Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-Finance | ₹37.9 L | L1 | Accepted-Finance NOT LOWEST |
| 2 | L2₹38.3 LRejected-Finance 38 30 92 SAI NAGAR MARRIPALEM VISAKHAPATNAM 530 018 | VISAKHAPATANAM | ANDHRA PRADESH | 530018 | ₹38.3 L | L2 | Rejected-Finance LOWEST |
| 3 | L3₹38.8 LRejected-Finance GANESH MURTI NAGAR PART 3RD ROOM NO 103 CAPT PRAKASH PETHE MARG CUFF PARADE MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | ₹38.8 L | L3 | Rejected-Finance NOT LOWEST |
| 4 | L4₹39.3 LRejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | ₹39.3 L | L4 | Rejected-Finance NOT LOWEST |
| Sl No | Description | Qty | Unit | Nilesh Construction L4 | POOJARANI ELE-TECH L3 | Anjali Constructions L2 | N.S.ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Note :- (i) Work to be carried out on GL to 8th floor (incluing terrace of building) from ground level. (ii) Rate for Scaffolding and Safety System for labour are included in quoted raes by Contractor. (iii) Safety Net and Water Proofing covering materials shall be arrange by Contractor while working at Site and it will be deem fit in quoted rats by Contractor.
Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed. | 19 | Cum | 600 ₹11,400 | 300 ₹5,700 | 560 ₹10,640 | 300 ₹5,700 |
| 2.00 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 380 | Sqm | 45 ₹17,100 | 50 ₹19,000 | 35 ₹13,300 | 50 ₹19,000 |
| 3.00 | Demolition of brick/Stone masonary work built in Cement Mortar including in all quoins etc and precast concrete articles complete all as specified and directed. | 10 | Cum | 600 ₹6,000 | 300 ₹3,000 | 550 ₹5,500 | 300 ₹3,000 |
| 4.00 | Demolition of Stone slab and tiles of any description of any thickness in floor complete all as specified and directed. | 1 | Ten Sqm | 400 ₹400 | 1,000 ₹1,000 | 350 ₹350 | 1,000 ₹1,000 |
| 5.00 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. | 20 | Sqm | 40 ₹800 | 300 ₹6,000 | 30 ₹600 | 300 ₹6,000 |
| 6.00 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed. | 4 | Each | 60 ₹240 | 100 ₹400 | 50 ₹200 | 100 ₹400 |
| 7.00 | Taking down chowkats with shutters (without taking off shutters from frames) area of opening exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed. | 6 | Each | 80 ₹480 | 100 ₹600 | 70 ₹420 | 100 ₹600 |
| 8.00 | Dismantling wall & ceiling boards (fibre, insulation etc.) or insulation boards, slabs, blankets any thickness including cover fillets complete all as specified and directed. | 350 | Sqm | 10 ₹3,500 | 100 ₹35,000 | 15 ₹5,250 | 50 ₹17,500 |
| 9.00 | Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed. | 5 | Qtl | 620 ₹3,100 | 400 ₹2,000 | 650 ₹3,250 | 300 ₹1,500 |
| 10.00 | Taking up or down 15mm/20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed | 80 | RM | 15 ₹1,200 | 20 ₹1,600 | 10 ₹800 | 20 ₹1,600 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹79,000
Closing Date
27 Mar 2026, 6:00 pmClosed
GARRISON ENGINEER DAMAN
Garrison Engineer Daman, Tat Rakshak Vihar, Dalwada, Nani Daman Post, Daman (UT) PIN 396210
ADDITION ALTERATION OF MSO AND ALLIED WORKS OF B/R AND E/M ITEMS AT OTM COMPLEX, AGARDANDA FOR ICGS MURUD JANJIRA.
2026_MES_754175_1
8902/E8
Open Tender
Civil Works
180 days
MURUD JANJIRA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER DAMAN
₹79,000
2 Apr 2026
25 Feb 2026
30 Mar 2026
25 Feb 2026
27 Mar 2026
12 Mar 2026
Note :- (i) Work to be carried out on GL to 8th floor (incluing terrace of building) from ground level. (ii) Rate for Scaffolding and Safety System for labour are included in quoted raes by Contractor. (iii) Safety Net and Water Proofing covering materials shall be arrange by Contractor while working at Site and it will be deem fit in quoted rats by Contractor. Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of brick/Stone masonary work built in Cement Mortar including in all quoins etc and precast concrete articles complete all as specified and directed.
