(Edge), minimum compresive strength

50N/mm2,modulus of elasticity 850 n/mm2 and resistance to spread of flame of Class A

Category with property of being termite/borer proof,water/moisture proof and fire retardant ₹ 5,590.74 ₹ 55,907.42

andall hardwares & fixtures, SS 202 make of 2nos of tower bolt- 150 x 10mm, Brass 100mm

Mortice Latch & lock 6 leveres with pair of lever handles, door stopper etc. fixing with stainless

steel (SS 304 Grade) butt hinges of required size with necessary full body threaded star headed

counter sunk S.S screws, including cost, conveyance, loading, sundries, T&P required for the work

etc. complete in all respect excluding GST as directed by the Engineer-in-charge.

190 20 Providing & Fixing of Anchor fasterner Nos 648.00 ₹ 23.60 ₹ 15,292.80

Providing and fixing double action hydraulic floor spring of approved brand and manufacture

conforming to IS : 6315, having brand logo embossed on the body / plate with double spring

mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding

in floors as required and making good the same matching to the existing floor finishing and

cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete

in all respect excluding GST as directed by the Engineer-in-charge.

191 3352.00 With brass cover plate minimum 1.25 mm thickness Nos 5.00 ₹ 4,020.26 ₹ 20,101.30

192 5279 Providing and fixing of Metal Fire door from ISO 9001:2015 certified Manufacturer . The door Sqmt 77.00

must have been manufactured with galvanised - GI sheet of GPSP Grade as per IS 277. All Fire

doors must satisfy the requirement of latest NBC 2016 Part 4 for Fire & Life Safety guidelines for

120 minutes Fire Rating with minimum 20 minutes Insulation properties along with its Stability &

Integrity for 120 minutes. The Prototype sample of the door must carry a prior test evidence as

per IS 3614 part-2 / BS 476 Part 20 & 22. The manufacturer must submit the copy of test

evidence prior to start of production. The offered test certificate should either carries it's Validity

or certificate must not be older than 5 years from CBRI / NABL Accreditated Lab i.e Spectro /

International Lab i.e Exova / TBW etc . Recommended fire door must also be certified by a third

party evaluation program from approved International agency like IFC/ Intertek/ Certifire and

must carry a lable on all doors . All doors should be finished with Powder coating in desired

regular RAL Shades. Door frame shall be Single rebate profile of section 100 x 57 mm made out

of 1.20mm thick galvanised steel sheet with a factory pre-punched groove so as to accomodate

Fire & smoke seal size 10x4mm . Frames should be butt jointed and field assembled with ₹ 6,228.65 ₹ 4,79,606.13

bolting system for proper strength .Frames should be provided with back plate for anchor

fasteners (payable extra ) for installation on a finished plastered wall opening. The Air gap

between Wall and frame can be filled with fire retardant sealant Door leaf should be minimum

46mm thick fully flush double skin door. Door leaf must be manufactured from 0.8mm (22

guage) thick galvanised steel sheet. The door should be provided with reinforcement pads to

receiving appropriate Hardwares of Becker Fire Solutions or Equivalent make. The Shutter shall

be filled with proprietary infill material . For Double leaf doors; astragal has to be provided on

meeting stile for both active and inactive leaf. Vision panels wherever required should be of 120

minutes fire rating and should be of non-wired type. All hardwares and FR Glass shall be payable

193 33431 Supply and fixing of Interlayered FR Glass (VISION PANEL) of Saint-gobain, Pyrobeck ,Glaverbel SQmt 2.00

or equivqlent make minimum 11 mm thick interlayred , 120 minutes fire Rated (EW120, EI 20

minutes ) Non Wired, Toughened Interlayered Glass of approved make and is to be fixed in

between the glass beading by using ceramic fiber of size 300 mm x 600mm (Clear vision ) and

the manufacturer should have tested the similar glass of similar size or bigger size . The Location

of the FR Glass will be as per the directions of Engineer-in-charge ( Actual supplied Glass size

will be meaured for payment).

FIXTURES FOR DOORS

194 323 Supply & fixing of fire rated SS Ball Bearing Hinges of size 100 x 75 x 3mm complet with SS Each 120.00

195 81 Supply & fixing of anchor fastners of maximum 80mm length. Each 180.00 ₹ 95.52 ₹ 17,192.70

196 1748 Supply & fixing of door fire rated closers Set 15.00 ₹ 2,062.57 ₹ 30,938.57

197 4651 Supply & fixing of F.S. double leaf panic exit devices. Single Leaf Panic Bar Set Each 15.00 ₹ 5,488.07 ₹ 82,320.99

198 3956 Supply & fixing of PEL905 Becker F.S. Make Panic Trim For Operation From The Other Side Of Each 15.00

199 701 Supply & fixing of Stainless Steel 304 grade 300mm Long Concealed Flush Bolt of BFBS1930 Each 15.00

with necessary screws as required.

200 4009 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand Sqmt 29.00

and manufacture, including providing and fixing top & bottom pivot & double action hydraulic

floor spring type fixing arrangement and making necessary holes etc. for fixing required door ₹ 4,730.27 ₹ 1,37,177.95

fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to

be paid separately).

201 75 Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. Each 12.00

complete as per direction of Engineer-incharge

202 474 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of Each 112.00

approved quality for aluminium door, with necessary screws etc complete as per direction of ₹ 559.11 ₹ 62,620.32

Engineer- in-charge

203 2338 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, SQmt 18.00

interlocked together through their entire length and jointed together at the end by end locks,

mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside

and outside locking with push and pull operation complete, including the cost of providing and

fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate ₹ 2,894.76 ₹ 52,105.61

strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling

80x1.25 mm M.S. laths with 1.25 mm thick top cover

204 365 Providing and fixing ball bearing for rolling shutters. Nos 2.00 ₹ 479.07 ₹ 958.14

205 311 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators Sqm 551.00

and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including

providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and ₹ 4,862.90 ₹ 26,79,459.00

secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge

Digitally signed by JAYA

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead

free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded

profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm

for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly

reinforced with galvanized mild steel section made of required shape & size as per CPWD

Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever

required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum

8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing

frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary

stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and

fusion welded/mechanically jointed duly sealed at all comers, including drilling of holes for fixing

hardware and drainage of water etc. After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon sealant over backer rod of approved size

and quality, all complete as per approved drawing conforming to CPWD specification & direction

of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be

as per design approved by Engineer-in-Charge.

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high

performance coatings as per design requirements and conforming to 1S: 3548 & IS: 16231.

Note:- Structural design proof checked from a Government

Engineering Institute, to be provided by the manufacturer for :

(i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height

more than 20m for all wind speeds

Three track three panels sliding window with two glazed

& one wire mesh panels with Aluminium channel for roller

track, wool pile, nylon rollers with SS 304 body.

206 Using R4 series with frame (115 mm & above) Sqm 574.00

X (45 mm & above) & both glazed and fly

screen sash (44 mm & above) x (65 mm &

above) with zinc alloy (zamak) powder coated

handle on every glazed panel along with multipoint

locking system. (Height above 1.8m)

Fixed window / ventilator with mullion / transom.

207 Using R1 series with frame (33 mm & above ) Sqm 8.00

X (35 mm & above) & mullion (33 mm & above) ₹ 8,908.27 ₹ 71,266.13

x (50 mm & above). (Height upto 0.90 metre)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.

with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :

208 934.41 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) Sqm 596.00 ₹ 1,366.16 ₹ 8,14,229.57

209 69 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing Rmt 731.00

weather silicon sealant over backer rod of approved quality as per architectural drawings and

direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm

long with SS screws etc. complete as per direction of Engineer-in-Charge.

210 Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar each 12.00

FABRICATION WORK

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2

mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and

stainless aquare pipe bracing of size case as per approved design and specification, buffing,

polishing etc. with the cost, conveyance of all material, cost of all labour etc. complete etc.

complete in all respect excluding GST as directed by the Engineer-in-Charge.

215 Fourth Floor Includes Mumty Kgs 661.00 ₹ 440.14 ₹ 2,90,932.54

216 184 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked Each 100.00

ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as ₹ 233.46 ₹ 23,346.30

per standard design complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer using structural steel etc. as required.

217 89.89 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever Kgs 1000.00

required,all complete

218 89.89 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kgs 1000.00 ₹ 143.09 ₹ 1,43,085.00

219 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, Kg 216.00

square or round bars etc. including priming coat with approved steel primer all complete. Fixed ₹ 185.50 ₹ 40,068.22

to openings/ wooden frames with rawl plugs screws etc.

WATERPROOFING WORK

220 Floor with Providing and applying two component elastomeric, polymers modified cementious Sqmt 2416.00

terrrace waterproofing membrane. The seamless waterproof membrane shall be applied in 2 coats. Rate

to include supply & laying of 40 GSM SCRIM Cloth to be laid over the 1st Coat. The product shall

exhibit at least 40% elongation with tensile strength greater than 40 Kg/cm2. The product shall

resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. The rate shall include (if

required), crack filling, grouting, tie rod filling, coving, ponding, etc complete. Quoted rate ₹ 802.40 ₹ 19,38,598.40

includes all costs towards providing coving for joints and providing water proofing treatment for

vertical faces above coving for a minimum height of 300mm and protecting the vertical faces,

providing waterproofing treatment of rainwater khurras to ensure 100% leak proof joint. All the

joints shall be seamless to ensure 100% waterproof treatment for treated area.(Terrace, Sunken

Portion of WC's, Toilet, Kitchen etc)

221 Terrace Providing and laying M20 concrete slope built-up cum protection layer of concrete screed. The Sqmt 930.00

concrete screed shall be laid on top of the chicken mesh. This layer will also provide the

necessary slope for water run-off. The layer shall have a minimum thickness of 40mm at the

slope end and shall be laid in slope of 1:200. The concrete screed shall be cured by water

ponding for a minimum of 15 days. Avg 75mm thick. Top surface of concrete shall be treated to

smooth finish with threaded line forming a grid of 2.5m x 2.5m. Rate to include cutting of groove ₹ 263.14 ₹ 2,44,720.20

of size 10 x 10mm forming a grid of 2.00m x 2.00m and filling the groove with UV resistant PU

sealant for all the joints with “U” foam of size 10mm X 10mm as per the technical

recommendations of the manufacturer. (For Terrace)

Digitally signed by JAYA

222 Floor Filling in Sunken Areas - Toilets/Kitchen/WC etc Providing and filling to sunken slabs with Sqm 1487.00

approved quality broken AAC blocks, lumps should not be in excess of 100mm through packing

and insterstices filled. To an average consolidated thickness of 150-200mm. Rate to include

levelling compacting and spreading 50mm thick 1:3:6 concrete to required slopes, gradients etc.

surface rendered to receive flooring, curing etc complete

223 RCC Works DSR 22.3: Providing and laying water proofing treatment to vertical and sqm 749.06

horizontal surfaces of depressed portions of W.C., kitchen and the

like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS 2645 in

recommended proportions including rounding off junction of

vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse ₹ 908.13 ₹ 6,80,244.63

sand) mixed with water proofing compound in recommended

proportion including rounding off junction of vertical and

horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot

at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints

of PVC sheet should be 100 mm wide and pasted to each

other with bitumen @ 1.7 kg/sqm).

MISCELLANEOUS WORK

224 24144 Providing and fixing Toilet cubicals as under with door, pilaster and divider of 18mm thick board Each 64.00

both side decorative compact laminate of required colour ,shade and sizes as

manufactured by Besco by Merino (Titan std) or Greenlam Sturdo Classique Grandeur or Solace (

SS series) by SPCMS or T Line or approved equivalent including stainless steel accessories ( SS-

304 grade) like square top rail, legs, knob, thumb turn and indicator, twin coat hook, door ₹ 50,568.62 ₹ 32,36,391.49

stopper, adjustable legs, gravity hinges, and locking arrangement, SS chanel etc as desired. all

complete as per drg and direction of Engineer in charge. (Cubical size =(1050x1500)mm,

Cubical Height =2100mm,External Laminate finish = Mettallic)

TOTAL COST OF CIVIL & FINISHES WORK ₹ 14,58,81,865.95

ABSTRACT SHEET : FURNITURE WORK

STUDENT TABLE : ROOMS

Supplying- Student Table : structure made of 1"x1'' tubular pipe frame 16 gauge,one side three

drawers 22 gauge m.s. Sheet dualpainted, plastichandle, s.s. Key, lock,top made of size 105cm x

60cm, 18mm plywood with laminated sheet,teakwood biding, polished. Foot rest support

Office Table 1500mm W X 750mm D X 740mm H Worktop Made from 25 mm Thick Pre-

laminated Particle board. All the edges are sealed with 2 mm thick PVC edge band all around,

Side Panels Made from 25 mm Thick Pre-laminated Particle board. All the edges are sealed with

2 mm thick PVC Edge band on the user side and 0.8 mm on the Top and Bottom Side. The side

panels have 2 glide screws each for leveling of the desk. Modesty Panel Made from 18 mm Thick

2 MR 2 Pre-laminated Particle board. All the edges are sealed with 0.8 mm thick PVC edge band all No 4 ₹ 18,000.00 ₹ 72,000.00

around Freestanding Pedestal The freestanding pedestal is made from 18 mm Pre-laminated

Particle board with a combination of 2mm and 0.8 mm PVC Edge band on all the exposed

surfaces as per requirement. The drawers are provided with suitable slides for smooth operation.

All the pedestal drawers are centrally locked with a single key.

The entire desk unit is assembled with suitable KD fittings and hardware. Each side panel is

provided with a cutout for laying cables for the monitor and other computer accessories.

Dinning Table set : Six Seater

Supplying six Seated Dinning table as per size mentioned in drawing made SS leg. Table top

shall made of Medium Density Fibre Board (MDF). table top thickness should be 25mm thick with

half round profile post forming, two long side shall have 2mm PVC edge banding of laminate

matching. Table shall have under structure of SS 202 grade. The table top shall mounted on

cross bars of size 500X500mm. The vertical support bar shall be made of SS 202 hollow square

pipe having the cross section of 80 x 80mm, it shall have the height adjustment leveller to cope

the uneven surface areas.. etc.complete as directed by engineer in charge/Architect

Suppy and installation of canteen chair. Chair dimension of 450W x587 Dx805H seat and back

of chair shall made of molded plastic . Under structure of chair made of SS 202 grade 4 Leg

frame. Dia 25.4x1.2 hk 435L. Footcap made of Nylon, dia19 inner diameter. seat base made of

PP , Ergonomically silk design. Chir shold be stron and durable ,foot cap should be semi glossy ,

seat and back cover should be Matt finish,4 leg frame with chromw plated. etc; complete as

directed by engineer in charge/ Architect.

Class Room Table - Providing & Supplying Table of linear side station workstation with

5 MR 5 understructure of leg, cross connector, Supplying & placing 25mm thk prelaminated rectanguler No 15 ₹ 19,500.00 ₹ 2,92,500.00

ws with pvc lipping of size 1500mm X 600mm X 750mm H

Supplying of revolving chair Seat & Back Upholstered with Molded Foam Seat & Back is Covered

6 MR 6 with ABS. Multi-Locking Mechanism with any Position Locking System Seat in Waterfall design to No 4 ₹ 8,000.00 ₹ 32,000.00

provide Max.Comfort for Long working hours.Loop arm with Synchronized Movement.

