RESTORATION TO DIFFERENT TYPES OF CHAIRS INCLUDING CANNING, PAINTING AND POLISHING HELD FOR OFFICERS, PBOR AND OTM ACCN AND RESTORATION OF CERTAIN ESSENTIAL FURNITURE ARTICLES OF HOSPITAL PATTERN UNDER GE (EAST), MATHURA

Amount

Removal of following existing unserviceable cane/old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. Note :- Work shall be executed where the furniture exist in different User Units under AOR of GE (East) Mathura including BSO's Furniture Yard as directed by Engineer-in-Charge. CHAIR DINING ,FD-279,262,228,FD/MAP-II/05

S&F in repairs back rest all as per drawing.

S&F in repairs leg stiffener all as per drawing.

S&F in repairs front leg all as per drawing.

S&F in repairs rear Leg all as per drawing.

S&F in repairs rail all as per drawing.

Removing the existing unserviceable cane plastic from the chair dining,tightening the loose joints of each chairs by pinning,screwing, nailing, wedging and glueing,placing every part in-tact and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm thick cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. Note : Frence polish shall be measure and paid seperately under relavent of item of BOQ.

Removing the existing unserviceable/broken PVC seat from the chair and supply and fixing new PVC seat 4mm thick after providing sufficient corner support and one additional stiffener at centre for support of PVC seat.The PVC seat shall be fixed with proper screws and good workmanship.Due care shall be taken while fixing the PVC seat, the gaps if appears be filed with putty mixed with adhesive so as to make the upper surface smooth and tidy. The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/COMFO/HARMONY

M&L for preparation of wooden surfaces by scratching the entire wooden surface of chair dining, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the chair shall be tighten, properly cleaned and smoothened before polish and applying french polish to high glossy finish complete all as specified and as directed by Engr-in-Charge.

Removal of following existing unserviceable cane/old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR EASY,FD-229, 358, 1108

S&F in repairs rear leg all as per drawing.

S&F in repairs front Leg all as per drawing.

S&F in repairs rear seat all as per drawing.

S&F in repairs stiffener all as per drawing.

S&F in repairs back rest all as per drawing.

S&F in repairs arm all as per drawing.

Removing the existing unserviceable cane plastic from the chair easy,tightening the loose joints of each chairs by pinning,screwing, nailing, wedging and glueing,placing every part in-tact and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm thick cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable cane/old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR WRITING,FD-261, 280, 250, 1107

S&F in repairs back rest all as per drawing.

S&F in repairs leg stiffener all as per drawing.

S&F in repairs front Leg all as per drawing.

S&F in repairs rear Leg all as per drawing.

S&F in repairs rail all as per drawing.

S&F in repairs arm all as per drawing.

Removing the existing unserviceable cane plastic from the chair writing,tightening the loose joints of each chairs by pinning,screwing, nailing, wedging and glueing,placing every part in-tact and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm thick cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable cane/old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact as applicable as per drgs. CHAIR VERANDAH:-FD-19M,256,359,259,FD/MAP-II/06

M&L for Spot gas welding to broken parts/joints of chairs.

Removing the existing unserviceable cane/niwar plastic from the chair verandah and recanning the chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern The canning of chairs shall only be carried out after complete painting process as specified as specified in drg. MAKE OF CANE- SHAH,PREMIER Note:- Painting shall be measured & paid separetely under relevant item of this BOQ.

Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair.

Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/COMFO/HARMONY

M&L for painting the frame of the chairs by applying one coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.

Removal of following existing unserviceable old broken wooden/ply components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR WOODEN BOTTOM W/O ARMS FD-56/225

S&F in repairs back rest all as per drawing.

S&F in repairs leg stiffener all as per drawing.

S&F in repairs front leg all as per drawing.

S&F in repairs rear Leg all as per drawing.

S&F in repairs rail all as per drawing.

Removing the existing unserviceable/broken seat of chair without disturbing the adjacent parts ,supply and fixing 6 mm thick commercial ply for seat of chair with standard workmanship.

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable cane/old broken wooden/ply wood components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion, as applicable as per drgs. CHAIR DINING CUSHIONED FOR OFFRS, FD/E6/MAP/10

S&F in repairs back rest all as per drawing.

S&F in repairs teak wood vertical stiffener all as per drawing.

S&F in repairs front Leg all as per drawing.