Demolition of Stone slab and tiles of any description of any thickness in floor complete all as specified and directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed.
Taking down chowkats with shutters (without taking off shutters from frames) area of opening exc 1.5 Sqm but n.exc 4 sqm each complete all as specified and directed.
Dismantling wall & ceiling boards (fibre, insulation etc.) or insulation boards, slabs, blankets any thickness including cover fillets complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed.
Taking up or down 15mm/20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed
Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for fly ash Brickwork with subclass ‘B’ bricks, old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete urfaces in CM 1:4 mixed with water proofing compound finished even smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured seprately.
Supply only Integral water proofing compound
S&F of Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
M&L for Preparation of new steel surface of any description over 10 cm width or girth and applyin two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.
S&F 10mm thick toughened glass plain or tinted, as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.complete all fittings such as hinges,handles,floor spring etc all complete all as specified and directed.
M&L Plain fillets, square, rectangular in section exc 13 Sqcm but n.exc 25 Sqcm clean sawn secured with nails in Ilnd class soft wood complete all as specified and directed.
M&L Vitrified coloured tiles 8-10mm thick any Shade (square/rectangular) area of each tiles exc 0.18 Sqm but not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 laying floor finishes, complete all as specified and directed.
Ditto all as per item No.21 area of each tiles exc 0.18 Sqm but not exc 0.36 Sqm as in vertical surface such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 to recieve tiles complete all as specified and directed
M&L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular ) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm over and including 15mm thick screed bed in Cement mortar 1:6 in floors etc set and jointed in neat cement slurry and in white or coloured cement to match the surface complete all as specified and directed.
M&L for Glazed ceramic coloured joint free tiles 450x300X7-8mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
S&F 605mm x 605mm GI frame work for seamless celling snap grid frame work for false ceilling with all necessary angle & Tee arrangement with and incl fixing cleats screw etc complete all as specified and directed.
S&F hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof by means of celling complete all as specified and directed.
S&F False celling 8mm thick (Non asbestos fibre cement building board) fixed in celling flat or sloping inserted in GI/aluminium frame work complete all as specified and directed. (Make-Armstrong,saint Gobain)
S&F in repair prelaminated, particle board 18/19mm thick exterior grade prelaminated one side with decorative choice lamination fixed with nails timber frame work complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part-I complete all as specified and directed.
S&F aluminium anodised tower bolt of extruded section of length 150mm and fixed complete all as specified and directed.
S&F aluminium anodised tower bolt of extruded section of length 100mm and fixed complete all as specified and directed.
S&F aluminium anodised handle of length 100mm and fixed complete all as specified and directed.
S&F to 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F Powder Coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron).anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.
S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron) anodised aluminium window(three track) and ventilator shutters, cupboard shutter without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed.
M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
Supply and fix 5.50mm thick plain glass exc 0.5 sqm in each pane fixed to aluminium windows and iron frame complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S&F in repairs Rotational moulded polyethylene water storage tanks 500 litre capacity, three layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified and directed.
S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair 25mm dia drapery rod fancy type powder coated wooden finish/Stainless Steel fixed to wall with wooden finale and brackets incl ends dooms of approved pattern and colour complete all as specified and directed.
M&L for Preparing newly plastered surfaces of wall and applying two coats of acrylic base exterior grade (100% Acrylic) over a coat of primer complete all as specified and as directed.
M&L preparation of new plastered surfaces and applying two coats oil bound distemper over a coat of alkaline resistent primer over and including a coat of 3mm thick wall care putty to the surface complete all as specified and directed.
M&L preparation of old plastered surfaces by complete removal of existing treatment and applying two coats oil bound distemper over a coat of alkaline resistent primer surface, complete all as specified and directed.
M&L for 16-18mm thick granite (of any type) work (table rubbed and polished) stone slab as in steps, jambs, pillars, window-cills, cooking platforms and like over and including cement screed bed 15mm thick in CM (1:6) including pointing in white cement (1:2) using marble dust to match with marble shade complete all as specified and directed.
S&F in repairs door closer hydraulically regulated aluminium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed in anoy length with rubber ring laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified as directed.
S&F PVC (SWR) bend 110mm dia radius complete all as specified and directed.
S&F PVC (SWR) bend 75mm dia radius complete all as specified and directed.
S&F for GI tubing 15mm bore, medium grade ISI marked with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) (heavy grade ISI Marked), fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.