Ergonomically Design Back to provide Extra Lumber Support.

VISITOR & RECREATION ROOM CHAIR

Supply and Installation Nylon mesh mid back visitor chair Supply and Installation of Nylon make

Mesh High back chair, overall dimension of chair 680 Lx 680 W x 990 H, Base should be

cantilever frame made of MS tube, 550W x 535D, 3mm thick Seat 490 Wx515 Dx475 H(eff), 47

thk, back rest 515 W x 660H, 515 H. The seat shall be made up of 12 10.1mm Thick hot-

pressed plywood upholstered with 23 moulded foam and fabric and polyurethane foam density

45-50kg/cu.m, 35mm thick Seat upholstery matenal shall be made polyester Seat bottom cover

shall be made of Non woven fabric, Back shall be made of MS HR sheet having thickness of 6mm,

arm rest should be fixed made of Polypropylene,etc. complete as directed by architect and

engineer in-charge

STUDENT CHAIR -

Providing Student chair of overall size mentioned below make of 1 ¼” (1.25) ERW pipe of 16

gauge with seat & back made from 12 mm hot press ply & provided with PU mold of 40 density

& Covered with U-foam for seat 75 mm thick (minimum) or as per requriment with best approved

tapestry with duo colour fabric combination with polka patter on base & handle provide robust

rough as per sample approved by Architect & Engineer incharge.

Digitally signed by JAYA

Supplying of Box Type Openable metal bed with 18 m.m. thick M.R.Grade plywood with 1.0 mm

thick lamination sheet as per drawing on all side, bottom & top with 18mm thick M.R.Grade

plywood with malamine polish inside, back and bottom side and stainless structure shall be of 50

mm × 25 mm M.S.Powder coated, leg shall be of 38 mm × 38 mm M.S.Power coated pipe of

1.6 mm thick power coating shall be of 60 to 70 Microns.

P&F Double Bed inside storage provision & top open with hydraulic pump inside white laminate

out side approved laminate with plywood, hardware finish.(5.5x6.5). Also Bed headrest in

plywood laminate finish as per design & ply provide for cushion headrest Fabric & mattress work

not include in this.Rate includes Side Table with single Drawer in plywood both side laminate

hardware & labour finish. 1.5x1.5

Supplying of 4" thick single bed matress made from 40 density u-fom with cotton cloth cover

12 MR 11 and Quilte cover with all required hardware like chain etc material and labour. No. 200 ₹ 6,500.00 ₹ 13,00,000.00

(A) 1800mm x 900mm Size

Supplying of 4" thick doble bed matress made from 40 density u-fom with cotton cloth cover and

Quilte cover with all required hardware like chain etc material and labour.

Wardrobe Width - 946.0 mm, Depth - 598.0 mm, Height - 1941.0 mm Material : Body panels

are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded

with 0.8 mm thick PVC edge banding. Door are made of 18 mm thick Prelaminated Particle

board with all the exposed edges are edge banded with 0.8 mm thick PVC edge Banding. Side

panel are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge

banded with 0.8 mm thick PVC edge banding and with imported H.D.F. foil wrapped decorative

14 MR 13 trim fixed on to it. Drawer components are made of 18 mm thick Prelaminated Particle Board .All No. 202 ₹ 31,000.00 ₹ 62,62,000.00

the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Body back and

drawer bottom are made of 8 mm thick Prelaminated particle board. Top cornice is made of

imported H.D.F. foil wrapped decorative Trim. Hardware : The high quality hardware used like

Roller slides, Hinges , minifix, wooden dowels is of make Hettich.. Lock used for main door is 3

way lock and lock used for drawer is cam lock Construction : Knock Down construction. Packets :

2 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade

Supplying and Laying Featherlite pillow of medium size 20" x 30" as per the instruction and As

per approved by Architect and approved by Engineer In-charge.

Supplying and Laying Woolen Blanket as per the instruction and As per approved by Architect

and approved by Engineer In-charge.

17 MR 16 Providing and supplying cello make bath room set with bucket,tumbler and stool.SIZE: 41 cm x NOS. 202 ₹ 1,600.00 ₹ 3,23,200.00

41 cm x 38 cm with Mug - 1.5 Ltr. ; Bucket - 25 Ltr

Providing and supplying cello make bath room set with bucket,tumbler

Wall hook hanger. 5 nos hook in one set

Providing,supplying and fixing SS hook hanger with 5 nos of hook in one set.

Aluminium cloth Hanger

20 MR 19 Providing, supplying Ivanic Aluminium Cloth Hanger Heavy Duty 202 Grade as per instructions Box 15 ₹ 560.00 ₹ 8,400.00

of engineer-in-charge(24 nos. in one box)

Plactic dustbin Small

Providing and sypplying Aditi make High Quality stainless Plactic Dustbin-6-10 Liters capacity

Plactic dustbin Big

Providing and sypplying Aditi make High Quality stainless s teel Dustbin-46-50 Liters capacity

23 MR 22 Providing and supplying Link O Line Round 65mm with 5 Keys ,Steel Double Locking Room NOS. 50 ₹ 527.00 ₹ 26,350.00

Providing and supplying wheelchair as specified specification.It shuld be folding MS powder

24 MR 23 coated frame with fixed arm and footrest,superior quality spoke wheels with united No. 2 ₹ 11,250.00 ₹ 22,500.00

brackets,seats width 46cms (approx.),Maximum load bearing : 100 kgs(approx.)Net weight of

wheelchair:18 kgs(approx.)

ACRYLIC SIGNAGES (NAME PLATE)

Providing and fixing ACRYLIC SIGNAGES of 10 mm Acrylic name plate with vinyl cut work on top

25 MR 24 of brand Ptglass, astari etc., with all laser and cnc work, including all material, labour, studs for NOS 50 ₹ 1,250.00 ₹ 62,500.00

mounting and other hardwares, waste of materials etc. and complete the work satisfactorily as

per instruction of Architect or Engineer-in charge.

Shutter below platform

Providing and fixing 19mm thk. BWP ply with 1.00mm thick laminate shutters with 50mm x

25mm teak wood frame work finished with polished /paint. Division of shutters shall be made

equally according to the length of the counter. Shutter having a s.s. handle,hinges,lock etc.

Curtain -Supply of Main curtain fabric for curtains for all heights/locations with required width

should comprise of suitable fabric of approved shade, make and sample. Fabric width to be

27 MR 27 considered 1.37mt (54") or as per the available opening. Maximum fabric considerd for folding at SMT 500 ₹ 1,350.00 ₹ 6,75,000.00

Top & bottom to be 0.4 Rmt, all complete as per approved design and drawings and direction of

Engineer-in-Charge

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with

28 9.46.3 two chromium plated brass brackets fixed meter 450 ₹ 525.55 ₹ 2,36,497.50

with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm Dia

Kitchen Equipment

Providing and Fixing Clean Dish Landing Table with Angle of Storage for Dishwasher rack

(850mmX900mmX850mm) as per Detail specifications,make and approved by Engineer In-

Digitally signed by JAYA

Providing and Fixing Clean Dish Landing Table with Angle of Storage for Dishwasher rack

(850mmX900mmX850mm) as per Detail specifications,make and approved by Engineer In-

Providing and Fixing S.S Exhaust Hood With SS Oil Filter (S.S Exhaust Hood S.S 304 , 18 SGW

S.S, Oil Filter S.S 304 , 18 SGW S.S ) OF SIZE 3600x900x600 mm as per Detail specifications,

make and approved by Engineer In-charge

29 MR 29 Providing and Fixing Exhusht Blower 3 HP 3 Phase ( Motor Kilosker & Crompton ) Heavy duty

centrifugal fan for blower , fabricated from heavy M.S. sheets/channel thickness 5 mm and plates

reinforced with angle iron 50 x 50 x 5 mm thickness for sturdy and smooth performance

dynamically balance impeller fan size 525 mm plate thickness 5 mm capacity 8000 CFM ,

pressure 40 mm water gauge , motor 3 HP 960 RPM , 2.25 KW three phase as per Detail

specifications,make and approved by Engineer In-charge

Providing and Fixing G.I Ducting 20 SGW, Chimney 15"x15" as per Detail specifications,make

and approved by Engineer In-charge

Providing and Fixing Two Burner Gas Range with 1 u/s of size 1200x600x800 mm as per Detail

specifications, make and approved by Engineer In-charge.

Providing and Fixing Chapati Plate with Puffer of size 1000x600x800 mm as per Detail

specifications, make and approved by Engineer In-charge.

Providing and Fixing Dough kneader with Capacity : 10 Kgs , Elt. Motor : 1 H.P of size

32 MR 30 38"x19"x35" inches as per Detail specifications, make and approved by Engineer In-charge.

Providing and Fixing Pulveriser with Capacity : 25 Kgs , Elt. Motor : 1 H.P, 1 phase RPM-2800 of

size 19"x17"x24" inches as per Detail specifications, make and approved by Engineer In-charge.

Providing and Fixing Stock Pot Range with 1 u/s of size 600x600x700 mm as per Detail

specifications, make and approved by Engineer In-charge.

Providing and Fixing Counter Top with 1 u/s of size 47"x25"x34" inches as per Detail

specifications, make and approved by Engineer In-charge.

Providing SS 304 Grade Utensil Storage Rack in Store of 2000mm W X 2250mm H X 900mm D

size as approved b y Engineer In Charge

33 MR 31 Providing and Fixing Bain Marie 6+1 Bowl (06 round bowl,+ 01 Rectangular Bowl total 07 bowl) Job 1 ₹ 30,86,815.00 ₹ 30,86,815.00

of size 47” X 25” X 34” As per Specifications.

Note: The work shall be completed in all respect as per direction of Engineer-in-charge (EIC). The

Contractor need to submit the complete proposal with shop drawing regarding complete kitchen

set-up etc. prior to procure of items for approval from EIC. Items mentions here are indicative

only, some items may add/delete as per the actual requirement of the user/site etc.

Bed Side Table:SITC of side table with size 450mm X 450mm X 500mm of approved make etc

complete as per drawings and design supplied by architect and instruction given by authority

40 MR 32 and Engineer in-charge. Contractor have to approve sample from architect and client before Each 242 ₹ 8,500.00 ₹ 20,57,000.00

execution. Side Table: 450mmx 450mmx 500 mm

side table with 18mm ply in app.laminate finish

41 MR 33 Reception Table - Reflection (2400 x 870) Nos 2 ₹ 1,44,000.00 ₹ 2,88,000.00

TV Unit as per Drawing & specifications etc complete as per drawings and design supplied by

42 MR 34 architect and instruction given by authority and Engineer in-charge. Contractor have to approve Nos 2 ₹ 1,02,793.00 ₹ 2,05,586.00

sample from architect and client before execution.

Center Table:SITC of Round center table of approved make etc complete as per drawings and

design supplied by architect and instruction given by authority and Engineer in-charge.

Contractor have to approve sample from architect and client before execution.

42 MR 35 ROUND TABLE (CENTRE TABLE) Nos 4 ₹ 16,500.00 ₹ 66,000.00

SIZE; 900mm DIA

Top: 18mm PLB Top

Support: MS Powder Coated Legs.

TOTAL AMOUNT (Rs.) ₹ 2,37,07,236.50

TOTAL AMOUNT (Rs.) ₹ 2,37,07,236.50

1 Earth work in excavation of foundation in hard soil or gravelly soil including dressing of sides

and leveling the bed upto the required depth and depositing the excavated materials away from

the work site with intial leads and lifts, including shoring, shuttering & dewatering (if required)

with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for

the work complete in all respect excluding GST as directed by the Engineer- in- charge.

260 Consolidation of subgrade with power road roller of 8 to 12 tonne capacity to required slope

including making good the undulations etc. with earth or Sqm 1,589.00 ₹ 148.79 ₹ 2,36,432.08

quarry spoils etc.and rerolling the subgrade.

Construction of granular sub-base by providing close graded Material conforming to

specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to

work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor

grader on prepared surface and compacting with vibratory power roller to achieve the desired

density, complete as per specifications and directions of Engineer-in-Charge.

261 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

262 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to

0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with

water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub-

base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 Cum 317.80 ₹ 2,828.46 ₹ 8,98,884.59

tonne capacity to achievethe desired density, complete as per specifications and

directions of Engineer-in-Charge.

263 Providing and laying bituminous macadam using crushed stone aggregates of specified grading

premixed with bituminous binder, transported to site by tippers, laid over a previously prepared

surface with paver finisher equiped with electronic sensor to the required

grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per Cu.m 50.25 ₹ 10,393.44 ₹ 5,22,270.36

specifications to achieve the desired compaction and density, complete as per specificatons and

directions of Engineer-in-Charge.

264 Providing and applying Tack coat with Bitumen emulsion using emulsion pressure distributor @

0.20 kg / sqm on the prepared bitumenous / granular surface cleaned with mechanical broom as Sqm 2,010.00 ₹ 8.26 ₹ 16,602.60

per MORTH specification clause 5.2 / 502 Pg. 124.

Digitally signed by JAYA

265 Providing and laying Bituminous concrete using crushed stone aggregates of specified grading,

premixed with bituminous binder and filler, transporting the hot mix to work site by tippers,

laying with paver finisher equiped with electronic sensor to the required grade,

level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the Cum 50.25 ₹ 14,184.78 ₹ 7,12,785.20

desired compaction and density as per specification, complete and as per directions of Engineer-

266 Providing & laying Plain Cement concrete (PCC ) of proportion (1:4:8) in foundation and Cum

floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved

quality and from approved quarry including hoisting, lowering and laying concrete in layers not

exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete

including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, 138.23 ₹ 6,681.28 ₹ 9,23,519.65

Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required)

including hire and running charges of water pump required for the work etc complete in all

respect excluding GST as directed by the Engineer-in-charge

267 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, Sqm

parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape,

made by table vibratory method using PU mould, laid in required colour &

pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of

inter locking paver blocks into the sand bedding layer through vibratory compaction by using

plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and 292.00 ₹ 949.96 ₹ 2,77,388.61

pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

80 mm thick C.C. paver block of M-30 grade with approved

color design and pattern.

268 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, Sqm

parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape,

made by table vibratory method using PU mould, laid in required colour &

pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of

inter locking paver blocks into the sand bedding layer through vibratory compaction by using

plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and 292.00 ₹ 903.36 ₹ 2,63,781.70

pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

60 mm thick C.C. paver block of M-30 grade with approved

color design and pattern.

269 Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ Sqm

colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator

machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe

heater, driven by experienced operator on road surface including cost of material, labour, T&P,

cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per

direction of Engineer-in-charge and accordance with applicable

specifications.

