SPECIAL REPAIR TO BUILDING NO P-117 OF HAPPY VALLEY, 1 STC JABALPUR AND BUILDING NO T-79 AT SURINDER ENCLAVE UNDER GE (WEST) JABALPUR

Amount

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

S&F 1st class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, with all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.

M&L for PCC (1:5:10) Type E-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.

M&L for Plain Cement Concrete in ( 1:1.5:3)Type A-0 using 12.5 mm graded crushed stone aggregate as in roof kerbs/covet fillet complete all as specified and as directed.

M&L for PCC (1:3:6) Type C-1 using 20mm graded crushed stone aggregate as in cills, copings, bed plate, plinth courses etc , slightly rounded or chamfered angles and throating complete all as specified and directed.

M & L for precast reinforced cement concrete Type B-1 using 20mm graded crushed stone aggregate in window or door cills, lintels, copings, corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed. ( Note : Reinforcement will be measured and paid for separately)

M&L for 25mm thick PCC (1:2:4) Type B-0 using 12.50 mm graded crushed stone aggregate as in floor, surface finished even & fair without using extra cement complete all as specified and directed.

M&L for RCC M-20 (Nominal mix) using 20mm graded crushed stone aggregates as in chajjas, parapet facia etc complete all as specified and directed.

M&L for 150 mm thick cement concrete (1:3:6) Type C-2, using 40mm graded crushed stone aggregate as in sub-base complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4) Type B-0 using 12.50 mm graded crushed stone aggregate as in floor, surface finished even & fair without using extra cement complete all as specified and directed.

M&L for formwork to chajjas, troughs and similar items including edges for fair finished surfaces of concrete complete all as specified & directed.

M&L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 Cm long complete all as specified & directed.

M&L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 Cm but not exceeding 15 Cm long complete all as specified & directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

M&L for brick work with sub class 'B' modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) including flush pointing external faces with the same mortar complete all as specified & directed.

Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High Pressure Steam Cured) non-asbestos fibre cement reinforced multipurpose board, pre-primed , self embossed textured designer board, water resistant, termite resistant and fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with and including provision of light fixture complete all as specified and directed. Make :- ARMSTRONG AND EVEREST or other equivalent Make as approved by GE.

M&L for repairing of cracks n.exc 10mm in width including preparation of cracks by removing loose portion of cracks with grinding, dusting with blowers and washing down, applying crack filling material (Dr Fixit, Crack -X paste) in cracks and making surface good complete all as specified and directed.

M&L for Hardcore of guage n exc 63mm of broken stone aggregate, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Roughening surfaces of old concrete floor/terrace by picking including taking down existing deteriorated / decayed tarfelt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces mixed with liquid water proofing compound @ 2% by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and directed. ( Note:- WPC will be measured and paid for separately)

M&L for applying two coats of bitumen blown any grade , applied hot , to concrete surfaces, at the rate of 1.5Kg per sqm per coat. complete all as specified and as directed

M&L for polythene film, black, 50 micron thick, laid in floors complete all as specified & directed. Note:-Net area of polythene film will be considered for payment purpose.

S&F powder coated ( minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. (Notes : (i) Unit rate quoted against this item includes for provision of PVC protected sheeting and its removal after fixing the frame work. (ii) Hinges and lugs shall be measured and paid for separately. (iii) Weight of joining cleat shall be added to main frame.)

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling timber scantling, unframed, 40 Sqcm and over in section in any position complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section, in unframed work in any position complete all as specified and directed.

M&L for 19mm thick prelaminated particle board, interior grade, both sides with decorative choice laminations as in timber frame work, rebated or flat edged; fixed with & including suitable size clamps, glue & screws etc as required at site complete all as specified & directed.

S&F powder coated ( minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and as directed.

M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed. Note:- Butt hinge will be measured and paid for separately .

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on one face and other side covered with decorative face veneer with liping/frame to match complete all as specified.( Note : The unit rate quoted by the Bidder is deemed to include for provision of suitable blocks for taking mortice locks, latches , or other fittings)

S&F, 1mm thick wood grain printed PVC sheet fixed or laid on to flush doors by using rubber used adhesive, supplying & fixing at site as per specification complete all as specified and directed.

