DAY TO DAY MAINTENANCE IN TECHNICAL AREA EM AND BR AT DRDE GWALIOR AND REPAIR TO LEAKAGE SEEPAGE FLOOR WALL TILING AND MISCELLANEOUS WORK AT OLD DRDE GWALIOR UNDER GE I RND DELHI

Amount

Repair and mending of leakage in 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description includig replacement of internal fitting of requisite pattern and size complete all as specified and directed.

S&F in repairs PVC connection 15mm size 450mm long with 2 Nos PTMT end nuts with washer complete all as specified and directed.

S&F in repairs brass chromium plated shower rose with swivel joints, 125mm dia, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipes. (Minimum weight 90gms) complete all as specified and directed.

S&F in repairs 15mm dia cast copper alloy chromium plated long body fancy type bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia cast copper alloy chromium plated bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm dia chromium plated cast copper alloy fancy type pillar taps with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flyuts, screwed for iron pipecomplete all as specified and directed.

S&F in repairs 15 mm dia chromium plated cast copper alloy stop valves, fancy type with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions including dismantling, taking out from wall as required and making good dismantled portion of wall to match with the existing surface complete all as specified and directed.

S&F in repairs 15 mm dia chromium plated cast copper alloy stop valves, angle type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 142gms) complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210gms) complete all as specified and directed.

S&F in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210gms)

S&F in repairs 32mm dia waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.

S&F in repairs 40mm dia waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.

S&F in repairs small galvanised iron fittings (ISI Marked) such as socket, elbow, nipple, tee, union etc for 15mm bore pipe complete all as specified and directed.

S&F in repairs small galvanised iron fittings (ISI Marked) such as socket, elbow, nipple, tee, union etc for 20mm bore pipe or 15x20mm reducers complete all as specified and directed.

S&F in repair 32mm waste coupling of PTMT, half or full threaded (minimum weight 45gms) complete all as specified & directed.

S&F in repairs 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, stretched length 90cm with PVC coupling socketcomplete all as specified and directed.

S&F in repairs 40mm dia ribbed PVC waste drain pipe for sink, stretched length 90cm with PVC coupling socket complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, brackets, PVC flushing pipe inclduing connecting to WC complete all as specified and directed.

S&F in repairs flush pipe of polyethylene with rubber cone for low level flushing cistern including jointing to WC complete all as specified and directed.

S&F in repairs internal fitting (PVC syphon kit) with handle complete for low level PVC flushing cistern complete all as specified and directed.

S&F in repairs chromium plated butterfly spray jet for EWC with 1m long brass chromium plated flexible tube provided with end nut and washer complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back, size 550 x 400mm including CI/MS brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for 32mm pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repairs stainless steel grating 125 mm dia with or without hole for waste pipe, fixed on floor/ nahani trap with cement morter complete all as specified and directed.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated or PVC hanging device complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provn of lean concrete bedding, connections to flushing pipe and making good disturbed portion of floor to match existing surface complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white including fixing bolts, connection to drain (or outgoing pipe) and flushing pipe etc complete all as specified and directed.

Opening of air lock/ blockage in GI pipe line from service water tank to internal GI pipes/ fittings for smooth flow of water to bib taps/ showers/ pillar tap/ stop valves complete by application of pressure pump/ gravity pressure complete all as specified and directed.

Labour only for attending plumber complaints and rectifying defects such as leakage from flushing cistern down pipe, flush handle, PVC connection, stop valves, leakage of taps, mixer, mixer, stop cocks, leakage in GI pipe line fittings, water tanks/over flow from inlet & outlets and repair in portion including providing all type of washers, and minor accessories (upto 2 No. items in each bldg.) Note : A plumber alongiwth helper shall attend the office of AGE E/M R&D Gwalior to recuse complaints from JE B/R in job card format and shall submit it bak to him for claiming the payment.