S&F in repairs rear leg all as per drawing.

S&F in repairs stiffener all as per drawing.

S&F in repairs "L" bracket 04 nos in each chair of size 75mmx75mm shall be fixed to rail and legs for making the chair more strudy and durable.

S&F in repairs of seat made of 12mm thick BWR plywood over which 40 density cool foam 75mm thick shall be provided duly covered with best quality tapestry cloth not less than `200/- per metre as approved by BSO/GE.

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish "L" bracket size 75mmx75mm shall be fixed at right angle of legs and rails complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR EASY CUSHIONED:- FD-358

S&F in repairs back rest all as per drawing.

S&F in repairs front Leg all as per drawing.

S&F in repairs fear leg all as per drawing.

S&F in repairs arm all as per drawing.

S&F in repair seat made of 12mm thick plywood over which 40 density cool foam, 75mm thick shall be provided duly covered with best quality tapestry cloth not less than `200/- per metre as shown on drg and fixed on top of side rails by screws. All as directed by BSO

S&F in repair back made of 12mm thick plywood over which 40 density cool foam, 75mm thick shall be provided duly covered with best quality tapestry cloth not less than `200/- per metre as shown on drg and fixed on top of back rails by screws. All as directed by BSO

M&L for prepartation of wooden surface by scratching the wooden surface, filling putty for the bore holes making surface smooth by scratching it with sand embery paper and applying french polish to high glossy finish complete all as specified and directed by Engr-in-Charge.

Removal of following existing unserviceable old broken components seat and back of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR STEEL TUBULAR WITH ARMS : FD-75(M)

M&L for preparation of steel surfaces of chair and applying one coat of synthetic enamel olive green paint Complete all as specified and as directed by Engr-in-Charge

S&F 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat alongwith supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm.

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

S&F in repair first class Hard wood teak Arm rest as per drg

S&F in repair hard rubber shoes as per drg

S&F in repair rubber cap for conduit pipe as per drg

Removal of following existing unserviceable old broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact, as applicable as per drgs. CHAIR STEEL TUBULAR WITHOUT ARMS : FD-75(M)

M&L for applying one coat of synthetic enamel olive green paint after preparation of steel surfaces. Complete all as specified and as directed by Engr-in-Charge

S&F 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm

S&F in repair hard rubber shoes as per drg

S&F in repair rubber cap for conduit pipe as per drg

Removal of following existing unserviceable steel/cane/old broken wooden components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components, as applicable as per drgs. CHAIR CB STEEL PADDED WITH ARMS, FD-75(M)

M&L for applying one coat of synthetic enamel olive green colour after preparation of steel surfaces. Complete all as specified and as directed by Engr-in-Charge

S&F in repair of seat of the chair made out of 12mm plywood. The plywood shall be fixed over wooden frame made out of batten of size 40mmx20mm with nail and adhesive. The entire structure shall be covered with 100mm foam cushion and overwhich best quality tapestry cloth not less than ` 200/- per metre shall be fixed as directed by Engr-In –Charge. 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. The seat shall be fixed in between the frame with nut bolts and washers.

S&F in repair of back of the chair made out of 6mm plywood. The plywood shall be fixed over wooden frame made out of batten of size 40mmx20mm with nail and adhesive. The entire structure shall be covered with 50mm foam and over which best quality tapestry cloth not less than ` 200/- per metre shall be fixed as directed by Engr-In –Charge. The seat shall be fixed in between the frame with nut bolts and washers.

S&F in repair arm of the chair made out of 25mm thick teak wood in the shape of the arm.The arm shall be covered with 50mm foam and over which best quality tapestry cloth shall be fixed as directed by Engr-In –Charge. The arm shall be fixed over the conduit pipe and to be screwed from below.

S&F in repair hard rubber shoes as per drg

Removal of following existing unserviceable components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components, as applicable as per drgs. CHAIR EASY STEEL, FD-121(M)

M&L for continuous Gas welding as required per 10 cm long.

Supply and fixing in repair new seat made of 12mm plywood over which 75 mm foam cushion shall be fixed with adhesive .The foam and plywood shall also be covered with best quality tapestry cloth shall not be less than `200 meter as approved by BSO and GE irrespective of what is shown on drg. The complete seat shall also be tightening on seat frame with 08 screws.

