Construction of New Public Library at Bharathidasan Salai, Alwarpet, Chennai

Amount

DISMANTLING WORK

Dismantling , removing and carefully stacking Doors & windows including removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling brickwork manually by mechanical means including stacking of serviceaboe material and disaposal of unservice material within 50 meters lead as per direction of Engineer in charge.

Dismantling & removing the existing Reinforced Cement Concrete work etc., by using required mechinaries including stacking of steel bars and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge.

Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 10 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in- charge.

Dismantling & removing the existing Plain Cement Concrete work etc., by using required mechinaries and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge.

CIVIL WORKS

Providing and constructing cast in situ hydraulic bored piles of 600mm diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³ in accordance with the structural engineers drawings and directions, but exculding reinforcement including cost of mobalization of all necessary plants, equipment's like piling rigs, temporary casing of appropriate length for setting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method duly through all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site with out any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required etc ., Conducting standard penetration test to identify the refusal strata for atleast 1 pile in group and atleast 25% of piles, comparing with refusal strata as indentified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap).

Supply Conducting Pile integrity tests (PIT) on the piles under each cluster by using a 6 lbs nylon tipped hand held hammer, glueing sensitive accelerometer on top of the pile by petro wax or petroleum jelly after making the pile head smooth and even by disc grinder, providing stage wise and final report along with relevant conclusions etc ., as directed by Client / Engineer-in-charge. as per IS 2911 (Part- IV) - 2013 ect.

Carrying out initial working pile load test on specified dia piles as specified in IS:2911 (Part 4). Includes all plant, equipment, machinery, instruments, measuring devices, platforms and kentledge pile caps etc ., dismantling and carting away entire setup, excavation and dewatering etc ., all complete. 600 mm dia - Safe vertical load capacity -60 MT - (for 25RM)

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum

Supplying and filling in foundation and basement with excavated soil other than sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc.,

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc.,Rate to include all materials, labour charges, wastages , placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Client / Engineer-in-charge.

Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members

For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 of 400kg/m3 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. Rate to include all leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer in charge

For foundation & basement

IN GROUND FLOOR

IN FIRST FLOOR

IN SECOND FLOOR

IN TERRACE FLOOR

IN HEAD ROOM

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supply and constructing Fly ash Brick masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure using Fly ash Bricks of size 230x110x75mm etc. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

For Foundation Basement

IN GROUND FLOOR

IN FIRST FLOOR

IN SECOND FLOOR

IN TERRACE FLOOR & HEAD ROOM

Compound Wall

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

TERRACE WATERPROOFING: Supply and laying water proofing treatment for terrace covering the following order and consisting of following operations. i) Making ' V' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement.The roof slab / gutter slab shall be thoroughly cleaned to remove debris and dust, and applying 2 coats not less than 2 mm of polymer based Elastomeric Coating like TAPECRETE - RTU compound and cured for 7 days and followed by a layer of 20 mm thick cement mortar 1:3 admixed with CICO NO:1 (or) other approved equivalent make shall be spread over the prepared surface. On the spread mortar provide and lay well burnt brick bats (COBA) to a average minimum thickness of 55 mm (i.e .. minimum 40 mm thickness at lower end and 70 mm thickness at higher end). An additional layer of brick bat (COBA) shall be laid over the existing brick bat COBA surface if required to get the required gradient for adequate drainage giving a slope of approximately 1 in 120, which will be measured separately under relevant item. The gap between brick bat shall be filled with cement mortar 1:4 admixed with waterproofing compound like CICO NO:1 or approved equivalent afterwards curing shall be carried out for two days a final layer of cement mortar of 1:3 admixed with water proofing compound like CICO NO:1 or approved equivalent make shall be laid to a thickness of 20 mm and draw a false line of 300 mm x 300 mm. The parapet side wall / gutter wall shall be thoroughly cleaned to remove all dust particles and a layer of 15 mm thick C.M 1:3 shall be laid to a height of about 300 mm above the top of the terrace/ Gutter slab on the Parapet / Gutter side wall admixed with water proofing compound like the CICO NO:1 or approved equivalent make. Providing, supplying, mixing, applying two coats of ready to use two component Acrylic polymer modified cement based, flexible, water proofing slurry like or approved equivalent to a thickness of 2 mm over the plastered surface of operation as per manufacturer's specification and as directed.(Plan area of Terrace only will be measured for payment )

Finishing the top of roof with one course of Solar Reflective ceramic tiles of size 305 mm x 305 mm x 7 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Providing two legged scaffolding using 15cm dia casuarinas post of 4M overall length (3M Height + 0.5M Projection + 0.5M into the Ground the distance between the two rows being 1.25M and the spacing of posts being 2.0M in both the rows with two horizontal posts with 0.5M. Over lap on either side and braces at 2.0M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1M width, etc. ina complete from using coil and nails.

Upto 3 M Height

For every additional height of 2.5 M (3m - 5.50m)

For every additional height of 2.5 M (5.50m -8.00m)

For every additional height of 2.5 M (8m -10.5m)

For every additional height of 2.5 M (10.5m -13m)

For every additional height of 2.5 M (13m -15.5m)

Supply and fixing Shade net (Green Net) for under construction of high rise building

Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case steps, landing slabs etc with CM 1:3 (One cement and three sand) 10mm thick including hacking the surfaces and providing necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the Departmental Officer. S.I. 309 -- TNBP No. 55& 56

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering 15 mm thick for external surfaces with cement mortar 1:5 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and laying with best quality the following materials of Machine Polished granite slab of 18 mm thick (Fine Polished Steel Grey Granite Slab) including cutting and edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Polishing and Double Nosing the Granite Slab To Half Edge to round shape and finishing the surface neatly etc. complete complying with standard specification as directed by department officers

JOINERIES

Pressed steel door Frame made out of 1.6mm thick Galvanised Steel Sheet conforming to IS: 277-1981 and with MS angled steel shutter. Also providing and fixing 1mm thick m.s. sheet to T-iron frames for door shutter, of mild steel Tee sections, joints mitred and welded with 15 x 3mm lugs 10cm long embedded in cement concrete blocks 15 x 10 x 10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate of 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. The door shall be finished with one coat of Etching primer, one coat of zinc chromate primer and two coats of synthetic enamel paint of approved shade and color. The door shall be provided with necessary fixtures.