Attending carpenter complaints such as tightening of loose door/ window/ cup board hinges, re-fixing of loose sliding bolts/ tower bolts/ handles, resecuring of loose pelmet & curtain rods/ brackets and repairing in position including providing all type of screws, nails and necessary minor accessories (upto 5 No. items in each bldg.) Note : A plumber alongiwth helper shall attend the office of AGE E/M R&D Gwalior to recuse complaints from JE B/R in job card format and shall submit it bak to him for claiming the payment.

S&F in repair 6 mm thick commercial face plywood, grade BWR type BB including two coats of synthetic enamel paint over a coat of pink primer on one face, fixed with screws in repair complete all as specified & directed.

S&F in repair cord drawn veniation blinds (10 cm wide vertical polyester stripes of approved colour) consisting of aluminium head rail, traverse cord, tilt mechanism complete. (overall size to be measured) complete all as specified & directed.

Resecuring, easing or adjusting without taking down door/ windows shutters not exceeding 1 Sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws complete all as specified & directed.

Resecuring, easing or adjusting without taking down door/ windows shutters exceeding 1 Sqm but not exceeding 2 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws complete all as specified & directed.

S&F in repairs 300 mm long aluminum alloy anodised sliding door bolt hasp staple (bolt type) and fixed clips of sheet cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

M&L in repairs aluminium sheeting 0.56 mm thick cut to required size fixed to wooden shutters with CP screw or brass/ stianless steel pins (measured as the minimum rectangle from which the pieces can be cut) complete all as specified & directed.

S&F in repairs anodised aluminium alloy body door stopper and rubber shoe, overall length of cover plate 140mm complete all as specified & directed.

M&L for resecuring glass of any description in existing steel frame with putty including removing and raking out old putty complete all as specified & directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rail 60mm long including brackets complete all as specified & directed.

S&F in repairs 125 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed.

S&F in repairs 200 mm size aluminium anodised barrel tower bolts of extruded section. complete all as specified & directed.

S&F in repairs 100 mm size aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified & directed.

S&F in repairs 100 mm size steel or malleable cast iron handles, handles suitable for steel windows complete all as specified & directed.

S&F in repair 100 mm mild steel butt hinges medium weight cold rolled complete all as specified & directed.

S&F in repair 75 mm mild steel butt hinges medium weight cold rolled complete all as specified & directed.

S&F in repair brass chromium plated health faucet with 1 m tube and hanging hook. complete all as specified & directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar or laid dry complete all as specified & directed.

M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in cement mortor 1:4.

Rounding to edges of stone slabs one edge, such as in steps and other similar situations complete all as specified & directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thinck rendering in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Providing and laying 60mm thick factory made cement concrete M-35 grade paver blocks made by table vibratory method using PU moulds, glossy finish of approved colour, design & pattern, laying by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified & directed.

Providing and laying factory made M-25 grade cement concrete kerb stone fixed in position to the required line, level and curvature including necessary earthwork, jointed with cement mortar 1:3, making joints with or without grooves, thickness of joints not more than 5 mm (except at sharp curves) complete all as specified & directed.

Taking up down steel tubing and connections 15mm bore including cleaning for re-fixing or removal from site.

Taking up down steel tubing and connections 20mm bore including cleaning for re-fixing or removal from site.

S&F 15mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors.

S&F 20mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors.

Cutting chases in brick walls, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed.

Dismantling water tanks exc 250 and not exceeding 500 litre capacity complete all as specified & directed.

Dismantling water tanks exc 500 and not exceeding 1000 litre capacity complete all as specified & directed.

S&F rotational moulded polythylene water storage tank 500 litre capacity, triple layered cylindrical vertical with closed top, hoisted and fixed in position all as specified.

S&F rotational moulded polythylene water storage tank 1000 litre capacity, triple layered cylindrical vertical with closed top, hoisted and fixed in position all as specified.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level.

M&L for providing 75mm thick PCC 1:3:6 type, C-2 (40mm graded aggregate) finished even and smooth without using cement extra cement complete all as specified & directed.