S&F in repair first class Hard wood teak Arm rest as per drg

Supply and fixing in repair new back made of 12mm plywood over which 75 mm foam cushion shall be fixed with adhesive .The foam and plywood shall also be covered with best quality tapestry cloth not less than `200 per metre as approved by BSO and GE, irrespective of what is shown on drg. The complete back shall also be tightening on back frame with 04 screws.

Materials and labour for applying one coat of synthetic enamel black color on all steel portion of form including arm including preparation of steel surface complete all as specified and directed.

S&F in repair shoes all as per drg

Removal of following existing unserviceable broken components of furniture item carefully without disturbing the adjoining parts and Supply and fixing new components in lieu of dismantled components, as applicable as per drgs. CHAIR WRITING, FD/E6/MAP/12

Removing unserviceable damaged Seat & back of Chair writing. Supply and fixing the seat&back made of 12 mm thick hot pressed plywood upholstered with fabric shall not be less than `200 meter and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

M&L for painting the entire frame with one coat of synthetic enamel paint 1st quality including preparation of surface of chair writing officers including handle all as directed by Engr -in -charge.

Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

S&F in repair new Rubber stopper at bottom all as directed and specified by Engr -in -charge

Removal of following existing unserviceable broken components of furniture items or similar item, as applicable as per drgs. CHAIR COMPUTER, FD/E6/MAP/01

Removing unserviceable damaged Seat & back of Chair computer, supply and fixing new seat and back made of 12 mm thick hot pressed plywood upholstered with fabric not less than `200/- per metre and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge

Removing old unserviceable arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in –charge.

Removing unserviceable base along with castor twin wheels and S&F new base along with new castor twin wheel suitable for chair computer all as directed by Engr-in-charge.

Removing unserviceable adjustable tilting mechanism and S&F new adjustable tilting mechanism shall be forward tilt, self regulating tilt tension and manual override, 4 position tilt lock. Anti shock back mechanism to prevent backrest. 360 swivel mechanism to allow with fluid lateral movement suitable for chair computer all as specified and directed by Engr -in charge.

Removal of following existing unserviceable broken components of furniture item, as applicable as per drgs. CHAIR SCHOOL WITH HAND BOARD, FD/E6/MAP/05

M&L for applying one coat of synthetic enamel grey colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge,

S&F new One piece PVC seat and back and fixing the same by providing four screws as described in drg. Make of Seat-Blow plast/Nilkamal/supreme

S&F new 18mm thick prelaminated particle board top open able/hand board with 4mm thick teak wood edging and fixing the same by providing hinges/screws as described in drg

S&F in repair hard rubber shoes as per drg

Removal of following existing unserviceable broken components of furniture item, as applicable as per drgs. CHAIR REVOLVING EXECUTIVE (LOW AND HIGH BACK)/CHAIR CONFERENCE TP & FD/E6/MAP/01

Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick and fabric not less than `200/- per metre over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair.

Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant.

Removing the old unserviceable complete pedestal assembly (Complete Base) along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly (complete base) along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of five wheel coasters for smooth running of chairs and shall have gas lift mechanism.

Removal of following existing unserviceable broken components of furniture item, as applicable as per drgs. CHAIR WRITING STEEL, FD-360

M&L fo continuous Gas welding as required per 10 cm long.

Supply and fixing new seat made of 12mm plywood over which 100 mm foam cushion shall be fixed with adhesive .The foam and plywood shall also be covered with best quality tapestry cloth not less than ` 200/- per metre as approved by GE irrespective of what is shown on drg.The complete seat shall also be tighten on seat frame with 08 brass screws.

First class Hard wood teak Arm rest as per drg

Supply and fixing new back made of 12mm plywood over which 75 mm foam cushion shall be fixed with adhesive .The foam and plywood shall also be covered with best quality tapestry cloth not less than `200/- per metreas approved by BSO and GE, irrespective of what is shown on drg.The complete back shall also be tighten on back frame with 04 brass screws after removing the old unserviceable back.

Materials and labour of one coat of synthetic enamel black color on all steel portion of form including arms, complete all as specified and directed.

M&L for French polishing one coat to the following furniture articles all are of MES pattern or Similar items incl applying wax for depressed surface before polishing/painting all as specified and shown on drgs and directed by Engineer-in-Charge.Work will be executed where the furniture exist in Officers Married accn including OTM Accn and in different User Units under the jurisdiction of GE (E) Mathura including BSO's Furniture Yard as directed by Engineer-in-Charge.