Description all as per item above but 20mm dia
M&L for Plain Cement concrete 1:3:6 mix type C1 (Using 20mm graded stone aggregate)cast in situ, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
S&F in repair PVC connections 15mm size with PTMT nuts of length 375mm complete all as specified and directed.
S&F for 15mm stop valves cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for union complete all as specified and directed.
S&F 15mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F Vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc complete all as specified and directed.(excluding cost of flush tank)
S&F in repirs in Low level PVC flushing cistern 10 Ltr capacity syphonic action type, white with inlet ball valve float and handle including bracket complete all as specified and directed.
S&F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screw down high pressure, with or without lettred hot or cold with long screwd for iorn pipe and fixed complete all as specified and directed.
Reinforced cement concrete 1:2:4 type B-1(using 20mm graded aggreagate) Beams, cantilevers, bressumm ers, lintels over 1.5m span all as specified and directed .
M&L for form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work n exc 200 mm tnick ( Horizontal or sloping) flat rough finished surfaces complete all as specified and directed.
M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto, but 6mm to 8mm dia in striups,spacers and binder
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (40mm graded) as in fdn filling and mass concrete complete all as specified and directed.
M&L 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size with gray cement no pigment conformed to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.
M&L for sand cushion filling for floor, foundation etc including watering and consolidation complete all as specified and directed.
M&L PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of interlocking tiles complete all as specified and directed.
M&L for Hardcore of broken stones or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC 100mm thick type D-2 1:4:8 (40mm graded agregade) as in sub base complete all as specified and directed.
(a) One light controlled by one switch
(b) One ceiling/exhaust fan controlled by one switch
(c) One 6 Amp socket point controlled by one switch on Independent Board
M & L for point wiring complete with proper colour coding using 1100 Volts grade 2.5 sqmm PVC insulated FRLS-H unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marking in and including IN PVC Conduit, concealed, ISI marked with all accessories fixed in wall/ceiling/roof/floor etc , with modular white cover plate and frame of module suitable for mounting of 3 pin socket 16 Amp, Independent including 2.5 Sqmm PVC insulated FRLSh unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed . Make for copper cable - Plolycab, KIE, finolex ,Universal cables.
S&F Ceiling rose with surface bakelite ,65 x 50 mm polycarbonate, isolated body, two/ three terminals with ISI mark all as specified and directed. Make : SSK/Havells/Plaza/Anchor.
S&F Moduar switch 6 Amp , 1 way , 1 module complete all as specified and as directed.
S&F Moduar socket 6 Amp , 2 module, 2/3 pin complete all as specified and as directed.
S&F Moduar switch 16 Amp , 1 way , 1 module complete all as specified and as directed.
S&F Moduar Socket 6/16 Amp ,2/3 pin combined , 2 module complete all as specified and as directed.
S&F fan regulator modular type, 240 V , two module with steps in increasing speed order complete all as specified and directed.
S&F ceiling fan, complete with blades, down rods of suitable length upto and below false ceiling , anchor fastener for fixing, accessories, 230 V, 1200 mm sweep, with squirrel cage induction motor complete in all respect.
Supply and fix fan rod of length 0.3 mtr below the false ceiling complete all as specified and as direcetd.
Material and labour for submain wiring along with earth wire using 2x 4.0 sq mm (colour coading) + 1x 4.0 sq mm earth wire (green colour) of single core PVC insulated multistrand copper conductor 1100 Volts grade FRLS-H type in and including PVC Conduit of size not less than 25 mm dia (isi marked) , concealed with all accessories such as bend, junction boxes, short pipes of suitable size complete all as specified. Note: Three run of 4.0 sqmm cable and one run of PVC conduit will be measured as one unit.
Material and labour for submain wiring along with earth wire using 2x 2.5 sq mm (colour coading) + 1x 2.5 sq mm earth wire (green colour) of single core PVC insulated multistrand copper conductor 1100 Volts grade FRLS-H type in and including PVC Conduit of size not less than 25 mm dia (isi marked), concealed, with all accessories such as bend, junction boxes, short pipes of suitable size complete all as specified. Note: Three run of 2.5 sqmm cable and one run PVC Conduit will be measured as one unit.
Supply and fix MCB DB SPN ,double door, IP-42 ,12 Way having earth terminal, neutral bus terminal for 12 way circuits complete in all respect mounted on wall including making connection with legs/thimbles all as specified and directed by engineer-in-charge.