M&L for providing 75mm thick PCC 1:4:8 type , D-2 (40mm graded aggregate) in sub base complete all as specified & directed.

Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified & directed.

M&L for Non - skid joint free ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.

M&L for Non - skid joint free ceramic tiles skirting cut out of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L for Non - skid joint free ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.

M&L glazed ceramic coloured tiles in vertical surfaces, area of each tile exc 0.08 sqm but not exc 0.16 sqm, 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick rendering in cement mortar 1:4. complete all as specified & directed.

M&L glazed ceramic coloured tiles in vertical surfaces, 300x 200x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4. complete all as specified & directed.

M&L for vitrified ceramic light shade coloured tiles 8 to 9 mm thick, area not exceeding 0.36sqm (square or rectangular) polished, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.

M&L for vitrified ceramic light shade coloured tiles skirting cut out of 8 to 9 mm thick, area not exceeding 0.36sqm (square or rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L for Chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified & directed.

S&F in repairs 100 mm long anodied aluminium handles, cast or extruded type for aluminium windows complete all as specified & directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel wire staple etc in wooden or steel frames complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames glazed with putty or fixed with beads complete all as specified & directed.

S&F 3 mm thick sheet glass not exc 0.50 sqm in each pane fixed with and including provision of wooden beads or putty in wooden or metal frames complete all as specified & directed.

S&F 5.5mm thick sheet glass of any plain or tinted, ordinary quality and glazing with exising snap beading and new rubber neoprene packing in aluminium frames including taking out old broken glass complete all as specified & directed.

S&F in repair door closer hydraulically regulated, aluminium body designation No. 3, universal type, suitable for door shutter of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified & directed.

S&F aluminium frame door seal bottom nylon brush with upto 94 cm long suitable to cover gaps upto 20mm to fit any type of doors complete all as specified & directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified & directed.

Welding in repairs, thickness of metal to be welded n exc 6mm in any situation and on any floor. (welding in length less than 10cm to be measured as 10 running cm)

Repair to aluminium door and window shutters by taking down shutter from frame, opening out joints, taking out glass or panels of any description, replacing the corner piece wherever required, joining and assembling again, refixing the glass pane and panels by provision of new rubber neoprene packing complete all as specified & directed.

S&F in repair mortice lock, verticle type of brass complete size 75mm and 4 levers for aluminium doors complete all as specified & directed.

S&F in repairs vitreous China bowl type flat back urinals white of size 465 x 355 x 265 mm complete including bedding urinal against wall, securing urinal to plugs with and including 60 mm long brass screws, grating and union for discharge pipe, pointing around urinal back in white cement; connecting to flush and waste pipe complete all as specified & directed.

S&F in repairs vitreous China half stall type flat back urinals white including bedding urinal against wall, securing urinal to plugs with and including 60 mm long brass screws, grating and union for discharge pipe, pointing around urinal back in white cement; connecting to flush and waste pipe complete all as specified & directed.

S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimun weight 60 gms) complete all as specified & directed.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified & directed.

M&L for brick work with sub-class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified & directed.

Taking down cement plaster in patches not exceeding 3sqm each on brick walls or ceiling etc. raking out joints hacking for key, scrubbing down with water etc complete all as specified & directed.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc.

Rendering 15 mm thick in patches not exceeding 3sqm each in cement mortar 1:6 on brick walls or concrete surface, finished even and fair without using extra cement complete all as specified & directed.

Rendering 15 mm thick in cement mortar 1:4 in patches not exceeding 3sqm each on brick walls or concrete surface, finished even and fair without using extra cement complete all as specified & directed.

Rendering 10 mm thick in cement mortar 1:4 in patches not exceeding 3sqm each on brick or concrete surface in ceiling, finished even and fair without using extra cement complete all as specified & directed.

Rendering 15 mm thick in cement mortar 1:6 on brick walls or concrete surface,finished even and smooth without using extra cement.