FD-245,Bed Niwar with MNF Set but excluding to MNF Set same is measured and paid under item No. 18.01

FD-279,Chair dining

FD-229,Chair easy

FD-280,Chair writing

FD-233,Hat stand with mirror

FD-236,Peg Table

FD-281,Sofa set (4 seater cushioned)

FD-281,Sofa set (5 seater cushioned)

FD-282,Stool dressing

FD-248,Table bed side

FD-274,Table centre

FD-273,Table Dining 6 persons

FD-273,Table Dining 8 persons

FD-230,Table Dressing Gents

FD-378,Table Dressing ladies

FD-249,Table Writing

FD-264,Bed hard

FD-232,Teapoy

M&L for applying one coat of synthetic enamel paint to the following furniture articles including preparation of steel sruface all are of MES pattern or Similar items all as specified and shown on drgs and directed by Engineer-in-Charge. Work will be executed where the furniture exist in Officers Married accn including OTM Accn and in different User Units under the jurisdiction of GE (E) Mathura including BSO's Furniture Yard as directed by Engineer-in-Charge.

FD-245,Bed Niwar with MNF Set but only MNF Set

FD-1029, Locker Bed Side Steel

FD/E6/MAP/18, Almirah large steel

FD-1032,Almirah Steel medium

FD/E6/MAP/02(R),Rack shoe steel

FD-255,Teapoy Verandah

Removal of following existing unserviceable steel/wooden/ unserviceable components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for leveled surface, placing every part in-tact and painting the disturbed portion, as applicable as per drawings. (a) For all items of BOQ viz 20.01 to 37.03 (b) Work shall be executed where the furniture exist in different User Units under AOR of GE (East) Mathura including BSO's Furniture Yard as directed by Engineer-in-Charge.

Couch Examination (HFD-2019)

S&F in repair of 75 mm thick PU foam cushion of 32 density duly covered with leatherite in two pieces i.e, Head portion (450mm x 510mm) and other portion(1445 mm x 510 mm) as approved by GE. Make of PU Foam : Kurlon, Sleepwell, Coir Foam

M& L for preparation of old steel surfaces and applying one coat of synthetic enamel Paint in white colour complete all specified Make: Asian, Nerolac, Burger

S&F in repair of MS Handle for drawers and cabinets of size 100mm with Bush HDP

S&F in repair of Drawers of couch

S&F in repair of pull out tray for BP Instrument

M&L for continous gas welding as required per 10cm length.

Cylinder Trolley, TP

S & F of Castor wheel of size 100 mm Dia made up of rubber

M&L for continous gas welding as required per 10cm length.

M& L for preparation of old steel surfaces and applying one coat of synthetic enamel Paint in white colour complete all specified Make: Asian, Nerolac, Burger

S&F in repair PVC Handle of size 100mm

Table Steel Size 1000 x 750 x 750 mm, TP

S&F in repair New Legs made up of stainless steel Tubular steel jointing with Gas welding

S&F in repair Top of Table made up of 16 Gauge Stainless steel sheet of table size

S&F in repair of Hard Rubber shoe

M&L for continous gas welding as required per 10cm length.

Stool Steel Adustable, TP

S&F in repair Top of stool made up of 18 Gauge Stainless steel sheet

M& L for preparation of old steel surfaces and applying one coat of synthetic enamel Paint in white colour complete all specified Make: Asian, Nerolac, Burger

S&F in repair of Hard Rubber shoes of black colour of size 25mm

S&F in repair of adjustable mechanism of stool steel

M&L for continous gas welding as required per 10cm length.

Table Tubular Frame with 4 Coaster, TP

S&F in repair of Castor of size 75mm

S&F in repair top of table made up of 16 Gauge Stainless steel sheet of table size

S&F in repair New Legs made up of stainless steel Tubular steel jointing with Gas welding

M&L for continous gas welding as required per 10cm length.

Screen Movable three fold, TP

S&F in repair of Hinges

S&F in repair of Castor of size 50 mm of swivel type

M& L for preparation of old steel surfaces and applying one coat of synthetic enamel Paint in white colour complete all specified Make: Asian, Nerolac, Burger

S&F in repair of Green Colour cloth or as approved by Engr-in-charge/GE

S&F in repair of Hooks and spring arrangements

M&L for continous gas welding as required per 10cm larger.

