Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC | L1 | Accepted-AOC lowest | |
| 2 | L2₹40.0 L+₹5.7 L (16.5%)Rejected-AOC | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹43.4 L+₹9.1 L (26.6%)Rejected-AOC | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹43.8 L+₹9.5 L (27.6%)Rejected-AOC | L4 | Rejected-AOC not found lowest | |
| 5 | L5₹44.0 L+₹9.7 L (28.2%)Rejected-AOC NH 44 BUILDING COLONY NO 01 SUJANPUR TEH DISTT PATHANKOT PUNJAB 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L5 | Rejected-AOC not found lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
10 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Basoli
GE Basoli PO lakhanpur Distt Kathua JK
PROVN OF 04X SINGLE JCOS ACCN AND SPECIAL REPAIR TO BLDG NO NP 10 AT JANGLOT GRND UNDER GE BASOLI.
2023_MES_574527_2
GE/BAS-70/2022-23
Open Tender
Civil Works
Item Rate
180 days
Janglot under GE Basoli
class D catg a(I)
7 documents required · 7 mandatory
₹500
Yes
GE Basoli
₹90,000
Yes
12 May 2023
23 Feb 2023
11 Mar 2023
23 Feb 2023
10 Mar 2023
2 Mar 2023
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing ,dressed stone work and precast concrete article complete all as specified and directed.
M&L for 20mm thick cement plaster in cement mortar 1:4 for concrete slab or RCC roof, surface finished even and smooth using WPC as per manufacturers instructions, complete all as specified and directed. NOTE:- WPC shall be measured and paid separetly through respective item of this BOQ.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.
M & L brick work with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:6) complete all as specified and directed
M & L brick work with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:4)including flush pointing with same mortar as the work proceed complete all as specified and directed
Taking down of steel tubing and connections for 15mm bore pipe in any location, conceled in wall, under floor, complete all as specified and as directed.
Taking down of steel tubing and connections for 20mm bore pipe in any location, conceled in wall, under floor, complete all as specified and as directed.
Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. all complete and as specified.
M & L rendering 15mm thick on stones masonry surfaces or Brick/ Concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified.
M&L preperation of new plastered surfaces and applying 3mm thick wall care putty on plastered surfaces and over applying two coat of distemper oil emulsion complete all as specified and directed
M&L preperation of old plastered surfaces and applying 3mm thick wall care putty on plastered surfaces and over applying two coat of distemper oil emulsion complete all as specified and directed
S&F for Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mps as in roof covering /clading to wall fixed with self taping screw complete all as specified and as directed.
M&L PCC (1:2:4) type B-0 using12.5mm graded stone aggregate of avg thickness of 50mm top surface of plain concrete padding/flooring complete all as specified and directed
S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mps as in roof covering /clading to wall fixed with self taping screw complete all as specified and as directed.
M & L rendering 15mm thick on stones masonry surfaces on Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement mixed with WPC @3% by weight of cement complete including taking down cement plaster complete all as specified and directed.
M&L for steel work in tubular trusses,post & purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and as directed.
S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws all as specified and as shown on drawing
S&F powder coated of appproved colour, aluminium single or double leaf door shutter in single or two panels with standered aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clilps,rubber neoprene packing , handles 2 Nos in each door hinges,powder coated snap beading screws etc in partition of partly glazed (5mm thick tinted) and partly prelaminated board 12mm thick (bothside) including locking arrangement, using following make of Jindal or equivalent. complete etc complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter,with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.
S&F factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30mm thick complete all as specified and as directed.
S&F 35 mm thick Factory made 2nd class Hard wood shutter with top panel Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.(without sash bars) fitted with cut and mitred beds for securing glass, etc.; and bottom panel with panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a), complete all as specified and as directed.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats all complete and as specified.
S & F hollow profile PVC ceiling consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site including aluminium frame 8mm thick complete all as specified and as directed. Make:- Gyproc, VTC, or equivalent.
Dismantling structural steel work i.e mild steel wrought iron including doors , gates and any type of angles complete all as specified and directed
M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed
M&L for preparation of New wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed .
