SPECIAL REPAIR TO LIVING IN ACCN OFFICERS MESS AND

Amount

S&F aluminium (powder coated) frame for sliding windows, side hung windows and ventilators with necessary joining cleats, fastener etc to fix in existing opening complete Notes : (i) Thickness of powder coating (epoxy polyester) shall not be less than 50 micron. (ii) Shade/tint of powder coating (epoxy polyester) shall be as approved by GE. (iii) Gaps between frame and masonry/cill/lintel to be filled with silicon gel for water tightness. (iv) Rates quoted includes making good of jambs, soffits and cills etc. (v) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2. However size of frame shall be per actual site requirement complete all as specified and as directed.

S&F aluminium (powder coated) sliding glazed shutter in three track one jallie and two glass of suitable size with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and locking arrangement at both end all as specified and as shown and drawing. Notes : (i) Glass filling in panels to windows shall be measured and paid for separately under respective item of this schedule as supply only (ii) Thickness of powder (epoxy polyester) coating shall not be less than 50 micron (iii) Shade/tint of powder coating (epoxy polyester) shall be as approved by GE. (iv) Frame shall be measured under respective item of this schedule. (v) Aluminium section shall be as per drg No. CE/ALD/TD-194 sheet No. 1/2 & 2/2

S&F aluminium (powder coated) window and ventilator shutters, side hung type, without sash bars, aluminium section weighing not less than 0.55 Kg/Metre including clips, rubber packing aluminium snap beading, screws, fittings (each shutters) such as peg stays 150 mm long, hinge type B-21 100 mm long (2 Nos), 150mm long D type handle (one number) and tower bolt 150mm long (one number) (Notes : (i) Glass panels to windows/ventilator shall be measured and paid for separately under respective item of this schedule as supply only. (ii) Thickness of powder (polyester) coating shall not be less than 50 micron. (iii) Shade/tint of powder coating (epoxy polyester) shall be as approved by GE. (iv) Frame shall be measured and paid for separately under respective item of this schedule. (v) Quoted rate shall deem to included cost of alumiumum powder coated builder hard ware.

Supply only 5.50 mm thick sheet glass, ordinary quality, in square exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 4mm thick figured glass, pin head type not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F brass chromium plated shower rose with swivel joints with shower arm 15mm size,195mm long complete all as specified and as directed.

Supply and fix in repair chromium plated brass hand shower (minimum 125mm long) (heavy duty) heat faucet) for EWC with flexible tube 1.5 metre long and stand & connection to 15mm bore iron pipe complete all as specified and as directed.

Supply and fix in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450 mm PVC reinforced connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications complete all as specified and as directed.

S&F 15 mm bore bib taps, with wall flange long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe or for brass furrel complete all as specified and as directed.

S&F Chromium plated stainless steel (Grade S-304) (heavy) grating minimum 3 mm thick of size 125mm dia for trap complete all as specified and as directed.

S&F in repair chromium plated brass fancy type hand shower(jet spray) (Health faucet) ABS body (minimum 150 mm long) arm with 8 mm dia, 1.00 m long flexible PVC tube and hook complete all as specified and as directed.

S&F Chromium plated stainless steel towel rail with lower hanger with hooks fixed to wall with chromium plated brass screws 600mm long between flanges complete. Note : Stainless steel towel rail cat Part No. AHS-1581 of make 'Jaquar' or equivalent model of make specified in Appendix 'B' to particular specifications complete all as specified and as directed.

Supply and fix in repair 600mmx450mm and 6mm thick bevelled edge looking mirror mounted on 6mm thick backing commercial plywood fixed with CP plug with chromium plated brass screws and cup washer fixed on wall complete all as specified and as directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and as directed.

S&F Chromium plated brass soap dish (oval shape) to walls (size not less than 125mm long) complete all as specified and as directed.

S&F brass chromium plated mist wall mixer (hot and cold) non telephonic fixed to wall for bathroom. Note : Brass chromium plated wall mixer cat Part No. F-2004405 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications complete all as specified and as directed.