270 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement Cum

concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1

cement: 3 coarse sand) including making joints with or without grooves (thickness of joints

except at sharp curve shall not to more than 5mm), including making drainage opening wherever 40.50 ₹ 9,844.71 ₹ 3,98,710.67

required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging

shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-

271 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded Each

ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically

welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge.

The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The

slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both

sides with at least 12 cm of reflective area up each side. The luminance intensity should be as 150.00 ₹ 200.74 ₹ 30,110.40

per the specification and shall be tested as described in ASTM I: 809 as recommended in BS:

873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming

to IS, as per procedure recommended by the manufacturer complete and as per direction of

Engineer-in-charge.

272 Providing and fixing PE (Polyethylene) speed bump with 50mm bump size and 365mm (+-3) in Rm

width with high resistent interlocking pre-colored UV stabilizer, studded with reflectors on either

side, they are clearly visible to motorists during night hours of approved brand and manufacturer,

including making hole, cleaning of surface, grouting holes with apprpriate epoxy and fixing with 6

nos of nail per bump etc. all complete.

TOTAL COST OF ROAD WORK ₹ 54,27,828.61

STORM WATER DRAIN

1 Excavation for foundation, plinth beams, rafts, in earth, soil of all types, sand, gravel, hard

murum & existing murum filling, including removing and shifting the excavated material up to a

distance of 1500 metres beyond building area and lift as specified, and stacking and /or

spreading as directed, dewatering by pump, preparing the bed for the foundation & necessary CUM 266.407 ₹ 333.82 ₹ 88,932.46

back filling with available earth, watering, ramming Including shoring, strutting etc complete as

directed. including royalties as applicable if any.

2 Providing & laying Plain Cement concrete (PCC ) of proportion (1:4:8) in foundation and

floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved

quality and from approved quarry including hoisting, lowering and laying concrete in layers not

exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete

including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, CUM 30.505 ₹ 6,681.28 ₹ 2,03,809.71

Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required)

including hire and running charges of water pump required for the work etc complete in all

respect excluding GST as directed by the Engineer-in-charge

Digitally signed by JAYA

Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of

Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies,

Staircase, Column, Beam Parapets, Window sills, Lofts, Railings etc. ) as per approved designs

and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes

at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using

screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher

broken granite stone chips of approved quality from approved quarry, washed and cleaned to be

mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying

and compacting concrete by using vibrators, watering and curing for 28 days, including cost of

required steel centering and shuttering there after dismantling and removing the debrises ₹ 0.00 ₹ 0.00

away from the work site and finishing the exposed surface smooth providing grooves or beads

wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all

materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in

all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires

and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding

wires and tying the grills and placing in proper position excluding GST as directed by the

Engineer-in-charge.

5 Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of

approved make for RCC work of required diameter & of approved quality including

straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting,

lowering and placing in position as per the approved design & drawings with provision for fan

hooks where required including the cost, conveyance of reinforcement bars or tor steel and

binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc.

required for the work complete for the work in all heights as per the specification & excluding Qntl 56.344 ₹ 12,153.53 ₹ 6,84,781.72

GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be

calculated on standard weight. Weight of binding wire will not be considered for measurement.

No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and

wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)

6 12 m.m thick cement plaster in cement mortar of mix (1:6) in all floors at all height using

screened & washed sharp river sand for mortar with approved quality of cement, finished

smooth to the even surface of the brick masonry walls after racking out the joints properly

,providing grooves wherever necessary including cost, conveyance, loading, unloading,stacking,

royalties of all Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering,

Curing,Rounding of corners etc. required for the work complete in all respect excluding GST as

directed by the Engineer- in- charge.

7 Neat Cement Punning M2 206.364 ₹ 77.79 ₹ 16,053.88

8 Providing and fixing factory made precast RCC perforated drain covers, having concrete of

strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos

longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia

perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50

mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

9 Extra for providing and mixing water proofing material in cement per bag of plaster work in

proportion recommended by the manufacturers.

10 102.6 Filling in foundation and plinth with excavated materials including watering and ramming as

directed by the Engineering-in -Charge.

11 173.8 Disposal of surplus excavated materials within the area specified & directed by BDA / EIC (all

kinds of soil, boulders, concrete or any other excavated materials) including all lifts, spreading in

layers, breaking clods and leveling to disposal ground arranged by the contractor inclusive from

the site of excavation to the site of disposition(upto take 10 Km.) etc. complete in all respect

excluding GST as directed by the Engineer- in- charge.

TOTAL COST OF STORM WATER DRAIN WORK ₹ 19,03,627.75

A1 CIVIL & FINISHES WORK

1 199.6 Earth work in excavation of foundation in hard soil or gravelly soil including dressing of sides

and leveling the bed upto the required depth and depositing the excavated materials away from

the work site with intial leads and lifts, including shoring, shuttering & dewatering (if required)

with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for

the work complete in all respect excluding GST as directed by the Engineer- in- charge.

2 213.49 Extra lift of 1.5m or part there of over the initial lift of 1.5m in hard soil or gravelly soil

3 4566.5 Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors

using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality

and from approved quarry including hoisting, lowering and laying concrete in layers not

exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete

including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, cum 12.444 ₹ 7,104.66 ₹ 88,410.41

Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required)

including hire and running charges of water pump required for the work etc complete in all

respect excluding GST as directed by the Engineer-in-charge.

Digitally signed by JAYA

Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of

Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies,

Staircase, Column, Beam Parapets, Window sills, Lofts, Railings etc. ) as per approved designs

and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes

at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using

screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher

broken granite stone chips of approved quality from approved quarry, washed and cleaned to be

mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying

and compacting concrete by using vibrators, watering and curing for 28 days, including cost of

required steel centering and shuttering there after dismantling and removing the debrises ₹ 0.00

away from the work site and finishing the exposed surface smooth providing grooves or beads

wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all

materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in

all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires

and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding

wires and tying the grills and placing in proper position excluding GST as directed by the

Engineer-in-charge.

4 5201.1 Footing/Raft Concrete cum 42.5425 ₹ 8,135.27 ₹ 3,46,094.89

Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of

approved make for RCC work of required diameter & of approved quality including

straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting,

lowering and placing in position as per the approved design & drawings with provision for fan

hooks where required including the cost, conveyance of reinforcement bars or tor steel and

binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc.

required for the work complete for the work in all heights as per the specification & excluding

GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be

calculated on standard weight. Weight of binding wire will not be considered for measurement.

No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and

wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing

treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs,

podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc.,

prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for

vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces

and applying the same from negative (internal) side with the help of synthetic fiber brush. The

material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing

permeability of concrete by more than 90% compared with control concrete as per DIN 1048

and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be

capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all

complete as per specification and the direction of the engineer-in-charge. The product

performance shall carry guarantee for 10 years against any leakage.

7 For vertical surface two coats @ 0.70 kg per sqm Sqm 106.26 ₹ 496.28 ₹ 52,735.14

8 For horizontal surface one coat @1.10 kg per sqm Sqm 77.35 ₹ 382.52 ₹ 29,588.00

Aerated Autoclaved Fly ash (AAC) bricks/ masonary in filler/ inside walls using A.A.C blocks of

size 625mm x 200mm x200mm having compressive strength not less than 4 N/mm2

confirmijng to IS:2185(PART-3)-2005 and IS:6441-1972 in cement mortor of mix (1:6) and

screened and washed sand for mortar for use in superstructure including splays, cutting, circular

moulding, corblling, chamfering and simillar such type of works, watering and curing etc.

including cost, conveyance, royalti, loading, unloading and taxes of all materials, cost of all

labour, scaffolding, sundries T & P required for the works etc. complete in all respect as directed

by the engineer in charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer using structural steel etc. as required.

10 89.8855608 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever

required,all complete

11 30.5 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kgs 482.34 ₹ 143.09 ₹ 69,015.62

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per

manufacturer's specifications including appropriate priming coat, preparation of surface, etc.

Providing and Placing in position suitable PVC water stops conforming to IS:12200 for

construction/ expansion joints between two RCC members and fixed to the reinforcement with

binding wire before pouring concrete etc. complete:

13 Dumb bell with central bulb (180 mm wide, 8 mm thick) Rmt 43.2 ₹ 260.67 ₹ 11,261.12

14 Providing and applying of swellable type water stop tape, 19 mm x 25 mm thick in linear metre

(expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining

walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After

cleaning the surface, one coat of required primer for swellable water stop tape shall be applied

throughout the length of the joint @3.78 litre per 240 running metre. Over the primed surface Rmt 43.2 ₹ 557.98 ₹ 24,104.87

swellable type water stop tape shall be placed. The work shall be carried out all complete as per

specification and the direction of the Engineer-In-Charge. The product performance shall carry

guarantee for 10 years against any leakage.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks

1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) as per standard design :

15 With 20x20 mm square bar Each 22 ₹ 530.01 ₹ 11,660.18

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and

approved quality

16 Rectangular shape 600x450 mm internal dimensions Each 4 ₹ 1,398.87 ₹ 5,595.50

17 Filling in foundation and plinth with excavated materials including watering and ramming as

directed by the Engineering-in -Charge.

18 Disposal of surplus excavated materials within the area specified & directed by BDA / EIC (all

kinds of soil, boulders, concrete or any other excavated materials) including all lifts, spreading in

layers, breaking clods and leveling to disposal ground arranged by the contractor inclusive from

the site of excavation to the site of disposition(upto take 10 Km.) etc. complete in all respect

excluding GST as directed by the Engineer- in- charge.

Digitally signed by JAYA

TOTAL COST OF CIVIL & FINISHES WORK ₹ 18,43,758.39

Landscape Works

1 2.1 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable

materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50

m and making up the

trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure

before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

2 2.12 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all

weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing,

flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for sqm 375.00 ₹ 60.92 ₹ 22,843.88

planting new grass, including disposal of all rubbish with all leads and lifts.

3 2.33 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing

ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling

the surface with light roller make the surface smoothen and light waterning with sprinkler and per sqm 250.00 ₹ 214.28 ₹ 53,571.00

maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-

4 2.1 Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30

days or more till the grass forms a thick lawn, free from weeds and fit for mowing including

supplying good earth, if needed (the grass and good earth shall be paid for separately).

2.10.1 In rows 5 cm apart in both directions sqm 125.00 ₹ 17.69 ₹ 2,211.25

5 2.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure

or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by

20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing

including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure,

sludge or extra good earth if needed to be paid for separately)

2.14.3 Holes 60 cm dia, and 60 cm deep nos 50.00 ₹ 43.73 ₹ 2,186.30

2.14.4 Holes 45 cm dia, and 45 cm deep. nos 90.00 ₹ 18.69 ₹ 1,682.10

6 2.4 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km

lead complete (manure measured in stacks

will be reduced by 8% for payment) :

2.4.1 Screened through sieve of I.S. designation 20 mm cum 48.00 ₹ 254.01 ₹ 12,192.73

7 2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead

complete (earth measured in stacks will be reduced by 20% for payment).

8 2.3 Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete

(sludge measured in stacks will be reduced by 8% for payment).

A UNDER GROUND TANK

A1 CIVIL & FINISHES WORK

1 Earth work in excavation of foundation in hard soil or gravelly soil including dressing of sides CUM

and leveling the bed upto the required depth and depositing the excavated materials away from

the work site with intial leads and lifts, including shoring, shuttering & dewatering (if required)

with cost of all Labour, Hire & Running charges of the water pumps, Sundries, T & P required for

the work complete in all respect excluding GST as directed by the Engineer- in- charge.

2 Extra lift of 1.5m or part there of over the initial lift of 1.5m in hard soil or gravelly soil CUM

3 Excavation Work 3mt to 4.5mt Cum 67.456 ₹ 383.31 ₹ 25,856.22

4 Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors cum

using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality

and from approved quarry including hoisting, lowering and laying concrete in layers not

exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete

including cost, conveyance , loading,unloading,royalties of all materials, cost of all labour, 12.648 ₹ 7,104.66 ₹ 89,859.76

Sundries, T&P required for the work including shoring, shuttering and dewatering ( if required)

including hire and running charges of water pump required for the work etc complete in all

respect excluding GST as directed by the Engineer-in-charge.

Providing ,Lifting, Hoisting & Laying Reinforced Cement Concrete of M-30 Grade in all type of

Concrete works( i.e footing, Plinth Band, Lintels, Chajja, Shelf fins, Roof slabs, Balconies,

Staircase, Column, Beam Parapets, Window sills, Lofts, Railings etc. ) as per approved designs

and drawings having a minimum compressive strength ( in work test) 30 N/mm2 in 15 cm. cubes

at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using

screened & washed sharp river sand for mortar and 10 mm. to 20 mm. size black hard crusher

broken granite stone chips of approved quality from approved quarry, washed and cleaned to be

mixed in concrete mixture with approved quality of cement including hoisting, lowering, laying

and compacting concrete by using vibrators, watering and curing for 28 days, including cost of

required steel centering and shuttering there after dismantling and removing the debrises

away from the work site and finishing the exposed surface smooth providing grooves or beads

wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all

materials, cost of all labours, scaffolding, sundries, T&P required for the work etc. complete in

all respect but the excluding cost & conveyance of M.S. rods or Tor Steel and Binding wires

and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel and binding

wires and tying the grills and placing in proper position excluding GST as directed by the

Engineer-in-charge.

5 Footing/Raft Concrete cum 43.2575 ₹ 8,135.27 ₹ 3,51,911.62

Digitally signed by JAYA

Providing & fixing Thermo mechanically treated bars (Fe-500 D) Reinforcement bars of

approved make for RCC work of required diameter & of approved quality including

straightening, cutting, bending, binding, welding , joining (if necessary), tying the grills, hoisting,

lowering and placing in position as per the approved design & drawings with provision for fan

hooks where required including the cost, conveyance of reinforcement bars or tor steel and

binding wires of 18 to 20 gauge, cost of all labour, loading, unloading, labour cess, T&P, etc.

required for the work complete for the work in all heights as per the specification & excluding

GST as direction of Engineer-in-Charge. (Linear measurements will be taken & quantity will be

calculated on standard weight. Weight of binding wire will not be considered for measurement.

No payment will be made for overlap, couplings, welded joints spacer bars,stays, hangers and

wastage. Cost of these items shall be deemed to be included in the rates for reinforcement)

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing

treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs,

podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc.,

prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for

vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces

and applying the same from negative (internal) side with the help of synthetic fiber brush. The

material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing

permeability of concrete by more than 90% compared with control concrete as per DIN 1048

and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be

capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all

complete as per specification and the direction of the engineer-in-charge. The product

performance shall carry guarantee for 10 years against any leakage.

