Construction of Health Sub Centre building at Badhani Distt. Hamirpur HP

Amount

Excavation in foundation trenches etc in all kind of soil such as pick work, jumper work and blasting work of any other mixed type of soil in dry or saturated conditions including pumping, bailing out water upto all depths including stacking the excavated soil as directed by Engineer-in-charge and then returning the stacked soil in 15 cm. (fifteen centimetres) layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts, disposed soil be leveled and neatly dressed as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron in frame of minimum section of 30x30x5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height of propping and centering below sporting floor to ceiling and removal of the same for insitu-reinforced concrete work as per direction of Engineer- in -Charge, including entire carriage of materials in all leads and lifts and other incidentals in.

In foundation, footing, bases of columns etc. and mass concrete etc.

Vertiacal surface such as wall (any thickness) partition and the like including attached pilasters buttress and string courses and the like

Flat surfaces such as soffits of suspended floors, roofs, landing, chhajja and the like etc.

Columns, pillers, posts and struts ( Square rectangular or polygonal in plain) .

Staircases with sloping or stepped soffits excluding landing.

Beams, cantilevers, girders and lintels, sides and soffits of beams, beam hunching, cantilevers, girders brussemers and lintels for all depth and heights from floor.

Edges of slabs and brakes in floor and walls.

Providing and laying cement concrete 1:4:8 ( one cement : four sand: eight graded crushed stone aggregate 40mm(forty millimeters nominal size) and curing complete excluding cost of form work foundation and plinth as per direction of Engineer- in -Charge, including entire carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 ( one cement : six sand: twelve graded crushed stone aggregate 40mm(forty millimeters nominal size) and curing complete excluding cost of form work foundation and plinth as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying damp proof course 38mm (thirty eight millimeters) thick with cement concrete 1:2:4 (one cement :two sand: four graded crushed stone agg. 12.5(twelve point five) nominal size) and curing complete as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals as per direction of Engineer- in -Charge, including entire carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) eight / hundred using 1.70 Kg. per Sqmt. on (one point seventy killogramme) damp proof course after cleaning the surface with a piece of cloth likely socked with kerosene oil as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete M-20 (Design Mix)mechanically mixed and vibrated (one cement: two sand: four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundations, footing bases of columns and like and mass concrete as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilevers upto floor two level.

Columns, pillars posts and struts upto floor any level as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.

Stair cases ( except spiral stair cases) excluding preparing of the surface and finishing of nosing upto floor two.

Wall (any thickness but not less than 0.10 metre thickness) including attached pilasters butterssses plinth and string course etc. from top of foundation upto floor two level.

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto all floor level. ( Tor steel mark or Tataincluding Building work with SAIL) Tata including as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing throating or plaster drip and moulding to RCC chajja as per direction of Engineer-in-Charge including carriage of material in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Boulder filling dry hand packed tightly under floor.as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying Precast concrete block masonry in partition walls 10 Cm.(ten centimeters) ten thick with solid block of approved size including quoin blocks, jamb blocks, closer etc. made of cement concrete 1:3:6 ( one cement : three sand : six graded crushed stone aggregate 40mm (forty millimeters) and down gauge) in cement mortar 1:6 ( one cement : six sand) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying 20cm(twenty centimeters) thick precast concrete block masonry (including quoin blocks, jamb blocks, closer etc.) with solid concrete blocks of approved size made of cement concrete 1:3:6(one cement: three sand; six graded stone aggregate 40mm (forty millimeters) (and down gauge) in foundation and plinth upto floor level two in cement mortar 1:6(one cement: six sand) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x19cmx 20cm (forty centimeters into nineteen centimeter into twenty centimeter)including quoin block jamb blocks and closers etc. made of cement concrete 1:3:6(one cement: three sand: six graded stone aggregate) 20mm(twenty millimeters nominal size) laid with including curing complete in super structure upto all heights as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing wire gauge shutter using galvanized M.S. wire gauge of I.S. gauge designation 85G eighty five –G with wire of dia 0.56mm (zero point fifty six millimeter) for door windows and clearstory windows including bright finished/black enameled iron hinges with necessary screws as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals 2nd class deodar wood.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 40 mm(forth millimetre )thick panelled glazed or panel and glazed shutter for door windows and clear story windows including black enameled iron but hinges with necessary screw. (2nd class Deodar wood) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing RCC work smooth finishing of the exposed surface with cement mortar 1:3 (one cement : three sand).The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Sand filling in plinth with sand under floor including watering, ramming , consolidating and dressing complete as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

