SPL REPAIR TO QTR NO 5/3 18/1 17/3 AND 30/4 MGSF AND SPL REPAIR TO ROOF TREATMENT AND ALLIED WORK AT 7 TIMMAYA ROAD AND PROVN OF RAIN WATER SHELTER WITH HARD STANDING AT 10 K DILKUSHA UNDER GE (WEST) LUCKNOW

Amount

Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed.

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 using WPC @ 2% by weight of cement on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed.(Note :- WPC shall be measured and paid seperatelly)

Supply only Integral water proofing compound confirming to IS-2645-2003 of approved make.

M & L for 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for 10 mm thick rendering in CM (1:3 ) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed.

M &L for Non skid ceramic coloured floor tiles shade as approved and size 300 x 300mm x 7mm thick set on 15mm thick in screed bed in cement mortar (1:6) and pointed in neat cement slurry including jointing with white or colour cement to match complete all as specified and directed

M & L for glazed ceramic colour tiles of size 300 x450mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including10mm thick backing coat in CM 1:4 all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean, washing down with water to remove dust etc including Brushing neat cement slurry with 3.0kg of cement per sq. metre

M & L for coloured vitrified ceramic tiles, Dark shed (Double Charged) of size 600x600x8-10mm thick as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over and including screed bed or bedding layer 15mm thick in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No-13 above but as in vertical surfaces as in dado/skirting with and including 10mm thick backing coat in CM 1:4 complete all as specified and direceted.

M&L chequered cement concrete tiles 30cm x30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete alla s specified.

M&L 18-20mm thick granite stone slab, machine cut and polished in both side as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed.

M & L for 20mm thick granite stone slab as in cooking platform,window cill over 15mm thick screed bed in CM 1:4 including cutting, polishing & rubbing and including rounding of exposed edges complete all as specified and direceted.

M & L for drilling through holes in granite stone for pipes etc not exc. 25 mm dia all as specified.

Demolition of RCC as in lintel, shelves etc nexc 15 cm thickness (below or above ground level)

M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast etc. with necessary form work complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

Taking down steel tubing and connections and fittings 15mm bore including cleaning for refixing or removing from site complete all as specified and direceted.

Taking down steel tubing and connections and fittings 20mm bore including cleaning for refixing or removing from site complete all as specified and direceted.

M & L for GI tubing 15mm dia, medium grade, galvanised with all fittings fixed to wall and floor all as specified.

M & L for GI tubing 20mm dia, medium grade, galvanised with all fittings fixed to wall and floor all as specified.

M & L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:3 not exc 10cm in girth.

Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and direceted.

S & F PVC (SWR) Pipes 160 mm dia single socketed in any length with rubber ring joints , fixed to walls complete all as specified and direceted.

S & F PVC (SWR) Pipes 110 mm dia single socketed in any length with rubber ring joints , fixed to walls complete all as specified and direceted.

S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F PVC (SWR) bends any radius 160mm dia.

S & F PVC (SWR) bends any radius 110mm dia.

S & F PVC (SWR) single TEE equal 110mm dia.

S & F PVC (SWR) bends any radius 75mm dia.

S & F in repair 75mm dia PVC Floor trap incl grating fixed in floor with cement complete all as specified and directed.

Supply and fixed in repair vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm, PTMT waste coupling and 32mm dia waste pipe of suitable lengh with socket, complete all as specified and directed.

S & F in repair vitreous china wash down water closet (pedestal pattern) pan white with “P” or “S” trap including connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed.

S & F in repair Vitreous china squatting pan Orissa pattern 'long pan' size 580x440mm white with 'P' or 'S' trap, front or back inlet any pattern excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and directed.

S & F in repair 15 mm bore CP brass Central Hole Basin mixer fixed to GI pipe with pvc connection pipecomplete all as specified.

S & F in repair 15 mm bore CP brass wall mixture (three in one) fixed to GI pipe Braided Hoseries.

S & F in repair cast copper alloy bib taps chromium plated 15mm bore pipe with crutch or butterfly handle complete all as specified and directed.

S & F in repair Angle valve cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.

S & F in repair CP shower rose fancy type with or without swivel joints of size 125mm dia including fixing to steel pipe or union as directed.

S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall as directed.

S & F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified

S & F in repair hand shower (Health facut) with 1 M flexible tube with wall hook bracket etc, complete set of superior quality.

S & F in repair CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality.

S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer as directed.

S & F in repair CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long.

S & F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed.

S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.

S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600 mm including screws and weight not less than 5.00 Kg complete all as directed.

S & F in repair rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed.

S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm and removing from sites directed.