12 For vertical surface two coats @ 0.70 kg per sqm Sqm 172.16 ₹ 496.28 ₹ 85,440.25

13 For horizontal surface one coat @1.10 kg per sqm Sqm 78.65 ₹ 382.52 ₹ 30,085.28

Aerated Autoclaved Fly ash (AAC) bricks/ masonary in filler/ inside walls using A.A.C blocks of

size 625mm x 200mm x200mm having compressive strength not less than 4 N/mm2

confirmijng to IS:2185(PART-3)-2005 and IS:6441-1972 in cement mortor of mix (1:6) and

screened and washed sand for mortar for use in superstructure including splays, cutting, circular

moulding, corblling, chamfering and simillar such type of works, watering and curing etc.

including cost, conveyance, royalti, loading, unloading and taxes of all materials, cost of all

labour, scaffolding, sundries T & P required for the works etc. complete in all respect as directed

by the engineer in charge.

14 Upto Ground Floor Cum 4.296 ₹ 9,923.21 ₹ 42,630.11

PLASTERING AND FINISHING WORK

12 m.m thick cement plaster in cement mortar of mix (1:6) in all floors at all height using

screened & washed sharp river sand for mortar with approved quality of cement, finished

smooth to the even surface of the brick masonry walls after racking out the joints properly

,providing grooves wherever necessary including cost, conveyance, loading, unloading,stacking,

royalties of all Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering,

Curing,Rounding of corners etc. required for the work complete in all respect excluding GST as

directed by the Engineer- in- charge.

15 Upto Ground Floor Sqmt 129.864 ₹ 231.99 ₹ 30,126.89

20mm thick C.P. in C.M.(1:6) over brick masonary in all floors at all height using screened &

washed sharp river sand for mortar with approved quality of cement, finished smooth to the even

surface of the brick masonry walls after racking out the joints properly ,providing grooves

wherever necessary including cost, conveyance, loading, unloading,stacking, royalties of all

Materials, cost of all Labour, T&P, Sundries , Scaffolding, Watering, Curing,Rounding of corners

etc. required for the work complete in all respect excluding GST as directed by the Engineer- in-

17 Extra for providing and mixing water proofing material in cement plaster work in proportion

bag of 50 kg of cement

recommended by the manufacturers.

Finishing wall surface of walls with cement based wall putty ( water based) of approved make

and finishing the surface smooth by sand papering to receive paint in all floor & at all heights

including cost, coveyance, loading , unloading ,stacking of all Materials, cost of all

Labour,Sundries, Staging,Scaffolding, T&P required for the work etc. complete in all respect

excluding GST as directed by Engineer-in-charge.

Priming 1 coat with wall primer water bond cement primer including cost, coveyance, loading ,

unloading ,stacking of all Materials, cost of all Labour,Sundries, Staging,Scaffolding, T&P

required for the work etc. complete in all respect excluding GST as directed by Engineer-in-

Wall/ Ceiling painting 2 coats with Plastic emulsion paint of approved shade on new work to give

an even shade ,including cost, coveyance, loading , unloading ,stacking of all Materials, cost of

all Labour,Sundries, Staging,Scaffolding, T&P required for the work etc. complete in all respect

excluding GST as per specification as directed by Engineer-in-charge.

Finishing to the exposed surfaces of wall with weather coat of any approved shade on new

work 2 coats to give an even shade including watering ,curing,cost,conveyance of all material

cost of all labour,brushes ,T& P etc and necessary scaffolding work complete in all respect

excluding GST as per specification as directed by Engineer-in-charge.

22 Providing & fixing factory made single extruded WPC (Wood polymer Composite Door Frame) Rmt

solid door /windows/other frames/chowkhat comprising of virgin polymer of k value 58-60

(Suspension Grade),calcium carbonate and natural fibers( wood powder/rice husk/wheat husk)

and non toxic addictives ( maximum toxicity index of 12 for 100gms)fabricated with miter joints

after applying PVC Solvent cement and screwed with full body threaded star headed SS screws

having minimum frame density of 750 kg/cum, screws withdrawal stregth of 2200 N(Face) &

1100 N(Edge), minimum compresive strength 58N/mm2,modulus of elasticity 900 n/mm2 and 5.48 ₹ 1,285.92 ₹ 7,046.82

resistance to spread of flame of Class A Category with property of being termite/borer

proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS

dash fasteners of required dia and length including cost, conveyance, loading, sundries, T&P

required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-

Digitally signed by JAYA

Supplying, fitting and fixing of 32mm thick factory made (both side 1 mm thick lamination) )

flush door shutters with as per IS- 2202/92 with solid core block board from seasoned and

treated 2nd class hard wood , Battern, bonded with phenol formal dehide synthetic resign

pressed over suitable adhesive including providing stainless steel hinges, locking arrengement

and other fittings & fixtures (all hardwares & fixtures, SS 202 make of 2nos of tower bolt- 150 x

10mm, Brass 100mm Mortice Latch & lock 6 leveres with pair of lever handles, door stopper etc.

fixing with stainless steel (SS 304 Grade) butt hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, including cost, conveyance, loading, sundries,

T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-

in-charge. ) required for the work complete in all respect excluding GST as directed by the

Engineer-in-charge.

24 Providing & Fixing of Anchor fasterner Nos 8 ₹ 23.60 ₹ 188.80

25 52 mm thick cement concrete flooring with concrete /VDF hardener topping, under layer 40 mm Sqm

thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound

mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of 36.81 ₹ 614.19 ₹ 22,608.33

cement slurry, vacuum dewatering process and finally finished by floating, brooming with wire

brushetc. complete as per specifications and directions of Engineer-incharge.but excluding the

cost of nosing of steps etc. complete in all respect excluding GST as directed by the Engineer- in-

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer using structural steel etc. as required.

26 In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever Kgs

required,all complete

27 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kgs 329.475 ₹ 143.09 ₹ 47,142.93

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per

manufacturer's specifications including appropriate priming coat, preparation of surface, etc.

29 On concrete work sqm 36.81 ₹ 228.81 ₹ 8,422.42

Providing and Placing in position suitable PVC water stops conforming to IS:12200 for

construction/ expansion joints between two RCC members and fixed to the reinforcement with

binding wire before pouring concrete etc. complete:

30 Dumb bell with central bulb (180 mm wide, 8 mm thick) Rmt 43.2 ₹ 260.67 ₹ 11,261.12

31 Providing and applying of swellable type water stop tape, 19 mm x 25 mm thick in linear metre Rmt

(expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining

walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After

cleaning the surface, one coat of required primer for swellable water stop tape shall be applied

throughout the length of the joint @3.78 litre per 240 running metre. Over the primed surface 43.2 ₹ 557.98 ₹ 24,104.87

swellable type water stop tape shall be placed. The work shall be carried out all complete as per

specification and the direction of the Engineer-In-Charge. The product performance shall carry

guarantee for 10 years against any leakage.

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks

1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) as per standard design :

32 With 20x20 mm square bar Each 22 ₹ 530.01 ₹ 11,660.18

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and

approved quality

33 Rectangular shape 600x450 mm internal dimensions Each 4 ₹ 1,398.87 ₹ 5,595.50

34 Filling in foundation and plinth with excavated materials including watering and ramming as Cum

directed by the Engineering-in -Charge.

35 Disposal of surplus excavated materials within the area specified & directed by BDA / EIC (all Cum

kinds of soil, boulders, concrete or any other excavated materials) including all lifts, spreading in

layers, breaking clods and leveling to disposal ground arranged by the contractor inclusive from

the site of excavation to the site of disposition(upto take 10 Km.) etc. complete in all respect 64.97215 ₹ 205.08 ₹ 13,324.75

excluding GST as directed by the Engineer- in- charge.

TOTAL COST OF CIVIL & FINISHES WORK ₹ 36,47,478.65

BASKETBALL AND BADMINTON COURT

A CIVIL & FINISHES WORK

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as

well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m

and lift upto 1.5 m, as directed by Engineer-incharge.

2 2.27 Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in

panel after preparing the subgrade as directed including all labour and materials and if necessary Cum 118.76 ₹ 2,066.41 ₹ 2,45,396.37

dewatering, complete.

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in

layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and

watering, lead up

to 50 m and lift upto 1.5 m.

3 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity

after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating

with road roller including making good the undulations etc. and re-rolling the sub grade and

disposal of surplus earthwith lead upto 50 metres.

Construction of granular sub-base by providing close graded Material conforming to

specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to

work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor

grader on prepared surface and compacting with vibratory power roller to achieve the desired

density, complete as per specifications and directions of Engineer-in-Charge.

4 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

5 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Digitally signed by JAYA

6 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to

0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with

water at OMC in

for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base

course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity

achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including

heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on

bitumen boiler,

cleaning and preparing the existing road surface as per specifications :.

8 16.30.2 On bituminous surface @ 0.50 Kg / sqm Sqmt 0.00 ₹ 46.90 ₹ 0.00

9 Providing and laying bituminous macadam using crushed stone aggregates of specified grading

premixed with bituminous binder, transported to site by tippers, laid over a previously prepared

with paver finisher equiped with electronic sensor to the required grade, level and alignment and

16.55.1 rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the Cum 23.75 ₹ 8,276.00 ₹ 1,96,563.22

desired compaction and density, complete as per specificatons and directions of Engineer-in-

Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50%

(percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH

10 Providing and laying Bituminous concrete using crushed stone aggregates of specified grading,

premixed with bituminous binder and filler, transporting the hot mix to work site by tippers,

laying with paver finisher equiped with electronic sensor to the required grade, level and

alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired

16.57.1 compaction and density as per Cum 23.75 ₹ 11,798.79 ₹ 2,80,233.12

specification, complete and as per directions of Engineer-in-Charge.40/50 mm compacted

thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime

filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-

120 TPH capacity.

Total DSR ₹ 12,96,220.00

11 8 LAYER ACRYLIC FLOORING SYSTEM:

Providing and laying 8-layer acrylic flooring system as per specifications mentioned below:

a) P/applying 2 layers of resurfacer

b) P/laying 3 layers of cushion

c) P/applying 3 layers of color coats as per specifications Sqm ₹ 2,359.76

d) All game lines marking to be done as per international standards.

ITF Preferred Certificate

Anti-Slip resistance Certification

ITF Classified - III

Outdoor Basketball Post ₹ 0.00

12 Supplying & Installation of Fixed Basketball Post 150mm SQ tube 3.2 M boom:

Fixed Basketball post with net outdoor model Made of 150 mm x 150 mm Sq tube with boom.

Board Frame: 40 mm x 40mm square tube structure with 12mm Toughen Glass 1800X1050X

(12 mm) mounted with the help of cross support.

Dunking ring: dunking rim with three spring mechanism. Die made, as per international standard.

As approved design

13 RA RCC peripheri Drainage Works Rmt 36.40 ₹ 18,502.70 ₹ 6,73,498.10

14 Factory finished safety sports fence system 4.5 Mtr High with Connector system Providing &

Fixing factory made safety chain link fencing with powder coated steel special connector ,it

includes 4.5 Mtr High ф 76 mm (OD) 2 mm thick MS pipes, Green powder coated factory

finished post vertical post with back support fixed with J foundation bolt reinforced concrete wall

at 4 mtr center to center distance, ф 60 mm (OD) 2 mm thick MS pipe HORIZANTAL post ,

Horizontal post should be factory finished Green powder coated PU Painted installed at Top and

Bottom location for 3 mtr Height and Top Middum and Bottom location for 4.5 mtr Height with

the help of special connectors. 2.4-2.5 mm thick PE coated galvanized steel chain link fence

fabric mesh of size 50 mm X 50 mm x 4 mtr , fixed to vertical post and three horizontal post

RA with the help of 3 mm thick extruded Aluminum flat with green powder coated PU Painted Sqm 450 ₹ 4,797.00 ₹ 21,58,647.75

finish and self-tapping screw. 3 mm thick special Connectors made from pressed steel and

powder coated finish for connecting Vertical and horizontal post by using M12 X 90 bolt at

every joint and corner of horizontal and vertical post without welded joints for easy installation

and removable. Complete, as per the direction of Engineer in charge. The safety fence system

should sustain impact of the ball, inner side of fence should be free from any projected

NON SOR AMOUNT 44,67,278.29

Total Amount for BASKETBALL AND BADMINTON COURT ₹ 57,63,498.29

Total Amount for BASKETBALL AND BADMINTON COURT ₹ 57,63,498.29

Digitally signed by JAYA

S. No. Description Student Hostels-11

I. DSR Items Plumbing Works

1.0 Plumbing & Fire Fighting DSR Items 21827.10

2.0 Total C/F to Summary 124177.65

3.0 Total C/F to Summary 2168388.95

Total of DSR Items Plumbing Works 2314393.70

II. Non-DSR Items Plumbing Works

7.0 Plumbing & Fire Fighting NDSR Items 1982378.89

8.0 Total C/F to Summary 4588736.00

9.0 Total C/F to Summary 3356602.00

Total of Non-DSR Items Plumbing Works 9927716.89

Total of DSR+Non-DSR Items Plumbing Works (INCL GST) 12242110.59

Digitally signed by JAYA

Reference/ DSR 2025 Hostel

S.No. Description Unit

I. Plumbing & Fire Fighting DSR Items

1.0 Sanitary Fixtures & CP Brass Fittings

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per

IS 13983 with C.I. brackets and stainless steel plug 40 mm including

painting of fittings and brackets, cutting and making good the walls

wherever required :

1.1 17.10.1.3 Kitchen sink with drain board 510x1040 mm, bowl depth 200mm. Each 7159.00 3 21477.00

17.28 Providing and fixing P.V.C. Waste pipe for sink or wash basin including

P.V.C. waste fittings complete.

2.1 17.28.1 Semi rigid pipe

Total C/F to Summary 21827.10

2.0 Soil, Waste, Vent & Rain Water Pipes

Providing and laying in position cement concrete of specified grade

3.0 4.1 excluding the cost of centring and shuttering. All work up to plinth.

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources :

3.1 4.1.3 4 graded stone aggregate 20 mm nominal size derived from natural

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet

1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement :

3 coarse sand) and a coat of neat cement, rounding the edges and

making and finishing the outlet complete. Each 298.25 17 5070.25

Providing and fixing to the inlet mouth of rain water pipe cast iron grating

15 cm diameter and weighing not less than 440 grams. Each 54.70 17 929.90

Total C/F to Summary 124177.65

3.0 Internal & External Water Supply System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m

6.0 18.8 spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of Engineer in

Concealed work including cutting chases and making good the walls

6.1 18.8.2 20 mm nominal outer dia .Pipes. Metre 537.60 1460 784896.00

6.2 18.8.3 25 mm nominal outer dia .Pipes. Metre 627.25 1025 642931.25

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, and all CPVC plain &

brass threaded fittings, including fixing the pipe with clamps at 1.00 m

spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of

Engineer in Charge.

Internal Work - Exposed on Wall

7.3 18.7.4 32 mm nominal outer dia .Pipes. Metre 518.75 50 25937.50

7.4 18.7.5 40 mm nominal outer dia .Pipes. Metre 702.95 100 70295.00

7.5 18.7.6 50 mm nominal outer dia .Pipes. Metre 934.15 70 65390.50

Digitally signed by JAYA

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having

thermal stability for hot & cold water supply including all CPVC plain &

brass threaded fittings This includes jointing of pipes & fittings with one

step CPVC solvent cement, trenching, refilling & testing of joints

complete as per direction of Engineer in Charge.