Patient Trolley/ Emergency Trolley, HFD- 2017

M& L for preparation of old steel surfaces and applying one coat of synthetic enamel Paint in white colour complete all specified Make: Asian, Nerolac, Burger

S&F in repair in repair of Aluminium plates bottom with PU Foam covered in blue colour with matress guard

S&F in repair of MS Tray

S&F in repair of Hydraulic Pump of MS for lifting up and down

S&F in repair of PVC grip handle in Black colour

S&F in repair of SS telescopic saline rod Intravenous

S&F in repair of 200 mm castors of swivel type with brakes on two

M&L continous gas welding as required per 10cm length.

S&F in repair Crank operated height adjustment handle at one end

Intravenous Fluid Stand, TP

S&F in repair of Castor of size 100mm

M&L for continous gas welding as required per 10cm

M& L for preparation of old steel surfaces and applying one coat of synthetic enamel Paint in white colour complete all specified Make: Asian, Nerolac, Burger

S&F in repair of 12mm bar for hanging Intravenous Fluids

S&F in repair of Rotating wheel for adjusting IV Fluid bar

Lateral Filling Cabinet, HFD- 2038 / FD-397

S&F in repair of drawers of filling cabinet of size 914 x 330 x 463 mm

S&F in repair of 10 lever cam lock make: Godrej, Harrison

S&F in repair of nickel chrome plated ball slides,anti tilt &anti rebound mechanism for smooth running of Drawers of Lateral Filling Cabinet.

Repair & Denting of Filing cabinet

M& L for preparation of old steel surfaces and applying one coat of synthetic enamel Paint both internally & externally of existing colour. Make: Asian, Nerolac, Burger

M&L for continous gas welding as required per 10cm length.

Rack Adjustable 5 shelves and 4 components (TP)

S&F in repair new back to rack five shelves and 4 components steel made of 1mm thick MS sheet of size equal to the height of the rack fixed in between vertical angle iron with nut and bolts.

S&F in repair new sides to rack five shelves and 4 components steel made of 1mm thick MS sheet of existing size of sides of the rack fixed in between vertical angle iron with nut and bolts.

S&F in repair new shelves to rack five shelves and 4 components steel made of 1mm thick MS sheet of existing size of the shelves of rack fixed in between vertical angle iron with nut and bolts.

Materials and labour for preparation of old steel surfaces and applying one coat of synthetic smoke grey Paint or existing color on all steel portion of rack complete all as specified and directed by Engr-in-charge.

Table Steel Size- 1500 x 750 x 750 mm, TP

S&F in repair top of table 18mm thick prelaminated particle board and shall be provided with teakwood edging all around the top of size 1500 x 750 mm

S&F in repair Legs of table made up of 32mm Square Mild steel tube of wall thickness 1.6mm

S&F in repair Stiffeners at the top of table made up of 32mm Square Mild steel tube of wall thickness 1.6mm

S&F in repair Stiffeners at the bottom of table made up of 32mm Square Mild steel tube of wall thickness 1.6mm

M&L for continous gas welding as required per 10cm length.

S&F in repair of Hard Rubber shoe

Materials and labour for preparation of old steel surfaces and applying one coat of synthetic enamel Paint of existing color on all steel portion of table after steel surface of table with sand/ emery paper complete all as specified and directed by Engr-in-charge.

Bed Stead Iron Hospital, HFD- 2001

S&F in repair Castors of Size 100 mm dia with brakes on opposite corners.

S&F in repair both sides Prelaminated Particle Board of size 19 mm thick at head & foot bows as per drg.

S&F in repair Mechanically operated handle, fixed height with back rest adjustment.

S&F in repair Handle at foot end to wound lever operated back rest.

M&L for continous gas welding as required per 10cm length.

S&F in repair Legs 32mm dia Tubular Steel

Materials and labour of one coat of synthetic white paint or existing color on all steel portion of Bed complete all as specified and directed by Engr-in-charge.

S&F in repair of MS Sheet of 18 SWG for base of bed with 2 Section top

S&F in repair of 1 Epoxy coated IV Rod

S&F in repair of mosquito net Rod

Table Bed Side, Type- II, HFD- 2005

S&F in repair new top of existing size made of 1.25 mm thick SS sheet with raised edges of 20 mm on three sides all as per drg placed in position at top and fitted with through gas welding or as per drawing.