All as item No 61 above but exc 1.5 Sqm but n.exc 4 Sqm Each.

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm Each and removing from site.

S & F Second class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S & F 35mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.

S & F 30mm thick second class hard wood glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauge etc (devided into panels with plain sash bars any numbers) edges of framing plain, chamfered or rounded all as specified under 8.20(a) of SSR Pt-I.

S & F Mild steel framed work such as grills, grating, framed guard bars and similar work conforming to Fe 290 Gde E -165 complete all as specified and directed. .

S & F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and but both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. all as specified and directed.

S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed.

S & F powder coated (minimum thickness of powder coating 50 micron) anodised Aluminium frame for doors, windows, ventilater with one or more rebates including jointing cleat for fixing etc, complete all as specified and directed.

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar using Aluminium section 65x38x1.25 to 1.5mm thick including 4 mm thick pin headed/tinted glass, screw, jointing cleats, rubber packing, Aluminium snap beading, complete all as specified and directed.

S & F Powder coated anodised Aluminium three track sliding type glazed window shutters with 4mm thick plain sheet glass and stainless steel wire cloth with 0.36 mm dia of wire and average width of aperture 1.4mm) with members of window shutter of section 38x12x1.25 to 1.5 mm and other standard Bombay sliding sections including necessery fiber wheel rollers suitable handles to facilitate sliding and all necessary jointing cleats, glazing clips,rubber packing, anodised aluminium snap beading, etc all as specified and directed at site.

S & F Aluminium Butt hinges, 100mm size complete all as specified and directed.

S & F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed.

S & F alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed.

S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed 140 MM Overall length of cover plate.

S & F Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as spacified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F magnet catcher heavy duty for cupboard shutter complete all as specified and directed.

S&F 8 to 10 mm dia anchor fastner of lentgh ecx 75 mm but n. exc 150 long including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine compete all as specified and directed at site. Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt.

S&F in repair fancy type 25mm dia stainless steel curtain rods/Cupboard hanging rods including bracket/junctions /wall to wall and with rings of best quality as approved by Engineer-in-Charge.

S&F 4.8 mm Sheet glass,ordinary quality in square of any size complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm fixed with stanless steel staples or steel/wooden beadings to windows complete all as specified and directed.

S & F 300 mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and S&F 3.00 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

M & L for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of wall and and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L 1 mm thick Birla white putty on wall (two or more coats)complete all as specified and directed

M & L for preparation of new plastered surface of wall and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, as per manufacturer's specification, complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. including over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, complete all as specified and directed.

M & L for for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old treated ceiling surface and applying two coats of whitewash complete all as specified and directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint all as specified.

Demolition of Cement concrete (unreinforced) in ground floor and paving not exc 15cm thicknes below or above ground level complete all as specified directed

M&L for cleaning the exposed concrete surface of floor/ wall/ chajja by brushing & watering and applying one coat of TAPECRETE P-151 Acrylic Polymer Modified Cementitious slurry consisting 1:2 (1 part of tapecrete : 2 parts of cement by weight) and shall be allowed to dry for 4-6 hours, then applying second coat of 1.5mm thick tapecrete brush topping consisting 1:2:2 (1 part of tapecrete : 2 parts of cement : 2 parts of silica sand by weight) over the first coat and cured for next 2 days complete all as specified and directed.

M & L for PCC 1:5:10, type E-2 using 40 mm graded stone aggregate as fondation filling and mass concrete in sunken floor etc. complete all as specified and directed.

M & L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in leveling course,padding of any thickness etc. complete all as specified and directed.

M & L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as benching/coping etc.complete all as specified and directed.

M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as psecified.

M & L for 10mm thick rendering on fair faces of brickwork or concrete surface in CM (1:3 ) including finished even and smooth (without using extra lime or cement) using 100% coarse sand on roof surface including WPC as per manufacturer's instructions complete all as specified and directed.

M & L for provision of roof treatment using polymeric water proofing membarane including taking down existing treatment and removal of waste materials all as given below:- (a) Taking down existing water proofing treatment and removal of waste material retrieved to a distance nexc. 500m where directed. (b) M & L for Applying a coat of bituminous primer to IS : 3384 -1986 @ 0.25 Ltrs/Sqm and allowed to dry. (c) M & L for Laying 3mm thick APP membarane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 100mm and 150mm at longitudinal and transverse direction respectively and sealed by flame,sealing all overlaps complete including treatment at all junctions and corners.The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of Aluminium paint on membrane surface all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar to a depth measured from the face of jamb exceeding half brick but not exceeding one brick and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required for fixing purlins,rafters etc.

