REPAIR TO SUNKEN FLOOR DADO SOIL WASTE VENT AND WATER SUPPLY PIPES SANITARY FITTINGS, PLUMBING INCLUDING CLEANING OF OVER HEAD TANK IN C2 B AREA AND COMPOUND WALL FENCING CONERTINA COIL AND MISC BR ITEM C2A AND C2B AREA UNDER GE EAST MATHURA

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compete all as specified and as directed.

M&L for 25 mm cement concret 1:2:4 type- B0 (using 12.5 mm graded stone aggregate) as levelling course as in floor etc finishing cement concrete surface even and fair without using extra cement compete all as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:6 complete all as specified and as directed.

M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectagular) polished,area of each tiles not exceeding 0.36 sqm, as in vertical surface such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for as in sunken floor etc. complete all as specified and as directed.

M&L for cement concrete type F2 1:7:12 (using 40 mm graded stone aggregate) as filling of sunken floor etc. complete all as specified and as directed.

Taking down cement plaster on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work/concrete surface in cement motar 1:4 by mixing liquid water proofing compound as per manufacturers instructions and surface finished even and fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces brick wall or concrete surface in cement mortar 1:6 surface finished even & fair without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface as in ceiling in mortar 1:3 surface finished even & fair complete all as specified and directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of alkali resistant primer including 1mm thick wall care putty complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of weather proof acrylic exterior paint dark shade over and including a coat of primer (100% Acrylic) including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for preparation of new plastered surface of ceilling and applying three coats of white wash complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in coping, roof kerbs, padding etc as directed mixed with liquid water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note :-WPC shall be measured and paid seprately.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering complete all as specified and as directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved by GE

M&L for repairing the edges/corner of Chajja/roof projection and similar work by removing plaster width/girth not exceeding 150 mm and making good with 10 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls/ceilings and applying one coat of weather proof acrylic exterior paint including required scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) bends any radius with oval access door complete as specified and as directed.

S&F in repair 75mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) branch piece double (double Y) equal or un equal provided with access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) branch piece double (double Y) equal or un equal provided with access door complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) branch piece double Tee any radius provided with access door complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) branch piece double (double T) equal or unequal provided with access door complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps of size 25x3 mm thick at 2mtr spacing complete all as specified and as directed.

S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable MS clamps of size 25x3mm at two mtr spacing complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections including disconnection of fitting complete all as specified and as directed.

Taking up or down 25mm dia steel tubing and connections, complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Supplying & fixing steel tubing ,galvanised, medium grade 25 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F in repair 15-20mm bore GI reducer complete all as specified and directed.

S&F in repair 25 mm bore GI Tee complete all as specified and directed.

S&F in repair 25 mm bore GI Union complete all as specified and directed.

S&F in repair 25 mm bore GI Elbow complete all as specified and directed.

S&F in repair 25 mm bore GI socket complete all as specified and directed.

S&F in repair 25 mm bore 125 mm long Nipple complete all as specified and directed.

S&F in repair 25 mmbore 100 mm long Nipple complete all as specified and directed.

S&F in repair 15 mm bore GI Union ccomplete all as specified and directed.

S&F in repair 20 mm bore GI Union complete all as specified and directed.

S&F in repair 20 mm bore GI Elbow complete all as specified and directed.

S&F in repair 20 mm bore GI Nipple 6 inch long complete all as specified and directed.

S&F in repair 20 mm bore GI Nipple 4 inch long complete all as specified and directed.

S&F in repair 20 mm bore GI socket complete all as specified and directed.

S&F in repair 15 mm bore GI Tee complete all as specified and directed.

S&F in repair 15 mm bore GI Union complete all as specified and directed.

S&F in repair 15 mm bore GI Elbow complete all as specified and directed.

S&F in repair 15 mm bore GI socket complete all as specified and directed.

S&F in repair 15 mm bore 125 mm long Nipple complete all as specified and directed.

S&F in repair 15 mmbore 100 mm long Nipple complete all as specified and directed.

S&F in repair colour european type combination pattern EWC casket type with mounted flushing cistern , PVC connection,seat cover and jointed to sewage pipe complete all as specified and directed.

S&F in repair Health faucet of superior quality ABS body with 8 mm dia 1.2 m long flexible tube and wall hook complete all as specified and as directed.

S&F in repair sink mixer 15mm bore with EXTENDED swinging spout (wall mounted model )with connecting legs and wall flanges complete all as specified and as directed.

S&F in repair Bib cock 15mm bore core with wall flange complete all as specified and as directed.

S&F in repair Angular cock 15mm bore dia with wall flange complete all as specified and as directed.

S&F in repair Bip tap with long body 15mm bore standard of CP any colour screwed for iron pipe & fixed complete all as specified and as directed.

S&F in repairs wall mixer 15mm bore with connector for hand shower arrangement with connecting legs ,wall flanges and wall bracket for hand shower complete all as specified and as directed.

S&F in repair Basin Mixer 15mm bore dia with 450 mm long Braided connected pipe complete all as specified and as directed.

S&F in repair 2 way bib cock of superior quality with wall flange 15 mm dia including fixing to pipe complete all as specified and as directed.

S&F in repairs concealed stop cock reduced body with adjustable Wall Flange for pipe of 15mm bore complete all as specified and as directed.

S&F in repairs Plastic hydraulic one piece seat cover WHITE closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repairs Syphone kit for one piece seat, including accessories complete all as specified and as directed.