S&F in repair new front shutter made of 1mm thick MS sheet as shown in drg.

S&F in repair new brass knob 25mm dia chromium plated in shutter of table as shown in drg

S&F in repair new rubber shoes of 1" RD of high quality placed in position as shown in drg.

S&F in repair of new legs of 25mm square tube of MS 1.6mm thick and 760mm long by continuous welding to table bed side all as per drawing

Materials and labour for one coat of synthetic enamel white paint or existing color on all steel portion of table bed side including drawer rest all and directed by Engr-in-charge.

S&F in repair back of table bed side steel of size 610mmx550mm of 1mm thick MS sheet as shown in drg with continuous welding at sides with legs.

Table 90 x 60 cm Stainless Steel on Castor, HFD- 2014

S&F in repair Shelves made of SS Sheet of 18 Guage

S&F in repair Castors of Size 200 mm dia

S&F in repair top of table made up of Stainless steel sheet of 16 Guage of Size 90 x 60 cms

S&F in repair Railing Rod 10 mm dia made of SS.

S&F in repair of support tube 19 mm dia of SS

S&F in repair Black cap made of 1" RD HDPE.

S&F in repair shelf trap screws of size 13 mm

S&F in repair SS Bowl and tray to be fitted in lower shelf of the table.

Trolley Hot Food, FD- 133(M)

S&F in repair Wheel of Size 200 mm dia with fixed barkes

S&F in repair Cabinet for 12 Trays

S&F in repair Drawers of Size 300 x 600 x 130 mm

S&F in repair SS panelling with hair line finished sheet of 20 SWG film coated.

S&F in repair Shelves of 18 SWG

S&F in repair top made up of SS Sheet of 16 SWG

S & F New SS Angle Frame of 25 x 25 x3 mm thick.

Chair CB Steel HFD- 2045

Scratching the entire frame of chair, and applying one coat of synthetic enamel existing colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge

S&F in repair seat of the chair made out of 12mm plywood. The plywood shall be fixed over wooden frame made out of batten of size 40mmx20mm with nail and adhesive. The entire structure shall be covered with 100mm foam cushion and overwhich best quality tapestry cloth shall not be less than `200 per meter shall be fixed as directed by Engr-In –Charge. 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. The seat shall be fixed in between the frame with nut bolts and washers.

S&F in repair back of the chair made out of 6mm plywood. The plywood shall be fixed over wooden frame made out of batten of size 40mmx20mm with nail and adhesive. The entire structure shall be covered with 50mm foam and over which best quality tapestry cloth shall not be less than `200 per meter shall be fixed as directed by Engr-In –Charge. The seat shall be fixed in between the frame with nut bolts and washers.

S&F arm of the chair made out of 25mm thick teak wood in the shape of the arm.The arm shall be covered with 50mm foam and over which best quality tapestry cloth shall not be less than `200 per meter shall be fixed as directed by Engr-In –Charge. The arm shall be fixed over the conduit pipe and to be screwed from below.

S& F in repair of LDPE end cap as per drg

M&L for continous gas welding as required per 10cm

Trolley For Laundry, Type-I, HFD-2070

S & F in repair of steel mess clading alround the laudry of over all size 930 x 630 x 800 mm

S & F in repair of swivelling type ball bearing wheels

S & F in repair of Tubular handle made up of hard plastic / Zinc plated / SS

M&L for continous gas welding as required per 10cm length.

Materials and labour of one coat synthetic enamel paint of existing color on all steel portion of trolley for laundry after preparation of surface by scratching the entire surface with sand / emery paper, complete all as specified and directed by Engr-in-charge.

Sofa Chair Tubular Steel, TP

M& L for preparation of old steel surfaces and applying one coat of synthetic enamel Paint or existing colour surface of sofa chair with embery/ Sand paper. Make: Asian, Nerolac, Burger

Taking out old pressed /torn old cushions from each sofa chair and Supply 32 density thick foam cushion of size 21”x22”x4” duly covered with good quality tapestry all over(Not less than Rs 200 per metre)cloth of approved color and shade. Make of Cushion :- Sleep well/kurlon/Nindiya).

M&L for continous gas welding as required per 10cm length.

Anand Construction

ms Jyoti traders

ANUBHAV BUILDERS