8.1 18.9.4 32 mm nominal dia .Pipes. Metre 438.60 100.00 43860.00

8.2 18.9.5 40 mm nominal dia .Pipes. Metre 563.05 50.00 28152.50

8.3 18.9.6 50 mm nominal dia .Pipes. Metre 794.25 20.00 15885.00

8.4 18.9.7 65 mm nominal dia .Pipes. Metre 1674.40 40.00 66976.00

Constructing masonry Chamber 30x30x50 cm inside, in brick work in

cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.

surface box 100x100 x75 mm (inside) with hinged cover fixed in

reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand

9.0 18.32 : 3 graded stone aggregate 20 mm nominal size), including necessary

excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10

graded stone aggregate 40 mm nominal size ) and inside plastering with

cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with

a floating coat of neat cement complete as per standard design.

With common burnt clay F.P.S.(non modular) bricks of class designation

Constructing masonry Chamber 60x60x75 cm inside, in brick work in

cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I.

surface box 100mm top diameter, 160 mm bottom diameter and 180 mm

deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c

10.0 18.33 necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine

sand : 10 graded stone aggregate 40 mm nominal size) and inside

plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm

thick, finished with a floating coat of neat cement complete as per

standard design :

With common burnt clay F.P.S.(non modular) bricks of class designation

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6

12.0 rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking

12A 18.48 arrangement and making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

Total C/F to Summary 2168388.95

II. Plumbing & Fire Fighting NDSR Items

9.0 Sanitary Fixtures & CP Brass Fittings

Providing & fixing White vitreous china water closet squatting pan

(Indian type) along with “S” or “P” trap including dismantling of old WC

seat and “S” or “P” trap at site complete with all operations including all

necessary materials, labour and disposal of dismantled material

i/c malba, all complete as per the direction of Engineer-in charge

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass

pillar taps, 32 mm C.P. brass waste of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever require:

White Vitreous China Wash basin size 630x450 mm with a pair of 15

mm C.P. brass pillar taps 2448.87 40 97954.80

Digitally signed by JAYA

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass

single hole basin mixer of approved quality and make, including painting

of fittings and brackets, cutting and making good the walls wherever

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm

CP Brass single hole

basin mixer Each 3960.55 40 158422.00

Providing and fixing 15mm C.P brass pillar faucet for Wash Basin

Including cutting and making good the walls wherever required .

Providing and fixing 15mm C.P. copper connecting pipe 450mm long

with C.P. brass nuts, washers complete in all respects.(Jaquar Cat No.

ALD 803AB or equvalant from approved make list)

Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with standard flush

pipe and C.P. brass spreaders with brass unions and G.I clamps

complete, including painting of fittings and brackets, cutting and making

good the walls and

floors wherever required :

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 6258.75 11 68846.25

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass

single hole basin mixer of approved quality and make, including painting

94.0 17.7 of fittings and brackets, cutting and making good the walls wherever

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm

CP Brass single hole basin mixer Each 3960.55 11 43566.05

Providing and fixing C.P. brass angle valve for basin mixer and geyser

points of approved quality conforming to IS:8931 Each 574.31 11 6317.41

Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with

99.0 NS-15 swinging spout complete. Including cutting and making good the walls

wherever required Each 7225.00 1 7225.00

600 mm long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 gms. Each 621.73 10 6217.30

Providing and fixing of C.P. brass Soap Dish list fixed with C.P. brass

screws complete in all respects (Hostels). Each 1173.00 19 22287.00

102.0 17.3 Providing and fixing toilet paper holder :

Providing and fixing liquid dispenser including all fittings complete

103.0 NS-19 Euronics Cat. No. ES 81A or equvalant from approved make list,

Including cutting and making good the walls wherever required Each 3946.00 19 74974.00

Providing and fixing Swing Handicap Grab Bar,Including cutting and

making good the walls wherever required Each 6194.00 6 37164.00

Providing and fixing Stainless Steel Matt Finish-304, Recessed wall

mounted Water Cooling Unit, 2 Nos. Fountain Bubblers,1 No. Bottle

106.0 NS-22 Filler, suitable for single Phase Power Supply,60LPH Water Chilling Unit

with 20 LPH WaterHeating Unit size-1040x1507x450 mm. and wire up to

socket, 3 pin plug etc complete in all respect Each 158671.00 5 793355.00

107.0 NS-23 Providing and Fixing of C.P. Brass Shower set comprising of :

One No. CP brass Concealed Shower Mixer Diverter

One No. CP brass OH shower head & Shower Arm

One No. CP brass Bath Spout

Including cutting and making good the walls wherever required.

Shower set as described above Each 10245.00 40 409800.00

Digitally signed by JAYA

Providing and fixing Wall Mounted Stainless Steel Cloth Hanger ( 8

Hooks) including all fittings complete in all respect. Each 395.00 40 15800.00

Providing and fixing vertical storage type hot water heater fixed to wall

with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm

111.0 CP brass non-return valve complete including making connections with

15mm dia CP connecting pipes on inlet and outlet, suitable length of

power cable and 15 amps plug.

111.1 NS-26A Capacity 25 Litres Venus Model 25GV. Each 10495.00 9 94455.00

Total C/F to Summary 1982378.89

10.0 Soil, Waste, Vent & Rain Water Pipes

Providing and fixing sound insulated Polyproplene Piping System with

3 layer pipe,colour, push-fit type, food safe, high impact and stiffness as

per ON EN 1451-1 and DIN 19560 offering sound levels of not more

than 21 dBA at a flow rate of 4 l/s and having pipe ring stiffness as per

1S0 / DIS 9969 and tightness as per EN 1277 / B and C and DIN 19560,

with all necessary fittings in blue colour as per ON EN 1451-1 and DIN

19560 all fitted with factory fitted lip ring.

Providing and fixing Polyproplelene (PP) P-Trap including setting with

cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 hand stone ballast

20 MM nominal size) the inlet from floor level to trap rim to be grouted

and cemented neat manner including cutting and making good the floor

& wall wherever required complete in all respects

113.1 NS-32 110 mm inlet and 110 mm outlet Each 1476.00 2 2952.00

Providing and fixing 110 OD x 600mm PP fitting with 2 & 3 nos. PP.

114.0 Socket 32 & 40 and 50mm rodding eye complete in all respect.

Providing and fixing PP Cleanout Plug fixed to PP Pipe complete in all

115.0 complete including cutting and making good the walls and floor

wherever required

Providing and fixing uPVC agricultural pipes conforming to IS:4985 (6

kg/sqcm) including all fittings, e.g. couplings, tees, bends, reducers and

116.0 screwed adoptors jointing with solvent cement joint as per

manufacturers' recommendations. [for Rain Water Pipes]

Providing and fixing of GI clamps with EPDM rubber lining Zinc plated

for support of vertical soil, waste, vent and rain water pipes, embedded

in walls with anchor fastner etc. including cost of cutting holes and

making good the walls complete in all respects.

Providing and fixing in position 110x63 mm OD PP reducing elbow

including fix to floor with cement mortar. Each 466.00 130 60580.00

Digitally signed by JAYA

Providing and fixing in position 127x127 mm stainless steel grating

119.0 NS-43 Chilly Cat. No. SK-SFFCL-127 for floor trap/floor drain including fix to

floor with cement mortar. Each 441.00 271 119511.00

Providing and fixing in position stainless steel Cockroach Trap with

120.0 NS-44 grating Chilly Cat. No. CCT-SGFC-127 for floor trap/floor drain including

fix to floor with cement mortar. Each 979.00 1 979.00

Providing & Fixing of Multi Trap Hight Adjustment Extension Piece

110 x 150mm long upto floor level complete. Each 502.00 4 2008.00

Providing & Fixing of Multi Floor Trap High Riser 110 x 75 x 50 mm.

Providing and fixing in position 110x63 mm dia uPVC Balcony Drain

including fix to floor with cement mortar. Each 278.00 88 24464.00

Total C/F to Summary 4588736.00

11.0 Internal & External Water Supply System

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.

Internal Work - Exposed on Wall

132.1 NS-61 65 mm nominal outer dia .Pipes. Sch-40 Metre 1101.00 485 533985.00

132.2 NS-62 80 mm nominal outer dia .Pipes. Sch-40 Metre 1419.00 25 35475.00

Providing and fixing Stainless Steel pipes confirming to EN 10312

(S.S.Grade-316) complete with Press Type fittings suitable for doubley

secure pressing (two pressings simultaneously– one in front of the crimp

and one behind it) for torsion proof and longtitudinally forcelocked

connection with Black EPDM Sealing Element with SC-Contur in

accordance with DVGW regulation W534, DW 8501 BL 0551, DW 8511

133.0 BQ 0245) for Hot and Cold water supply capable to withstand temprature

up to 110 degree centrigrade and working pressure 16 bar, such as

sockets, bends, elbows, tees, reducers, unions,Flanges etc. necessary

adapters for GI/Copper and CP fittings. Clamps with hanger at a spacing

as required , including cost of cutting holes in wall and making good the

same in cement mortar 1 : 2 (1 cement : 2 coarse sand) including testing

of joints complete as per direction of Engineer-in-charge.

133.1 NS-63 15 mm OD x1.0 mm Thick Pipe Metre 1323.00 65 85995.00

133.2 NS-64 22 mm OD x1.2 mm Thick Pipe Metre 2055.00 5 10275.00

133.3 NS-65 28 mm OD x1.2 mm Thick Pipe Metre 2631.00 10 26310.00

133.4 NS-66 35 mm OD x 1.5 mm Thick Pipe Metre 3095.00 30 92850.00

Providing and fixing forged brass ball valve of brass body with hard

134.0 chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome

plated centre handle with female BSP threads complete in all respects.

134.1 NS-67 20 mm nominal bore Each 621.00 104 64584.00

134.2 NS-68 25 mm nominal bore Each 980.00 97 95060.00

134.3 NS-69 32 mm nominal bore Each 1607.00 40 64280.00

134.4 NS-70 40 mm nominal bore Each 2315.00 22 50930.00

134.5 NS-71 50 mm nominal bore Each 3288.00 20 65760.00

Providing and fixing Thermoflex or Kaiflex thermal insulation tubing a

elastomeric flexible material having hermetic blister closed cell structure

of expanded synthetic rubber over pipes of following nominal bores and

thickness including all required accessories complete as per

6 mm thick (Concealed Pipes)

135.1 NS-72 For 20 mm dia Pipe Metre 109.00 460 50140.00

135.2 NS-73 For 25 mm dia Pipe Metre 145.00 510 73950.00

Digitally signed by JAYA

Providing and fixing Thermoflex or Kaiflex thermal insulation tubing, a

elastomeric flexible material having hermetic blister closed cell structure

of expanded synthetic rubber over pipes of following nominal bores and

thickness including protection by wrapping with 24 gauge alumminium

sheet with riveted screw joints all required accessories complete as per

13 mm thick (Exposed at Shafts & Terrace)

136.1 NS-74 For 20 mm dia Pipe Metre 136.00 410 55760.00

136.2 NS-75 For 25 mm dia Pipe Metre 175.00 365 63875.00

136.3 NS-76 For 32 mm dia Pipe Metre 191.00 200 38200.00

136.4 NS-77 For 40 mm dia Pipe Metre 230.00 450 103500.00

136.5 NS-78 For 50 mm dia Pipe Metre 287.00 255 73185.00

136.6 NS-79 For 65 mm dia Pipe Metre 315.00 5 1575.00

Providing and fixing forged brass single acting air release valve with

screwed inlet 25 mm dia. Each 1134.00 2 2268.00

Providing and fixing of Single phase electrical actuator operated wafer

type rubber lined butterfly valve with by pass arrangement as per

drawing attached including level controller, 3 nos. normal butter fly

valves,necessary control and Power cables ( Maximum 10 M. Length of

each type) and control panel installed on OH tank filling line near the

tanks complete in all respects.

Providing and fixing threaded end brass digital water meter complete in

Supply, installing, testing and commissining of fixed speed

hydropneumatic system mounted on a common base plate comprising of

vertical inline multistage pumping set with Stainless steel-304 body,

Stainless steel-304 impeller, Stainless steel-304 casing, shaft of

Stainless steel-316 and C.I. base & head with mechanical seal, shaft

directly coupled to a TEFC induction motor suitable for 400/440 volts, 3

phase, 50 cycles AC supply with 150 mm dia pressure gauge with

gunmetal isolation cock, vibration eliminating pads under foundation, dry

running Protection,motor control centre, necessary power and control

cabling from MCC to pumps including required rating of MCB, one No.

60 litre capacity M.S diaphragam tank with interchangeable butyl rubber

membrane,dual type pressure switch, complete in all respects including

suction and delivery headers of Stainless steel-316 grade pipe of

required dia, isolation valves, NRV of PN-25 grade & vibration

eliminators on both suction & delivery side of pumps,power box,

equipped with fuses/ isolators/circuit breakers as required.

140.1 NS-87 For Domestic Water Supply at Hostel Terrace Level

Set of Two Pump (1 Working + Standby )

Capacity - 2.0 LPS

Head - 20.0 M.

Supplying, installation, testing and commissioning of skid mounted fully

automatic Reverse Osmosis System of output capacity 50 litres / hour

designed at a minimum Flux at inlet complete as required with the

following items:

Garnet Filter (GF) - 1 No.

Media for GF - 1 LOT

Antiscalant Dosing System with level sensors - 1 Lot

Cartridge Filter - 1 No.

High pressure pump - 2 Nos (1W + 1St).

R.O. Block - 1 No.

Membranes - As per manufacturer design

Pressure Tubes - 1 No.

Digitally signed by JAYA

RO skid - 1 No.

pH correction system - 1 No.

Necessary instruments - 1 Lot

Interconnecting pipe with necessary valve work - 1 Lot

PVC (upto HP Pump) - 1 Lot

SS (HP Pump to Membrane) - 1 Lot

Pressure gauges - 5 Nos.

Rotameter - 2 Nos.

PPLC cum instrument panel - 1 No.

Conductivity Indicator - 1 No.

Level sensors (Antiscalent Tank) - H/L

Level sensors (Permeate Tank) - H/L

Solenoid Valve (Inlet) to R.O. tank - 1 No.

Solenoid Valve (Reject) - 1 No.

The reverse osmosis block shall be duly supplemented with adequate

pretreatment and post treatment equipmnet such as filter sodium

metabisulphate dosing, anti-scalant dosing and post RO treatment pH

correction dosing etc. in line with the raw water characteristics and the

required treated water parameters. The plant should consist of the

following automation:

The plant starts when the level at R.O. water storage tank is low and

stops when the level at R.O. water storage tank is high.

When the level is low, the raw water pump starts. High pressure pumps

starts after two minutes of starting of raw water pump.

The reject valve closes after 1 minute of starting of high pressure pump.

If the pressure at high pressure pumps suction is low / high, the plant

When the plant stops due to high level, first the high pressure pump

stops and the dump valves opens, after two minutes the raw water

pumps and dosing pump stops.