D3 - Single Leaf Door (0.9mx2.40m)

D2 - Doble leaf door(1.65mx2.40)

Steel Fire Doors and Frames Acoustic Performance Doors have to guarantee acoustic performance, special attention should be paid in the all-around door´s perimeter. In order to avoid weakening the sound insulation of walls, all the acoustic doors, shall have an all-round rubber seal (acoustic kit) and when higher acoustic performance is required, a helical door hinge to ensure the right seal in the bottom side. Steel fire doors & frames & assemblies. Vision Panels, frame trim in doors. Submittals Product Data: For each type of door and frame indicated, include door designation, type, level and model, material description, core description, construction details, label compliance, sound and fire-resistance ratings, and finishes. Shop Drawings: Show the following: Elevations of each door design. Details of doors including vertical and horizontal edge details. Frame details for each frame type including dimensioned profiles. Details and locations of reinforcement and preparations for hardware. Details of each different wall opening condition. Details of anchorages, accessories, joints, and connections. Coordination of Doors with works of other Vendors & their requirements. Door Schedule: Use same reference designations indicated on Drawings in preparing schedule for doors and frames. Quality Assurance Steel Door and Frame Standard: Comply with CBRI testing standards, unless more stringent requirements are indicated. Fire-Rated Door Assemblies: Assemblies that are listed and labeled by a testing and inspecting agency acceptable to authorities having jurisdiction (CBRI), for fire-protection ratings indicated, based on testing according to IS 3614 Part 2. Delivery, Storage, And Handling Shutters to be wrapped in protective 70-micron polyethene sheets & duly strapped. All frames & shutters to be duly marked as per as per approved door schedule for easy identification at site.

The doors and frames shall be cardboard-wrapped or crated to provide protection during transit and job storage. Additional protection to prevent damage to finish of factory-finished doors and frames shall be provided. Inspect doors and frames on delivery for damage, and notify shipper and supplier if damage is found. Minor damages may be repaired provided refinished items match new work and are acceptable to Engineer in Charge. Damaged items that cannot be repaired shall be removed and replaced as directed. All knocked down frames shall be stacked flat & shutters vertically on minimum 4-inch- (100- mm-) high wood blocking under cover in ventilated areas. Provide spaces between stacked doors to permit air circulation. Sequencing and Scheduling Submit data and schedule at earliest possible date, particularly where acceptance of schedule must precede fabrication of units that must be built into other work. Products, Manufacturers, as per approved list Materials Steel Sheet, General: Thickness dimensions, including those referenced in IS 277, are minimums for both uncoated steel sheet and the uncoated base metal of metallic-coated steel sheets. Honeycombed Kraft paper core. Borosilicate clear toughened Glass. Primer: Manufacturer's standard rust-inhibitive primer, suitable as a base for specified finish paints such as Zinc Phosphate Stoving Primer (35 microns DFT) Thermosetting Paint (35 microns DFT) Anchors and Accessories: Manufacturer's standard units suitable for type of wall construction, and as follows. Provide square profile stops with mitered corners for glazing. Use galvanized items for units built into exterior walls. Provide countersunk flat or small oval head fasteners where exposed to view.

D3A - Single Leaf Door (1.0mx2.40m)

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mmto have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply and fixing of M.S Grills with Doors and Windows and compond wall grills with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Executive Engineer before use on work

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Painting the new plastered walls with two coats for Interior Plastic Emulsion paint approved quality and colour over a priming coat, with two coats of wall putty including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting etc complete complying with relevant standard specification and as directed by the Departmental Officers

ElevationPainting the wall with Texture Finish Paint including labour charge

Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 3 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Pavers of Size 200X200X65mm Using M30 Concrete Placed Over 50mm Thick Crushed Stone Sand (M Sand). The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Filling of All Joints With Labour Charges Etc.

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges et

Supply & Fixing of Handrail using Modular Glass Railing System for Top & Bottom, 6mm Clear+1.52 PVB+6mm Clear Laminated Toughened Glass Polish with necessary accessories.

FALSE CEILING WITH GYPSUM BOARD Providing and fixing suspended false ceiling using SAINT - GOBAIN GYPROC or Equivalent make which includes providing and fixing GI perimeter channel of size 0.50mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling, screw fixed to brickwall / partition with the help of nylon sleeved and screws at 610mm centres. Then suspending GI intermediate channels of size 45mm, 0.9mm thick with two flange of 15mm each from the sofit at 1220mm centres with ceiling angle of width 25mm x 10mm X 0.55mm thick fixed to sofit with GI cleat and steel expansion fasteners. ceiling section 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lops of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel

Gypsum Wall partition 75.0mm thick Gypwall Classic partition consist of Metal framework having maximum reachable height of 2500mm satisfying L/240 criterion at 200Pa, possessing fire rating of 30mins, tested in accordance to BS-476 Part 20 & 22 & sound insulation (Rw) of 40dB, tested in accordance to ISO 10140-2/ASTM E90 & spectrum adaption term as per ISO 717-1, having U-value of 0.645W/m²K & Medium duty rating as per BS 5234 part 2. Partition comprises of single layer, tapered edge Gypsum Board, certified GreenPro by CII & strategic location of manufacturing plants results in lower carbon emissions. Partition includes single layer of 12.5mm thick Gypsum board Plain ISI marked, conforming to IS 2095 Part 1:2011, having flexural strength – {Longitudinal > 500N & transverse > 180N} on both side of framing. Metal frame work, in compliance with BS EN 14195 & manufactured using CR1 Grade Steel as per IS 513, having yield stress of 300MPa & tensile strength of 340MPa with surface finish of AZ150 as per IS 15961/AS 1397 & tested for 500hrs of salt spray test as per ASTM B117, includes 48x34x36x0.5mm C-Stud with lip of 6.5mm, having moment of inertia 26627mm4 about major axis, positioned at 610mm c/c in 50x32x32x0.5mm Floor Channel & 50x32x32x0.5mm Ceiling Channel with flanges bend at 5° acute angle. Floor & Ceiling Channel is anchored with Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**, fixed at 600mm c/c in Center. 48x40x40x0.5mm Noggin Channel to be fitted at the horizontal joints of board. Boards to be Screw fixed with Drywall Screw of 25mm with 30nos per m2 at 300mm at center and 150mm at periphery. 25mm Glasswool of density 32kg/m3 shall be placed in Metal framework with the help of holding Clip. Edges & joints to be finished with jointing tape conforming to ASTM C475 & Paper tape. Periphery & cut-outs of the partition to be treated with suitable Acoustic Sealant. All the performance test are carried out at NABL accredited/ government approved lab.The Contractor shall submit shop drawing indicating anchorage system proposed along with supporting details for approval of the Engineer before commencement of works on site. Materials i. Gypsum Board PL 12.5x1219x1829 mm

Structural Glazing: Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm. Accessories: Brackets made of CRCA powder coated / electro plated should be used to fix vertical at top and bottom and vertical to slab as per site requirement. Polyurethane brackets should be used to connect horizontal section to vertical sections. Silicone: Natural cure, with good UV resistance to be used. The above frame should be fixed to brick / concrete masonry by using nylon self–expanding cap and driving MS electro plated 80mm long screws into the caps through frames. Glass: 5mm reflective Saint Gobain OR equivalent

