Renovation Work of Nirikshan Bhawan T.P. Nagar Distt, Agra.(Lot-01)

Amount

Dismantling old pointing or plaster/tiles including racking of joints with disposal of refuse within a distance of 60 m.

Dismantling of Brick masonry in cement mortar including stacking of dismantled material within a distance of 60m as directed by Engineer-in-Charge.

Dismantling Cement concrete work with disposal of refuse within a distance of 60m as directed by Engineer-in-Charge.

Dismantling old damaged flooring including disposal of refuse within a distance of 60 m.

Earth work in foundation in dry ordinary soil (loam clay or sand) including lift up to 1.5 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineer-in- charge up to a distance of 30M from the foundation

Earth work in filling with dressing in repairing of damaged /depressed portion area with the cost of transported earth charges, lead ,lift and manual compaction etc. required for proper completion of work.

M-100 Brick work in 1:4 Cement sand mortar with old & used brick (bricks supplying by dept) including cost of all materials, labour,T&P etc. required for proper completion of work.

M-100 Brick work in 1:4 Cement sand mortar including cost of all materials, labour,T&P etc. required for proper completion of work.

12.5 mm thick Cement plaster with 1:4 Cement sand mortar on brick work including cost of all materials, labour, T&P etc. required for proper completion of work.

Providing & Laying in 1:3:6 PCC with Stone grit 20-40mm size including cost of all materials, labour,T&P etc.required for proper completion of work.

Providing & Laying 1:2:4 CC with Stone grit 10-20mm size including cost of all materials, labour,T&P etc. required for proper completion of work.

4 cm thick Cement concrete flooring in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 20mm nominal size) laid in one layer finished with floating coat of neat cement complete

10 cm thick (average)mud phaska of damped brick earth on roof laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay:1 cow dung )and covered with flat tile bricks ,grouted with cement mortar 1:3 (1 cement:3 fine sand )mixed with 2% of integral water proofing compound by weight of cement and finished neat with common burnt clay F.P.S (non modular) brick tile of class designation 10

Supplying and fixing hold fast including cost of material.complete

Supply of fixing ceramic glazed floor tile of size 300x300 mm (thickness to be specifiedby manufacturer) of ist quality conferming to I S:15622 of approved make in colours such as White,Ivory ,Gray,Fume,Red,Brown,laid on 20 mm thick cement sand mortar 1:4 (1cement :4 course sand) joint with gray cement slurry @3.3 kg/sqm including pointing the joints with white cement and pigment etc complete

Refixing of main gate of inspecton house including making required hole pass including cost of labour T & P etc complete

Finishing walls with Putty approved brand and manufacture and of required shade and undacorated wall surface to give even shade over including curing and cost of all material, labor, T&P etc. required for proper completion of work.

Wall painting (two coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoroughly brushing the surface clean all of dirt, grease loose pieces and prepare smooth.

Distemper two coats with oil bound distemper of approved brand & manufacture of required shade after throughly brushing the surface free from mortar droping including all supply of from material, labour,t&p,scaffolding etc complete.

Finishing walls with Exterior Emulsion Paint (Apex) on new surface of approved brand and manufacture and of required shade on undecorated wall surface to give even shade over @1.25 Ltr/10sqm including one coat of primer [email protected] Ltr/10sqm including curing and cost of all materials, labour, T&P etc. required for proper completion of work for two coat.

white washing of two coats including all cost of labour & T & P etc complete

Application of one coat of primer on old steel surface including scraping of old paint, cost of material, labour, T&P, safety measure etc complete.

Application of one coat of primer on old wooden surface including scraping of old paint, cost of material, labour, T&P, safety measure etc complete.

Application of two coats of high gloss enamel paint of approved brand & manufature, including cost of material, labour T&P, safety measure etc complete.