S&F steel ventilator factory made with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

Supply & fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) n.exc. 36mm complete all as specified and directed.

S&F , in repair, safty type, aluminium anodised hasp and staple with MS pin hinges including bolt to hinge plate and fixed with screws of 100 mm size complete all as specified and directed.

Supply and Fix aluminium handles 75mm size, cast type, anodised complete all as specified & directed.

Supply and Fix aluminium handles 100mm size, cast type, anodised complete all as specified & directed.

Supply and Fix aluminium handles 150mm size, cast type, anodised complete all as specified & directed.

Supply and fix aluminium handles 125mm size, cast type, anodised complete all as specified & directed.

Supply and fix MS bow handles 150mm size, oval type, stove enamelled black complete all as specified & directed.

Supplying & fixing 100mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type B-21 complete all as specified & directed.

Supply and fix 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and fix 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and fix 200mm long mild steel barrel tower bolts, stove enamelled black with bright bolt complete all as specified & directed.

Dismantling of AC (corrugated or semi corrugated etc.) sheets including ridges in roof coverings complete all as specified & directed.

Supply & fix 300mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Supply & fix 250mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.

S&F mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of 300 mm size complete all as specified and directed.

S&F mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of 250 mm size complete all as specified and directed.

Supplying & fixing 300mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed.

S&F fancy type drapery rods with two way wooden/brass brackets, 25mm bore, cut to length as required, of colour as approved by GE complete all as specified and directed.

M&L for 10mm thick rendering over roof surfaces in CM 1:3 with using liquid water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified & directed. Note: WPC shall be measured and paid for separately as "Supply Only" under respective item of BOQ.

M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.

M&L for unrolled over the bitumen coated surface, 3mm thick spun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum side over lap of 100mm and end over lap of 150 mm shall be sealed by flame as per manufacturer's instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.

M&L for applying a coat of bituminous aluminium paint @ 100gm/ sqm over non-accessible roof and blinding material such as dry sand @ 0.75Kg/ Sqm over & including a coat of hot air blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm over polymeric membrane complete all as specified & directed. Note- Bituminous aluminium paint shall be of same manufacturer as specified for polymeric water proofing membrane.

M&L for mild steel TMT bars 8 mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F precoated steel window rolled formed GI Section ECO 4000 (Openable double rebate window) single rebate openable/fixed windows made of galvanized steel powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 48 x 50 mm, centre mullion section 48 x 50 mm, shutter section 47 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length mitre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. SS( stainless steel) heavy duty pivot hinges per shutter and window fitted with 5mm thick plain float glass with EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing frames in concrete/masonry wall by means of self expanding screws, including 10mm Square bars welded to and including 6x12mm flat at a distance 150mm c/c (pitch) etc. complete as per the direction of Engineer in Charge. Make :- NCL Alteck and seccolour ltd or equivalent as approved by GE Notes: (i) Wiremesh/ glass panes shall be measured and paid for separately under respective items of BOQ.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed.

S& F for Solid PVC moulded double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening but single prelam PVC sheet used instead of Plain colour PVC sheet complete all as specified and as directed

S&F Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site complete all as specified and as directed

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

Cutting holes in brick walls, exc. half brick but not exc. one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L for mild steel work conforming to Fe-290 Gde -165 as in hand rail, holdfast, half round or other steel section or core for wooden hand rail strait portion, drilled and countersunk for balusters running bars for doors, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Supply and fix rolled mild steel sections conforming to Fe- 410-W (Gde E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates etc complete all as specified & directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts). No claim whatso ever shall be entertained by Govt on this account.

S&F framed work as in iron enclosure, doors or gate of angle iron or other section with gussets plate, rails, braces etc drilled for fixing of steel seating other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account.