S&F 300 mm ordinary rat tail rod pattern spring incl roller and roller plate (mild steel) complete all as specified and directed
M&L anodised aluminium alloy handle cast type anodised and fixed, 150 mm size complete all as specified and directed
S&F in Repair rotational molded polyethylene water storage tank (Cylindrical vertical with closed tip) of M&L 500 ltrs hoisted and fixed in position all as specified and directed in SSR-Part-I on roof, complete all as specified and as directed.
Supply and fixed gun metal gate valve 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
Supply and fixed gun metal gate valve 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
Supply and fixed Float Ball Brass Valve, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule all as secured and directed 20mm bore, complete all as specified and as directed.
Supply & fixed 15mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary changing and cutting in brick/concrete surfaces and making good the disturbed surface complete in all respect as specified in CM 1:4, complete all as specified and as directed.
Supply & Fixed 20mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary changing and cutting in brick/concrete surfaces and making good the disturbed surface complete in all respect as specified
Supply & Fixed 25mm bore dia of tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary changing and cutting in brick/concrete surfaces and making good the disturbed surface complete in all respect as specified
S& F CP Shower rose with or without swivel joints, suitable for 15mm bore pipe,including fixing to steel pipe or union complete all as specified and as directed.
S & F chromium plated Soap dish 15mm long, any type, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.
S & F Three tier glass shelf assembly, glass thickness not less then 4.0mm , with brass frame of chrome matt finish, with all manufacturer’s accessories, all as specified and directed.Make Jainko,Jaquar,Cera
S & F Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe suitable for 15mm bore pipe, complete all as specified and directed
S&F Vitreous China Wash down water closet Pedestal Pattern with P or S Trap, cloured, including connection to drain (outgoing pipe ) and to flushing pipe, antisyphonage pipe, etc complete all as specified and as directed. Make :- Cera, Parryware, Hindware
S & F fancy type health faucet with 8mm dia 1mtr long flexible tube (back flow preventer) chromium plated of 15 mm bore complete all as specified and as directed.
S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.Make :- Cera, Parryware, Hindware
S&F bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type long body chromium plated as complete all as specified and as directed.
S & F Stop valve / Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, in reapirs complete all as specified and directed.
Dismantling of PVC or caste iron pipes jointed in cement mortar and taking out upto 110mm etc complete all as specified and directed.
S & F 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to trench and floor , complete all as specified and as directed.
S & F 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed in trench and floor, complete all as specified and as directed.
S & F PVC SWR Bends in any radius 110 mm bore with access door in repair, complete all as specified and as directed.
S & F PVC SWR Bends in any radius 75 mm bore with access door in repair, complete all as specified and as directed.
S&F in repairs for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.
S&F PVC (SWR) Vent cowl 75 mm bore in repair, complete all as specified and as directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.
S&F Curtain rod 20mm dia of Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.all as specified and directed.
M&L Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes, complete all as specified and as directed.
M&L For Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint in Camouflage Pattern having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.
M&L For Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified.
Supply only integral water proofing compound complete all as specified and directed.
M&L Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement including taking down cement plaster complete all as specified and directed
M&L Preparing new plastered surfaces of ceiling (plastered or unplstered) for white washing and applying three coat of white wash complete all as specified and directed .
M&L Preparing old white plastered surfaces of ceiling (plastered or unplstered) for white washing and applying three coat of white wash complete all as specified and directed .
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for Vitrified tiles double charge in dark shade 9-10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed in CM 1:4, complete all as specified and as directed.
M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but n . exc 0.11 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including 15 mm screed bed in CM 1:6, complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surfaces 300x600X7mm/ 450x300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in C.M 1: 4 , complete all as specified and as directed.
M&L 75 mm thick PCC Type C-2 ,1:3:6 (using 40mm graded stone aggregate) in plinth protection etc, laid in alternate bays complete all as specified and as directed.
Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering complete all as specified and directed.
S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and as directed.Make :- Cera, Parryware, Hindware.
S&F in repair Sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. Make: Blue Star/ Neelkamal/ Nirali
S&F for Vitreous china wash basin white ,oval type size 560 X 410X410 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and as directed.
