8297 ADDITION ALTERATION TO MUTTON POINT AT OLD DGNP BUILDING WORKERS TOILET OF C NO 62 AT NAVAL DOCKYARD AND ADDITION ALTERATION OF INDIAN NAVY ONLINE EXAMINATION SYSTEM INOES WORK STATIONS TO AUGMENT TEN ADDITONAL NODES AT DEC ANGRE FIRST FLOOR LEF

Amount

Taking down cement plaster on brick or stone walls etc. including racking out joints hacking for key, scrubbing down with water etc and removing outside from the MD land.

Taking down chowkats or frame with shutter (without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified and as directed.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

Demolition of plain cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

Demolition of Stone slabs, floor hearth and tiles of any description or thickness in floors, aprons etc and removing off the premises and taking the debris outside MD land.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and as directed.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors including taking down existing 15mm bore, GI tubing and connections complete all as specified and as directed.

All as per Srl item 9 here in before but 20mm dia medium GI Pipe

M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6) complete all as specified and as directed.

All as per item No 11 above but half brick thick wall built in CM 1:4.

M&L for rendering/Plastering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even complete all as specified and as directed.

M & L 150 mm thick Plain Cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in hardstanding complete all as specified and as directed.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick , set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed.

M & L for granite stone (of any type) slab 20mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed.

M & L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item No 18 above butbut as in skirting /riser / dado etc.

S&F powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL/HINDALCO/INDALCO. Note :- (i) Item shall be paid as per weight of aluminium section. (ii) the rate quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iii) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

S & F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed.

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and as directed.

S&F Extrude aluminium anodised alloy handles, fabricated type 200mm size complete all as specified and as directed.

S&F 4mm thick figured glass,pin headed type, in squares n exc 0.5 Sqm in each pan complete all as specified and as directed.

S&F 12 mm thick Medium density fibre board, exterior grade, fixed to timber/ Aluminium frame work with screws

S & F white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified.

S & F white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified complete all as specified and as directed.

S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and as directed.

S&F 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. complete all as specified and as directed.

S & F white glazed earthen ware vitreous Oval type china wash hand basin of size 600x700 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and as directed.

S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs complete all as specified and as directed.

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends

S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

M&L 75mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs complete all as specified and as directed.

S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and as directed.

S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and as directed.

S&F 110mm dia PVC ( SWR) grade double T with access doors including fixing clips complete all as specified and as directed.

All as per item No 75 above but 75mm dia

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with silvent cement complete all as specified and as directed.

S&F in repairs of vitreous china urinal, half stall type complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed.

S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet, outlet etc complete all as specified and as directed. .

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S&F 75mm dia CP shower rose swivel type wityh & incl 460mm long brass CP heavy duty, fixed in repairs.

M&L for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. M.S.frame shall be covered with heat moulded design with colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified.

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed.

S&F Door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE)

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing Fe-410W (Gde E-250) quality- B (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

S&F for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding etc complete all as specified and directed .

Supply & Installation of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof vering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item No. above but plain steel sheet with 0.5mm thick as in flashing boards and ridges.

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer complete all as specified and directed.

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width of girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F 12mm thick ply wood, grade BWP type BB, fixed with screws to timber frame, as in panelling complete all as specified and directed.

M/L 1.5mm thick Decorative texture finish laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker,s instuctions complete all as specified and directed.

S&F 1st class hard wood moulding as in cornices, joints of wall panelling board etc sectional area not exc 6 Sq cm including necessary french polishing complete all as specified and directed.

Ditto all as per item No 20 above but sectional area exc. 25 Sqcm & n exc. 50 Sqcm.

Complete removal of exising treatment by washing, rubbing down and stopping of paints with putty and chalk whiting and applying two coats of luster paint over a coat of alkali resistant primer on walls complete all as specified and directed.

19mm thick pre-laminated particle board, one side decorative lamination interior grade, fixed in aluminium/ wooden frame work complete all as specified and directed.

M&L for vetrified ceramic tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the dark shade tiles, with and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

Taking down carefully old U/S point wiring copper/Aluminum (sockets/power) complete with sockets PVC casing caping and PVC/steel conduit complete etc removing material to store for keeping in safe custody and making good to disturbed surfaces as directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, (Make: Havells/ Finolex/ Plaza) drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC moulded box with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One 5A flush type switch socket point on independent board

One 5A flush type switch socket point on same board board

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including PVC modular box with cover plate complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza (c) Switch socket measured & paid separately.