When the connectivity is high an alarm is given.

The MIMIC provides indications for all the I/Ps and the respective O/Ps.

R.O. plant as described above Set 150633.00 1 150633.00

Supply, installation, testing and commissioning of stainless steel R.O

water storage tank (SS 316) with minimum thickness of shell is 3 mm

and base is 3 mm placed at terrace level with inlet, outlet, overflow

143.0 connection complete with 25 mm dia bend for vent, ball valve for scour,

mosquito proof brass overflow grating and 450 mm dia manhole cover

with locable arrangment completeas per direction of Project Manager.

143.1 NS-91 1500 Litres Capacity Each 198837.00 0 0.00

143.2 NS-92 500 Litres Capacity Each 75317.00 2 150634.00

Supply, installation , testing & commissioning of Micro Processor

144.0 NS-93 Controlled air cooled Heat pump delivering actual capacity as per the

following parameters duly installed at site.

Heat pumps shall be rated at 1.26 KW of input power and 5.4 KW of

output power. Refrigerant used should be environment friendly R-410a.

Heat pump should heat water upto 55⁰C on heat pump mode. It shall

have silent operation and the sound level should not exceed 65 dB.

R-410a (Refrigerant)

Heat Pump as described above

Nominal Input Power - 1.26 KW

Output Heating capacity - 5.4 kW

Heat pump shall have LCD display control panel with built in diagnostic

and troubleshooting information

Heat pump should have an inbuilt cycle for defrosting in case icing

occurs on evaporator.

Digitally signed by JAYA

with inbuilt tube in tube type heat exchanger.

All other mounting ,fitting and controls

Suitable for electric supply of 220 +/- 10 % volts & 1N~ 50 hz

All interconnecing wiring/cabling between heat pump and electric panel

& control valves, NRV, Piping etc complete.

The heat pump shall have an in-built facility to start /stop depending on

variation in demand at different periods. Each 150633.00 2 301266.00

Design, Supply, installation, testing & commissioning of SS 316L

horizontal hot water storage tank with 3 mm thicness suitable for

minimum 5 Kg /Sqm working pressure. Tank shall be provided with

water flow meter at inlet (approved by department of weights and

148.0 measures), inlet / outlet, overflow / drain connection with MH cover 6

mm thick SS tank, pressure relief valves, pressure gauge at inlet / outlet

with isolation cock, thermometer at inlet / outlet. All the valves &

accessories shall be suitable for an operating pressure of 5 Kg/sq.cm.

Tank shall be insulated with 100 mm thick glass wool / rock wool

insulation 80 kg/m2 density, including 24 gauge aluminium cladding.

Tank shall provided with 15 mm dia testing spout with valve (inlet

temperature to hot water storage tank 60-65 deg.C). The flanges shall

be machined from SS-316 sheets with dimensions confirming to ANSI, B

16.5 No. 150. The nozzles shall be SS pipes. (Tank shall be fabricated

as per unfired pressure vessel code IS 2825-1969, IS 226 / IS 2062).

148.3 NS-99 2000 Litres Capacity Each 283191.00 2 566382.00

Supply, installation , testing & commissioning of following pumps

suitable for 415 Volts connected with T.E.F.C. induction motor,

M.S.channel, base plate complete with vibration isolators, isolating

valve on suction and discharge, non return valve on discharge,

pressure gauges with stop cock and dial type thermometer on suction

149.0 or discharge. The pump shall have mechanical seal. The pump shall

be SS casing, impeller, shaft and CI (Epoxy coated) base & EPDM

Mechanical seal (suitable for hot water temperature up to 85 deg C.)

including Valves, NRV, Strainers, Pressure Gauge, Thermometer &

Cabling etc. complet in all respects.

Hot Water Circulation & Recirculation Pumps in Heat pump and

tank. (For 19 KW Heat Pump)

Pump (2 Nos. 1W+1SB)

Flow - 3.6 m3/hr

Hot Water Recirculation Pumps in Heat pump and tank. (For 19 KW

Pump (2 Nos. 1W+1SB)

Flow - 3.6 m3/hr

Total C/F to Summary 3356602.00

Digitally signed by JAYA

Electrical BOQ Summary

S. No. Description DSR &MR

1 SUB HEAD-1 (INTERNAL) ₹ 1,00,51,930.00

2 SUB HEAD -2 (DISTRIBUTION BOARD) ₹ 8,33,969.00

3 SUB HEAD -3 (EARTHING) ₹ 6,99,804.00

4 SUB HEAD -4 (MV CABLE) ₹ 42,70,823.00

5 SUB HEAD -5 (CABLE TRAY & RACEWAY) ₹ 9,76,603.00

6 SUB HEAD -6 (ELECTRICAL ITEMS) ₹ 5,94,006.55

7 SUB HEAD -7 (FIRE ALARM SYSTEM & PUBLIC ADDRESSABLE) ₹ 17,25,690.00

8 SUB HEAD -8 (INTERNAL LIGHT FIXTURE) ₹ 10,89,536.00

10 SUB HEAD -10 (LIGHTNING PROTECTION) ₹ 4,32,766.00

11 SUB HEAD -11 (EXTRA LOW VOLTAGE) ₹ 10,69,214.00

12 SUB HEAD -12 (EXTENAL LIGHT FIXTURE) ₹ 1,09,710.00

13 SUB HEAD -13 (HT CABLE) ₹ 1,28,678.00

14 SUB HEAD -14 (MV PANELS) ₹ 15,92,622.00

15 SUB HEAD -15 (HV SUBSTATION) ₹ 12,79,952.00

16 SUB HEAD -16 (DG Set) ₹ 18,71,541.00

17 TOTAL (INCL GST) ₹ 2,73,26,313.55

Digitally signed by JAYA

DSR 2025/ NS Item DSR 2025 RATE

S. No. DESCRIPTION UNIT Qty Amount in Rs.

SUB HEAD-1 (INTERNAL)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC

insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with

1 DSR-2025 - 1.10 modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC

insulated copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in

2 DSR-2025-1.54 surface/ recessed steel conduit, and earthing the

point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

3 DSR-2025 - 1.31 including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections Each 500 ₹ 545.00 ₹ 2,72,500.00

etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core

4 DSR-2025 - 1.12 cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated Mtr. 7990 ₹ 373.00 ₹ 29,80,270.00

copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core

5 DSR-2025 - 1.13 cable in surface/ recessed medium class PVC conduit along with 2 Nos. 4 sq. mm FRLS/HFFR PVC Mtr. 6000 ₹ 587.00 ₹ 35,22,000.00

insulated copper conductor single core cable for loop earthing as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess

6 DSR-2025 - 1.57 including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including Each 16 ₹ 807.00 ₹ 12,912.00

connections, painting etc. as required. (AC)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

7 DSR-2025-1.32 including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, Each 148 ₹ 659.00 ₹ 97,532.00

connections etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC

8 DSR-2025 - 1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

9.00 DSR-2025- 1.21 surface/recess including cutting the wall and making good the same in case of recessed conduit as

Supplying & fixing following size / modules, GI box along with modular base & cover plate for modular

switches in recess as required.

Supplying and Fixing following modular switch / socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

11.01 DSR-2025 - 1.24.7 For TV antenna socket outlet Each 8 ₹ 168.00 ₹ 1,344.00

Supplying and drawing co-axial TV cable RG-6 garde, 0.7 mm solid copper conductor PE insulated, shieled

12 DSR-2025- 1.19 with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC Mtr. 441 ₹ 54.00 ₹ 23,814.00

conduit as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing

13 DSR-2025- 28.5.3 surface / recessed steel conduit of following pairs, cores and size including connections and

interconnections etc. as required.

speaker cable Single pair, 2-core, 1.5 sqmm

Supplying and fixing 25mm dai MS flexible pipe with PVC coating along with accessories like coupler etc.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,

bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in

15 DSR-2025- 15.16 ground (75 cm below ground level) including excavation and refilling the trench but excluding sand

cushioning and protective covering etc., complete as required.

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC

16 DSR-2025- 15.14 collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and

refilling etc as required.

TOTAL SUBHEAD-1 ₹ 1,00,51,930.00

SUB HEAD -2 (DISTRIBUTION BOARD)

Supplying and fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution

board, 415 volts, on surface/recess, complete with tinned copperbusbar, neutral bus bar, earth bar, din

1 DSR-2025 - 2.4 bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing of following ways surface/recess mounting, vertical type, 415V, TPN MCB

distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A, tinted coppe

2 DSR-2025 - 2.5 busbar, common neutral link, earth bar, din bar for mounting MCBs (But without MCB and incomer) as

required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Digitally signed by JAYA

Supplying and Fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,

on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including aerthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' curve, miniature circuit breaker suitable

4 DSR-2025 - 2.10 for inductive load of following poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

4.03 DSR-2025 - 2.10.5 Tripple pole neutral Each 34 ₹ 1,301.00 ₹ 44,234.00

Supplying and fixing following rating, double pole, (single phasenand neutral), 240 V, residual current

5 DSR-2025 - 2.14 circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying & fixing single pole blanking plate in the existing MCB DB complete etc. as required.

TOTAL SUBHEAD-2 ₹ 8,33,969.00

SUB HEAD -3 (EARTHING)

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing

1 DSR-2025 - 5.4 masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long Set 10 ₹ 8,351.00 ₹ 83,510.00

etc. with charcoal/coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing

2 DSR-2025-5.6 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. Set 4 ₹ 15,004.00 ₹ 60,016.00

with charcoal/ coke and salt as required.

Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including

3 DSR-2025 - 5.11 connection with G.I. nut,bolt,spring,washer excavation and re-filling etc. as required. Mtr. 40 ₹ 755.00 ₹ 30,200.00

Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including

5 DSR-2025 - 5.10 connection with brass nut , bolt , spring , washer excavation and re-filling etc. as required. Mtr. 16 ₹ 1,638.00 ₹ 26,208.00

Providing and fixing 25 mm x 5 mm copper. strip on surface or in recess for connections etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode,

including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be

done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode,

including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done

by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing

surface / recessed conduit / submain wiring/cable as required.

TOTAL SUBHEAD-3 ₹ 6,99,804.00

SUB HEAD -4 (MV CABLE)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following

1 DSR-2025-10.1 size direct in ground including excavation, sand cushioning, protective covering and refilling the trench

etc as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size direct in ground in the same trench in one tier horizontal formation including excavation,

sand cushioning, protective covering and refilling the

trench etc as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of

following size on cable tray as required.

3.01 10.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr 600 ₹ 53.00 ₹ 31,800.00

3.02 10.8.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) Mtr 40 ₹ 109.00 ₹ 4,360.00

3.03 10.8.3 Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) Mtrs 40 ₹ 138.00 ₹ 5,520.00

3.04 10.8.4 Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) Mtrs 40 ₹ 226.00 ₹ 9,040.00

Supplying and making end termination with brass compression gland and aluminium lugs for following

4 DSR-2025-11.1 size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100Volt grade, 1 core/2

5 NS-2 core/3½core/4 core ISI marked with alu. stranded /solid

Digitally signed by JAYA

Supply of XLPE insulated FRLS heavy duty power cable conforming IS-7098

6 NS-3 (Part-1) 1988, 1100 Volt grade, 2/3/4/8/10/12 core ISI marked with copper stranded/solid conductor.

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing

7 DSR-2025-11.4 materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

TOTAL SUBHEAD-4 ₹ 42,70,823.00

SUB HEAD -5 (CABLE TRAY & RACEWAY)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with

perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the

ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

1.01 4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 520 ₹ 686.00 ₹ 3,56,720.00

1.02 4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 115 ₹ 866.00 ₹ 99,590.00

1.03 4.1.6 450 mm width X 50 mm depth X 2.0 mm thickness Metre 35 ₹ 1,243.00 ₹ 43,505.00

1.04 4.1.15 750 mm width X 75 mm depth X 2.0 mm thickness Metre 80 ₹ 1,844.00 ₹ 1,47,520.00

Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends

2 DSR-2025-4.2 with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S.

suspenders including bolts & nuts, painting suspenders etc as required

2.01 4.2.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 10 ₹ 1,105.00 ₹ 11,050.00

2.02 4.2.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 10 ₹ 1,544.00 ₹ 15,440.00

2.03 4.2.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 10 ₹ 2,437.00 ₹ 24,370.00

2.04 4.2.15 750 mm width X 75 mm depth X 2.0 mm thickness Each 10 ₹ 3,895.00 ₹ 38,950.00

Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee

with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S.

suspenders including bolts & nuts, painting

suspenders etc as required

3.01 4.3.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 10 ₹ 1,281.00 ₹ 12,810.00

3.02 4.3.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 10 ₹ 1,826.00 ₹ 18,260.00

3.03 4.3.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 5 ₹ 2,923.00 ₹ 14,615.00

3.04 4.3.15 750 mm width X 75 mm depth X 2.0 mm thickness Each 5 ₹ 4,691.00 ₹ 23,455.00

Supplying and installing following size of perforated painted with powder coating M.S. cable trays

Reducer with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with

M.S. suspenders including bolts & nuts, painting

suspenders etc as required

4.01 4.5.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 10 ₹ 1,281.00 ₹ 12,810.00

4.02 4.5.4 300 mm width X 50 mm depth X 1.6 mm thickness Each 12 ₹ 1,876.00 ₹ 22,512.00

4.03 4.5.6 450 mm width X 50 mm depth X 2.0 mm thickness Each 4 ₹ 2,933.00 ₹ 11,732.00

4.04 4.5.15 750 mm width X 75 mm depth X 2.0 mm thickness Each 4 ₹ 4,691.00 ₹ 18,764.00

Supply Installation, testing and Commissioning of following size Overhead Galvanized Raceway including

suspening rods, supports etc.

5.01 a) 200X80X1.6 mm thick with one compartment Mtr 35 ₹ 1,200.00 ₹ 42,000.00

5.02 b) 300X80X1.6 mm thick with one compartment Mtr 15 ₹ 1,500.00 ₹ 22,500.00

5.03 c) 150X80X1.6 mm thick with one compartment Mtr 50 ₹ 800.00 ₹ 40,000.00

TOTAL SUBHEAD-5 ₹ 9,76,603.00

SUB HEAD -6 (ELECTRICAL ITEMS)

Providing & Fixing of Circular / hexagonal MS sheet box for ceiling fan clamp of internal dia. 140 mm, 73

mm height , top lid of 1.5 mm thick of MS sheet with its top surface hacked for proper bonding, top lid

shall be screwed to the MS sheet box by mens of 3.3 mm dia. round headed screws one lock at the

1 DSR Civil 10.18 corners. Clamps shall be made of 12 mm dia. MS bar bent to shape as per standard drawing Each 189 ₹ 142.95 ₹ 27,017.55

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos.

canopies, shackle kit, safety rope, copper winding, steel/Al body

Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per

IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for

2 DSR-2025- 19.2 speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75

0C (max.), insulation resistance more than 2

mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c

external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and

earthing etc. as required.