Supplying and Installing Metal False Ceiling using Fire Retardant Galvanized Steel Sheet Plain lay in tile size 600mm x 600mm, 0.5mm thick, powder coated on external surface and shall have flange on all four sides to rest on the exposed grids. The system to give 600mm x 600mm centre to centre ‘T’. The ‘T’ shall be not be dipped GI Tee Section 3600mm long main Tee. 24mm wide and cross Tee panels are formed by running main runner of ‘T’ section of size 30mm x 24mm powder coated at bottom at intervals with powder coating atbottom. Necessary provision of inter locking of ‘T’ section are made at required intervals not exceeding 1200mm. The main runners are suspended from the ceiling by means of 4mm dia. GI rods fixed to the ceiling using anchor fasteners of 50mm x 8mm size with nylon inset and hooked to the main rubbers using clips. The last hangers at end of each rubber should not be greater than 600mm from the adjacent wall. The last panel shall be placed at the side wall using edge profile ‘L’ Angle of size 20mm x 20mm and fixed to the side wall the false ceiling should be fixed of same level and should present a neat look.(M-0689)

PLUMBING & SANITARY WORKS

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of 110mm dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Internal Water Supply - CP.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

20mm CPVC pipe

25mm CPVC pipe

32mm CPVC pipe

40mm CPVC pipe

50mm CPVC pipe

Supplying & fixing in position first quality & approved variety of 50mm dia C.P.V.C Ball Valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.

25mm dia CPVC valve

32mm dia CPVC valve

INTERNAL & EXTERNAL SEWAGE WORK

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.

160mm dia PVC soil pipe

110mm dia PVC soil pipe

75mm dia PVC soil pipe

50mm dia PVC soil pipe

TOILET FITTINGS

Supplying and fixing of Oval Shape Wash Hand Basin of size 560 x 450mm, including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. (The Wash basin should be got approved by the Executive Engineer before use on works.

Unloading, receiving, storing, installing, testing and commissioning of approved make stainless steel sink of size 600 x 450 x 200mm, 40 mm waste coupling , sink cock with connection pipe, 1 nos angular stop cock for cold water, MS bracket for mounting the sink and painting the bracket with two coats of enamel paint of approved colour over a coat of primer etc. Complete.(Pantry) Note :- MS brackets cost not included in the PHE BOQ, The same is included in the Civil BOQ.

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.

Supplying and fixing best approved quality Porcelain Soap Dish of size 150mm x 150mm x 50mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Suppling and fixing in position 15mm diameter brass bib cock tap of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Supply and fixing in position white European Water Closet of approved make with Porcelain low level flushing tank 12.5 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Supplying and fixing the best quality approved make of bip cock with C.P. health faucet wall hook one metre long flexible tube, angle cock with wall flange including cutting and making good the walls wherever required etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Executive Engineer before use on work.

Supplying and fixing White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge. (Make Jaguar URS-WHT-13253N or Equivalent)

Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).

Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap PVC Gully trap 'A' grade with cast iron double gratings of size 150 X 150 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).

Supply and fixing RCC precast slab manhole cover SFRC of 50mm thick and required size 900mm x 900mm made in CM 1:3 Ratio both direction including cost and conveyance of all materials, labour and transportation etc complete complying with standard specification.

Providing & construction Rain water recharge pit as per IS 24701 P1& II and relevant construction drawing. The pit shall be construction of RCC Rings with RCC top slab and PCC bed at bottom and Recharge pit Filling of 40mm jelly & sand Size of Recharge pit:- 1.2m dia x 2.4mdepth

Supply ,erection and testing & commisioning of 2HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge..( OHT Transfer pump)

Providing and Keep in stores Shifing to the place of station

100mm MS Puddle Flange

50mm MS Puddle Flange

40mm MS Puddle Flange

25mm MS Puddle Flange

Cp Angle Cock tap

INTERIORS & FURNITURES

Providing and laying modular carpet of 50x50cm made of STAT-NY-TRON®Xylon (high-performance plefin) yarn in machine tufted textured loop pile construction, dope dyed/CHROMOJET™ printing. There shall be glass fiber reinforced polymer (Eco-PowerbackTM ) secondary backing system having tufting substrate of Non Woven Felt-TufBOND® coated, guaranteed for 10 years against excessive wear and static, edge ravel, stain resistance, delamination and tuft bind as per product specifications. The rate shall be include finished in all respects with all materials & labour complete.

Providing and fixing 100 mm high "DMC" Aluminum (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thichness 1.30 to 1.50 mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

Aluminum Glass Partition - Aluminum Glass Partition (2100MM Height) Supply and Fixing of Slim Glass partition of 10/12mm Toughened Glass including frame, Profiles at Top & Bottom & at sides. The profile size to be 45x25MM to be fixed on to the floor/wall/ ceiling as per the architect design. Junction profile to be used at all Glass to Glass vertical joints, 90 Deg L Junction Profiles and T Junction profiles necessary as per design. In case of Glass overall panel Over panel Profile to be used. In case of Open glass edges End Profile to be used. The profiles shall be suitable for Glass thickness of 10/12/13. 52mm.The Profile shall be matt natural anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness Excluding 50-60 Micron of Powder coating. The works shall be carried out by utilization of profiles available with the manufacturer as per the approved list of makes. The installation shall be carried out with an installer certified / recommended by the manufacturer. The Contractor shall submit shop drawings for approval of Engineer-in-charge before commencement of works on site.

PIN UP BOARD

Brick Cladding

Mr Gypsum Panel For toilet partition

Automatic Sliding door operator, Make: ASSA ABLOY SL 500ST 4140 mm, design to meet ANSI/BHSM 156.10 standards and based on the product category rules :IBU: PCR automatic doors, automatic gates and revolving door system, PCR tested. The CE marking for the product takes into account the proof of conformity with harmonizes norms: EN 16005:2012/AC:2015: Power operated pedestrian door sets- safety in use- requirement and test methods, EN 61000-6-2:2005: Electromagnetic compatibility, EN 61000-6-3, EN60335-1, EN ISO 1849, EN 16005, IEC 60335-1, IEC 60335-2-103, UL 325, DIN 18650Environmental product declaration in accordance with ISO 14025 and EN 15804. Tested for Durability of 1 Million Cycles, for frameless glass door application, modular design including internal cover. and with 12 mm clear toughened glass for 1/ 2 Nos sliding door panel, Operator to be mounted on MS-Box Section/Equalant. Operator Finish should be Silver Anodized E6/C0, with operator dimensions Maximum (H x D) : 123x150 mm and of length as required to suit the opening size given below. The track profile should be separate from the main profile for enabling reduction in vibration insulation and easy maintenance. Microprocessor- controlled control unit, Self-learning. Maximum power consumption of 250W.Power Supply100-240V AC/ - + 10%/50/60 Hz. Auxiliary voltage of 24V DC, min. 1000mA Minimum clear opening width COW 800MM (single) and 1000mm (bi-part) Maximum clear opening width COW 3000mm. Minimum and maximum opening height 3000mm (higher on demand). Door weight single 240kg Door weight bi-parting door 2 x 200kg Opening and closing force Friction related, adjustable from 30 to 190N Height x Depth150mm (H) x 123mm (D). Opening and closing speed single 0.85m/sec (depends on perf. Level). Opening and closing speed, bi-part 0.85m/sec (depends on perf. Level). Hold open time 0 to 60 sec. Ambient Temperature -20 °C to +50 °C. Humidity max 85%.