PVC pipe 110 mm dia Finolex D-Plast SUPREME havey pressure not less than 4.5 kg/CM2 as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 8mm(eight millimeter) thick cement bounded particle board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 25mm(twenty five millimeters)diameter curtain rods with brackets, plugs etc. where ever required in 1st class deodar wood as per direction of Engineer-in-Charge including carriage of material in all leads and lifts.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing M.S. grills or required pattern in steel frame of windows etc. with M.S. flats square round bar with round headed bolts and nuts or by screws as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. Plain grills.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 40x3mm (forty into three millimetre) flat iron hold fast 40cm (forty centimeter). long including fixing to frame with 10mm(ten millimetre) diameter bolts, nuts and wooden plugs and embedding cement concrete block 30x10x15cum(thirty into ten into fifteen centimeter ) 1:3:6(one Cement: three Sand: six graded crushed stone aggregate 20mm (twenty millimetre ) nominal size as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding doors bolts of ESS Fitting anodized colour and shade with bolts and nuts screws etc. complete as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

300x16mm (three hundred into sixteen millimeters)

250x16mm(two hundred fifty into sixteen millimeters)

Providing and fixing aluminum tower bolts (barrel type) anodized transparent of ESS or dyed to required shade and colour with screws etc. complete as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

250x10mm (two hundred fifty into ten millimeters)

150x10mm(One hundred fifty into ten millimeters)

Providing and fixing aluminum anodized transparent handles of ESS or dyed to required colour and shade with necessary screw etc. complete as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

125 mm (one hundred twenty five millimeters).

100 mm (one hundred millimeters)

Providing and fixing M.S. hooks and eyes of ESS as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.

200mm( two hundred millimeters)

150mm( one hundred fifty millimeters)

100mm(one hundred millimeters).

Providing and fixing bright finished hard drawn hooks and eyes of ESS as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

150mm(one hundred fifty millimeters)

Providing and fixing 65x35mm(sixty five in to thirty five millimeter ) special quality chromium coming plated brass cupboard lock with six levers including necessary screws etc. complete (Indian make) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 12mm(twelve millimeters) thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters with 25mm(twenty five millimeters)thick frame of 1st class deodar wood for cupboard as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying 40mm(forty millimeters) thick marble chips flooring rubbed and polished to granolithic finish under layer 34mm(thirty four millimeter) thick cement concrete 1:2:4(one cement: two sand: four graded crushed stone aggregate 10mm )ten millimeter and down gauge and top layer 6mm( six millimeter) thick marble chips of required sizes laid in cement marble powder mix 3:1(three cement: one marble powder by weight) in proportion of 4:7(four marble powder mix: seven marble chips by volume as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. Medium shade pigment with approximately 50% (fifty percent) white cement and 50%(fifty percent) ordinary cement( in top layer only).The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying marble chips skirting or dado upto all height (rubbed and polished to granolithic finish) laid in cement marble powder 3:1(three cement: one marble powder by weight) in proportion of 4:7 (four marble powder mix: seven marble chips by volume)in top layer as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. Medium shade pigment with approximately 50% white cement and 50% ordinary cement( in top layer only).The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

White glazed tiles 6mm (Kajaria mark) (six millimeters) thick in flooring, treads of steps and landing laid on a bed of 12mm(twelve millimeter) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying marble work(table rubbed and polished) in flooring 20mm(twenty millimeter) thick base in cement mortar 1:3(one cement: three sand) including jointing with cement mortar 1:2(one white cement: two marble dust) with an admixure of pigment to match the shade of the marble 20mm(twenty millimeter) thick white marble as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 0.60mm(sixty millimeters) thick prepainted steel sheet of TATA/Sail in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5(five) microns primer coating to back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimeters) dia metre with prepainted limpet and rubber washers complete with all accesoriees as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm(sixty centimeters) overall with 0.60mm(zero point sixteen millimeters) thick prepainted steel sheets of TATA/Sail in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating and back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.

Steel work welded in built up section trusses and framed work of TATA/Sail brand including cutting, hoisting, fixing in position and applying a priming coat of red lead paint as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

In beams, joists, channels, angle, tees, flats with connecting plates or angle cleats as in main or cross beams, hip and jack rafters purlins connected to common rafter and like .