S & F steel tubular section Fe-290 (Gde E-165) as in beams ,rafters,purlins and running rails and guide for sliding doors fixed with MS cleats or other connecting plates including cutting, grinding, welding etc as required complete all as specified and directed.

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).Complete all as specified and directed.

Providing post ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified.

Refixing 15mm/20mm dia old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.(Note Material reused retrived from demolition)

M&L for repairing of cracks by cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.exc 250 Ltr but n.exc 500 ltr in capacity (Cleaning repairing, etc. measured separately

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.exc 500 ltr but n.exc 1000 ltr in capacity (Cleaning repairing, etc. measured separately

Extra over rendering/plastering for work in isolated widths or in widths not forming part of general plastering such as in sunk pannels, cornices, skirtings,drip moulds and simillar work n.exc 15 CM in width or girth,including cutting to edges all mi-tres and stopped ends ect.

Excavation in post holes in (or similar holes) each n.exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken bubble mixed with earth arround in layers n.exc 25 cm thick and removal of surplus soil compleate all as specified.

M&L for cement concrete 1:2:4 type B-2 (40mm graded) stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

S&F rolled mild steel in joist, channel, angle or tee sections, circular tubes fixed independently as in post, pillars stanchions etc (FE-290 Gde E165) complete including cutting grinding welding etc as required complete all as specified and as directed.

S&F for MS steel work as in gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (F290 Gde E-165) complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggrtegate as in subbase complete all as specified and directed.

M & L for factory made machine pressed precast 60mm thick PCC inter locking paver blocks M-35 grade as design & pattern approved by GE as in hard standing and filling of joints with fine sand complete all as specified and directed:

M&L for sand filling under floors as in coushoning for interlocking tiles complete all as specified and directed.

Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly complete all as specified and directed at site for the following:-(NOTE: Switch and socket to be measured and paid for separately):-

(a) One light/fan point controlled by one switch

(b) One socket outlet point 5 Amp on an independent board

(c) Same as item no 125 but on the same board

(d) Call bell / buzzer point controlled by one bell push

All as item no 125 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

S & F switch piano flush button single pole one way 15 Amp 240 volt complete as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete as directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed

S & F ceiling rose surface bakelight two to three terminal complete as directed

S&F bell push single pole one way 5 Amp

S&F Call bell AC single pole 230 Volts musical type complete all as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings as directed.

S&F fan regulator electronic, step up socket type, 240 volt suitable for BLDC fan and conection complete all as specified and directed

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 4 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’

Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F MCB SP 10 to 40 Amp 240 volts 10 KA breaking capacity as directed.

S&F MCB SPN 40 Amp 240 volts 10 KA breaking capacity as directed.

M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete incl Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed.

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts.

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Make: Philips Vista glow ordering code : WT140W LED7S NW PSU S1 PC./ Bajaj wee plus cat no BIBWP 6W LED/

Supply and fix in repairs exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall, including making recess on wall of required size and all necessary fixing accessories complete all as specified and as directed

Supply and fixing exhaust/fresh air fan 230/240 V of size 250 mm sweep (PVC body) 1100-1325 RPM with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed

Taking down carefully ceilling fan of any size and type and refix on same or new location all as directed.

Taking down old electric meter and refixing the same on bakelite sheet

S&F modular switches 1 way 6A,1 module,

S&F modular switches 1 way 16A,1 module,

S&F modular 6 A sockets-2/3 pin combine 2 module

S&F modular 6A/16A sockets-2/3 pin combine 2 module

S&F modular bell push single pole one way 5 Amp .

S&F modular rotary step type fan regulator electronic, step up socket type, 240 volt suitable for BLDC fan and conection complete all as specified and directed

S&F Modular white cover plate with frame 8 module

S&F Modular white cover plate with frame 6 module

S&F Modular white cover plate with frame 3 module

S&F Modular white cover plate with frame 1 module

Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F in repairs MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S & F in repair decorative wall bed light fixture made up of metal base, synthetic white colour and round metal base with bend pipe integrated LED type, 230 V, 3000K complete incl all connections complete all as specified and directed.

S&F MCCB 63-125 Amps 415 volts, 4 pole 16 KA breaking capacity complete as directed

S&F sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S & F in repairs integrated LED type Post top lantern with high power 25/30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed

S&F in repairs of surface type round LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours aliminium PDC all as per specified and directed.

M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 3 of MES SSR Pt-I 2009 print and as directed.

Spectrum Enterprises

M/s Aman Construction Company

M/S Reliance Construction

M/s Chandra Mohan and Sons

KUMAR ENTERPRISES

M/S Vindhya Infraventures

M/S KAUSHIK CONSTRUCTION

m/s raghubar dayal