Rendering 5 mm thick in cement mortar 1:3 on brick or concrete surfaces in ceiling, finished even and smooth without using extra cement.

M&L for Preparing newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified & directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified & directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion 1mm thick wall care putty complete all as specified & directed.

S&F in repairs kitchen sinks without drainage board made of stainless steel 1 mm thick with wastes coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repairs kitchen sinks made of stainless steel 1 mm thick with wastes coupling and washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

Taking down PVC soil, waste and rainwater pipes (any size or pattern), including all fittings, shoes, bends etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified & directed.

S&F in repairs powder coated aluminium alloy drapary (curtain) rod 25mm dia fancy type with fixing brackets, end cap studs complete all as specified & directed.

Demolition of lime concrete in ground floors and pavings exc 15 cm thickness.

M&L for PCC 1:5:10 type E-2 (40 mm graded aggregate) in filling and mass concrete complete all as specified & directed.

M&L for applying evenly two coats of blown type bitumen at the rate of 1.50 kg per square metre each coat complete all as specified & directed.

M&L for Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50kg per sqm complete all as specified & directed.

S&L for 25mm bore galvanised steel water tubing medium grade in sunken floor spouts etc including cutting through brick wall and making good complete complete all as specified & directed.

M&L for Rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

Demolition of reinforced cement concrerte of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Removal of existing bituminous felt roof treatment of any description, cleaning the surface and removing the debris out of MoD land.

Providing, cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) in roof kerbs, roof padding, base of tank or mud stops, rounded or chamfered on edges.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3.

M&L rendering15 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 and finished even and smooth without using extra cement including mixing of W.P.C. complete all as specified & directed.

Supply only liquid water proofing compoundcomplete all as specified & directed.

M & L for Brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed.

M&L for Waterproofing on roof and parapets including flashing and junctions of parapet, kerb, wall etc. as under:- (a) Applying bituminous primer on cleaned and dried surface @ 0.20 Kg/Sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot at the rate of 1.2 kg/sqm. (c) Laying APP based polymeric water proofing membrane (weighing not less than 3 kg/sqm) reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) by thermo fusion using butane torch with 10 cm longitudinal and 15 cm end overlaps firmly bonded and levelled by heating with butane torch. (d) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15 Kg/Sqm.

S&F Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified & directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified & directed.

S&F 30 mm thick solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rails; panelling of plain colour PVC sheet sealed to the stiles and rails with suitable PVC sheet beading, joined together with solvent cement complete all as specified & directed.

S&F aluminium anodised barrel tower bolt extruded section, 200 mm long complete all as specified & directed.

S&F Extruded anodised aluminium alloy handles fabricated type 150mm long grip complete all as specified & directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified & directed.

S&F in repair mild steel 300 mm ordinary rat tail rod pattern door spring incl roller & plate including welding on mild steel frames complete.

Dismanting floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises.

M&L for 25mm thick cement concrete 1:2:4, type B-1 (20mm graded aggregate) in floors complete all as specified & directed.

Disconnecting existing tanks of capacity exc 250ltr and not exc 500ltr, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position after cleaning of water tank complete all as specified & directed.

Disconnecting existing tanks of capacity exc 500ltr and not exc 1000ltr, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position after necessary cleaning of water tank complete all as specified & directed.

S&F in repair 15mm bore chromium plated cast copper alloy sink tap with swan neck type spout with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repair 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified & directed.

S&F in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified & directed.

S&F in repair white vitreous china laboratory sink size 450x300x150mm including beding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe complete all as specified & directed.

S&F in repair white vitreous china laboratory sink size 600x450x200mm including beding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe complete all as specified & directed.

S&F in repair 15mm bore chromium plated cast copper alloy three way laboratory cock (deck mount installation type), screwed down, screwed for iron pipe.

S&F in repairs 15 mm dia chromium plated cast copper alloy two way stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions

S&F in repair PVC lid for PVC water storage tank covers upto 1000 lit capacity complete all as specified & directed.