Providing and fixing on wall face C.I. rain water pipes including filling the joints with yarn and cement mortar 1:2 ( one cement : two sand). ( 100mm(one hundred millimeters dia pipe) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. pipe embedded in and including cement concrete block 10x10x10cm.(ten into ten into ten centimeters) of 1:2:4 (one cement :two sand: four graded crushed stone aggregate 20mm(twenty millimeters) nominal size) and cost of cutting holes and making good the wall etc as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

100mm(one hundred millimeters for G.I. pipe)

Providing and fixing wall face CI accessories for rain water pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2(one cement :two sand) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.

CI Plain bend 100mm (one hundred millimeters).

CI plain shoes 100mm (one hundred millimeters).

C.I. head 100mm (one hundred millimeters).

Applying priming coat of Asian paint over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Painting two coats of Asian paint(excluding priming coat) on new wood and wood based surface with ready mixed paints brushing to give an even shade including cleaning the all dirt, dust and other foreign matter sand papering and stopping with ready mixed paint other than white as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

15cm(fifteen centimeters) cement plaster in single coat on rough side of brick / concrete / stone walls for interior plastering upto floor two level including arries, hitenal rounded angles nut excluding 80mm(eighty millimeters) in girt and finished even and smooth in C.M.1: 6 ( one cement : six sand) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Flush pointing on coursed or ashlar stone masonry or concrete block walling with cement mortar 1:3(one cement: three sand) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

White washing with like on undecorated wall surfaces two coats to give an even shade of ASIAN paint including thoroughly brooming the surface to remove all dirt dust mortar dirt and other foreign matter as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.

Distempering (two coat ) with oil bound washable distemper of ASIAN paint and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surfaces free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

50mm (fifty millimeters) thick cement concrete flooring 1:2:4 ( one cement : two sand : four graded crushed stone aggregate 20mm(twenty millimeters nominal size) laid in one layer finished with a floating coat of neat cement as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

20mm (twenty millimeter) thick cement plaster skirting upto all heights with cement mortar 1:3(one cement : three sand) finished with a floating coat of neat cement including rounding of junctions with floor as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing under layer plinth protection of 75mm(seventy five millimeters) thick (un-consolidated) dry crushed brick/ stone aggregate 40mm (forty millimeters) nominal size well rammed and consolidated grouted with fine sand including preparation of ground as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Making plinth protection 50mm(fifty millimeters) thick in cement concrete 1:3:6 ( one cement : three sand : six graded crushed stone aggregate 20mm(twenty millimeters nominal size) as per direction of Engineer- in -Charge, including carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Constructing course rubble hammer dressed ‘U’ shape open surface drain with side wall 15x22cm(fifteen into twenty two centimeters) in cement mortar 1:6(one cement: six sand) and inside plastering with cement plaster 1:3(one cement: three sand)including earth work and laying 10cm(ten centimeters) cement concrete in 1:5:10 (one cement: five sand: ten graded stone aggregate) of 40mm (forty millimeters nominal size) and 7.5cm (seven point five centimeters) cement concrete 1:2:4(one cement: two sand: four graded stone aggregate of 20mm (twenty millimeters nominal size) and finished with a floating coat of neat cement concrete as per standard design and direction of Engineer-in-Charge including carriage of materials in all leads and lifts and other incidentals.The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Supplying and fixing cast iron cover with frame for manholes for frame of internal dimension (455mmx610mm)(four hundred fifty five millimeters into six hundred ten millimeters) rectangular C.I. cover (light duty single seal pattern-I) the weight of cover to be not less than 23kg.(twenty three kilogramme) as per direction of Engineer- in -Charge, including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive octori, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing vitreous china water closet squatting pan (Indian type WC Pan) with size 580mm (earth work, bed concrete foot rest and trap to be measured and paid for seprately) Orissa Pattern) of CERA ,HINDWARE/PARRYWARE make as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10.00 (Ten litres) viterous china white flushing cistern of I.S.I. marked of Cera/ Hindware/Parryware with a pair of C.I. or mild steel brackets complete with fitting such as lead valve, syphon 15mm (Fifteen millimetres) nominal size brass/PVC ball valve with polythene float, with push button unions and couplings for connection with inlet and outlet and over flow pipe 40mm (Forty millimetres) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink of approved quality (Diamond/ Prayag/Cera) ISI marked drain board and CP waste with CI or MS bracket painted white including cutting holes and making good the same but excluding of fitting 470 x 420 mm (Four hundred seventy into four hundred twenty milimetre) with boul depth 178 mm (One hundred Seventy Eight millimetre) of Cera/Jindal made including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fitting. Flat Black 550X400mm of CERA /HINDWARE/PARRYWARE ) The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimeters) dia of approved make CP brass waste for wash basin or sink complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetres) bevelled edge mirror ( Exotica make ) of superior glass mounted on 6mm (Six millimetres) thick Asbestos cement sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden plugs with CP brass screws 600 x 20mm (Seven hundred fifty into twenty millimeters) Jaquar/CERA/Czar including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish (ACN-1131N) with CP brass brackets fixed to wooden cleats with CP brass screws etc. of Jal/Jaquar or Hindware complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP Brass pillar tap with capstan head 15mm dia of Jaquar /Jal make.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. stop cocks 15mm (Fifteen millimetres) dia of Jaquar ( OPAL Series) or its equivalent in Hindware/Jal including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing brass stop cocks 15mm (Fifteen millimetres) dia of Jaquar ( OPAL Series) or its equivalent in Hindware/Jal including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC connections pipe with brass unions 45cm (Forty five centimetres) length 15 mm (Fifteen millimetres) nominal bore heavy duty including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel:-