2 19.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 189 ₹ 2,695.00 ₹ 5,09,355.00

Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including

painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm

or less shall be ignored)

Installation of exhaust fan in the existing opening, including making good the damage, connection,

4 DSR-2025-1.50 testing, commissioning etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed

plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained

metal cover for the socket outlet and complete with connections, testing and commissioning etc. as

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed

plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained

metal cover for the socket out let and complete with connections, testing and commissioning etc. as

Digitally signed by JAYA

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there

7 DSR-2025- 10.10 on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as Each 20 ₹ 598.00 ₹ 11,960.00

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm

8 DSR-2025-2.21 thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as Each 10 ₹ 315.00 ₹ 3,150.00

TOTAL SUBHEAD-5 ₹ 5,94,006.55

SUB HEAD -7 (FIRE ALARM SYSTEM & PUBLIC ADDRESSABLE)

Supplying, installation, testing and commissioning of micro processor based intelligent addressable main

fire alarm panel, central processing unit with the following loop modules and capable of supporting not

less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2

km, network communication card, minimum 320 character graphics/ LCD display with touch screen or

other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply

unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic

charger. The panel shall have facility to connect printer to printout log and facility to have seamless

integration with analog/digital voice evacuation system (which is part of the schedule of work under SH:

PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system

with open protocol BACnet/ Modbus over IP complete as per specifications

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of

rise cum fixed temperature thermistor complete with base as required

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector

complete with mounting base complete as required.

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder

complete as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of addressable phone control module complete as

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of addressable strobe complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying, installation, testing & commissioning of intelligent interface unit BACnet/ Modbus protocol i.e.

11 28.2.18 supplying communication links between building management system and fire alarm control panel Each 1 ₹ 1,96,207.00 ₹ 1,96,207.00

complete as required.

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper

13 DSR-2025- 28.5.2 conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as require Mtr. 700 ₹ 192.00 ₹ 1,34,400.00

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player

14 DSR-2025- 28.3.1 (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for Each 1 ₹ 1,32,115.00 ₹ 1,32,115.00

voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at

240 Volt AC Supply complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone

assembly complete as required.

TOTAL SUBHEAD-7 ₹ 17,25,690.00

SUB HEAD -8 (INTERNAL LIGHT FIXTURE)

Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round

/square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and

construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range - 15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.

F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %),life

time (LED,Driver & electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial

Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K

/ 5700°K / 6000°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <3,

Maximum power consumption should not more than the specified rating and Fixture shall be of

relevant BIS standard and

1 DSR-2025-1.3 trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on

housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures.

complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor

single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen

efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for

LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-

Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED

temperature shall not rise above 90°C)

Powder coated die cast / Extruded aluminum Body including trim.

Digitally signed by JAYA

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and

construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating

voltage AC 140 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade,

internal surge protection of 2.5 KV with Short & Open circuit protection,THD < 10% , P. F.≥0.95, IP20, CRI

>80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver &

electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life

ends ,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation

Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall

be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm

FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5

year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from

for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as

approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum

housing such that LED junction temperature shall not rise above 90°C)

Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body

material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver

efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range 15 deg to 40

deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.

F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical

of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT

3000°K / 4000°K / 5700°K /6000°K/ 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color

<3, Maximum power consumption should not more than the specified rating and Fixture shall be of

relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all

testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS,

PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year

OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL

lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be

as approved by Engineer

in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED

junction temperature shall not rise above 90°C).

TOTAL SUBHEAD-8 ₹ 10,89,536.00

SUB HEAD -9 (UPS)

Supplying, installation, Testing & Commissioning of of following capacity at full load (Unity Power Factor)

at operating temperature 0 to 40 deg C, Relative humidity 0 to 95%, Online double conversion true sine

Uninterrupted hot swappable (allow for the replacement or addition of battery modules without shutting

down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total

number of moduels requird for rated capacity). The UPS shall include a Rectifier, inverter, battery bank

suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS

rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass

switch alongwith provision for manual bypass, suitable isolation transformer for additional protection

against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered

are to be of the latest

technology with Digital Control Microprocessor based for reliable operation using Insulated Gate Bipolar

Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The

1 DSR-2025-5.2 quality of design, manufacturing and inspection process should confirm to the relevant Inter national

standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96% while

operating on battery mode and delivering quality power to the 100% non-linear loads. Current total

effect(ITHD) on the input grid shall be < 5% at 50 %load. (The required LC ( inductor (L) and a capacitor

(C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power

factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1

), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be

suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415

Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output.Non condensing, noise

level less than 60db at 1 meter distance, protections: Input Under voltage over voltage, abnormal out

voltage, battery over

charging, output over current, short circuit protection, battery deep discharge protection, 10KV surge.

UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204

1.01 DSR-2025-5.2.4 40KVA (Each Power module shall be < 10 KVA) Each 1 ₹ 5,99,469.00 ₹ 5,99,469.00

TOTAL SUBHEAD-9 ₹ 5,99,469.00

SUB HEAD -10 (LIGHTNING PROTECTION)

DSR-6 Lightning Protection System

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having

1 DSR-6.1 single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Nos. 2 ₹ 609.00 ₹ 1,218.00

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor

2 DSR-6.7 complete as required.(For horizontal run) Meter 200 ₹ 238.00 ₹ 47,600.00

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor

3 DSR-6.9 complete as required.(For vertical run) Nos. 312 ₹ 209.00 ₹ 65,208.00

SITC of T connector for connecting of 8 mm Al round conductor. The connector should be of SS 304 with

4 NS-E-48 SS nuts and bolt. Nos. 30 ₹ 600.00 ₹ 18,000.00

SITC of Cross connector for connecting of 8 mm Al round conductor.The connector should be of SS 304

with SS nuts and bolt.

Digitally signed by JAYA

SITC of Expansion piece along with connector to compensate the expansion of round 8 mm Al conductor

6 NS-E-50 when temperature variation. The connection should be in every 20 mtr Nos. 2 ₹ 1,200.00 ₹ 2,400.00

SITC of Straight connector for connecting of 8 mm Al round conductor. The connector should be of SS 304

with SS nuts and bolt

8 NS-E-52 SITC of GLUE- Glue is used to fix roof conductor holder on roof. Nos. 26 ₹ 1,200.00 ₹ 31,200.00

SITC of 8 mm round aluminium conductor as a down conductor mounted in the surface of wall which will

9 NS-E-53 carry the lightning current to earth pit. Meter 264 ₹ 80.00 ₹ 21,120.00

SITC of 08 mm round aluminium conductor as a down conductor mounted in the surface of wall which

10 NS-E-54 will carry the lightning current to earth pit. Nos. 264 ₹ 80.00 ₹ 21,120.00

SITC of Lightning Strike Recorder - 7 digits electromechanical display to record the lightning current in an

IP 67 enclosure with the minimum sensitivity of 1500A & maximum capacity of 220 KA (8/20 micro

11 NS-E-55 second waveform). The recorder is of non-resettable type with the electro-mechanical display. • LCD Nos. 8 ₹ 4,000.00 ₹ 32,000.00

screen is not permitted as it may depend upon the battery life to energize the LCD.

SITC of Test Joint Point for 25X3MM CU STRIP, the size should be 25 x 3 x 150 mm copper in ABS boxes.

SITC of advanced chemical gel earthing system of 01 number of UL listed & CPRI Tested copper bonded

earth electrode along with 25 Kgs of JK Reslow grounding minerals u clamp. Earthing Electrode

• Technology - Copper Bonded Steel Rod

• Length of the electrode = 3000 mm / 3 mtrs

• Rod dia = 17.2 mm

• Copper bonding thickness = 250 microns

• Certification – UL

13 NS-E-57 • CPRI Certification - Tested & certified for 46 KA Nos. 11 ₹ 6,500.00 ₹ 71,500.00

• ISO 9001:2015 certified manufacturer

• ISO 14001:2015certified manufacturer

• UL (USA) listed manufacturer

• 10MM Copper Bonded Conductor for earthing inter connection.

TOTAL SUBHEAD-10 ₹ 4,32,766.00

SUB HEAD -11 (EXTRA LOW VOLTAGE)

Supplying, installation, Testing and commissioning of following capacity 24 port Layer 3 Network Switch

having features and specifications etc. as mentioned here under: At least 20 X RJ-45 Gigabit Ethernet

Ports and additional 4 combo 10/100/1000 base-t/SFP Ports

with additional 4 SFP+ ports non-blocking architecture by having Switching capacity of min. 128Gbps and

packet forwarding rate of 95Mpps or higher, 16K MAC table. Console Port, USB port, Internal AC Power

supply with operating temperature of 0 to +50 0C. Stacking port with stacking support of minimum 8

units per stack. 48K Mac address, 9K or more Jumbo frame, ERPS with enabling ring to converge in less

than 50 ms from node or link failure, Static routing, Static, 6to4, ISATAP and GRE, IPv6 Neighbor Discovery

(ND), BGP, ISIS, MPLS, VRRP v2, OSPFv2/v3, PBR, Route Redistribution, RIPv1/v2/ng, IP Helper all L3

Protocols should support from day 1 for both IPv6 and IPv4, 802.1x, Port security , Radius

2 DSR -39.4 C TACACS+ authentication C accounting, DAD, DAI, DoS attack prevention, SSH, Guest VLAN, IP Access Each 1 ₹ 1,93,791.00 ₹ 1,93,791.00

List, MAC Access List. Multicast: VLAN, PIM-SM, PIM DM, PIM- SDM, PIM-SMv6, DVMRP v3 and MSDP,

IGMP C MLD Snooping, Flow mirroring, IGMP C MLD

Snooping Ǫuerier, Per-VLAN IGMP C MLD Snooping. SNMP, Dual configurations, Multiple images, RMON,

LLDP/LLDP-MED, sFlow, DHCP/BOOTP Client, IPv4/IPv6, Syslog server, Debug command, 802.3ah

Ethernet Link OAM, 802.1ag Connectivity Fault, Y.1731 OAM, 802.1Ǫbb Priority- based Flow Control

(PFC), Dying Gasp, Cable Diagnostics , 6 kV surge protection on all Gigabit Ethernet ports and on all GE RJ-

45 access ports. Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom

Portal of Department of Telecommunication, Government of India etc. complete as required.

Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches.

Must be hot Pluggable, RoHS Complaint, etc. complete as required.

3.01 39.6.1 1G SFP Single Mode/Multi Mode Each 4 ₹ 4,221.00 ₹ 16,884.00

3.02 39.6.3 10 G SFP + Single Mode/Multi Mode Each 1 ₹ 14,972.00 ₹ 14,972.00

Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for High density use

having features and specifications etc. as mentioned here under- WiFi6 802.11ax 574Mbps (2.4GHz) +

2402Mbps (5GHz), WIFI 6 Certified, 1 x RJ45 console port, MG 2.5G LAN POE Port, factory reset,

WPA/WPA2/WPA3™ Personal/Enterprise, WEP 64/128-bit, SSID broadcast disable, MAC address access

control, Internal RADIUS server, SNMP, Customizable Captive Portal, Auto Channel, Works as Access

Point, WDS, WDS with AP, Wireless Client ., Web (HTTP), Secure Socket Layer (SSL), Traffic control,

Support ATF/Fast Roaming/Band Steering, Supports enhanced security – WPA-PSK/WPA2-

PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks,

Certifications: MTCTE, CE, FCC. Works as Standalone, Compatible with S/W & H/W

Controller with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced Features,

Centralized Device Management, Role-Based Administration, Real-Time Monitoring, VLAN and Access

Control, Auto RF Management and Bandwidth Optimization, Multi-SSID and Captive Portal

Authentication.OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication,

Government of India etc. complete as required.

Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U

height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch Panel should have

ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.

Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL

6 39.13 verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.

6.01 39.13.1 Copper Patch Cords of length 1m (3ft) Each 5 ₹ 173.00 ₹ 865.00

Digitally signed by JAYA

6.02 39.13.2 Copper Patch Cords of length 3m (10ft) Each 5 ₹ 405.00 ₹ 2,025.00

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable

in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per

UL/ETL verification program for compliance with

ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating

Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force :

11.5Kg etc. complete as required.

Supplying and drawing following core Multi mode Fiber Optic Cable having corrugated steel armoring,

leser optimize 50/125 µm with HDPE jacket, LSZH (Low smoke Zero Halogen), Tight-buffered or loose

tube, maximum attenuation: < 3.5 dB/km at 850 nm, < 1.5 dB/km at 1300 nm, bandwidth > 2000 MHz-km

at 850 nm, > 500 MHz-km at 1300 nm compliance and

certifications: ISO/IEC 11801 Ed. 2.2, ANSI/TIA-568- C.3, ITU-T G.651.1 RoHS compliant. Multi Mode Fiber

shall be Central-loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-

1/60794-1-2, ITU-T-REC G.652D and Telecordia GR 20-core, High quality Electro Chromium Coated

Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to

+50 0C and Storage Temperature should be – 5 0C to +50 0C, Maximum Attenuation ± 3.5 dB/km at

Operational Wavelength 850 nm and ± 1.5 dB / km at Operational Wavelength 1300 nm . type of fiber

should be 50/125 / G.652D & Refractive Index should be 1.483/1.478, The value for Mode-filed,Cladding

Diameter 50 ± 2.5 µm and 125 ± 1µm correspondingly

i/c splicing & marking etc complete as required.

8.01 39.20.2 12 Core Multi Mode Optical Fiber Cable Meter 300 ₹ 109.00 ₹ 32,700.00

Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for

jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in

multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2

fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm

tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU,

Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear

screws, and spiral wrap tube etc complete as required.

Supplying and fixing Patch Cord of Optical Fiber Multi Mode or Single Mode LC to LC Fiber Duplex having

high precision ceramic ferrule with good concentricity, Fiber corning single mode G652D, Cable Type

2mm with Mechanical specification Apex Offset < 50 µm, Fiber Height + 100 nm, End-face radius of

Curvature 7mm < R <25mm, Repeatability < 0.2 db, Working ambient Temperature – 5 0C to +50 0C,

Storage Temperature – 10 0C to +50 0C, Length -- 2meter, Type -- LC-LC Duplex etc complete as required.

Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet,

completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking,

Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened

11 39.23 Glass with lock, wall mounting kit, Powder coated

Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed

cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

Supply, Installation, lying, drawing of 4 Pair CAT6AU/FTP Cable having 23 AWG condutor, LSZH

Compliant with ETL&TIA/EIA-568-C.2, Coupling Attenuation should be 45dB min 30-100

MHz40-20Log(f/100)@100-500MHz, Should be certified by ETL/UL in existingconduit/ wiring system as

direction of EIC.

Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera having following

specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera

should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better

progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@

F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with

auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter

or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support,

Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC,

Digital Watermarking.

3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723

4) Wide Dynamic Range:- WDR (120dB or more)

5) Digital Noise Reduction:- DNR (3D) On/Off

6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP

(2560×1440)25/30fps , Sub streams minimum: 720P@25/30 fps

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client

software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection

8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security

logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade

9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It

should be supplied with minimum 128GB memory Card.