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150)corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed. Make: Tata Blue Scope Steel Ltd or M/S Cril Colour Roof India Ltd. or Everest Industries Ltd or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

S&F of pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150) plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) fixed with self tapping screws complete all as specified & directed. Make: Tata Blue Scope Steel Ltd or M/S Cril Colour Roof India Ltd. or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

M&L for mild steel work conforming to Fe-290 Gde -165 as in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350x250x7mm or 450x350x7mm thick as approved by GE on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M&L for scratch free dark shade vitrified floor tiles, minimum 10mm thick (square/ rectangular) area of each tile not exc 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for machine cut cudappah stone slab as in cooking platform/ shelf , 20-25mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L for machine cut kota stone slab as in flooring, 18-20mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for rubber moulded factory made coloured cement concrete chequered tiles with grey cement and pigments 250mm x 250mm x22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed. Make:- Mehtab Tiles, Indore (MP) or Nitco, Mumbai or Mayur Tiles & Interlocking pavers, Lucknow or Star Tiles & Industries, Ramadevi, Kanpur as approved by GE.

M&L for machine cut kota stone slab as in skirting/ vertical surface, 15-18mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for machine cut Marble slab as in riser/skirting/ vertical surface, 20 mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with white cement including rubbing and mirror polishing complete all as specified & directed.

M&L for 50mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in plinth protection finished even and smooth without using extra cement forming joints to full depth at every 3M intervals and at every change of direction and filing with bitumen sand mixture 1:3 by weight complete all as specified and directed.

M & L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 on internal surfaces of wall, finished even and smooth without using extra cement complete all as specified & directed.

M&L for 5mm thick rendering in CM 1:3 as on ceiling, soffit of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof, mixed with liquid water proofing compound as per Manufacturer's' instructions, surface finished even and smooth without using extra cement complete all as specified & directed. ( Note : Liquid water proofing compound will be measured and paid for separately against relevant item of BoQ)

M&L for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of cement base primer complete all as specified & directed.

M&L for prepration of old decorated plastered or unplastered surfaces of walls of any description by complete removal of existing treatment and preparation of surfaces for further treatment complete all as specified and directed.

M&L for applying wall care putty @ 1.0Kg/ Sqm and application of two coats of distemper, oil emulsion, white or tinted, on smooth and even surfaces of wall complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper, oil emulsion, white or tinted, with and including 2mm thick wall care putty and one coat of appropriate primer complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description n exc 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old or new surfaces of wood or wood based materials of any description and girth, not otherwise described, and treating with creosote oil complete all as specified & directed.

Roughening surface of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc and applying cement slurry @ 2 kg/Sqm complete all as specified and as directed.

M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete over and including screed bed 15 mm thick in CM 1 : 6 complete all as specified and directed.

Supply & fix kitchen sink with drainage board made of stainless steel 1.0mm thick with plug, washers with and including 32 mm dia PVC rigid waste pipes and C.P coupling including fixing cantilever brackets of suitable shape & size as required at site and connecting unions to pipe, overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160mm and necessary cutting to slab complete all as specified & directed. Make:- Prayag Polymer Pvt Ltd or Jain Brothers Sanitation Pvt Ltd or Blue Star Silver Shine or Nirali or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

M&L for scratch free light shade vitrified floor tiles, minimum 10mm thick (square/ rectangular) area of each tile exceeding 0.42 sqm but not exc 1.00 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

S & F Stainless steel kitchen plate rack, 0.56mm thick of standard pattern, 787x914mm size including fixing to wall with 4 Nos 50mm long screws & PVC rawl plugs complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory in colour, size (400 x 500mm) complete all as specified and directed. (Make : Prayag, Cat No. 554 of Make or equivalent Make as approved by GE)

Dismantling of water tank of any description of capacity exc. 500 litres but not exc. 1000 litres, removing to store or from the site complete all as specified and as directed.

Supply and fix 1000 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. Make:- Sintex or Tuff or JS Poly Plast or Dhara as approved by GE.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed

M & L for preparation of new previously untreated surfaces of steel of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over a coat of primer complete all as specified & directed.

M&L for prepration of old decorated plastered or unplastered surfaces of walls and applying one coat of anti-fungal Apex paint complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 25mm bore of pipe complete all as specified and as directed.

Supply & fix 40mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor as sunken spout complete all as specified & directed.

Supply & fix 15mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Supply & fix 20mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Supply & fix 25 mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.

Supply & fix in repairs, 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Make:- Leader or Bombay Metal & Alloy Co. or Zoloto or NMC or Vardhman or BIR Jalandhar as approved by GE.

Supply & fix in repairs, 25mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Make:- Leader or Bombay Metal & Alloy Co. or Zoloto or NMC or Vardhman or BIR Jalandhar as approved by GE.