15mm dia

20mm dia

Providing and fixing high pressure PVC (of Finolex make) spigot and socket soil waste and ventilating pipes ISI marked pressure not less than 6 Kg per / Square Centimeter including fixing with approved adhesive etc. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75mm dia

110mm dia

Providing and fixing PVC spun fitting accessories ISI marked including fixing with approved adhesive etc. complete of Finolex make) The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Bends of required degree any radious of Finolex/Supreme make . Plain bends 75mm dia

110mm dia

Single equal branch of required degree with ovel access door insertion rubber washers 3mm thick bolts and nuts complete.With oval acess door insertion rubber washer 3mm thick, bolts and nuts complete 75mm dia

110mm dia

Double equal branch of required degree with ovel access door insertion rubber washers 3mm thick bolts and nuts complete.With oval acess door insertion rubber washer 3mm thick, bolts and nuts complete 75mm dia

110mm dia

Collar 90mm dia

110mm dia

Providing and fixing PVC cowl 100mm dia of Finolex,Diplast, Supreme make. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC bats clamps including steel bolts to sand cast iron/cast iron (spun) iron pipes embedded including cement concrete blocks 100x100x100mm of 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) incluidng cost of cutting hole and making good the walls. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

75mm dia

100mm diametre/size pipe

Providing and fixing PVC floor trap (Finolex ,Diplast,Supreme make) pressure not less 6 Kg /square Centimetre ISI marked of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etc. complete in all respect. 110X75 mm dia. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing stone ware gully trap grade ‘A’ complete with CI grating brick masonry chamber in cement mortar 1:5 (One cement : five coarse sand) and water tight C.I. cover with frame of 300 x 300mm (Three hundred into three hundred millimetres) size (inside) the weight of cover to be not less than 4.53kg (Four point five three kilogramme) and frame to be not less than 2.72 kg (Two point seven two kilogramme) square mouth trap 100x100mm (One hundred into one hundred millimetres) size P-Type including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

100X100mm (Size P Type)

Providing and fixing 110 mm (one hundred ten milimetre) dia chromium plated grating of superior quality for floor, gully or nahani trap including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

P/F PVC 32m dia Waste Pipe including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC water storage tank of Sintex make (I.S.I. marked five layer) 1000 (One thousand) litre capacity with 40mm (Forty millimetres) nominal size bore galvanized mild steel scour tube with fittings 25mm (Twenty five millimetres nominal bore) galvanized mild steel overflow pipe with fittings and mosquito proof coupling of approved design 15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all heights above ground level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor galavanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor of JINDAL/TATA MAKE. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm nominal bore

20mm nominal bore

Construction manhole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (one cement : four sand : eight graded stone aggregate 40mm nominal size) in side plastering 15mm thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement : two sand : four graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing.

Inside size 800x800x1000mm deep including C.I. cover with frame (Light duty single seal : Pattern) 450mmx 610mm integral dimensions total weight of cover and frame to be not less than 38 kgs (weight of cover 23kg and weight of frame 15 kg with 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement : 3 sand). The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Inside size 1200x900x1000mm deep including C.I. cover with frame (Light duty single seal : Pattern) 455mmx 610mm integral dimensions total weight of cover and frame to be not less than 38 kgs (weight of cover 23kg and weight of frame 15 kg with 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement : 3 sand). The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Excavation in drain channles etc in earth work including dressing the sides and bed and disposing of excavated earth upto 20mtr. and lift upto 1.50mtr. disposed earth tobe leveled and neatly dressed in pick and jumper work. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

KAMAL PATHANIA GOVT.CONTRACTOR