CONSTRUCTION OF GYMNASIUM AT FAMILY QTRS FORT AREA NAGPUR.

Amount

Surface excavation in soft /loose soil n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out in Hard soil complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M & L for flat and curved Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and as directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions. Rough finished Add for fairsurfaces of finished Square, Circular rectangular on plan or polygonal concrete complete all as specified and directed.

M & L for Formwork to soffits of suspended slabs such as Roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or Sloping) and simillar work complete all as specified and directed.

M & L for RCC M25 design mix, using 20 mm graded stone aggregate for Roofs, Slabs supported on walls, beams and columns in floors, landings, balconies,canopies, deck slabs and inshelves and the like work complete all as specified and directed.

M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M & L for Mild steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binderscut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia Complete all as specified and as directed.

M&L for RCC M25 (Design Mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC M25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed

M&L for RCC M25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L for RCC M25 (Design Mix) as in chajja etc complete all as specified and directed

M&L for PCC (1:2:4) type B0 using 20 mm graded agg as in coping /bed block etc inclduing necessary form work complete all as specified and directed

M&L for PCC (1:2:4)) type B1 using 40 mm graded agg as in benching/padding /moulding on top of chajja junctions etc.complete all as specified and directed

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L Rendering 10 mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement complete all as specified and directed..

Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed

M&L for preparing newly plastered surfaces and applying two coats oil bound distemper over a coat of 1mm thick putty over a coat of chlk whiting primer complete on wall as completed all as specified and directed

M & L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM ( 1:3 ) finished even and smooth (without using extra lime or cement) on Ceiling complete all as specified and as directed.

M&L for preparing surfaces of any description and applying three coat of white wash on ceiling etc complete all as speciifed and directed.

M&L Rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement complete all as specified and directed.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

S&F powder coated aluminium frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc complete all as specified.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint

S&F powder coated aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing ,anodised aluminium snap beading, screws etc. complete all as specified and directed

S&F 4 mm thick Figured glass and glazing with rubber beading and aluminium glazing bar in each panel but exc. 0.5 Sqm each complete all as specified and directed

S&F plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading n exc 0.5 sqm each pane complete all as specified and directed

S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165

S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete all as specified and directed

S&F in repairs hydraulic door closer of aluminium fixed to door shutters of designation 2 complete all as specified and directed

M&L for powder coated aluminium door shutters single/double leaf, side hung type, with top and lock rail of size 83X44.45X2mm thick, bottom rail 150X 44.45X2mm thick styles/meeting styles shall be of size 83X44.45X2mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 200mm long 2 nos to each shutter complete all as specified and directed. .(Prelaminated board and glass to be measured & paid separately).

S&F 12mm thick prelaminated particle board (both sides laminated) of interior grade, type-II of approved brand with lamination of approved shades complete fitted in door panels, partitions etc all as specified.

S&F plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beading exc 0.5 sqm each pane complete all as specified.

S&F Curtain rod with a telescoping brackets to fit both rod and mounting hardware modular type complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and complete all as specified and directed

S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as speicified and directed

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed complete all as speicified and directed

S&F 250mm long Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed

S&F for 150mm long aluminum handles, cast type, anodized complete all a specified and directed.

M&L for Anti -termite treatment to the under plinth protection, top surface of filled earth ,bottom and sides of excavation at rate of 5 Ltrs of emulsion per square meter of surface area complete all as specified and directed

M&L for ATT to treating the backfill in contact with foundation at the rate of 7.5 Ltrs of emulsion per square meter of vertical surface complete all as specified and directed.

Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/boulers complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base complete all as specified and directed.

M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)complete all as specified and directed.

M&L Gym rubber floor size of tile 500mm x500mm x22 mm @5.5 kg each tiles ,black red blue grey made from shredded premium recycled rubber strong and durable quality product extermely lightweight and tear resistant, anti-slip, foot grip and scratch resistant , highly impact-resistant ,soft and comfortable ,fire resistance complete all as specified and directed

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

Material & labour Non - skid Ceramic coloured tiles 7 to8 mm thick jointed free squarere/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over 15mm thick screed bed CM 1:6 all as specified and as directed.

M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed.

M&L for preparation New steel and iron surface not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth with out using extra cement complete all as specified and directed.

S&F steel water tubing 15mm bore, glavanized medium grade with and including provision of all fittings of ISI marked and concealed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F steel water tubing 20mm bore, glavanized medium grade with and including provision of all fittings of ISI marked and concealed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and as directed.

S&F 20mm bore ball brass valves. high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F for PVC (SWR) vent cowl suitable for 75mm dia PVC pipe complete all as specified and as directed.

S&F 100 mm Cast iron nahani, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F PVC 100 mm gully, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repairs Vitrous china wash basin, size 555x410x205mm, wall hung Basin with full pedestal and fixing accessories complete all as specified and directed. Make Essco by Jaquar (Cat No-ECS-WHT-801, ECS-WHT- 301) or equivalent complete all a specified and directed.

S&F in repairs Single lever basin Mixer without Popup waste with 450mm long Braided Hoses all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101011NB) or equivalent complete all a specified and directed.

S&F s Angular Stop Cock with wall Flange Make : by Jaquar (ORP-10053PM) or equivalent complete all a specified and directed.

