Covered Car Parking Shed and Revamping of Existing Ms Covered Car Parking at VVT

Carrying out excavation in any kind of soil including soft/disintegrated rock, sandstone, stiff clay, gravel, cobble stone, hard laterite, water-bound macadam, wet-mix macadam, hardcore, lime concrete, plain cement concrete, stone masonry and all types of brick/block masonry below ground level, rock boulders, etc. by mean manually or mechanical means/ chiselling over areas for pavement, land/plot , paths and for all depths/lifts including manual dewatering, filling the selected excavated earth at the locations as directed, in layers thickness, watering, consolidating, compacting upto desired level (for further details please refer respective Item description in the NIT and Tender specification)

Providing, laying dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick in proper line and desired level including hand packing, sand filling in voids and compacting with rammers etc. complete as directed by Bank’s Engineer. (for further details please refer respective Item description in the NIT and Tender specification)

Providing and laying Ready Mix cement concrete for PCC in M20 grade of trap/ granite/quartzite/gneiss metal for steps including strong and self supporting wooden centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (for further details please refer respective Item description in the NIT and Tender specification)

Providing and laying Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, strong and self supporting wooden centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) etc. as directed by Bank’s Engineer. (for further details please refer respective Item description in the NIT and Tender specification)

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. footings, foundations, slabs, beams columns, canopies, , copings, fins, etc. as per detailed designs, drawings and schedules including straightening, cutting, bending, hooking the bars, binding with wires, lapping or tack welding and supporting as required complete at all levels as per direction of Bank’s Engineers. (for further details please refer respective Item description in the NIT and Tender specification)

Providing structural steel work in hollow section in square, rectangular and round shape, hot rolled sections as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc MS Plates, stiffened plates, bolts of various thickness and sizes . as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing/placing in position, making riveted/bolted/ welded connections with stiffeners, gussets, base plate, . The rate shall be inclusive of providing and applying approved make epoxy painting to all the members with epoxy primers, surface preparations, scaffolding etc. all complete . The rate shall include arranging & making shop drawing for structural fabrication works. (for further details please refer respective Item description in the NIT and Tender specification)

Supplying, fitting & fixing 9mm thick multiwall polycarbonate sheet of approved make & brand conforming to IS: 14443-1997 and having 50 micron UV protection layer under co-extrusion technology, Fire rating being B-s1 as per EN13501-1 certification, fitted and fixed with 60mm wide aluminium channel section top and bottom member in dry-glaze sandwitch system, (unit wt. of top and bottom members: 0.375 kg/m & 0.69 kg/m) of approved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer "C" channel and 75 mm long Self tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without anyway puncturing the polycarbonate sheet, EPDM Washer 16 mm dia & 3 mm thick washer etc complete strictly as per manufacturers specification and direction of Engineer in Charge. (Payment to be made on area of finished work) . (for further details please refer respective Item description in the NIT and Tender specification)

Arranging, Procuring an irrevocable Bank guarantee valid for a period of 06 months, submitting the same to MCGM towards solid waste management as per rules of BMC . Quoted rate shall include all statutory expenses, liaison charges, stamp papers, visits, all allied expenses etc. for obtaining an NOC for Solid waste management (SWM) from the MCGM. The said BG shall be on absolute possession of MCGM till the validity of NOC for SWM and as per the direction of MCGM for a critical period of one year from the date of commencement of work. (for further details please refer respective Item description in the NIT and Tender specification)

Extending the Bank guarantee as mentioned in item no. 8 above for further periods as directed. (for further details please refer respective Item description in the NIT and Tender specification)