Supply and fix in repair kitchen plate rack made out 0.63mm thick stainless steel ( Grade S-304) sheet, SS screws round pipe of minimum size 600mm x900mmx250mm including fixing with rawal plug and screws complete. Note :- Plate rack shall be of make : Blue star, model BSKPR-312 or equivalent model of make specified in Appendix 'B' to particular specifications complete all as specified and as directed.

Supply and fix in repair stainless steel kitchen sink with drainage board made of 1.00mm (minimum) thick stainless steel (Grade S-304) sheet with plug washer including bedding in cement mortar to wall or including fixing on RCC platform connecting union to pipe overall (minimum ) size 915mm x 460mm with bowl (minimum) size 410mmx330mmx160mm complete including waste coupling CP, sink mixer wall mounted with 150mm long swivel spout connecting legs & wall flanges, and waste pipe complete all as specified and as directed. Note : Sink mixer cat Part No. F-2004501 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications.

S&F 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of both side plain white colour rigid and glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides top and bottom and shelves inside the cabinet complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Modular kitchen accessories i.e. basket, cutlery baskets, fittings, handles, hinges, will be measured and paid for separately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F 18mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Handles, hinges, will be measured and paid for separately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Colour and design of prelaminated portion shall be as approved by GE. (iv) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F 12mm thick celuka PVC sheet minimum 600 Kgbm density grade 1 quality of one side plain white colour rigid and glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet back complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Modular kitchen accessories i.e. basket, cutlery baskets, fittings, handles, hinges, will be measured and paid for separately as supply only under respective of this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

Supply only auto closing hydraulic (soft closing) chrome finish stainless steel hinge openable at 110 degree complete all as specified and as directed.

Supply only 100mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete all as specified and as directed.

Supply only 200mm long stainless steel (grade S-304) handle fancy type polished bright chrome finish complete all as specified and as directed.

Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model.

Dismantling of cooking plat form with supporting RCC slab and removing spoil out side MD land. Note : Retrieved reinforcement shall be contractor property and necessary amount as per schedule of credit shall be deducted from the contractor dues.

Taking down chowkats or frames exc 1.5sqm but not exc 4 sqm each (without taking off shutters from the frame) & removing from site complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sqm each (without taking off shutters from the frames) & removing from site complete all as specified and directed

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

Taking up or down 15 mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

M&L Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting not exceeding 10 cm girith for concealed water tubing or concealed conduit wiring, etc. complete all as specified and directed.

S & F drapery rod 25 mm dia with PVC pipe over MS conduit including curtain rings suitable for 25 mm dia pipe & side cups with brackets including fixing arrangements with drilling holes etc complete of approved quality and colour complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165

Disconnecting existing tanks of capacity exc 250 & n.exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position after cleaning and repairing etc. complete all as specified and directed.

S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer, white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part I complete all as specified and directed

S&F Flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick of first class hardwood Glazed and skeleton shutters, open rebated and prepare to receive glass, gauge, etc., (with sash bars) size of members of shutters as specified in SSR part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F MS flat iron as in hold fast etc and similar work including making shape, drilling holes etc, confirming to FE 290 Ged E-165

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in bed plate for fixing holdfast etc all as specified and directed.

S&F for Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames all as specified and as directed.

S&F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames as in repairs all as specified and as directed.

S&F for aluminium anodised barrel tower bolts of extruded section of length of bolt 200mm all as specified and as directed.

Supply only butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type all as specified and as directed.

S&F for aluminium handles, cast type, anodised of size 100mm all as specified and as directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of cement base paint on wall surfaces

M&L for Preparation of old distemper surface and applying one coat oil bound distemper on wall surfaces white or tinted

All as per item No - 55 above but one coat of Oil bound distemper on ceiling surface complete all as specified and directed.

M&L for Complete removal of existing finishes on wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for Preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfacesand applying one coat of steel painting complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coat of steel paint including primer on steel surfaces complete all as specified and directed.

M&L for surface of any discription not otherwise described over 10 cm width or girth on new untreatd surface with two coasts of synthetic enammelled painting over one coat pink primer on weeden surface complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 of using class designation 100 of bricks in lieu of 75 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished in ceiling complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surface of wall and applying two coats of cement base paint over cement wash with white cement complete all as specified and as directed.