S&F in repair acrylic body bath cabinet single mirror, size 350mmx450mm complete all as specified & directed.

S&F in repair stainless steel kitchen storage (plate rack) of overall size 31" x 36" x 10"complete all as specified & directed.

S&F in repairs internal fitting of requisite pattern and size for 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description.

S&F 18 mm thick wood plastic composite (WPC) panel fixed in repair with suitable pins, screws and adhessive in cabinets body, shutters and shelves complete all as specified & directed.

S&F Mild steel bright finish or electrogalvanised continuous (piano) hinge 40mm width of flaps and fixed to cup board shutters complete all as specified & directed.

S&F 40mm dia mild steel bright finished cupboard knobs fixed with nut, screw and washer complete all as specified & directed.

S & F stainless steel modular cabinet hinges with spring suitable to hold the shutter in open/shut position complete all as specified & directed.

S & F stainless steel cabinet handles 75mm size decorative type complete all as specified & directed.

S&F 35mm size magnetic catches fixed in modular type cabinets with MS plate (bright polished) on shutter complete all as specified & directed.

S&F 100 mm size aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified & directed.

Dismantling of cast iron drain pipes and fittings upto 100mm bore, jointed in cement mortar and taking out of trenches, if required.

S&F 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified & directed.

S&F 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified & directed.

Fixing only 75mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls.

Fixing only 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified & directed.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified & directed.

S&F 75mm bore cast iron bends (any radius), fitted with oval access doors complete all as specified & directed.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access doors complete all as specified & directed.

S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access doors complete all as specified & directed.

S&F Cast iron cowls 100mm bore complete all as specified & directed.

S&F Cast iron nahani trap 75mm dia of outlet with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & directed.

Restraining and resecuring 2 strand steel barbed wire fixed to any type of standard rails straining bolts fixed on security wall, including making good staples, tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc. as directed (each line wire to be measured) complete all as specified & directed.

S&F in repair galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing in repairs to any type of standard rails, straining bolts on security wall including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc. as directed (each line wire to be measured) complete all as specified & directed.

Taking down and refixing concertina razor wire coil of any description fixed on security wall with and provision of galvanised mild steel wire staples or steel pins etc.

S & F in repairs on security wall, 450mm dia concertina razor wire 3 clips cross type coil with short blades having barb thickness 0.5 ± 0.05mm, barb length 10.0 ± 1mm, barb width 13 ± 1mm, barb spacing 25 ± 2mm and core wire diameter 2.5 ±0.1mm extended to 6-7 loops per metre.

Preparing surfaces of old steel and iron swan neck posts etc. fixed on security wall, area excedding 0.1 sqm but not exceeding 0.5 sqm each and treating with tar or coal tar black paint complete all as specified & directed.

M & L for Post construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified & directed.

Providing and injecting chemical emulsion for Post constructional anti termite treatment along external wall below concrete apron using chemical emulsion @2.25 Ltrs/linear metre including drilling and plugging holes etc in apron.

Dismantling corrugated or plain steel sheeting any gauge,thickness,including Nainital or similar pattern roof coverings

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering for flat or arched roof cladding to wall, fixed with self tapping screws as specified

Dismantling wrought iron or mild steel work of any discription not otherwise provided for complete all as specified and as directed

S&F Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde E- 250) quality A as per IS 808(Part V)1976 .

M&L preparation of new steel surfaces of any descriptions and applying two coats of synthetic enamel paints over a coat of red oxide primer.

S&F PVC (SWR) pipes 75mm dia. single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L for grouting of sunken floor slab with cement slurry by mixing 50 Kg of cement with 18 to 22 litre of water with admixture of FOSROC CEBEX 100 (Plastized expanding grout admixture) about 225 gms per 50 Kg of cement by drilling upto 12mm dia. hole in floor @ 300mm C/C upto required depth and grouting/ pumping the grout with mechanically powered grout mixer upto 10 Kg for each hole as per manufacturer's instructions and sealing the hole after grouting (GROUT= WATER+ CEMENT+ FOSROC CEBEX 100 in proportion) complete all as specified and directed.

