Construction of 3 x 10 Mtr span minor bridge approach road and protection work at Panipat Khatima Road SH-12 in KM-129 on Choiya River

Making balli piling in river stream for providing of a dry working area including , soring G.I. sheets , E.C. bags , earth work, etc as required & directed by the E/I. As per MORTH. (Including labour cess but excluding GST.)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material complete. As per MORTH Specification Clause 304 Sr. No. 15.01. (Including labour cess but excluding GST.)

Cutting Edge of Mild Steel Providing and Laying Cutting Edge of Mild Steel weighing 40 kg per metre for Well Foundation complete as per Drawing and Technical Specification. As per MORT&H Specification clause 1200 & 1900 Sr. No. 12.10. (Including labour cess but excluding GST.)

R.C.C. work in M-30 in well curb with cement , approved coarse sand & 2 Cm. Gauge well graded grit including necessary shuttering , placing and fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all materials, labours T&P etc. required for proper completion of the work. As per MORT&H Specification clause 1500, 1700 & 2100 Sr. No. 12.08G. (Including labour cess, Royalty but excluding GST.)

R.C.C. work in M-30 in well Steining with cement , approved coarse sand & 2 Cm. Gauge well graded grit including necessary shuttering , placing and fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all materials, labours T&P etc. required for proper completion of the work. As per MORT&H Specification clause 1500, 1700 & 2100 Sr. No. 12.08G (Including labour cess, Royalty but excluding GST.)

Sinking of wells 5.00Mtr. External dia through all kinds of sand silt, clay except hard stratum like Kankar, boulders, rocks only below the low water level including loading and unloading of weight and pumping out of water including necessary T&P machines, labour etc. was required for proper completion of the work. As per MORT&H Specification clause 1200 Sr. No. 12.12 (Including labour cess but excluding GST.) (A) 0.00 meter to 3.00 meter

Sinking of wells 5.00Mtr. External dia through all kinds of sand silt, clay except hard stratum like Kankar, boulders, rocks only below the low water level including loading and unloading of weight and pumping out of water including necessary T&P machines, labour etc. was required for proper completion of the work. As per MORT&H Specification clause 1200 Sr. No. 12.12 (Including labour cess but excluding GST.) (B) 4.00 meter to 10.00 meter.

Sinking of wells 5.00Mtr. External dia through all kinds of sand silt, clay except hard stratum like Kankar, boulders, rocks only below the low water level including loading and unloading of weight and pumping out of water including necessary T&P machines, labour etc. was required for proper completion of the work. As per MORT&H Specification clause 1200 Sr. No. 12.12 (Including labour cess but excluding GST.) (C) 11.00 meter to 12.00 meter.

C.C. work in M-30 in bottom plugging of well with cement , approved coarse sand and 2cm gauge well graded grit including necessary shuttering, placing & fixing of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply of all materials, labours T&P etc. required for proper completion of the work. As per MORT&H Sr. No. 12.11C (Including Royalty, labour cess but excluding GST.)

Local sand filling in side the well between bottom and top plugging including watering ramming and also including necessary T&P etc. required for proper completion of work. As per MORT&H Specification clause 1207 Sr. No. 12.21 (Including labour cess Royalty but excluding GST.)

P.C.C. work in M-25 in top plugging of well with cement , approved coarse sand and 2cm gauge well graded grit & also including supply of all materials , labours T&P etc. required for completion of the work. As per MORT&H Sr. No. 12.11D(ii). (Including Royalty, labour cess but excluding GST.)

RCC work in M-30 in well caps with cement approved coarse sand & 2cm gauge well graded grit including necessary shuttering placing & fixing of reinforcement including its binding with wire but excluding cost of reinforcement and also including supply of all materials, labours T&P etc. required for proper completion of the work. As per MORT&H Sr. No. 12.11F(iii). (Including Royalty, labour cess but excluding GST.)

R.C.C. work in M-35 in Substructures with cement, approved coarse sand & 2cm. Gauge well graded grit including necessary shuttering ,placing and fixing of reinforcement and also including supply of all materials, labours T&P etc. required for proper completion of the work. As per MORT&H Sr. No. 13.05H (Including Royalty, labour cess but excluding GST.)

PCC below aaproach Slab with 2 cm gauge approved stone ballast , approved coarse sand and cement in the proportion of 1:2:4 including supply of all material, labour and T&P etc. required for proper completion of work. As per P.W.D. S.I. No. 279A (Including Royalty, labour cess but excluding GST.)

M-35 grade reinforced cement concrete in approach slabs as per drawings and clause 1200,500&1700 of MoRTH Specifications 1500, 1600, 1700 & 2704 Sr. No. 14.11 (Including Royalty, labour cess but excluding GST.)

Cement concrete with 4 cm gauge approved stone ballast , approved coarse sand and cement in the proportion of 1:4:8 including supply of all material, labour and T&P etc. required for proper completion of work in V.T. base. As per P.W.D. S.I. No. 281. (Including Royalty, labour cess but excluding GST.)

Furnishing and placing RCC M-35 in superstructure as per drawing and T.S. with cement approved coarse sand & 2cm gauge well graded grit including necessary shuttering , placing & fixing of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply material , labour and T&P etc. required for proper completion of the work. As per MoRTH Sr. No. 14.01E (Including labour cess, Royalty but excluding GST.)