M&L for Preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for Preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer Birla white care Putty on wall obtain smooth finish etc including balance area complete removal complete all as specified and as directed.

M&L for complete removing of existing treatment on wall surface and applying two coat of OBD over 3 mm thick wall birla white care Putty on wall to obtain smooth finish etc complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed..

M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat complete all as specified and as directed.

S&F 300x300 mmx7-8 mm thick ceramic non skid coloured tiles in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 15mm thick screed bed in cement morta 1:6.(Make- Johnson/Orient) complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified and as directed.

M&L vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including rendering 10mm thick in CM (1:4) complete all as specified and as directed.

M&L granite (of any type) 20mm thick machine cut, bedded and jointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing complete all as specified and directed.

S&F in repair rubber bead for wooden door complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m complete all as specified and as directed.

M&L 75mm thick for PCC 1:3:6 type C-1 as in plinth protection , complete all as specified and directed

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Demolition of plain cement concrete in any position including Tar felt or HP tiles in cement mortar bedding etc complete all as specified and directed.

M&L 25mm thick (average) PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof padding, benching existing roof slab laid to slope as per existing or as directed including finished surface even & fair complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:4) over concrete surfaces of roof, mixed with 5% liquid water proofing compound by weight of cement or as per manufacturers instruction including finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for Provision of Roof treatment consisting of the following items and operations :- (a) Cleaning the roof surface from dust / dirt and any other foreign materials and applying a coat of bituminous primer @ 0.30 litters per square meter uniformly after the surfaces fully dried complete all as specified and directed. (b) M&L for applying a coat of hot blown bitumen grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed. (c) M&L for APP based polymeric water proofing membrane minimum weight 3 Kg / Sqm and minimum 3mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor including cutting & chasing 100mm x 75mm in the parapet to insert the APP membrane and sealed with and including PCC (1:2:4) type B-0 (Mixed with and including polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacturer’s specification). Membrane shall be laid with 100mm side/end lap on prepared surfaces as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer. Note : PCC(1:2:4) shall be measured and paid separately.

M&L for Preparation of new APP based polymeric water proofing membrane surface applying one coat of aluminium paint complete all as specified and directed.

M&L Cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20cm girth for concealed water tubing or concealed conduit wiring, etc .complete all as specified and directed.

S&F in repair for aluminium anodized door (Partly panelled) with 3 mm thick ACP board interior grade both side laminated fixed with adhesive or rubber beads and aluminium section weight not less than 0.55 kg/RM with sliding system on top ad bottom including door closer and door licking system complete with all fitting complete all as specified and directed.

S&F of PVC wall panelling in double layer sheet for panel & inner framework. The strips should have in their centre a grave of 6mm & 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval between two PVC strip. The PVC strips shall be fixed to the wall using steel screws through the groove in the PVC strip by using PVC fasteners panels are joined through solvent content. Wall panelling S side prelim sheet complete all as specified and directed.

S&F 12mm thick laminated exterior grade novopan board, best quality and fixed to aluminium frame clips in any size in each pane complete all as specified and directed

S&F rebated mortice aluminium lock vertical type size 100,mm with 4 levers complete all as specified and directed

S&F aluminium door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed

S&F sun control film over a glass area of each is as required at site and colour of the film as approved by users complete all as specified and directed.

S&F 200 mm dia fancy type swiwel shower rose fixed to ferrule including 300 mm long shower pipe and complete all as specified and directed

S&F in repairs EWC including flushing cistern and flush pipe and complete all as specified and directed.

S&F in repair shower panel made of anti-finger print stainless steel body, inbuilt ABS top shower with 60 nozzles+ water fall, 2 moveable ABS body massage jets, head shower with flexible hose , shelf, brass faucet Make : Jaguar Cat Part No : JPL-SSF-ST88158B or equivalent complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the earth pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any variation in quantity shall be adjusted

M&L for Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistandard copper conductor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metallic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealing conduit and making good to match with existing finish.

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule.