S & F MCB SPN 63 Amps , 10 KA , 240 V in CB Box complete all as specified and direced by engineer-in-charge. Make - legrand/Schneider/Hanger
S & F MCB SP 06-32 Amps , 10 KA , 240 V in CB Box complete all as specified and direced by engineer-in-charge.Make - legrand/Schneider/Hanger
Supply and fix Decorative Wall Mounting with different finishes with Soda Glass Type including 4 W T32 LED Lamp with E27 base suitable for fixing the lamp complete all as specified by engineer-in-charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including cutting of falce ceiling any type connecting up with driver three core flexible copper conductor cases of suitable size complete.
Supply and fix LED recess square light 8 inch x 8 inch 9 in aluminium die cast housing , Lumen efficiency 70 lumen/watt complete including cutting in false ceiling and fixing all as specified by engineer-in-charge.
Supply and fix flexing LED strip 24 W, Warm/blue/red/green/pink , high britness, with uniformity of lights, including connecting with connectors complete all as per site requirement and colour as required at site as assigned by engineer-in-charge.
Supply and fix LED strip driver 12 V, 2A constant voltage for 24 W strip including connection to LED strip complete all as per site requirement and colour as required at site as assigned by engineer-in-charge.
SITC of MCCB sub panel indoor type, CPRI approved cubicle panel board IP-52 free wall/floor mounted made out of 2mm thick CRCA sheet, duly powder coated, compartmental design with locking arrangements, weather/vermin proof with proper ventilation slots, foundations and fixing MS channel complete of suitable size and comprising of following items: (a) Incomer - MCCB 100 Amps 25 kA, Icu=Ics, Thermal magnetic release type, O/L, S/C protection -01 Nos (b) Outgoing MCB SPN 63 Amps 10 kA, 415 Volts -04 Nos (c) Busbar 200A alluminium TPN with colour coded heat shrinkable sleeves (d) Indication lamps for RYB Phases-01 set Complete (e) Voltmeter and Ammeter digital type including fixing on wall and making all connections all as directed by engineer-in-charge.
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 35 sq mm.
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 70 sq mm.
Material and labour for submain wiring along with earth wire using 2x 6.0 sq mm (colour coading) + 1x 6.0 sq mm earth wire (green colour) of single core PVC insulated multistrand copper conductor 1100 Volts grade FRLS-H type in and including PVC Conduit of size not less than 25 mm dia (isi marked), concealed wiring with all accessories such as bend, junction boxes, short pipes of suitable size complete all as specified. Note: 03 run of 6.0 sqmm cable and one run of PVC conduit will be measured as one unit.
supply fixing and testing of Changeover switch 4 pole , 100 Amps with sheet metal enclosure including cable connection complete.
supply and fix led double lense Flood light 210 Watt, at any height 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers and making core cutting complete with making core cutting all as specified and directed.
Supply and fix in repair LED tube light fitting 1X 20 Watt including LED light, complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible copper conductor cable of 0.75 Sqmm size and PVC square block for fixing LED tube fitting complete all as specified and directed.
Supply and fix in repair LED tube light fitting 1X 10 Watt including LED light 10 watt, complete with all accessories internally pre-wired, connecting up with and including three core sheathed flexible copper conductor cable of 0.75 Sqmm size and PVC square block for fixing LED tube fitting complete all as specified and directed.
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 10 sq mm.
Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 25x4 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Part-I provision of G I Pipe 40mm bore eight grade for protection of GI strip and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1, CI cover 1:2:4 type B1,excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value, complete all as specified and directed.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm galvanised iron/steel earth strip complete all as directed.
Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron earth lead of 4 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Part-I provision of G I Pipe 40mm bore eight grade for protection of GI strip and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1, CI cover 1:2:4 type B1,excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value, complete all as specified and directed.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm galvanised iron/steel earth strip complete all as directed.
M&L for point wiring with ISI marked 1.5 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade FRLSh type drawn through and incl stove enamelled steel conduit of 25mm dia with all accessories incl PVC insulated, unsheathed, single core, multistranded copper conductor and shall be connected to common earth dolly complete from MCB DB all as specified and directed for one light point controlled by one switch.
All as per item No 1 above but with 2.5 sqmm controlled by flame proof switch socket and plug 16 amps.
S&F Switch flame proof rotary type with termination box in LM6, 16 Amp, single pole 250 volts, all as specified and directed.
S&F flame proof-weather proof switch socket and plug combined 16 Amp , 250 Volts (2P+Earth), all as specified and directed.
Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 30 W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
BOQ_844726.xls
BOQ • 1.99 MB
RAR.rar
Tender Documents • 1.37 MB
Download all tender documents and submit your bid