M&L for sealing of floor/wall tile joint with NITOTILE GROUT (Cementing Tile Joint Filler) by uniform paste prepared with one part of water to 3 part of powder by volume complete all as per manufacturer's instructions complete all as specified and directed.

Repair to low/ high level flushing cistern syphon, washers, handles, float valves, stopping leakage of Down pipe by applying m-seal and other related works of to make the flushing cistern functional complete all as specified and directed by Engineer-in-Charge. NOTE : Rates quoted by the contractor are deemed to inclusive of necessary tools and plants incl mtrls viz GI inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia etc required to complete the job.

M&L for repairs to the existing floor trap by demolition of PCC including tiles & screed bed for the floor area of 200x200mm around the floor trap, provision of 110mm dia. PVC (SWR) pipe vertically for the depth of 20 to 30cm from the floor level up to the floor trap embedded in PCC 1:2:4 type B1 and making good with the existing floor finish including provision grating complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power ) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditionss separately) and making good disturbed surfaces of walls, floors etc complete all as specified & directed.

M&L for point wiring with 1.5 sqmm multi stranded PVC FRLS insulated unseathed copper conductor cable FRLS in and including PVC conduit of size 25 mm width for one light point or fan point or bell point controlled by one switch including PVC insulated unsheathed 1.5 sqmm copper conductor FRLS continuous earth wire and connecting with earth dolly and making good the distrubed surfaces matching with existing specifications complete all as specified and as directed.

M&L for point wiring for 3 pin socket outlet, 5 amps, independent, but below the switch boarch of light points in the same vertical plane with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor FRLS cable in and including PVC conduit of size 20 mm dia plasitc laminated sheet 3mm thick including PVC insulated unsheathed 2.5 sqmm copper FRLS conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the distrubed surfaces matching with existing specification complete all as specified and as directed.

M & L in replacement Sub main wiring in repairs with two single core PVC FRLS insulated cable 4 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC concealed conduit 25 mm dia ISI marked, 2.5 sqmm multistrand copper conductor PVC FRLS green unsheathed cablefor earth continuity complete all as specified and directed.

M & L in replacement Sub main wiring in repairs with two single core PVC FRLS insulated cable 6 sqmm (Nominal dia) copper conductor multistrand and drawing in and including S&F PVC concealed conduit 25 mm dia ISI marked, 4 sqmm multistrand copper conductor PVC FRLS green unsheathed cablefor earth continuity complete all as specified and directed.

S&F in replacement switch piano type 5 Amp one way AC 230 volts complete all as specified and as directed.

S&F in replacement switch piano type 5 Amp two way AC 230 volts complete all as specified and as directed .

S&F in replacement of socket outlet 2in - 1, 5 Amp 3 pin AC 230 volt complete all as specified and as directed.

S&F in replacement switch socket outlet 2in - 1, 5 Amp 3 pin AC 230 volt complete all as specified and as directed.

S&F in replacement switch Socket outlet 2 in 1, 5 pin 5 Amp and 15 Amp multi purpose socket outlet 3/6 AC 230 volt complete all as specified and as directed.

S&F ceiling rose of size 65 x 50mm 3 terminal AC 230 volt complete all as specified and as directed.

S&F lamp holder angle/ batten holder back light type with base plate suittable for 230 volt complete all as specified and as directed.

S&F door bell AC 230 volt ding dong single phase complete all as specified and as directed.

S&F in repairs electronic Ballast for FTL 36/40 watt 240 volts complete all as specified and as directed.

S&F in repairs for FTL rod 36/40 watt 240 volts complete all as specified and as directed.

S&F in repairs for LED Tubelight rod 20 watt 240 volts complete all as specified and as directed.

S&F in replacement MCB SP 6 to 32 Amps 10 KA complete all as specified & directed.