Entance Door(3.00m x 2.40m)

Kids Library door(3.00m x 2.40m)

Book shelf rack 7ft height.PLPB FINISH RACK Top & Sides: 18mm Thk prelam partical board finishd board Back: 9mm Thk prelam partical board finishd board Edge: All exposed area with 2mm thick PVC edge lipping Shelf : 18mm Thk prelam partical board finishd board all shelf fixed type.

1200L X 300D X 2100HT

1500L X 300D X 2100HT

1800L X 300D X 2100HT

2850L X 300D X 2100HT

9600L X 300D X 2100HT

4165L X 300D X 2100HT

3150L X 300D X 2100HT

3600L X 300D X 2100HT

Table .Top panel : 25mm Thk prelam partical board finish Edge: All exposed area with 2mm thick PVC edge lipping finish. LEG : Loop leg 40*40mm size tube, tube thickness 1.6mm with powder coating finised. SUPPORT BEAMS : 40*40mm ms tube with 1.6mm thickness and with ms powder cioating finished.

1200L X 600D X 750HT

Pantry table.Top panel: 40mm Thk prelam partical board finish Edge: All exposed area with 2mm thick PVC edge lipping. LEG : Slant leg 40*40mm size tube, tube thickness 1.6mm with powder coating finised. SUPPORT BEAMS : 40*40mm ms tube with 1.6mm thickness and with ms powder cioating finished. Foot rest : 25mm thick square tube with ms powder coating finish.

1350L X 600D X 750HT

Librarian table.Top panel: 40mm Thk prelam partical board finish Edge: All exposed area with 2mm thick PVC edge lipping, Flip cover included. LEG : Loop leg 40*40mm size tube, tube thickness 1.6mm with powder coating finised. SUPPORT BEAMS : 40*40mm ms tube with 1.6mm thickness and with ms powder cioating finished. Wiremanagement system included.

2100L X 600D X 750HT

1500L X 600D X 750HT

Librarian table.Top panel: 40mm Thk prelam partical board finish Edge: All exposed area with 2mm thick PVC edge lipping, Flip cover included. LEG : Loop leg 40*40mm size tube, tube thickness 1.6mm with powder coating finised. SUPPORT BEAMS : 40*40mm ms tube with 1.6mm thickness and with ms powder cioating finished. Wiremanagement system included.

Main Table 1800L X 600D X 750HT Side storage 1950L X 600D X 750HT

10 Pax meeting tableTABLE TOP :25mm Thick Pre Laminated particle Board with 2mm PVC edge banding on all side with Flip Cover Hole Provision. (400mm Flip Cover). LEG : We can provide Slant type Legs, Tube thickness 1.6mm with ms powder coating finish. Middle Leg with Cable entry Box Provided. Supported Cross Bar 40*30mm Size tube with 1.5mm thick sheet and powder coating finish. Below Table top Box Type Raceway.

2800L X 750D X 750HT

6Pax meeting table.TABLE TOP :25mm Thick Pre Laminated particle Board with 2mm PVC edge banding on all side with Flip Cover Hole Provision. (400mm Flip Cover). LEG : We can provide Slant type Legs, Tube thickness 1.6mm with ms powder coating finish. Middle Leg with Cable entry Box Provided. Supported Cross Bar 40*30mm Size tube with 1.5mm thick sheet and powder coating finish. Below Table top Box Type Raceway.

1500L X 900D X 750HT

4pax meeting table. TABLE TOP :25mm Thick Pre Laminated particle Board with 2mm PVC edge banding on all side with Flip Cover Hole Provision. (400mm Flip Cover). LEG : We can provide Slant type Legs, Tube thickness 1.6mm with ms powder coating finish. Middle Leg with Cable entry Box Provided. Supported Cross Bar 40*30mm Size tube with 1.5mm thick sheet and powder coating finish. Below Table top Box Type Raceway.

900Dia, 750mm height

Centre table.TABLE TOP : Tempered Glass thickness 3/8″ , table is engineered wood

1200 L X 350 D X 430 HT

Round table.Table - Engineered wood

600 L x 300 D x 450 HL

Centre table round Centre table round .Table - Engineered wood

radius - 152 x 750 mm HL

4seater table rectangle

1200 L X 350 D X 750 HT

6 Seater sofa. Frame material: Solid sal wood, Secondary Frame material: 18 mm plywood, Seat construction: Elastic webbing belt, Seat filling material: 32 density foam, Upholstery material: Leatherette, Legs material: Plastic, backfilling material: Super Soft Foam.

1520 L X 650 D X 850 HT

2 seater sofa

1000 L X 600 D X 850 HT

3 seater sofa .Seat height 48cm Fabric material option in Synthetic fabric Come with 3 cushion pillow Solid wood frame structure

1820 L X 520 D X 850 HT

4 Seater sofa

2133 L X 520 D X 850 HT

Single seater.The EDGE Russo boasts a sleek design with soft PVC upholstery that exudes elegance. The chrome-plated legs add a touch of modern flair, while the klin dried solid hardwood and plywood frame ensures longlasting durability. Designed for ergonomic support, the EDGERusso features a 28- density hard FPA backrest that provides excellent lumbar support. The 32-density medium-soft foam seat offers a perfect balance of comfort and firmness, allowing you to sit comfortably for extended periods.

700 L X 700 D X HT

L Shape sofa .Neem wood and engineered wood construction for durable and sturdy build. Plush foam seats with zig-zag and pocket springs, supported by thick webbing. Soft velvet fabric upholstery on the body and printed flower fabric on the backrest. Spacious storage underneath the lounger provides ample room to keep essentials. Resilient and sturdy PVC legs offer stability and long-lasting use.

5116 L x 900 D x 750 HT

C shaped sofa

2260 L x 450 D x 750 HT

Fexible sofa

2615 L x 450 D x 750 HT

Circle desk

Dia - 940 mm x 500 HT

Kids wooden chair

200 L x 280 D x 320 HL

Chair

500 L X 500 D X 450 HT(Without Arm)

Running ledge table chair

500 L X 500 D X 750 HT(Without Arm)

Reception table

3327 L X 750 D X 750 HT

rolliing chair

550 LX 500 DX 450(Revolving chair)

Table chair

500 L X 500 D X 450 HT(Without Arm)

Meeting chair

450 Lx 450 D x 450 HT

Window seating with book rack

6400 L X 600 D X 450 HT

(3048 + 1828) L X 600 D X 450 HT

7010 L X 600 D X 450 HT

10668 L X 600 D X 450 HT

5181 L X 600 D X 450 HT

ELELCTRICAL WORKS

LT CT TNEB METER BOX: CT Metering Panel - Supply, installation, testing and commisioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS channels, fasteners, etc., including all associated control wiring. 1set of 250/5A CT with TNEB Metering provision and 1nos of 250/5A CT for APFCR.