S&F, in repair, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long Complete all as specified and directed.

S&F, in repair, chromium plated glass shelf of size 550mm long complete all as specified and as directed. ( Make : Jaquar, Cat No AQN-7771 or equivalent Make as approved by GE)

Supply and fix 750 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. Make:- Sintex or Tuff or JS Poly Plast or Dhara as approved by GE.

S&F in repair chromium plated corner glass shelf with and including glass complete all as specified & directed(Make-Prayag, Model No BEA-49 or equivalent Make as approved by GE).

S & F waste coupling chromium plated, size 32 mm with long thread complete all as specified and as directed..

S&F Plastic water closet seat, white/cream, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device for pedestal pattern WC complete all as specified and as directed.

S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly-nuts, screwed for iron pipes, complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix in repairs, 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix in repairs, 15mm dia stop valves , cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed. Make:- Jaquar , Model No CQT 23083 or Equivalent model of Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd as approved by GE

Supply & Fix, in repair, two way bib cock suitable for 15 mm bore tube, fancy type, complete as specified and as directed. ( Make : Jaquar , code ARI-39041 or equivalent Make as approved by GE)

S&F in repairs, 15mm dia bib cock,cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, long body, screwed down for iron pipe or brass ferrule complete all as specified & directed. Make:- Marc or Zoloto or Plumber or Gem or Seiko or Prayag polymer Pvt Ltd or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & Fix in repair Bib taps suitable for 15 mm bore tube fancy type complete all as specified & as directed.( Make : Jaquar, Continental code CON-037 or equivalent Make as approved by GE),

Supply & Fix, in repair, for 15 mm bore CP angle Stop valves, complete all as specified and directed. ( Make : Jaquar , Continental code CON -053 KN or equivalent make as approved by GE)

Supply and fix in repair 20 mm dia towel rail , stainless steel, 600mm long, tubular towel rail complete all as specified & directed. Make:- Jaquar ( Code AKP 35711PS)/ PRAYAG SYMET/ COMMANDER or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

Supply & Fix in repair Towel Ring complete all as specified and directed.( Make : Jaquar, Cat part No. ACN-1121N or equivalent Make as approved by GE)

Supply & fix in repair Towel Rack 600mm long with lower hangers complete all as specified and directed.( Make : Jaquar, Cat Part No. AHS 1581 or equivalent Make as approved by GE)

S&F in repairs, brass chromium plated wall mixer with three joints suitable for 15mm bore pipe complete all as specified & directed. Make:- Prayag Cat No. BEA-49 or equivalent model of make Marc or Gem or Plumber or Seiko or Zoloto as approved by GE.

S&F in repairs, brass chromium plated wash hand basin mixer of mixing hot and cold water, fancy type, suitable for 15mm bore pipe complete all as specified & directed. Make:- Prayag or equivalent model of make Marc or Gem or Plumber or Seiko or Zoloto as approved by GE.

Supply & Fix, in repair, central hole basin mixer , 15 mm bore, fancy type complete all as specified & directed. ( Make : Jaquar, Continental code- CON-167 KNB or equivalent make as approved by GE)

Supply & Fix, in repair, Sink Mixer complete all as specified and as directed. ( Make : Jaquar, code CQT-23309 or equivalent Make as approved by GE)

S&F in repair, brass CP shower rose 125mm size, fancy type, suitable for 15mm bore GI pipe with swivel joint as approved by GE complete all as specified and directed.

Supply & Fix, in repair, over head Shower, square in shape (150X150mm) , single flow, chromium plated with Gray face plate complete as specified and as directed. ( Make : Jaquar, code - OHS 35495 or equivalent Make as approved by GE)

Supply & Fix, in repair, shower Arm complete all as specified and as directed. ( Make : Jaquar, code SHA-479L300 or equivalent Make as approved by GE)

Supply & Fix, in repair, hand Shower complete all as specified and as directed. ( Make : Jaquar, code HSH-49537 or equivalent Make as approved by GE)

Supply & Fix, in repair, Flush Valve complete all as specified and as directed. (Make: Jaquar, code FLV-1015 or equivalent make as approved by GE)

Supply & fix, in repair, Double coat Hook complete all as specified and as directed.( Make : Jaquar, code AKP-35761P or equivalent Make as approved by GE)

S&F stainless steel kitchen plain basket (sleek make) of SS-304 grade, anti-corrosive, complete all as specified and as directed.