S&F in repair Stainless Steel plate rack of size 900mm x 900mm x 250mm 0.80mm thick sheet complete all as specified and directed. Make: Blue Star/ Neelkamal/ Nirali
S & F hollow profile PVC Wall Lining and consisting of 1mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and and as directed.
Demolition of wall and ceiling board (fibre,pulp,insulationetc) or insulation boards/slabs/blankets any thickness,including cover fillets complete all as specified and directed
M&L 2nd class softwood Plain fillets exceeding 13 and not exceeding 25 Sq cm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.
M&L for Decorative laminate type 1 of surface finish, Thickness in 0.9mmcolour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and as directed.
S&F For Veneered decorative 12mm plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work, incl wooden lipping on external Faces complete all as specified and directed.
S&F powder coating aluminium window and ventilator shutter side hung type without sash bar aluminium section weighing .55 kg/m incl necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading ,screws, anodised aluminium fitting such as peg stay 150mm long (1 No ) hinges type B21 100mm long (2 Nos' ) suitable handle (1 No) , complete all as specified and as directed.
S& double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box,main body with stainless steel cover governing pivot made of brass other parts nade of mild steel heavy duty , complete all as specified and as directed.
M&L for Surrface excavation n. exc.30 deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m depth and not exceeding 1.5m in width in any type of soil and getting out, complete all as specified and as directed.
Returning, filling in, soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and as directed.
Removal of surplus soil not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing where directed, complete all as specified and as directed.
M&L Cement Concrete in foundation filling and mass concrete of mix 1:4:8 type D2 (40mm graded aggregate), complete all as specified and as directed.
M&L RCC M-25 (20 mm graded crushed stone aggregate) Design mix, as in foundation, including raft, footing foundation bases for columns complete all as specified and as directed.
M&L RCC M-25 (20 mm graded crushed stone aggregate) Design mix as in columns , pillars, piers, posts and struts etc.complete all as specified and as directed.
M&L for RCC M-25 (20 mm graded crushed stone aggregate) Design mix in slabs supported on walls beams and columns in floors, roofs, landings, balcony, canopies, deck slabs and in shalves and like, complete all as specified and as directed.
M&L RCC M-25 (20 mm graded crushed stone aggregate) Design mix as in Plinth beam, Roof beams, Cantilevers,bressumers, lintel over 1.5 m span complete all as specified.
M&L for TMT bars 10 mm dia & over cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or seuring with chip with deep quality confirming to FE 500/FE 500D, complete all as specified and as directed.
M&L for TMT bars 8 mm dia & over upto and including 10mm dia cut to length bent to shape required including cranking bending spirally for hoping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or seuring with chip with deep quality confirming to FE 500/FE 500D, complete all as specified and as directed.
M&L Form work to sides of concrete foundation footing base of columns and raft beams sides and soffits (if any) of plinth beams, complete all as specified and as directed.
M&L Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete, complete all as specified and as directed.
M&L Form work to soffits of suspended slabs such as roof slabs floor slabs not exc 200 mm thick, complete all as specified and as directed.
M&L Form work to edges of concrete flat, treads, window cills concrete railings, openings in concrete walls, floor & roofs and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc. 20 cm wide for rough finished flat surfaces of concrete, complete all as specified and as directed.
M&L broken stone or boulder hardcore of guage n.exc. 63 mm diposited , spread and levelled in layers n. exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement, over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 incl roughening surface of old cconcrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and as directed.
M&L for roof treatment with the following specicification - (a) Removal of existing old treatment of any type and roughening surfacesof old concrete of picking sweeping and washing down with water (b) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (c) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighting 3.5 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with Aluminium paint . The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application , complete all as specified and as directed.
M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shuttters with steel handle and steel peg stay devotailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC block etc all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 complete all as specified and as directed.
M & L for 18/19mm thick Prelaminated particleboard,exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination weight not less than 3 kg/sqm ,fixed to screws to timber frame work complete all as specified and as directed.
S&F 3mm thick sheet glass ordinary quality and glazing oil putty in square n.exe 0.5 sqm panes, complete all as specified and as directed.
S&F 4mm thick sheet glass frosted glass and glazing oil putty in square n.exe 0.5 sqm panes, complete all as specified and as directed.