M&L for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm PVC conduit with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 4.0sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete necessary electric connection for each workstation point comprising of 03 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/Plaza/Gloster

S & F modular switch 1 way 6A, 1 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular switch 1 way , 16A, 1 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F modular socket 6/16A, 2/3 pin, combined 2 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F lamp holder PVC/polycarbonate insulated body type complete all as specified and directed. Make: Anchor/Roma/Legrand.

S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed. Make: Anchor/Roma plus/Legrand

S&F in repair of vertical type TPN DB 8 Way, 440 V with 250A Copper busbar, double door type, IP43- IK 09 protection suitable for housing MCB's all as specified and directed. Make: Legrand cat No 5077 32 or equivalent cat No. in Seimens/C&S.

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 507730 or equivalent in siemens/GE (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5077 37 or equivalent in siemens/C&S

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 54 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5077 38 or equivalent in Siemens/C&S

S & F MCB Four Pole, 125 Amps, 10KA, 'C' Curve , 415V complete all as specified and directed. Make: Legrand cat No 5087 05 or equivalent Cat part in Seimens/GE.

S & F MCB SPN 40 to 63 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F MCB DP 40 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make : Legrand/Seimens/GE

S & F MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts,10 KA including making connection complete all as directed.Make: Legrand/C&S/Havells/Benlo

M&L for sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

M&L for sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

M&L for sub-main wiring with 4 runs of 10.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

S & F of Rigid non metallic PVC conduit ( ISI marked) medium grade, 20 mm dia size inclusive of MS junction boxes for telephone / TV/LAN cables inclusive of all fittings such as tees, bends, elbow, reducers, bell mouth tube ends etc and all fixing accessories such as couples, bolts, nuts, saddles, pipe hooks etc including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

Supply and fixing wall/surface mounted 10W LED, 2 feet batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed. Make : C&S cat part No. LTTB2F10WLED/W or equivalent in CG / Wipro / Bajaj / Philips

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) , or equivalent cat part in Crompton/Wipro /Philips

S &F 18 Watt 4 FT LED tube light fitting integrated Batten T5 RETROFIT TUBELIGHT: TARIKA SERIES indooor light decorative alluminiumextruded POLYCARBONATE LED T5 RETROFIT TUBE. Make- C & S CAT PART NO LT4F18WLEDT5/WD,or equivalent cat part in Crompton/Wipro /Philips

S & F exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ khaitan

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply, install, testing and commissioning wall mounted Split inverter AC, electric driven, 2.0 TR capacity units indoor/ outdoor, single phase, 240V, 50 Hz complete with cordless remote control unit, fitted with high quality rotary compressor and with in built air ioniser and plasma filter for better indoor air quality with 5 star rating (EER 3.5) including inbuilt of voltage stabiliser complete all as specified and as directed. Make: Voltas/Hitachi/Mitsubishi/ Daikin Notes:- Rate of supporting brackets for outdoor units is deemed to be included in rate quoted.

S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A all as specified and directed. Make: Legrand cat No 5078 11 or equivalent Cat part in Seimens/GE.

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level connected and incl galvanised earth lead wire of 4mm dia by means of nuts & bolts, check nuts and wassher of galvinsed incl PCC (1:2:4) type B-1 cover reinforced with XPM (weight not less than 4 kg/sqm) and frame of angle iron 25mm x 25mm x 3mm excavation and earth work in any type of soil, charcoal dust, salt light grade GI watering pipe 20mm dia with funnel and wire-mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distrubution board complete all to as shown in electrical plate No 3 of MES sch 2009 (part-I) connected main switch board all as specified and testing on completion.

Supply & Fix LED Light 36watt, Power coated pressure die cast aluminium SMD LED with integraed lens complete all as specified directed. Make- C&S Cat part no- LTESSE36WLED (INDUS-E SERIES) or equivalent Cat part in Surya / Philips / Bajaj / Havells

S & F of Rigid non metallic PVC conduit ( ISI marked) medium grade, 20 mm dia size inclusive of MS junction boxes for telephone / TV/LAN cables inclusive of all fittings such as tees, bends, elbow, reducers, bell mouth tube ends etc and all fixing accessories such as couples, bolts, nuts, saddles, pipe hooks etc including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

S & F of MS seamless steel tube down rod with ball socket for hanging th light fitting and laying up to ceilling rose twin core 0.5 sqmm copper conductor flexible type from fan complete all as specifed and directed.

Gaurav Enterprises

sai construction

SAI SIDDHI CONSTRUCTION