250A Isolator Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of 250A TPN MCCB panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, (As per quotation)

MAIN LT PANEL: Supply, Installation, testing and commissioning of 3Phase, 415Volts, Main LT Panel board of Indoor, Cubicle floor mounting type made out of 2mm thick CRCA Sheet with powder coated finishing, MS base frame, double internal earthing arrangements, 250Amps, rating TPN Copper busbars with interconnection busbar, etc., comprising of the followings: EB Incomer : 1 No. 250Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOM DG Incomer: 1 No. 250Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOM Common C/O Incomer: 1 No. 250Amps, 4Pole Automatic Changeover Switch with EB ON and DG ON LED Indication lamps Metering : 2 Set of RYB LED Indication lamps 2 Nos. of Multifunction Meter with RS 485 2 Set of Current Tranformers (250/5A, Cl-1), 1 No. 250/5A CT for APFCR 2 Set of Control MCB and Electrical Interlocking between EB & DG Incomers Outgoings: 2 Nos. 100A, 25kA, TP+N, TM MCCB with Ext. RHOM (APFCR & Spare) 3 Nos. 63A, 25kA, TP+N, TM MCCB with Ext. RHOM (GF & FF AC, SPARE), 10 Nos. 32Amps DP MCBs (PDB-1&2, GF LDB-1&2, FF LDB-1&2, UPS, Ex.LDB, LIFT, SPARE)

Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. i.63A 4P MCB - 1 no. ii.63A 4P 30MA RCCB/ELCB - 1 no. iii.63A DP MCB Isolator -3 nos. iv.6A to 32A SP MCB - 24 nos. (SD629 / Pg 273)

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 6 nos. 32A 3P MCB , 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming and 6 nos. 63A 3P MCB, 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench/tray to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench / clamping.

Supply and Clamping of 3 1/2 core x 25 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Clamping of 3 1/2 core x 50Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 95 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 4 x 10 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 4 x 16 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 50sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 95sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 213 / Pg 86)

Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 213 / Pg 86)

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position.

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Higher End - PRIMARY POINTS

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Higher End - SECONDARY POINTS

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 2nos.6/16A two module socket , 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

LED LIGHTINGS

Supply, fixing, testing & commissioning of 18W LED ceiling Recess mounted - indoor luminaire with soft & uniform light distribution. Dimension : ⌀148mm X 50mm.Luminaire made of die-cast aluminium for better thermal management. Luminaire body finish with White expoxy polyster Powder Coated. High efficiency diffuser (Opal High Transimssion Diffuser) for glare free, uniform light distribution. Luminaire integrated with constant current LED driver. Cable entries for through-wiring of mains supply cable Prewired with LED driver and suitable for operation on 240V, 50Hz single phase ac supply. Operating voltage range (90 - 265V AC). LED driver efficiency should be greater than 83% with CRI greater than 80 and with colour temperature 4000K range. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor > 0.9, UGR < 19 complaince to LG7 guidelines. SDCM≤3. System consumption should be 18W LED fixture with lumen package of 1835 lumens (100 lm/W). The luminaire shall be wired with PVC unsheathed copper leads from terminal to the fitting. Luminaire should have NABL Certificate on Resitance to Flame & Ignition as per IS 10322 Part-1:2014. Mandatory CE Marking & BIS Certified. Make: K-LiTE (Model No. 3322).

Supply, fixing, testing & commissioning of 22W LED ceiling surface mounted - indoor luminaire with soft & uniform light distribution. Dimension : ⌀177mm X 43mm. Luminaire made of die-cast aluminium for better thermal management. Luminaire body finish with White expoxy polyster Powder Coated. High efficiency diffuser for glare free, uniform light distribution. Luminaire assembly integrated with constant current LED driver. Cable entries for through-wiring of mains supply cable Prewired with LED driver and suitable for operation on 240V, 50Hz single phase ac supply. Operating voltage range (90 - 265V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 and with colour temperature 4000K range. LED having 54,000 burning hours with minimum 70% lumen maintenance and power factor > 0.9 with THD less than 10% & UGR < 19 complaince to LG7 guidelines. SDCM≤3. System consumption should be 22W LED fixture with lumen package of 2497 lumens (110 lm/W). The luminaire shall be wired with PVC unsheathed copper leads from terminal to the fitting. Luminaire should have NABL Certificate on Resitance to Flame & Ignition as per IS 10322 Part-1:2014. Make: K-LiTE (Model No. 3613)

Supply, installation, testing and commissioning of 'DESTELLO 50 Recessed 25 W,1200mm L LINEAR LED light fitting, made out of CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive.

Supply, fixing, testing & commissioning of 20W Alpina Pendant Light Suspended LED luminaire with Extruded Aluminium (grade 6063) body with Die-Cast aluminium closing ring. Light colour temperature 4000K range. LED more than 90% lumen maintenance with Surge protection. The luminaire shall be IP40 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: All Indoor luminaire shall have NABL certificate on Resistance to Flame & Ignition as per IS 10322 part-1 :2014. Make: K-Lite Alpina Pendant Light.

Supply, fixing, testing & commissioning of 60W Designer Hanging Chandelier Light Suspended LED luminaire (multiple light sources at the end of metal rod). Light colour temperature 3000K range. LED more than 90% lumen maintenance with Surge protection. The luminaire shall be IP40 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: All Indoor luminaire shall have NABL certificate on Resistance to Flame & Ignition as per IS 10322 part-1 :2014.

Supply, fixing, testing & commissioning of Nebula Midi 12W Inground spike / Die-Cast Aluminium bracket mounted LED cylindrical luminaire with Die-Cast Aluminium alloy housing with clear toughened glass diffuser with operating voltage range (100 - 300V AC). LED driver efficiency should be greater than 80% with CRI greater than equal to 80 and with colour temperature 3000K range. LED having power factor more than 0.95 with THD less than 10% & Surge protection 4kV. The luminaire shall be IP66 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: Product should have Moisture arrestor and IP 68 Connector for on site connections. Luminaire should have Anti Glare Visor + Honeycomb assembly. Make: K-Lite KL-4257/4268.

Supply, fixing, testing & commissioning of 6W / 2x6W Wall mounted LED wall luminaire with Extruded & Die-Cast Aluminium body with clear toughened glass diffuser and Mirror finish pure Aluminium reflector. Operating voltage range (100 - 300V AC). LED driver efficiency should be greater than 80% with CRI greater than 80 and with colour temperature 3000K range. LED having power factor more than equal to 0.95 with THD less than 15% & Surge protection 4kV. The luminaire shall be IP65 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Make: K-Lite KL-3626.