10) Recording Management: Format SD, overwrite, storage management, video to NAS device,

11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection;

memory card state detection; memory space detection

12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS,

UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast

Digitally signed by JAYA

13) System Capability: ONVIF, Camera shall support open source VMS

14) Ethernet: 1 RJ 45 10/100 Ethernet port

15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per

site requirement.

16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power

adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power

17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE

18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body

19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing)

20) IR life: 40000 hours or higher 21) Video Bit

rate: 32 KBPS - 8 MBPS or better

22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

4MP @ 25/30fps@1440P (2560 x 1440) Dome Camera with 2.8/ 3.6/ 6/8/12 mm fixed lens (as per site

Supplying Installation Testing and Commissioning of 4MP IP IR Outdoor Bullet Camera having following

specifications and features etc :-

1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date &

Time in live & recorded video 2)Image Sensor:

1/2.8" or better progressive Scan CMOS get color image even at night

condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night

High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt

IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging:

1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light

Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking.

3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723

4) Wide Dynamic Range:- WDR (120dB or more)

5) Digital Noise Reduction:- DNR (3D) On/Off

6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP

(2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps

7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client

software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES

256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout,

video encryption, IP/MAC filtering, HTTPS, trusted upgrade

9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It

should be supplied with minimum 128GB memory Card.

10) Recording Management: Format SD, overwrite, storage management, video to NAS device,

11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection;

memory card state detection; memory space detection

12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS,

UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast,

13) System Capability: ONVIF, Camera shall support open source VMS

14) Ethernet: 1 RJ 45 10/100 Ethernet port

15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per

site requirement.

16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power

adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power

17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE

18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body

19) Operating Condition:- Ambient Temperature:- (- )05°C to 50°C, humidity 95% (max) (non-condensing)

20) IR life: 40000 hours or higher

21) Video Bit rate: 32 KBPS - 8 MBPS or better

22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS

4MP @ 25/30fps@1440P (2560 x 1440) Outdoor Bullet Camera with 2.8/ 3.6/6/8/12 mm fixed lens (as

per site requirement)

Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR)

with camera licenses to record for all channels having specifications and features etc as mentioned below

15 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses for number of

channels of NVR to record per NVR and to provide a live view, storage and simultaneously Multi-channel

playback of all IP, IR camera or more and must be ONVIF with minimum support of 256Mbps incoming

Digitally signed by JAYA

2) NVR should support H.265 or better, H.264, MJPEG, MPEG4 support

3) Must support 1 channel Input, 1 channel Output, RCA for Two-way Talk

4) Intelligent auto power on when power resumes after power outage.

5) Storage: It should support minimum 2 SATA Slots with 20TB capacity/ Slot.

6) Connectivity Interface : 1 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232

7) Backup Interface : Its should have 2 Nosx USB port (1x USB3.0, 1xUSB2.0)

8) Video Output Ports: 1x HDMI and 1 VGA

9) Alarm Ports: It should have 4/1 Ch In/ Out ports to connect various type of external sensors and output

devices like hooter/ Siren etc.

10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number

for power failure, HDD failure, vandalism, tempring, network disconnection and panic

11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and

12) Protocols: HTTP, HTTPS, TCP/IP, IPv4, UDP, NTP, DHCP, DNS, SMTP, UPnP, DDNS, Alarm Server, IP

Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for

remote monitoring without any public IP need.

13) Standards: CE, FCC, RoHS and BIS Certified

14) Power Supply : Should support 12VDC, 4Amp or AC100-240V, 50/60Hz Power supply.

15) Operating Condition : Ambient Temperature (-5°C to 50°C), humidity 90% (max) (non-condensing)

16) The VMS, NVR application shall support all the features & functionalities of the offered cameras.

17) VMS should consist of Base license and Channel Licenses. VMS should be provided with camera

Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to

achieve the functionality.

18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android

and iOS devices, enabling remote monitoring and playback

of cameras/NVR footage.

19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP

address for remote monitoring over the Internet.

21) Must support recording resolution upto 32MP 22) Must support Continuous, Alarm, Motion, Instant,

Panic Recording Mode

23) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring

page to view the alert details. The snapshot function is supported on monitoring and playback page

24) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is

created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email

address shall be configured to receive any combination of critical, warning, or informational messages or

alarm notifications. When an alarm

occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to

record upon alarm

25) It should support Network Support: HTTP, TCP/IP, SMTP, DHCP, DNS, DDNS, FTP, NTP, UPnP, Multi IP

Setting. Convert multiple recording files to one avi/MP4 file.

26) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall

Detection, People Approach Detection, People No. Exception Detection, People Staying Detection,

Violence Detection.

27) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR

alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and

tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error,

IP Conflict and abnormal behavior of fan

28) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer,

logs, presets and email

29) Built-In Artificial Intelligence: NVR should have built-in AI :- - 2 Channel face detection and

recognition, - Minimum

4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection 30) Face

Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum

20,000 Faces or more with Face Detection speed of 12 face images/sec.

31) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions,

face mask, beard, Top color, top type, hat, bag, age, gender and umbrella.

32) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle

model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes.

33) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR

alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and

tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error,

IP Conflict and abnormal behavior of fan,

cybersecurity exception

34) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer,

logs, presets and email.

35) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall

Detection, People Approach Detection, People No. Exception Detection, People Staying Detection,

Violence Detection.

36) Smart playback function: Should support smart search for the selected area in the video and smart

playback to improve the playback efficiency

37) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera

16 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16, 2nd screen:

Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with

upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface,

BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

TOTAL SUBHEAD-11 ₹ 10,69,214.00

SUB HEAD -12 (EXTENAL LIGHT FIXTURE)

CABLING AND INSTALLATION OF LIGHTING FIXTURES FOR EXTERNAL / LANDSCAPE LIGHTING

Receiving, installation, testing and commissioning of the following lighting fixtures and poles including

excavation and back filling as required

Digitally signed by JAYA

Supply & Eraction approve dmake Octagonal Pole made from HR Sheet Steel , hot dip galvanized (as per

IS 2629/2633/4759) , With a base plate , and a door for junction box , conforming to wind spped

standards , Height -7 Meter , tapered design , typically 3 mm thickness , featuring a 70 mm top & 135 mm

bottom dia for 7 M poles , Cpmpomemts included Pole shaft , base plate , foundation bolt set (4-M20 or 4-

M24, 600 mm long ) bracket arm for street light fitting (1 M )

Supply of cement concreate (1:2:4) foundation bolt assembly and muffle(concrete pedestral

Electrical Accessories - Junction Box with 6 mm hylam sheet , 35 mm din rail MCB & stud type terminals

Finish - Hot dip galvanized for corrosion resistenace with top coat of epoxy / PU Paints Nos. 10 ₹ 791.00 ₹ 7,910.00

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135

lm/Watt). Supplying, Installation, Testing & Commissioning

of Street light LED fixture, powder coated pressure die cast aluminium body with built in or

separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC,

frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per

IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70,

under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA

type I/II/III as per the width of the road

and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical

circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per

LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external

connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing

etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output .

LM79 & LM80 Test

report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be

as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium

housing such that LED junction temperature shall not rise above 90°C).

TOTAL SUBHEAD-12 ₹ 1,09,710.00

SUB HEAD -13 (HT CABLE)

Supply of approved high-tension XLPE cable (conforming IS-7098/II/85) as per ISI standard 3 core

armoured with alu. solid/stranded conductor ISI marked as required

Providing & Making cable end termination with heat shrinkable jointing kit complete with all accessories

including lugs suitable for33KV/11KV 3 core XLP Ealum. conductor cable as required as per specification

and as per accepted standard including connection testing complete.

TOTAL SUBHEAD-13 ₹ 1,28,678.00

Supply, installation, testing & commissioning of MDB Panel - as described below, as per the standard

technical specification and as per the directions of engineer incharge of work.

FRONT OPERATED PANEL

Design, manufacture, supplying fixing in position of the following front operated cubicle

type,compartmentalised with front access, dead back, 2mm thick steel enclosed free standing, dust and

vermin proof, switchboard with IP52 protection with hinged and lockable doors complete with

interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415

volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 25 KA symmetrical at 415 volts.

All switchboards shall be modular type and have provision for entry of cables from the top /bottom as

Providing and fixing of 100 x 50 x 6 mm channels for switchboard support.

All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The Busbars

insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.

All MCCB shall have phase barriers, rotary handles and extension terminal as required .

All unbalanced kWH meter shall have communication module for BMS connectivity

INCOMER FROM ESS

2 No. 630A FP MCCB (25 KA) with Microprocessor release and adgustable O/C, S/C with Class-C transient

voltage surge suppression device suitable for 3 phases as per specifications.

METERING & INDICATION

1 set of R,Y,B phase indicating lamps with control MCB

1 Set- of TRIP, ON, OFF indicating lamps.

1 no. Multifunction meter (MFM--3) Ammeter, Voltmeter with selector switch

2 Set of 800A TPN Aluminium Bus Bar with colour coded heat shrinkable PVC Sleeves

` 1 Nos. 315 A TP MCCB (36kA)

` 5 Nos. 200 A TPN MCCB (36kA)

` 1 Nos. 100 A TPN MCCB (36kA)

1 Nos. 63A TPN MCB (10kA)

1 Nos. 40A DP MCB (10kA)

1 Nos. 32A TPN MCB (10kA)

2 NS-E-3 SDB PANEL fIRST FLOOR to 4th FLOOR Set 4 ₹ 2,50,000.00 ₹ 10,00,000.00

Supply, installation, testing & commissioning of MDB Panel - as described below, as per the standard

technical specification and as per the directions of engineer incharge of work.

FRONT OPERATED PANEL

Digitally signed by JAYA

Design, manufacture, supplying fixing in position of the following front operated cubicle

type,compartmentalised with front access, dead back, 2mm thick steel enclosed free standing, dust and

vermin proof, switchboard with IP52 protection with hinged and lockable doors complete with

interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415

volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 16 KA symmetrical at 415 volts.

All switchboards shall be modular type and have provision for entry of cables from the top /bottom as

Providing and fixing of 100 x 50 x 6 mm channels for switchboard support.

All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The Busbars

insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.

All MCCB shall have phase barriers, rotary handles and extension terminal as required .

All unbalanced kWH meter shall have communication module for BMS connectivity

1 No. 200 A FP MCCB (16 KA) with Thermal Magnetic Release O/C, S/C with Class-C transient voltage

surge suppression device suitable for 3 phases as per specifications.

1No. 63A DP MCB

METERING & INDICATION

2 set of R,Y,B phase indicating lamps

2 Set- of TRIP, ON, OFF indicating lamps.

1 no. Multifunction meter (MFM--3) Ammeter, Voltmeter with selector switch

2 Set of 300A TPN Aluminium Bus Bar with colour coded heat shrinkable PVC Sleeves

2 Nos. 63A TPN MCB (10kA)

3 Nos. 40A DP MCB (10kA)

Supply, installation, testing & commissioning of MDB Panel - as described below, as per the standard

technical specification and as per the directions of engineer incharge of work.

FRONT OPERATED PANEL

Design, manufacture, supplying fixing in position of the following front operated cubicle

type,compartmentalised with front access, dead back, 2mm thick steel enclosed free standing, dust and

vermin proof, switchboard with IP52 protection with hinged and lockable doors complete with

interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415

volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 16 KA symmetrical at 415 volts.

All switchboards shall be modular type and have provision for entry of cables from the top /bottom as

Providing and fixing of 100 x 50 x 6 mm channels for switchboard support.

All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The Busbars

insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.

All MCCB shall have phase barriers, rotary handles and extension terminal as required .

All unbalanced kWH meter shall have communication module for BMS connectivity

1 No. 63A FP ATS (16KA) with Thermal Magnetic Release O/C, S/C

1 No. 63A FP MCCB (16 KA) with Thermal Magnetic Release O/C, S/C with Class-C transient voltage surge

suppression device suitable for 3 phases as per specifications.

METERING & INDICATION

1 set of R,Y,B phase indicating lamps\

1 Set- of TRIP, ON, OFF indicating lamps.

1 no. Multifunction meter (MFM--3) Ammeter, Voltmeter with selector switch

1 Set of 150A TPN Aluminium Bus Bar with colour coded heat shrinkable PVC Sleeves

3 Nos. 63A TPN RCBO(16kA)

4 NS-E-6 UPS OUTPUT PANEL Set 1 ₹ 45,000.00 ₹ 45,000.00

Supply, installation, testing & commissioning of MDB Panel - as described below, as per the standard

technical specification and as per the directions of engineer incharge of work.

FRONT OPERATED PANEL

Design, manufacture, supplying fixing in position of the following front operated cubicle

type,compartmentalised with front access, dead back, 2mm thick steel enclosed free standing, dust and

vermin proof, switchboard with IP52 protection with hinged and lockable doors complete with

interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415

volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of 16 KA symmetrical at 415 volts.

All switchboards shall be modular type and have provision for entry of cables from the top /bottom as

Providing and fixing of 100 x 50 x 6 mm channels for switchboard support.

All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The Busbars

insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.

All MCCB shall have phase barriers, rotary handles and extension terminal as required .

All unbalanced kWH meter shall have communication module for BMS connectivity

1 No. 100A FP MCCB (16 KA) with Thermal Magnetic Release O/C, S/C with Class-C transient voltage

surge suppression device suitable for 3 phases as per specifications.

1 No. 63A DP MCB

METERING & INDICATION

1 set of R,Y,B phase indicating lamps\

1 Set- of TRIP, ON, OFF indicating lamps.

1 no. Multifunction meter (MFM--3) Ammeter, Voltmeter with selector switch

2set of CT 100/5A Cl-1, 15VA

Digitally signed by JAYA

1 Set of 150A TPN Aluminium Bus Bar with colour coded heat shrinkable PVC Sleeves

1 Nos. 32A TPN MCB (16kA)

6 Nos. 63A DP MCB (10kA)

5 Nos. 40A DP MCB (10kA)

TOTAL SUBHEAD-14 ₹ 15,92,622.00

SUB HEAD -15 (HV SUBSTATION)

1 11 KV HT Panel (Single Panel Board)

01 INCOMING & 02 OUTGOING

Supply, installation, testing and commissioning of 11 KV single VCB panel board complete with all

accessories as per technical specifications including all factory tests ans as follows:-

1 Nos. 11 KV, 630 A VCB (350 MVA) 18.3 kA for 1 second internal Arc tested rupturing capacity at

11kV rated metal clad, floor mounting, horizontal isolation horizontal drawout type, with

Mechanical push button and as per specifications complete with the following:

Manually & motor operated (230V AC), spring charged trip free type, VCB incorporating

mechanical as well as electrical ON/OFF indication, spring charge/discharge mechanical

indication"OFF" push button test/service position limit switches with 4NO/4NC breaker auxilary

contacts in service position.

(ii) Cast Resin CT with double wound, 30/1+1 & with metering and protection core.

(iii) Core-1 : 15VA burden for protection ( Class 5P-20) - Set 3