S&F stainless steel kitchen thali basket (sleek make) of SS-304 grade, anti-corrosive, complete all as specified and as directed.

S&F stainless steel kitchen cup and saucer basket (sleek make) of SS-304 grade, anti-corrosive, complete all as specified and as directed.

S&F stainless steel kitchen cutlery basket (sleek make) of SS-304 grade, anti-corrosive, complete all as specified and as directed.

S&F, in repair, stainless steel telescopic wall -bearing self closing channels, exc 300mm but n exc 500 mm, complete all as specified and as directed.

S&F, in repair, stainless steel hinges 75mm, for cupboards with sensor (as per 3D designs) inclduding all fittings complete all as specified and as directed.

S&F, in repair, 150mm handles with sensor (as per 3D designs) inclduding all fittings complete all as specified and as directed.

S&F, in repair, Europa cupboard locks complete all as specified and directed.

Supply & Fix, in repair, 18 mm thick PVC sheet, one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet (with shelves and partitions) including necessary fitting & fixture as per Manuacturer's instructions complete all as specified & directed.

S&F 19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face and other side commercial type with and including 6mm thick 1st class HardWood lipping over all edges, fixed with GI nails etc complete all as specified and as directed.

S&F PVC bath cabinet with mirror of size 400x500mm of approved colour complete all as specified & directed. Make:- Prayag Cat No. 551 or equivalent model of make-COMMANDER as approved by GE.

S&F cast iron floor trap, with grating 100 mm dia including jointing to waste pipe fixed in and including PCC( 1:2:4) Type B-1 using 20mm graded crushed stone aggregate complete all as specified and directed.

S&F 15mm bore PVC connection pipe 450mm long with PTMT nuts complete all as specified & directed. Make:- Jaquar, Code- ALD 805B, or Equivalent Make of PRAYAG SYMET or COMMANDER or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & fix in repairs vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply & fix kitchen sink with drainage board made of stainless steel 1.0mm thick with plug, washers with and including 32 mm dia PVC rigid waste pipes and C.P coupling including fixing cantilever brackets of suitable shape & size as required at site and connecting unions to pipe, overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160mm and necessary cutting to slab complete all as specified & directed. Make:- Prayag Polymer Pvt Ltd or Jain Brothers Sanitation Pvt Ltd or Blue Star Silver Shine or Nirali or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

S&F, in repair, jet spray with 1m PVC tube, stainless steel, chromium plated for vitreous china padestal pattern water closet complete all as specified and directed. ( Make : Essco, Model No ALE-547 or Equivalent Make as approved by GE)

S&F of stainlesss steel peg set of 6, fixed to wall with PVC plugs and screw complete all as specified and directed.

S&F, in repair, chromium plated health faucet with 8 mm hole dia and 1.2m long flexible tubes with and including wall hook suitable for EWC including nut/washer complete all as specified and directed. ( Make : Jaquar, Code ALD-573 or Equivalent as approved by GE)

S&F curtain rod fancy type , PVC coated, made out of 25mm dia MS pipe having wall thickness 0.63mm bright finish, colour and pattern as approved by GE, including curtain ring and bracket complete all as specified and directed. Make: Aerolux/ MEC/ Vista.

S&F, in repair, glass corner shelves , complete all as specified and directed.( Make : Jaquar, Model No ACN-1173 or Equivalent Make as approved by GE)

S&F in repair toilet paper holder of vitreous china, coloured, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. ( Make : Jaquar , Cat No CAN-1153S or Equivalent Make as approved by GE)

S&F in repair soap dish holder fixed with screws complete all as specified and directed. (Make : Jaquar, Cat part No CAN-1131N or Equivalent Make as approved by GE)

Supply & Fix, in repair, Flushing plates (make moon, code CIS - CHR - 31181910X of Jaquar make or equivalent make as approved by GE) cistern and flushing pipe (exclusive of brackets) complete all as directed.