Providing and fixing 4 mm glazing in , windows, ventilator shutters etc. with Glass putty/beading etc. complete.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:

S/Fixing 600x450 mm baveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to including fixing etc complete

P/F pvc west pipe for washbasin & sink basin including pvc flexible pipe 32mm dia

P/Fixing ,10 ltr capacity low level pvc cistern including all interal fitting ,peryware,cert,dip last etc required for proper completion of the work

P/F pvc conection pipe with brass union 450 mm long 15 mm dia complete

Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing .C.P. Brass pillar tap 15mm dia of approved quality complete.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing 100 mm dia Stainless Steel grating of approved quality and colour.

Providing & fixing Glass shelf 7/32" thick 600x130mm size with C.P. guard rail of standard size of bracket complete

Providing & fixing C.P. brass towel rail 750x20mm together with pair of C.P. brass brackets to fit the towel rail. Complete

P/F Ball valve brass of approved quality ,high or low pressure with plastic floats complete 25 mm nominal bore

Providing and fixing steel but hinges with screws etc complete

75 mm long

125 mm long

Providing & fixing aluminium sliding bolts with 9mm rod & screw 200 mm long .

Providing & fixing aluminium tower bolts with 10mm rod & screw 80 mm long . complete :

Providing and fixing aluminium door handle withscrew 125 mm long . complete :

P/Fixing wash basin with C I or M S brackets ,15 mm c p brass pillar taps 32 mm C P brass waste standard pattern including painting of fittings and brakets cutting holes and making good the walls whenever required

White vitrious flat back wash basin size 550x400 mm with single 15 mm C P brass pillar tap

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls, painting etc.

15 mm nominal dia pipes

25 mm nominal dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

16 mm nominal outer dia pipes

25 mm nominal outer dia pipes

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Supply & fixing of 32 mm flush door commercial quality conforming of IS 2202 part I (1983) including fixing of wooden cleats and stopers and including fixing and adjustment of hinges, bolt,locks handles,springs, fitting with necessary screws to be supplied departmentlly.

Providing and fixing 32 mm panelled shutters for doors, made with sal wood battened ,ply wood including cost of material ,labour,t&p & fixing with butt hinges of required size with necessary screws, , all complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately)

Providing and fixing 30 mm glaged shutters for window /ventilator, made with sal wood battened ,4 mm glass panes including cost of material ,labour,t&p & fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately)

Providing and fixing 30 mm wire mesh shutters for window /ventilator, made with sal wood battened ,mosquto/fly proof stainless steel grade 304 wire mesh including cost of material ,labour,t&p & fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately)

Providing and fixing wire mesh in shutters for door,window /ventilator with mosquto/fly proof stainless steel grade 304 wire mesh including cost of material ,labour,t&p & fixing with wooden bedding required size with necessary screws, all complete as per direction of Engineer-in-charge.

Centring & shuttering for c c work

Inverter Wiring in wiring points for light/Fan/Plug / with 1.50 sqmm. Copper wire

Supplying & fixing CAT -AAA L E D Tube light 22 watt with batten suitable for 22 watt LED tube light including all material ,labour T &p and dismetling old tube light etc complete

Rubbing of TBCD office marble floor including cost of , labour,T&P etc. complete

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.

Same as item No.(58) but for fan and light duty exhaust fan.

Same as item No.(58) but for two way light point.

Wiring points for call bell point with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and modular type switch and 2 pin socket etc.

Same as item No.(58) but for 5 amp plug point with piano type switch and 5 Pin socket etc.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer

Supply and wiring of submain 2 number 2.5 sq.mm. FR PVC insulated 1100V grade multisrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 nos. 1.5 sq. mm. FR PVC insulated 1100 V grade multisrtand single care copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable but in 20 mm dia heavy duty (2 mm thick) PVC conduit with one No. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth contuiity wire drawn in conduit complete in all respect.

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect.

Supplying & fixing C I cover with out frame for manholes chamber

600x600 mm rectangular

450x450 mm rectangular

BHAVYA ENTERPRISES