S & F 15 mm bore chromium plated bib taps with Wall Flange, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferrule Complete all as specified and directed.( CAT: ORP-10037PM)

S&F in repairs 2 way bib cock with wall fange all as specified and directed Make : Essco by Jaquar (Cat No:APR-101041) or equivalent complete all a specified and directed.

S&F in repairs Bowl for Coupled WC with PP normal close slim seat cover, Hinges, Fixing accessories and accessories Set, size 395X680X770mm, P/s Trap-180mm/ 220mm (Essco by Jaquar Cat No AIS-WHT-101751NSN/AIS-WHT-101751NSN) and cistern with cistern fittings (Essco by Jaquar Cat No - AIS-WHT-101201) Essco by Jaquar or equivalent complete all a specified and directed.

S&F Hand shower (health Faucet) (ABS body) with 8mm dia, 1.2 Meter long Flexible tube & wall Hook all as specified and directed Make : Essco by Jaquar (Cat No ALE-ESS-593) or equivalent complete all a specified and directed.

S&F Towel Rack 600mm long with lower Hangers, Stainless Steel fixed to walls with chromium plated (CP) brass screwsall as specified an directed. Make Essco by Jaquar (AEC-1181) or equivalent.

S&F Towel ring square fixed to walls with chromium plated (CP) brass screws Make Essco by Jaquar (AEC-1121) or equivalent.

S&F Glass Shelf 600mm long fixed to walls with chromium plated (CP) brass screws. Make Jaquar (ACN-CHR-1171N) or equivalent.

S&F Toilet Paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Make Jaquar (AEC-1151) or equivalent.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in Repairs 32mm Waste fittings, brass,chromium plated for glazedw are sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 200mm bore including packing under and haunching against the sides of pipe after they are laid complete all as specified and directed.

M&L for Reinforcement concrete pipes, class NP-2 laid and jointed complete with collars for 200 mm bore dia of pipe complete all as specified and directed.

M&L for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slabs etc set in cement mortar (1:4) including use and waste of form work & placing on drains complete all as specified and directed.

M&L for PCC (1:2:4) type B0 using 20 mm graded agg as in coping etc inclduing necessary form work complete all as specified and directed.

M&L for PCC (1:2:4)) type B1 using 40 mm graded agg as in benching etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.

All as per item No. 91 abov but add or deduct for each 25mm girth or part thereof over or under 30 cm complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 91/1 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as orginal formation complete all as specified and directed.

Supply only liquid water proofing admixture complete all as specified and directed.

M&L for glazed Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over a layer of fine river sand, watering and consolidating complete all as specified and directed. (Note: Sand will be measured paid for seperately under respective item supplied only).

Supply only river bed fine sand for screed bed for paving flooring complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil/water based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick plaster in CM 1:3 and aluminium paint over membrane complete all as specified and directed.

Returning, filling in, including spreding, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed Complete all as specified and as directed.

Excavation in trenches for laying of cable trench, pole and stay foundation in any type of soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out. Complete all as specified and as directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLSH PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit not less than 20 mm dia with all accessories and FRLSH PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth, including cutting and chasing of wall surface for laying PVC conduit and modular sunken box and connecting earth. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles. Note :Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following :- One light /fan point controlled by one switch

All as per item No 101 here in before but One 5 pin socket outlet 6 Amps on independent board

All as per item No 101 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed.

Supply and fixing modular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed.

Supply and fixing modular socket outlet 2/3 pin 6 Amps combined 2 module, complete all as specified and directed.

Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed.

Supply and fixing modular socket multipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed. .

Supply and fixing modular step type, 2 module electronic fan regulator heavy duty 120watts 240 volts. , complete all as specified and directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets complete all as specified and as directed.

Supply and fixing modular cover plate with metal frame (inner and outer) 8 module for mounting switch and sockets all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

Supply and fixing LED luminaire 595 mm x 595 mm, 36 watt, 220 V AC, 6500 K recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting complete all as specified and directed.

Supply and fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including GI bracket of size 25/32mm with clamps complete all as specified and directed.

Supply and fixing of wall mounting fan 400 mm sweep, 230 volts, AC, single phase complete with all fixing accessories all as per site requirement complete all as specified and directed.

Supply & fix in repair sheet metal enclosure Vertical TPN DB 6 way as per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 DB's, With provision for DPX³ 250 MCCB as incomer and SP/TP MCB's as outgoing, Complete all as specified and directed.

Supply and fix in repair MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA, including providing thimble for out going cables complete all as specified and directed.

Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Materials and labour as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core, Complete all as specified and directed

Supply and lay in High density polyethylene pipes (HDPE) of size 50mm laid in trenches, Complete all as specified and directed

Material and labour for PCC Type D2 ,1:3:6 by using ( 40 mm aggregatestone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed

Supply and fix Stop valves of size 25mm (1"), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed

Supply and fix modular motor stater 20A, 2 moduler of AC complete all as specified and directed

Rehal Construction

dhanshree enterprises

M/S Darshan Singh Plaha

M/s Rana Construction

Vishwakarma Engineering Works

M/s Jagdish Staioners and General Stores

khushal constructions

M/s M.G. Hargunani

M/s Rahul Traders

Bidder Name

M/s ABHIMAN HEGDE

Vishwakarma Engineering Works

Rehal Construction

M/S Darshan Singh Plaha

dhanshree enterprises

khushal constructions

M/s Rahul Traders

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

M/s Rana Construction