M & L for point wiring with PVC insulated, PVC unsheathed cable single core, nominal area 1.5 sq mm FR with stranded copper conductor 1100 volts grade drawn into and including rigid PVC conduit (concealed) 19 mm internal dia with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sq mm unsheathed copper conductor earth wire connected to earth dolly including metal junction box ,grid plate, base plate suitable for modular switches, sockets, regulators. For One light/fan/bell point controlled by one switch single pole one way. Note- (1) The rates of chase cutting on wall concealing conduit and steel terminal boxes are included in the unit rates.(2) colour code of wire will be strictly followed , Red for Phase , Black for neutral and green for earth wire(3) Switches & sockets shall be measured and paid for separately.

All as per item No. 101 here-in-before but one 3 pin 5 amp switch socket out let independent

All as per item No -101 here in before but one 3 pin 5 amps socket outlet on the same board with other switch complete

All as per item No. 101 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4.0 sq mm size as earth conductor for one 16 amp switch socket outlet on independent board

Supply and fix switch modular flush 6A single pole one way ISI marked (One module)

Supply and fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked

Supply and fix modular sockets 6 Amp 2 in 1 2/3 pin combined (Two module)

Supply and fix modular sockets 16 Amp 2 in 1 3/5 pin combined (Two module)

Supply and fix ceiling rose surface bake light 60x25mm three terminal

Supply and fix electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type

Supply and Fix calling bell AC ding dong 220 volt multi music type as specified and directed

Supply and fix Modular bell push AC 220 volt single phase

Supply and fix AC starter unit consisting of one 25 Amp capacity starter, one 240 volt 25 Amp 10 KA SPN MCB, one 25 Amp sockets and one 25 Amp plug top prewired of make North west/Anchor/Legrand/complete all as specified and directed

Supply and fixing in replacement LED fitting of 20 watt 4 feet long Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack including the taking down old u/s one complete all as specified and as directed Make : Havells, Cat No LHEXAPP7IN1W020 or Equivalent in Crompton/Bajaj/Philips.

Supply and fixing in replacement LED fitting of 9/10 watt 2 feet long Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack including the taking down old u/s one complete all as specified and as directed Make : Havells, Cat No LHEXBLP7IN1W009 or Equivalent in Crompton/Bajaj/Philips.

Supply and fix in replacement decorative LED fittings wall mounted with LED lamp opal glass shade static look with premium synthetic and metal combination including 10 watt LED bulb including connection and fixing arrangement Make:Havells Cat No.LHFOECE1TZ1O014 or equivalent in Philips/Bajaj/CG

Supply and fix in replacement bulkhead fitting environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire ,IP-66 protection comprising of high brightness LED Make :Havells cat part No- LHEXCGP7IN5W006 or equivalent of other make Philips/Crompton

Supply and fix Factory made sheet metal enclosure distribution boards, double door, suitable for mounting isolator fixing MCBs conforming to IS & BS with 200 Amps rating copper bus bar, SP and N, 8 ways, 240 volts. Note : MCBs shall be measured and paid for separately under respective item of this schedule.

S&F MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs

S&F MCB, SPN, 230 volt, 35 to 63 Amp rating, 10 KA, 'C' series fixed in DBs

Supply and fixing of Exhaust fan, copper wound winding of 300mm sweep,1400 RPM, 750 CMH,230 volts,50 Hz, single phase complete with louvers, making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multi core, PVC insulated copper cable from ceiling rose and making good the disturbed surface with existing colour matching complete all as specified and directed :Make :Bajaj Model No FRESHEE MK II or Equivalent in Usha/CG/Havells .

S&F OF Fresh air fan, single phase 230 volts of size 200 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose and making good the disturbed surface with existing colour matching complete. Note :- Fan shall be of Make-Bajaj Model: MAXIMA DX or equivalent model of Havells/CG/Usha

Supply & fix ceiling Fan ,230 Volts, 1200mm sweep,340 RPM, 210 CMM,230 volts,50 Hz, single phase, star rated complete with all accessories for hang and connecting with 3 run of 1.5 sqm, multicore, PVC insulated copper cable from ceiling rose as specified and directed. Note :-i. Fan shall be of Make-Bajaj Model: EXCELSTAR or equivalent model of Havells/CG/Usha.ii. taking down old u/s one and depositing the same in MES store yard & Old unserviceable fan will be included in condemnation board.