S&F in repair overhead shower (with Arm) 200 mm dia round shape single flow (body and face plate stainless steel with chrome finish) with rubit cleaning system complete all as specified and as directed.

S&F in repair corner Sheet glass shelf assembly of size 200mm consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repair stainless steel Towel Rack 600 mm long with lower Hangers complete all as specified and as directed.

S&F in repair stainless steel Towel Rail 600 mm long complete all as specified and directed.

S&F Waste coupling 32mm bore dia of PTMT (half or full threaded) suitable for urinals (min. weight 32mm-45gms) complete all as specified and directed.

S&F Grating doom 100 mm dia of CP (min. weight 25 gms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F in repair stainless steel Towel ring 6cm x 15cm x 6cm complete all as specified and directed.

S&F in repair stainless steel SOAP DISH holder complete all as specified and directed.

S&F in repairs TUMBLER holder complete all as specified and directed.

S&F in repair stainless steel toilet Roll holder of size 8cmx 13cm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for 20mm bore dia of pipe and fixed (minimum weight 210 gms each) complete as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) 1000 liters capacity hoisted and fixed in position complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tank (Triple layers white in colour) (Cylindrical vertical with closed top) 500 liters capacity hoisted and fixed in position complete all as specified and as directed.

M&L for Cleaning of HDPE tank of capacity exc 500 liter but n exe 1000 litres by Flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 metre and depositing where directed complete all as specified and as directed.

S&F in repairs sinks made of stainless steel sheet 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and as directed.

M&L for 15mm thick rendering on other than fair faces of brick/concrte surface in cement mortar 1:4 finished the surface even and fair without using extra cement complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (Below or above ground level) including removal of debris outside of MOD land complete all as specified and as directed.

M&L for 100 mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base, Sub floor, foors and paving etc complete all as specified and as directed.

M&L for sand cushioning 25 mm thick over PCC sub base all as specified and as directed.

M&L for Chequred Cement concrete coloured tiles with grey cement and pigments 30cm x 30cm x 25mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, laid over and including 20 mm thick screed bed in CM 1:6 all as specified and as directed.

M&L non skid coloured cermic tiles 10 mm thick exc 0.06 Sqm but n. exc. 0.11 Sqm, set and jointed in neat cement slurry & pointed with coloured cement to match in floor laid over and including 15 mm thick screed bed in CM 1:4. all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block(with grey cement and pigment) any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.

Material & Labour for road side kerb with factory made Precast cement concrete block of mix 1:3:6 type C-1 using 20 mm graded stone aggregate, n exc 100 mm in width & set in CM 1:4 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 omplete all as specified and as directed.

Dismantling fencing wire mesh any type complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in cement, Brick work masonry etc and making good disturbed area complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in natural ground and making good disturbed area complete all as specified and as directed.

M&L for cement concrete type C2 1:3:6 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

S&F Mild steel work as in hand rails , half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc. incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins complete as specified and as directed Note: (Each line wire to be measured)

Restraining and resecuring including making good staples etc of Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm barbs at 75mm spacing fixed to any type of straining bolts all as specified and as directed.

Supply and fix galvanised punched type concertina coil of loop dia 450 mm (dia of coil when upstretched) fixed to existing angle post strut and tying at three places ie two bottom & one at top with 3.15 mm dia galvanised mild steel wire complete all as specified and directed by Engineer in Charge.

Fixing only chain link fencing of any description fixed to steel post with mild steel flat & nut bolt etc. complete all as specified and as directed.

Supply only MS galvanised chain link fencing having dia of wire 3.15 mm and mesh size 50mm x 50 mm complete as specified and as directed. Note: A BOO shall be detailed by GE to ascertain the actual weight of chain links fencing brought by contrctor at site for incorporation in work on intimation of Engr-in-Charge.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long & dia of shank 11 to 15 mm long all as specified and directed..

M&L Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W or (Gde E-250) quality A or Fe 290 (Gde E-165) complete all as specified and as directed.

Dismantling Fibre glass reinforced plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap with coach screw & washer in roof, wall etc complete all as specified and as directed.

Demolition of Brick work or stone/boulder masonary, buitd in cement mortor or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brick work with old size Fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping complete all as specified and directed.

M&L for rendering 10 mm thick on fair face of brick wall or concrete surface in cement mortar 1:4 finished even & fair complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment of wall & preparation of old plastered surface of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of oil bound distember over a coat of primer complete all as specified and as directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) of any type and size, set in cement mortar, complete all as specified and as directed.

M&L 300mm bore reinforced concrete pipes, class NP2, laid and jointed with collars complete all as specified and directed.

M&L cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate)bed for cement concrete pipes 300mm dia bore including packing under and completely surrounding pipes after they are laid and tested in complete all as specified and directed.

M&L for cement concret 1:3:6 type C 1 (using 20mm graded aggregate) as in copping/surface channel incl weathering , slightly rounded or champer angle and throughting complete all as specified and directed.

M&L for forming fair finished drain or channel 50cm inner girth in cement motor, using extra cement including form, moulds, mitred/stopped ends etc. complete all as specified and directed.

M/S A.K. ENGINEERS

M/S United Builders

B R ENTERPRISES

B S ENTERPRISES

Ms Kamal Kant Agarwal

mh enterprises

M/s Hoti Lal Contractor