Supply, fixing, testing & commissioning of 16W Bollard with concrete pedestal luminaire designed for surface mounted. Symmetrical light distribution. Luminaire made of square extruded aluminium tube (grade 6063) with pressure die cast aluminium components of high corrosion resistance and non corrosive stainless steel fasteners. Clear polycarbonate diffuser. Pressure die cast aluminium mounting plate 121 square x 4mm thick with 3 elongated holes 15 x 10 to suit M8 bolts at PCD 70 with pure polyester powder coating.The base plate have a cable entry hole of 30mm dia at the center. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 4-6KV. Luminaire dimension : 121mm square x 970mm height. CE & BIS Certified. Inhouse NABL accredited lab. KLite Model No. KL4728

Supply, fixing, testing & commissioning of 60W Juno-Column light luminaire designed for surface mounted. Shielded light distribution. Luminaire made of spun aluminium with extruded aluminium alloy (grade 6063) and non corrosive stainless steel fasteners. Translucent acrylic diffuser. Pressure die cast aluminium mounting plate 250mm dia round x 12mm thick with 4 elongated holes 38 x 19 to suit M16 bolts at CC 140 with pure polyester powder coating.The base plate have a cable entry hole of 65mm dia at the center. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >88%, Power factor >0.95, THD <10%, Surge protection 6KV. Luminaire dimension : 600mm dia round x 4500mm height. CE & BIS Certified. Inhouse NABL accredited lab. KLite Model No. KL7034

Supply, installation, testing and commissioning of 36 W, 900mm dia Circular LED pendant light fitting, made out of CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 450mm (18") Wall mounting 5 star rated complete(Higher end) with necessary accessories and hardwares as required.

Supply and fixing of 300mm (12") sweep(Heavy Duty) AC exhaust fan complete with necessary wall opening and making good of the wall .

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep AC exhaust fan

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and erection of Copper plate earthing station with GI pipe, 600x600x3mm thick copper plate, salt, charcoal, etc., including civil works, heavy duty CI Cover, etc., as per IS 3043 standards

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and Run of 1 of No.8 SWG copper wire for earth connection

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fasteners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements. The rate shall inclusive of necessary Wedge anchors threaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc, (8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement )

Perforated type Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300 mm width and 50mm height

Perforated type Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150 mm width and 50mm height

Supply and fixing of Raceways Metal / GI with 150mm width x 38mm height with Suitable Fixing bracket and Siutable Coupler Jiont with Connected all accessories complete work.

Supplying and fabricating of MS structural steel supports for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.

SAFETY ACCESSORIES

Supply and erection of '2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS (5 NOS)

Supply of First Aid Box complete with all First Aid Medicines

Supply and fixing of Shock Treatment chart with Glass frame

Supply and fixing of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle

Supply and fixing of Fire Extinguishers Co2, 4.5Kg confirming to TAC norms

Supply and fixing of Danger Boards (415Volts & 230Volts)

METAL SIGNAGE BOARDS: Supply and fixing of metal signages for the following: 1. Mudhalvar Padaipagam text in Tamil of size 2'0" x 15' with backlit LED placed over the base, fabricated using stainless steel sheet of minimum 16G thickness brush finish of required size and colour as required.

LOGO SIGNAGE BOARDS: Supply and fixing of acrylic signages for the following: 1. Mudhalvar Padaipagam logo of size 2' x 2' 2. CMDA logo of size 3' x 4'6" 3. Directorate of Public Libraries logo of size 6' dia with backlit LED placed over the sun board base, SIDE EDGES(4"): 5mm transparent white acrylic sheet with laser cut & 4inches manual raising all around with details. ACRYLIC SHEETS & ITS TECHNICAL PARAMETERS: Front: a. 5mm Imported (Mitsubishi/equivalent) acrylic cutting on laser cutting machine. b. Flexi bond make 25mm Sun board for the back of the logo.

CCTV, VOICE & DATA SYSTEM

Supply, Installation, Testing and commissioning of 32 channel 2 SATA NVR, with 8TB Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces.

Supply of 4MP, Internet Protocol fixed BULLET CAMERA/DOME CAMERA (INDOOR & OUTDOOR)with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. with Camera Stand.

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 4K monitor b) 2 Speakers, HDR, Dolby Vision c) HDMI -3nos d) USB -3nos e) Wifi, Ethernet f) 16GB storage

Supply and Clamping of CAT 6 unarmoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch with two uplink port, 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK)

Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK)

Supply & Installation of CAT 6 PVC Module Box I/o socket & face plate single socket Erection and arrangement chargers (Higher end)

Supply and fixing of LAN Network Switches Fully-Managed 10/100/1000 with 1G Uplink - 24 Port with fibre port switch and 24 Port Patch Panel- Unloaded erection and arrangement chargers.

Supply, runing, testing and commissioning of 2 Pair Unarmoured 0.5mm Telephone cable in suitable Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply and Fixing of Rack with Accessories -Higher end 36u Rack with fan extra for the above rack. (speaker/data/cctv)

Supply and Fixing of Rack with Accessories -Higher end 6u Rack with fan extra for the above rack. (speaker/data/cctv)

5KVA UPS Supply, erection, testing and commissioning of the following rating of UPS Systems for emergency lightings. Supply of Micro Processor Controlled 5 KVA UPS and input supply of 430 Volts ± 15%, 3 Phase, 50 Hz ± 5% and an out put of 230 Volts ±1%, 1 Phase 50 ± 0.01 Hz consisting of Rectifier, Out put Isolation Transformer, Battery Circuit Breaker, Static and Manual Bypass Switches and all others accessories required as per detailed specification .The system should be suitable for independent mode of operation.Supply of Sealed Maintenance Free Batteries to support 5 KVA for 6 hrs complete with intercell connectors, battery stand made out of Powder Coated MS Angles with adequate supports to carry the load of the batteries as per specification.Installation,Testing and Commissioning of complete 1 nos 5 KVA UPS system in Independent mode of operation with the battery bank including inter connection of UPS and battery banks with adequate size of copper cable, lugs etc. complete as required.

Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.

Supply, installation, testing, and commissioning of broadband WiFi connection with the following specifications: Networking Interface: (1) GbE RJ45 Port Power Method: PoE+, Pasive poE(48V) Max TX power: 5.0 GHz Antenna gain: 5.0 GHz Mounting: Wall or Ceiling Mounting Wireless security: WPA-PSK, WPA-Enterprises (WPA/WPA2/WPA3) VLAN: 802.1Q Concurrent Clients: 300+5G connectivity, 300mbps speed, unlimited monthly data plan, 5G compatible router with wifi boosters provided at required areas.

PA SYSTEM

Supply, Installation,Testing & commisioning of 240 watts P.A Booster Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.

Supply, run, testing and commissioning of 2Core x 1.5sq sqmm PVC insulated UnArmoured Speaker Cable in suitable 25mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply & Installation of custom built M.S Powder coated wall mounting Audio rack (42U Rack) with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310,IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.