Providing RCC Crash Barrier With M-35 Grade cement concrete Including Reinforcement & Dowel Bars complete as per approved drawings and technical specifications. As per MoRTH Specifications 800 Sr. No. 14.11 (Including labour cess, Royalty but excluding GST.)

Providing and laying Cement concrete wearing coat M-35 grade including reinforcement as per MORT&H Specifications 2702 complete as per drawing and Technical Specifications. As per MoRTH Specifications 2702 Sr. No. 14.04 (Including Royalty, labour cess but excluding GST.)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation, Sub Structure & Super Structure complete as per Drawing and Technical Specifications. As per MORT&H Specification 1600 & 2200 Sr. No. 12.42 (Including labour cess but excluding GST.) In Foundation

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation, Sub Structure & Super Structure complete as per Drawing and Technical Specifications. As per MORT&H Specification 1600 & 2200 Sr. No. 12.42 (Including labour cess but excluding GST.) In Substructure As per MORT&H Specification 1600 & 2200 Sr. No. 13.6.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation, Sub Structure & Super Structure complete as per Drawing and Technical Specifications. As per MORT&H Specification 1600 & 2200 Sr. No. 12.42 (Including labour cess but excluding GST.) In Superstructure As per MORT&H Specification 1600 & 2200 Sr. No. 14.02

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation. As per MoRTH Specifications 2607 Sr. No. 14.21 (Including labour cess but excluding GST.)

Supplying & fixing of 100mm dia Drainage Spouts complete as per drawing and Technical specificationwork. As per MoRTH Specifications 2705 Sr. No. 9.20 (Including labour cess but excluding GST.)

Supplying fitting & fixing in position to line and level elastomeric bearing of approved Company/ Manufacturer conforming to IRC : 83(Part-III) section-IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specification. As per MoRTH Specifications 2000 & 2200 Sr. No. 13.16. (Including labour cess but excluding GST.)

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. As per MoRTH Specifications 800 Sr. No. 14.16 (Including labour cess but excluding GST.)

First Class Brick Work in 1:6 Cement Fine Sand mortar for making Dhula for well curb , Reference Pillar, centre Pillar,Bench Marks etc. As per P.W.D. S.I. No. 303 (Including Royalty, labour cess but excluding GST.)

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical Specification. As per MORT&H Specification 2504 Sr. No. 16.05. (Including labour cess, Royalty but excluding GST.)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. As per MORT&H Specification 2504 Sr. No. 16.04 (Including labour cess, Royalty but excluding GST.)

Excavation in foundation of ordinary soil (Loam,clay or sand) including lift upto 1.50 M and lead up to 30 M including all labour, T&P etc required for proper completion of work as per S.I. No. 251 (Including labour cess but excluding GST.)

Cement concrete with 4 cm gauge approved stone aggregate, coarse sand and cement in proportion 8:4:1 in foundation, mechanically mixed and vibrated including supply of all material, labour and T&P etc. required for proper completion of work. (as per SI No. 281) (Including Royalty, labour cess but excluding GST.)

M-150 class brick work in 1:3 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (as per PWD SI No. 307) (Including Royalty, labour cess but excluding GST.)

Cement concrete with 2 cm gauge approved stone aggregate, coarse sand and cement in proportion 4:2:1 including supply of all material, labour and T&P etc. required for proper completion of work. (As per PWD SI No. 279A) (Including Royalty, labour cess but excluding GST.)

12 mm thick plaster with 1 part of cement and 3 part of coarse sand over brick work including supply of all materials, labour and T&P etc. required for proper completion of work. As per PWD SI No. 583 (Including Royalty, labour cess but excluding GST.)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads upto 2 Km, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Including labour cess but excluding GST.)

Construction of Granular Sub-Base grading-I conforming to table 400-1 of MORTH Specification by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete. As per MORTH Specification Clause 401 Sr. No. 4.01B. (Including Royalty, labour cess but excluding GST.)

Providing, Laying, Spreading and Compacting Graded Stone Aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MORT&H Specification Clause 406A Sr. No. 4.14. (Including Royalty, labour cess but excluding GST.)

Providing and applying Primer Coat with bitumen emulsion (SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. As per MORTH Specification Clause 502 Sr. No. 5.01 (Including labour cess but excluding GST.)

Providing and applying Tack Coat with Bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with air compressor complete. As per MORTH Specification Clause 503 Sr. No. 5.02. (Including labour cess but excluding GST.)

Providing and laying Dense Graded Bituminous Macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading-II (Nominal Size-26.5 mm) conforming to Table 505 of MORTH Specification, premixed with bituminous binder VG-30 @ 4.50 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a Mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete. As per MORTH specification clause 505 Sr. No. 5.04. (Including labour cess, Royalty but excluding GST.)

Providing and laying Bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading-II (Nominal Size-13.2 mm) conforming to Table 507 of MORTH Specification premixed with bituminous binder VG-30 @ 5.40 percent of mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction. As per MORTH specification clause 507 Sr. No. 5.05. (Including labour cess, Royalty but excluding GST.)

Please Enable Macros to View BoQ information