S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.40mm mm and fixed with tinned tacks or galvanised wire staple complete all as specified .
S&F stainless steel 100 mm long butt hinges, with SS screws, and fixed in position , complete all as specified and as directed. .
S&F Aluminium anodised barrel tower bolts of extruded section with 200mm long bolt, complete all as specified and directed.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and as directed.
S&F EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.
Supply only flush pipe of PVC 32 mm dia for low level cistern complete all as specified and directed
S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed
S& F mild steel Peg set of four hooks size 50mm to 60mm, complete all as specified and directed.
S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges Aluminiumanodised plated, fixed with rawl plugs complete all as specified and directed.
S&F 125/110mm dia PVC (SWR) gully trap plain with grating including jointing with solvent cement, complete all as specified and as directed.
S & F PVC SWR junction single (T) equal or unequal provided with access door 110 mm bore , complete all as specified and as directed.
S & F PVC SWR junction single (T) equal or unequal provided with access door 75 mm bore , complete all as specified and as directed.
S&F in repair, Continous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap(when open) 30mm, complete all as specified and directed.
S&F 100 mm long hasp and staple , aluminium anodised , including bolt to hinge plate and fixed with screws complete all as specified.
M&L for Anti-termite treatment to the under plinth at the rate of 5 Ltr per sqm of surface, complete all as specified and as directed. NOTE:- ATT work shall be carried out through approved applicator of ATT with chemical chloripyrifos 20 EC and gurantee for ATT shall be for 10 years with amount @ 2.5% for Gurantee money for 10 Years.
M&L for Anti-termite treatment to the under plinth at the rate of 5 ltr per sqm , complete all as specified and as directed.
M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg) , complete all as specified and as directed.
M&L for Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing, and 15mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes including Cement concrete, type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub base, 25mm thick, complete all as specified and directed.
M&L for Machine cut kota slab flooring 16-18mm thickness for skirting, steps over 10 mm thick rendering in CM 1:3 and jointed with grey cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing , complete all as specified and directed.
M&L for rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc. complete all as specified and as directed.
M&L 75 mm thick PCC Type D-2 ,1:4:8 (using 40mm graded stone aggregate) in floor as in sub base, finished cement concrete surface fair and smooth without using extra cement complete all as specified and directed.
Material and labour for Sand cushioning under floors or in foundation including watering and consolidation complete all as specified and as directed.
M&L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60 mm thick grade of concrete M-35 with cement and coloured pigment, complete all as specified and as directed.
M&L For Cement concrete M-15 nominal mix in coping in benching, coping and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces complete all as specified and as directed.
M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clase 19.75 of MES Schedule part-I (2009) complete all as specified and directed. Note : Sand shall be fined sand as specifed and punned thickness shall be measured.
M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.
M&L for construction of Septic tanks for 10 users, Excavation in ordinary soil foundation in PCC 1:2:4 brick work in CM 1:4, RCC slab covers including RCC precast mahhole cover having 6mm plate embedded all round/fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc complete wells of honey combed and solid in M25 concrete including intercepting chamber,screen chamber brickwork in CM, RCC cover slab in M25 complete all as specified and as shown on drawing CEPZ/TD/013/13 Sht 1/5 to 5/5 .
M&L for construction of soakwell of size 1.20m dia and 3.0m deep, Excavation in ordinary soil foundation in PCC 1:3:6 wells of honey combed and solid in M25 concrete including intercepting chamber,screen chamber brickwork in CM, RCC cover slab in M25/RR masonry,filling with brick bats complete all as specified and as shown on drawing CEPZ/TD/013/13 Sht 1/5 to 5/5 .
Material and labour for plain cement concrete type D-2, 1:4:8 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed
Material and labour for Reinforced concrete pipes 150 mm bore , class NP3, laid and jointed complete with collars, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.
M&L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in manhole covers set in cement mortar 1:6 incl necessary formwork complete all as specified and directed .Note : steel reinforcement shall be measured and paid for seperately under respective items
M&L for TMT Steel bars 6mm to 8mm dia in reinforcement, cut to length, bent to shape required incl cranking, bending spirally of hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and as directed.
M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed.