XEROX MACHINE: Supply and erection of Canon Digital Photocopier (Xerox) Machine IR-3300 / 3235 Type of Product : Laser Multi functional Core Functions : Print, Copy, Scan & Send First Copy Time : 3.9 Sec Multiple Copies : 1 to 999 Sheets Print Speed : 45ppm The laser beams engrave the image or text that you have sent to print on the surface of the drum. When using a copier this process is done using light, the light scans the page required for printing and converts it into an image

DESKTOP PC: Supply, installation, testing and commissioning of Dell Inspiron 27" All-in-One Desktop PC of following specifications: 1. Processor: Intel Core7 150U (12MB cache, 10 cores, 12 threads, upto 5.4 GHz Turbo) 2. Operating System: Windows 11 Home Single Language, English 3. Graphics Card: NVIDIA GeForce MX570A with 2GB GDDR6 graphics memory 4. Monitor: 27", FHD 1920x1080, 60Hz, WVA, Touch, InfinityEdge, Narrow Border 5. Memory: 16GB: 2 x 8GB, DDR4, 3200 MT/s 6. Storage: 1TB M.2 PCle NVMe Solid State Drive 7. Color: Pearl White Cover + Molded Speaker Grill (for Touch LCD) 8. Microsoft Office: Microsoft Office Home and Student 2021 9. Security Software: McAfee LiveSafe 1-year (5-device) 10. Keyboard: Dell Pro Wireless Keyboard and Mouse - Dell KM5221W White 11. Wireless: Intel Wi-Fi 6E AX211, 2x2, 802.11ax, Bluetooth wireless card 12. Power: 90W AC adapter, 4.5mm barrel 130W AC adapter 4.5mm barrel

PROJECTOR: Supply and erection of BenQ TK700Sti (3000 lm / 1 Speaker / Wireless / Remote Controller) 4K UHD HDR, Excellent Colors 96% REC 709, Upto 200inches screen,Sports Mode,Android TV,16ms Low Input Lag,Google Cast,3D Keystone Smart Home Cinema Short Throw Projector (White) Aspect Ratio - 16 : 09, Brightness- 3000ANSI lumes Connector type - Wifi, Bluetooth, USB & HDMI Contrast Ratio- 1000:1, DIsplay Resoultion-3840 x2160p Life Hours- 15000Hrs, Power - 1Phase, 240Volts, 305Watts (Rate as per quotation)

PRINTER: Supply, installation, testing and commissioning of HP Smart Tank 790 WiFi All-in-One Printer Duplexer with ADF and Magic Touch Panel Inkjet Colour printer, print speed 11-20 sheets with multiple features like print, scan, copy, fax, multi-port connectivity (Hi-speed USB 2.0, Wifi, Bluetooth LE , 1 USB Host, LAN) , 2.4/5G dual band Wi-Fi, Wi-Fi Direct, mobile printing capability, etc

AIR-CONDITIONING - VARIABLE REFRIGERANT FLOW (VRF)

26 HP VRF - Top Discharge Outdoor Unit Supply, Installation, testing and commissioning of VRV/VRF air-conditioning system Cooling only comprising of Modular type high efficiency DC Scroll / Twin Rotary Multiple Compressor with DC inverter, High efficiency heat transfer Cooling Coil suitable for Environment friendly HFC R410A / R407C refrigerant, Air cooled propeller type condenser fan with DC motor drive, interconnecting piping, insulation etc., Micro-processor control panel suitable for automatic operation, High speed calculation inverter control, active oil control mechanism incorporating all safety functions as per technical specifications & other points listed below. Unit shall have a minimum of 2 compressors. And each compressor shall run independently even though there is a failure in the other compressor. The unit mounted starter panel shall be complete with IP-55 protection consisting of power disconnecting switches with fuses, soft starters, for compressor motors, under/over voltage trip, single phase preventers, communication card which can accept 4-20 mA or 2-10 Vdc analog signal. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

24 HP VRF - Top Discharge Outdoor Unit Supply, Installation, testing and commissioning of VRV/VRF air-conditioning system Cooling only comprising of Modular type high efficiency DC Scroll / Twin Rotary Multiple Compressor with DC inverter, High efficiency heat transfer Cooling Coil suitable for Environment friendly HFC R410A / R407C refrigerant, Air cooled propeller type condenser fan with DC motor drive, interconnecting piping, insulation etc., Micro-processor control panel suitable for automatic operation, High speed calculation inverter control, active oil control mechanism incorporating all safety functions as per technical specifications & other points listed below. Unit shall have a minimum of 2 compressors. And each compressor shall run independently even though there is a failure in the other compressor. The unit mounted starter panel shall be complete with IP-55 protection consisting of power disconnecting switches with fuses, soft starters, for compressor motors, under/over voltage trip, single phase preventers, communication card which can accept 4-20 mA or 2-10 Vdc analog signal. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .

2 TR Cassette Type AC Unit Supply, Installation, Testing and commissioning of Indoor Cassette units. All the units should be supplied with Cordless remote control and Refrigerant Y joints with fixing arrangements, etc., (Capacity : 2TR)

3 TR Cassette Type AC Unit Supply, Installation, Testing and commissioning of Indoor Cassette units. All the units should be supplied with Cordless remote control and Refrigerant Y joints with fixing arrangements, etc., (Capacity : 3TR)

Supply and Installation of Refnut joints with all accessories

Supply and Installation of 20G Hard drawn copper pipe with nitrile rubber insulation and necessary supports

Supply and Installation of Communication cable between indoor and outdoor units with PVC Conduit and fittings

Supply and Installation of PVC condensate Drain pipe with insulation and fittings

Supply, Installation, Pressure Testing and gas charging R410A Refridgerant gas

PASSENGER LIFT WORKS

Supplying, erecting, testing and commissioning of machine room less passenger Elevator having 13 passengers capacity, rated speed 1.5 mtr. / sec., for GF to 2 th floor, 400 volt 3 phase, 50 Hz, AC variable voltage variable frequency derive with speed encoding, simplex full collective with / with out attendant, microprocessor based controller located top floor, variable frequency regenerative drive, flat polyurethane coated belts for traction media, stainless steel panels with hairline finish for car and door, gearless with permanent magnet motor located in the shaft top, all openings are located at the front of the hoist way, with centre opening Automatic with ACVVVF door operator with electronic door protective system, stainless steel hairline finish sliding doors, painted frame with down light false ceiling, Stainless Steel mirror finish hand rails, granite flooring of client choice, sixteen segment digital LED display position indicator in all floors, digital car position indicator, over load warning indicator, battery operated alarm bell and emergency light, fireman's switch at main lobby, with automatic rescue device, intercom between lift car and lobby and controller, voice synthesizer, 60 minutes fire rated car door. Car Entrance :- Clear opening

Lift Shaft Wiring : Wiring, Connecting, Testing & Commissioning for lift well light point and 6Amps power socket outlet for all 4 floors with 2 x 2.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V grade along with 1 x 2.5 sqmm FRLS PVC insulated standed copper conductor cable as earth wire in suitable PVC rigid pipe on wall and ceiling with PVC accessories , 2 Nos. of 5A single way module switch (for controlling light point and socket Outlet ) for each floor of the lift well , with bulkhead lamp 1 No. 5A 5 Pin shuttered socket outlet with flush type switch for each floor of the lift well and making necessary connections complete etc.