Taking down carefully existing ceiling fan and M&L for ri-fixing the same with nuts, with lock type split pin spring & plate washers etc after paining and oiling/greasing as specified and directed

Supply and fix geyser 25 Ltr capacity water container with 5 Star rating comprising heating element , thermostat, indication lamp, inlet out let pipe, PVC connection, angle valve including GI pipe connection from overhead tank to inlet pipe

S&F recess mounting 2’ x 2’ LED fitting of 36 watt with white powder coated CRCA housing with high power LEDs with aluminium fron frame with flat white high transmission acrylic cover, 6500k, lumen/watt, 240 volt 50 Htz, all as specified and directed. Make : Philips/Havells/Syska

Supply, install, testing and commissioning of maintenance free chemical earth pit (Tripod Chemical Earthing) made of “Grid” chemical earth enhancing, non ferrous compound containing no carbon or graphite which include (i) Three Nos 3000mm long 50mm dia copper bonded “Earth Electrode” prefilled with compound and stainless steel fasters, HDPE lockable earthpit cover cum inspection chamber along with 150 Kgs of Earth Enhancement, high conductive, corrosion resistant, non ferrous compound containing no carbon or graphite including bore hole of 150-200 mm and depth upto 3.3 mtr (approx). (ii) Copper earthing strip 25x3mm for interconnection of all three pits alongwith necessary clamps and nuts bolts. (iii) Any other accessories including design modification to achieve the required earth termination rod resistance valve below 1 ohms or as per the OEM/International Standard recommendation (iv) Mark earth result and date with paint, Make – Aes Gel Earthing Solution/Indelac/Tercel/Erico ohms or as per the OEM / International Standard recommendation. Make: Aes Gel Eathing solutions/ Indelec/Tercel/ Erico .

Supply and Laying of down conductor ISI marked 70 sq. mm PVC insulated copper flexible conductor including both end termination, suitable size cable clamps cooper thimbles etc. from Equipment to the Earth pit terminal / Earth test link complete all as specified and directed.

S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos. 8mm dia 25 mm long hex head screw complete all as specified and directed.

Supply installation commissioning and testing hi wall split units indoor and outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rated, invertor type and capacity 1.5 ton including breaking necessary hole in wall any type for fixing indoor and outdoor unit and making good disturbed surfaces with cement mortar and painted to match existing surface, all as required including necessary connection complete all as specified and directed. Make : Voltas/Paikin/Hitachi/LG/Blustar/Carrier.

M&L for laying of copper tubing of dia ½” including insulation with heavy duty rubber foam and brazing work complete all as specified and directed by Engineer-in-Charge.

M&L for laying of copper tubing of dia ¼ ” including insulation with heavy duty rubber foam and brazing work complete all as specified and directed by Engineer-in-Charge.

S&F PVC insulated stranded 4 core flexible copper cable of size 2.5 sqmm 1100 volt grade complete all as specified and directed by Engineer-in-Charge.

S&F low density polyether pipe (LDPE) of pressure rating 6Kg/cm2 drain pipes of size 40 mm from indoor unit to exist point as per design including accessories clamps fasteners complete all as specified and directed by Engineer-in-Charge.

M&L for outdoor unit stand for wall mounting type or floor mounted complete factory made as recommended for make Airconditioner and approved by Engineer-in-Charge

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled outdoor type, Bult-in Thermal Overload protection, low & high voltage cut-off protection & designed for input variation between 150 V to 285 V with output voltage stabilized at 230 V with accuracy of ±2.5% and capacity 5 KVA Make : V Guard (Model No : VND500)/Bluebird (Model No : BA514A) or equivalent.

S&F sheet metal enclosure with socket and plug top and MCB single pole and neutral enclosure with two pin and earth plug and equivalent.

Sub main wiring with 2 run of single core PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FR, 1100 Volts grade cable drawn into and including rigid non metallic PVC conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 Sqmm FR 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note : (a) Two runs of 4.0 Sqmm cable and one run of 4 sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealing conduit and making good to match with existing finish.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S SWASTIK BUILDERS

HIMANSHU TRADERS

M/S KESHRI WORKERS

Mohit Enterprises

MOHAMMAD RIZWAN CONTRACTOR

R K CONSTRUCTION COMPANY

M/S SATISH KUMAR