S&F in replacement MCB SPN 40 Amps 10 KA , 'C' Series complete all as specified & directed.

S&F in replacement MCB TPN 63 Amps 10 KA 'C' Series complete all as specified & directed.

S&F in repairs sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including double pole MCB 20 Amps complete all as specified and as directed.

S&F surface and wall mounted 20 Watt LED tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver input voltage AC 230 V, 50 HZ complete all as specified and directed

S&F in repairs of bulk head luminarie with LED 10 watt lamps Hexagonal shaped with engineering plastic housing and frame with opal PMMA defuser complete including disconnecting and taking out old U/S light fittings all as specified and directed.

S&F energy saving decorative wall mounting LED Lighting fixtures as mirror light made out of poly corbonate suitable for 5 watt LED and making connections complete all as specified and directed.

S&F in repairs plastic laminated bakelite hylem sheet of size 12 cm x 12 cm , 3mm thick, cut to required sizes and shapes including making holes and necessary cuttings for fitting of switches/ sockets/ regulators complete all as specified and directed

All as per Item No. 205 above but of size 12cm x 20cm

S&F PVC Rectangular block for mounting switches, sockets, regulators etc.with 3 mm thick plastic laminates sheet cover of size 100x100x50 mm deep complete all as specified and directed

All as per Item No. 207 above but of size 200x150x50 mm

S&F in repairs of Modular switch 1 Way 6 Amp , 1 Module AC 230 volt complete all as specified and as directed.

S&F in repairs of Modular switch 1 Way 16 Amp , 1 Module AC 230 volt complete all as specified and as directed.

S&F in repairs of Modular socket , 6 A-2/3 pin combined , 2 Module AC 230 volt complete all as specified and as directed.

S&F in repairs of Modular socket , 6 A/16 Amp -2/3 pin combined , 2 Module AC 230 volt complete all as specified and as directed.

S&F in repairs of Modular white cover plate with frame but 4 module complete all as specified and as directed.

S&F in repairs of Modular white cover plate with frame but 8 module complete all as specified and as directed.

S&F in repairs of Modular white cover plate with frame but 12 module complete all as specified and as directed.

S&F in repairs for LED domestic bulb 9 Watt type 240 volts complete all as specified and as directed.

M&L in repairs for winding of AC ceiling fan motor 1200mm any make of fan with super enameled copper winding wire of existing size including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections complete all as specified and as directed.

M&L in repairs for winding of Exhaust fan motor 300 - 380 mm sweep with super enameled copper winding wire of existing size including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with three core copper flexible wire of size 40/ 0.0076 mm of length not more than one mtr. with each fan complete all as specified and as directed.

Supply and fixing in repairs the ball bearing of size 6200 / 6201 complete all as specified and as directed.

All as per srl item No 219 here-in-before but of size 6202 complete all as specified and as directed.

Reshaping of mild steel shaft of ceiling fan to proper fixing the same including necessary lathe (machine) work complete all as specified and directed.

S&F in repairs of fan regulator, electronic type, AC 230 volts suitable for 1200mm/ 1400mm sweep ceiling fan, stepped range, hum free complete all as specified and as directed.

S&F in repairs capacitor AC 220 volts 2.5 to 3.15 mfd complete all as specified and as directed.

M & L in repairs of PVC insulated twin core flexible copper cable of size 40/76 Guage complete all as specified and as directed.

S & F installation , testing and commissioning in repair of pressure die-cast aluminium housing with high power LED bldg security light fitting with IP-66 , 1x 25 Watt , fixed in position with and including 40 mm dia light grade GI Pipe made to shape not less then 1.2 Mtr long for mounting fitting with and including suitable size duly painted MS FI 40 x6mm clamps with nut and bolts , washers making electrical connection with and including three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed

S&F PVC self adhesive electrical insulation tape of size1.80cmx6.5mx0.125mm all as specified and directed

M/S J P ENTERPRISES

GUPTA ENGINEERING WORKS

RADHA MADHAV CONSTRUCTIONS