LIFT Inspection Drawing Approval Charges Charges

DIESEL GENERATOR WORKS

Supply, Erection, Testing and Commissioning of 160KVA Diesel Generator set with AMF control panel, comprising of Water cooled CPCB developing @ 1500 RPM and Alternator, complete with type approved canopy and all accessories. with the following technical specification: *Industries most reliable engines, proven over decades. *Low emission, High efficiency. *Compact, robust and rugged design. *Engine Dry type air cleaner *Exhaust Silencer (Residential type) Hospital Grade. *Expansion bellow *Lube oil cooler Lube oil filter (“Spin-on” type) *Fuel Filter (“Spin-on” type) *In line mono block fuel injection pump with Electronic Governor and fuel feed pump. *Dynamically balanced Flywheel with starter ring *Electronic Governor :Governing class G2(as per ISO 8528 part V) *SAE 1 flywheel housing and flywheel suitable for SAE 14 disc coupling for close coupling of single bearing alternator.

*Exhaust gas turbocharger 24 Volt electric starter motor 24 Volt, 18 amps. Battery charging alternator *Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button. ALTERNATOR 200KVA, Three phase 415V, 0.8 pf 4 wires 50 hz at 1500 RPM brushless alternator. The voltage regulation will be 2 phase sensing +/¬ 1 %. The alternators shall be of Class H insulation, enclosure IP 23 and are designed built and tested to IS 4722 or any other equivalent Indian or international standards. Control Panel: 200 KVA DG Set Std Control Panel Consisting of EMS KG934 unit consisting Volt, Amps, RPM, Hz, LLOP, HWT, Low fuel level, over Speed alarm, Over Load alarm, Load imbalance safety alarm, etc. Fuel Tank: 300 Letters Capacity inbuilt Fuel Consumption: 100% = 37.6 Litres/hr.75% = 27.6Litres / hr.50% = 19.8Litrs/hr. Battery: 24V DC, 130AH Supply of AMF Control Panel Suitable for 160 KVA DG set for EB Services with byepass arrangement. (Make: Kirlosker, Koel or equvalent) including Suitable Foundation and Transportation charges.

FIRE PUMB

FIRE PUMP EQUIPMENT

Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 450 LPM at 20 metres head to develop 2.0 kg/sq.cm at the heightest andfarthest hydrant point to make 10m water jet at the time of fire fighting emergency cicumstances, coupled with 3.75KW/ 5HP rated three phase 415 volts, 50 Hz, 2880 rpm electrical motor, the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia, including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 538 or Equivalent))

Control Panel for Fire pumps.

1100 V GRADE POWER / CONTROL CABLES

Supply and laying of following sizes of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc.. The rate inclusive of all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT.

4 core x 25 sqmm Al. Ar. Cable

Supply of all materials and termination of the following 3.5C x 25 sq.mm AYWY/A2XY/AYFY aluminium LT UG cables using double compression type cadmium plated brass cable glands suitable crimped type cable lugs(copper), cable identification tags and including gland earthing using Cu conductor os adequate size.

Supply,installation,testing and commissioning of following 63 Amps 30 MA with weather proof enclosure

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead tank at terrace level near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.

100 mm nominal dia

Supplying, installing and commissioning C.I. flanged "Y" type Strainer with SS screen, suitable flanges, nuts, bolts, gaskets etc. complete.Make:Reputed

100 mm nominal dia

Supplying, Installing, testing and commissioning C.I. butterfly valves as per BS 5155 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.Make:NORMEX/INTERVALAVE

100 mm nominal dia

Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT.

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: H-GURU / ISI MAKE / EQUIVALENT.

DOWN COMER SYSTEM

Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.

100mm nominal dia

80mm nominal dia

25mm nominal dia

Supplying, erecting and commissioning of internal Hydrants

Supply and fixing of Fire fighting application oblique type stainless steel Hydrant Valve of size 63mm dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, and fixing in position of Fire Fighting Application Hose of 63mm dia of 15 metres length binded by copper wire with 63mm dia stainless steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the Departmental Officers. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR/ LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, and fixing in position of Fire Fighting Application 63mm dia stainless steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply of Fire Fighting Application MS Hose Box to keep two number of hoses and 1 No. of branch pipe with nozzle having proper glass window type double door with universe open key, painted inside white and outside Post Office Red. Near every hydrant point including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.

Supply, erection, testing and commissioning of Fire Fighting 2 Way Fire Brigade Inlet with necessary gun metal 63mm dia non-return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. (Make: KIARTAR / OMEX / EQUIVALENT)

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT.

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type.Make:ZOLOTO

25mm dia.

Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.

100mm dia

FIRE ALARM SYSTEM

Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

Response indicator for all detectors located above false ceiling.

2 core 1.5 sq.mm armoured multi strand aluminium cable

Fault Isolator Module capable of monitoring shorted loop circuit and automatically restore communications

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. (Make: Ravel / Equivalent)

Control Module for Hooter: Supply, Installation, testing and commissioning of Addressable Control Modules for activating hooters with all the mounting accessories complete as required. One CM shall provide one activation signals.

Control Module for Access Controllers System Integration: Supply, Installation, testing and commissioning of Addressable Control Modules for overriding access door command with all the mounting accessories complete as required.

Control Module for PA Integration: Supply, Installation, testing and commissioning of Addressable Control Modules for overriding PA system with all the mounting accessories complete as required. One CM shall provide one activation signals.

Monitor Module: Supply, Installation, testing and commissioning of Addressable Monitor Modules for Interfacing PFC/Dry Inputs of Fire Pump Signals, Sprinkler Line Flow Switch Status, Base builder fire alarm panel integration with all the mounting accessories complete as required.

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)

Addressable Fire Alarm Control Panel consists of display board which will have 160 Character Display with Touch key pad, Mother board 32 Bit Processor, In-built RS-485 Networking Circuit for peer to peer networking, In-built USB 2.0 Port, Loop Card having 254 devices of both detectors and modules in a single line circuit, SLC supports both Class A and Class B wiring Approval: UL Listed

3 Loop Panel

Addressable Active Repeater Panel consists of display board having 160 Character Display with Touch key pad, Mother board which will have 64 Bit Processor, Inbuilt RS-485 Networking Circuit for peer to peer networking.

FIRE EXTINGUISHERS

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground.The size of the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near Manual call points.

Floor identification Signage at each stair enclosure on every floor, in accordance that the numerls shall be bold type and at least 7.5cm high. Size shall be 15cm x 60cm.

Fire Exit signage at each stair on every floor, indicating the direction of fire exit,lettering size shall be 7.5 cm with contrasting color from back ground. Size shall be 15cm x 60cm

Fire extinguisher signage as per the type of extinguishers

C.V.T ENTERPRISES (BID ID -1283423)

M/s.KUMAR BUILDERS (BID ID -1283539)