M&L For PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) as in surface channel and drains complete all as specified.
M & L Brick work with old size bricks having crushing strength not less than 75 Kg/Sqm, straight or curved on plan exceeding 6 m mean radius with old size bricks built in cement mortar 1:4, complete all as specified and as directed.
Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and as directed.
M&L for pre-polished glazed designer ENDURA tiles, coloured, 30cm x 30cm x 8 to 10mm thick , set, jointed and pointed in neat cement slurry, pointed in white or coloured cement to match in floors over and including 15mm thick Screed bed in CM 1:4 complete all as specified and as directed.
Excavation in trenches exceeding 1.5m depth and not exceeding 3.0m in width for foundation etc for shaft,wells,cesspits,manholes,pier,holes etc nexc 10 Sqm on plan in any type of soil and getting out, complete all as specified and as directed.
Taking down steel window & ventilator with wiremesh/glazed shutter (without taking of shutter from frame) not exceeding 1.5 Sqm each complete all as specified and directed.
S&F mild steel framed work such as grills,grating etc with ends of bars shoulder and or riveted or forged into spikes,framed guard bars ,barred iron doors,ladders,framed balusters,walk ways ,ailings framework of water tank and similar work conforming to Fe 410-0,Fe-310-0 complete all as specified and as directed.
Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.
All as per item No 143 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.
All as per item No 143 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.
All as per srl item No 143 here in before but one bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size complete all as per specified and directed.
M&L for Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.
Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.
Supplying & Fixing socket outlet 6 amps 5 pin flush type, 240 volts, complete all as per specified and directed.
Supplying & Fixing switch piano flush button single pole one way 15 amps 230 Volts, complete all as per specified and directed.
Supplying & Fixing socket out let, 5 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 240 volts, complete all as per specified and directed.
S&F LED lamp of capacity 9 watts complete with all accessories base (ISI marked) complete all as per specified and directed.
Supplying & Fixing bell multi music type 230 volts complete all as per specified and directed.
S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.
S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.
S&F in replacement LED tube light fitting 20w,230v, including LED 4 feet Batten type fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.
S&F in replacement sheet metal powder coated SPN DB double door 8 way having provision for one No incoming MCB SPN and outgoing MCBs SP AC 230 volts 50 Hz AC supply having protection IP43 IK-09 with copper bus bar rated 200 amps neutral link earth bar complete all as per specified and directed. Note :-MCB,s Shall be measured and paid seperately in relevant item.
S&F in replacement MCB isolator 32 Amps 240 volts with 10 KA breaking capacity of 'C' series in distribution boards complete all as per specified and directed.
S&F in replacement MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards complete all as per specified and directed.
S&F in replacement single pole and neutral enclosures with two pin and earth plug and socket complete with one single pole 230 volts MCB 20 amp complete all as per specified and directed.
S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.
Suupply ,fixing, & testing water heater storage type with multifunctional safety valve,electric operated 230 V single phase complete including one No of heating element ,automatic,thermal cut out,fusible plug,anti vacum sys,built in presser release valve,thermostat,rust proof powder coated body,indicator lamps and all safety advices as per E-in-C's branch technical intructions and of capacity 25 litres including with suitable and making disturbed surface complete all as per specified and directed.
M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire .)
S&F of exhaust fan heavy duty plastic body 200mm sweep with all accessories connecting up with twin core twisted flexible copper conductor cable from ceiling rose to exhaust fan including necessary fixing arrangement for proper fixing in wall complete all as per specified and directed.
S&F in replacement M& L for repair to ceiling fans of 1200 mm / 1400 mm sweep by replacing unserviceable ball bearing and suitable capacity of condenser including necessary greasing to the bearings complete all as per specified and directed.
Supplying ,laying and testing cable XLPE insulated,screen,PVC bedded galvanised steel strip or wire armoured,electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core complete all as per specified and directed..
Amrik Construction co
Ashoka Engineers
KULBHUSHAN AGGARWAL
HARI OM ENTERPRISES
Substantial Const. Co.
Ms International Engineers
M/S GUPTA TRADING CO
RATTAN CHAND CHANDAN AND CO
Standard engineers
M/S SHRI RAM BUILDERS
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .