ARMO works at FSD New Ankai complex during the year 2026-27(SH- Repairs to rolling shutters, godown ancillaries and other misc repairs including pre-post monsoon repairs) (2nd call)

Repairing of roof of godowns with water proofing material such as Bitumen felt/bitumen/tarplastic or any other water proofing material etc approved by the Engrin charge with and including replacement of bitumen washer and tightening of 'J' hooks & nuts wherever required (Details of cost for 5000 MT capacity godown)to be carried out throughout the contract period.

Repairing and maintenance of G.I. profile sheet roofing of godown with material such as silicon sealent, self drilling / tapping screws of size 5.5x55 mm with EPDM seal, including greasing of turbo ventilators as and when required complete as per the directions of Engineer in charge. (Details of cost for 5000 MT capacity godowns))to be carried out through out the contract period.

Cleaning of internal drains, Nallah storm water drains (of all sizes) etc for smooth flow of water including disposal of rubbish outside the premises with all leads and lifts as per direction of Engineer in charge. (The drains are to keep clean during the full period of contract)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having tthermal stability for hot & cold water supply includung all CPVC plain & brass threaded fittings . This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer - in charge. External work (A) 25 mm nominal outer dia pipes

Providing and filling in position elastomeric crack filler compound Confirming to ASTM C 834-91 For sealing of construction joints inindusrial/ warehouse panel flooring all complete as per direction of Emgr-In- Charge

Filling and plugging of rodent burrows/chambers inside godown floors and platforms by flushing with water, placing approved rat repellent cake inside the burrow, filling with mixture of bentonite, cement and iron filings in approved proportion, prepared in hand operated mixer, compacting with tamping rod in layers, and finishing the surface flush with adjoining floor with neat cement floating coat, complete as per directions of Engineer-in-Charge.

Providing and fixing G.I. wire mesh of 0.60 mm dia conforming to IS: 280 and IS: 1568 in patches of required size to plinths and platforms after dismantling the existing cement plaster around rodent burrows/channels, including dressing the edges, fixing the mesh with suitable G.I. nails, and re-plastering the area with 15–25 mm thick cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) conforming to IS: 2250, to match the existing thickness, line and level, including making good the surface complete as per directions of Engineer-in-Charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing 6 mm AC sheet in roofing including dismantling damaged / broken AC sheets upto any pitch and fixing with polymer coated 'J' or 'L' hook bolts& nuts 8 mm dia G.I. plain and bitumen washer etc. complete as per direction of Engineer in Charge including cutting sheets to required size and shape whereever required and stacking the dismantled AC sheets etc complete.

Providing and fixing ridges and hips in asbestos cement sheets roofing close filling adjustable ridges complete all as directed by Engr in charge.