Execution of Creation of 200KVA DT Sub Stations alongwith HT LT Network Improvement near JK Bank Industries Phase III Improvement of HT LT Network of Feeder No. 7 by way of replacing rotten Wooden poles Creation of 200KVA DT Sub Stations alongwith LT

Amount

Supply, Installation, Testing & Commissioning of (SITC )

SITC of 200 KVA,11/0.433,3 phase Distribution Transformers with Bimetallic Terminal Connectors Energy efficient Level-2,(Al. wound) ONAN, Filled with T.Oil as per IS 1180 Part-I of 2014.

SITC of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

SITC of Lighting Arrestor Set Heavy duty, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

SITC of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

SITC of 11 KV D.O. Set (fuse 3-phase 200A) as per Relevant IS.

SITC of Channel Iron and Angle Iron of Sizes Galvanized as per IS , including Trasformer Pad-drawing of transformer pad to be provide by SDO while Execution.

SITC of 11KV Disc Insulators (Polymer Type) 45KN Complete with fittings.

SITC of Nuts and Bolts full thread of sizes Galvanized as per IS

SITC of Earthing of Substation-Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 75mm*10mm & 50mm*6mm for connection of transformer body, G.O Set & lightening Arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover.

SITC of 11 KV Pin Insulator(polymer) with pins (5KN)

SITC of LT Distribution Box for 63/100/200/250KVA DTR with MCCB for incomer & SFU's for outgoing Circuits.

SITC of LT, 3-phase,4 wire Trivector Meter with CT with meter box

Painting to poles with:- (Full Job) i) one coat of Red Oxide paint ii) two coats of Alum paint , well finished

SITC of 1.1KV Grade PVC Insulated Stranded Conductor FIRLS Type Cable 185 mm2 Single Core. ( of Make Havells, Polycable , Glaster, paramount).

SITC of S.L. Clamps 185 mm2.

SITC of Al. Thimbles185 mm2.

SITC of LT Fuse Set.

Cement bottoming of poles (1:2:4 Mix as per REC Standards 0.5M3 per Pole). (full Job)

SITC of Danger Plate With Clamps as per Standards.

SITC of Anti Climbing devices(GI Barbed Wire) 3.5 kg per Pole. Binded With Clamps.

SITC of Sundry items like Aluminum lugs, Jumpers,Binding tape

SITC of Pole Collars/Clamps 50x8mm flate iron (GI as per IS)

HT Network of the substation (Supply, Installation, Testing & Commissioning of)

SITC of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 33).Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

SITC of Channel Iron X-arm 75x40x6mm V Cross Arm (Galvanized as per IS ))

SITC of Ch. Iron incluging Clams & Braces , (Galvanized as per IS)

SITC of Nuts and Bolts full thread of sizes Galvanized as per IS

SITC of 11KV Pin Insulators with Pins (5KN) (Set)

SITC of Danger Plate With Clamps as per Standards.

SITC of Anti Climbing devices(GI Barbed Wire) 3.5 kg per Pole. Binded With Clamps.

Painting to poles with:- (Full J ob) i) one coat of Red Oxide paint ii) two coats of Alum paint , well finished

Pole Earthing complete by GI pipe 40 mm or GI rod 20 mm, 2.50 meter long , through GI strip (25*3mm) to each HT pole including supply & weldond Of GI channel 70*40*150 on pole for earthing connection.(Full J ob)

Cement bottoming of poles (1:2:4 Mix as per REC Standards 0.5M3 per Pole). (full Job)

SITC of Pole Collars/Clamps 50x8mm flat iron (Galvanized as per IS )

LT Network of the substation (Supply, Installation, Testing & Commissioning of)

SITC of S.T. poles 8.0 Meter long swaged Type conforming to ST 410 SP-15 , IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5ms (SP 15).Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

SITC of Danger Plate With Clamps as per Standards.

SITC of LT Shackle Insulator with G.I. U-Clamps and pole collar

SITC of ACSR 50mmSq conforming with the Indian Standard specification IS: 398 (PLI)-1976 and IS : 398 (PL II)- 1976 or the latest version thereof.

SITC of 1.1KV Grade PVC Insulated Stranded Conductor Un Armoured Sngle Core XPLE FIRLS Type Cable 300mm2 Single Core. ( of Make Havells, Polycable , Glaster, paramount).

Pole Earthing by G.I. Pipe 40 mm or G. i. Rod 20 mm, 2.5 meter long through G.I Strip of Stranded size.

SITC of Anti Climbing devices(GI Barbed Wire) 3.5 kg per Pole. Binded With Clamps.

Painting to poles with:- (Full J ob) i) one coat of Red Oxide paint ii) two coats of Alum paint , well finished

SITC of Nuts and Bolts full thread of sizes Galvanized as per IS

SITC of Aluminum Jointing Sleeves

Cement Bottoming (1:2:4 mix 0.5M3 per pole) (Full J ob)

M/S BILAL ELECTRICALS

M/S PEARL ENTERPRISES

WULAR INFRASTRUCTURE PVT LTD