S&F soap dish of PVC fixed with rawl plugs and screw complete all as specified and directed.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but plastic water closet seat, black/ white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

S&F 0.63 mm thick stainless steel Kitchen plate racks, size 600 X 750 X 220 mm , fixed with wooden plug with suitable size of screws complete all as specified and directed. (Make-Prayag Cat No-P-330 or equivalent as approved by GE)

S&F in repair 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement Mortar (1:6) , complete all as specified and as directed by Engr-in-charge.

Supply & fix in repairs vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix in repair 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed. Make:- CERA or PARRYWARE or HINDWARE or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Supply and fix in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply and fix in repair 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply and fix 110mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply and fix 75mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply & fix PVC (SWR) junction single, (single T), equal or unequal , 75mm bore complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply & fix PVC (SWR) junction single, (double T), equal or unequal , 110mm bore complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

S & F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal. Make : Finolex/ Kisan/ Supreme/ Prince.

Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe-410-(Gde E-250) quality B complete all as specified and directed.

Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed at site.

Taking down existing old/ unserviceable sub main wiring of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified and directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one light point/ceiling fan point/exhaust fan point controlled by one no one way switch 5/6 Amps complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for Bell point controlled by one 5/6 Amps bell push one way switch complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on the same board with other switches complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket outlet 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.

M&L for point wiring concealed type with 2.50 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.

M/L for Modular socket outlet 6 Amps 2/3 pin, AC 230 volts flush type complete all as specified and as directed .

Supply & fix in replacement of modular switch , 15/16 Amps, flush type, complete all as specified & directed.

Supply & fix in replacement of modular socket outlet 15/16 Amps multipurpose pin, 15/16 Amps , and one pin 6 Amp complete all as specified & directed.

Supply & fix, in replacement, ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed.

Supply & Fixing Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed.

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 240 Volts complete all as specified & directed. Make:- Anchor or Cona or Plaza as approved by GE.

S & F modular switch bell push 6 amp, 1 module, 230 Volts complete all as specified and directed at site.

S & F modular switch piano flush type 6 amp, 230 Volts, single pole one way complete all as specified and directed at site.

S&F lamp holder PVC/Polycarbonate type body, with back plate for batten fittings with and including LED lamp 9 Watt complete all as specified and directed .

Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), (Make : Philips Cat part No BN 021 LED 22S 6500/4000 PSU GR S1 or Equivalent as approved by GE)

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25 sqmm, 4 core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 35sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 6sqmm, 2core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

S&F, in replacement, sheet metal enclosure distribution boards, double door, factory made TPN Vertical 4 way 3 phase 415 volts with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits, one incoming MCCB and 12 outgoing MCBs circuits, comprising of 3 phase 4 wire of suitable rating complete all as specified and directed with the following accessories :- Incoming : (a) MCCB 100 amps, 16 KA, TP, 415 volts, 50 Hz = 01 No. (Note:- Out going MCB shall be measured and paid for separately)

S & F sheet metal enclosure MCB DB 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good the distrubed surface to match with the existing specification of wall complete all as specified and as directed.

M&L for provision of sub main wiring with four runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including two run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with four runs of 6.0 sqmm cable & two run of 6 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

Taking down existing exhaust/ ceiling fan of any size/ sweep for keeping the safe custody and re-fixing/ re-hanging the same after repair work or as directed and connecting up the same with & including twin twisted copper flexible wire from ceiling rose to exhaust/ ceiling fan complete all as specified & directed.

Taking down Geyser any type in situ and refixing after servicing, repairing and painting including scratching old paint and preparation of surface for painting with one coat of white synthetic enameled paint , complete all as specified and directed.

Supply and fixing, in replacement, decorative wall light fitting with lamps 9 watt made up of Polycarbonate , , Cylindrical shape , with LED lamp complete with fixing arrangements on wall complete all as specified and as directed. (Make : CITY 1 OF HAVELLS /luker light code no LWL-110-2 or equivalent in Bajaj/Philips/CG as approved by GE)

Supply & fix, in replacement, LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75+ 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens including mounting bracket made out of GI pipe 40 mm dia medium Grade ISI Marked not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint complete all as specified and as direced .

Supply & fix AC Three phase static energy meter of accuracy class 1.0 ,3 X 240 V ,50 Hz with Backlit LCD display of rating 10 - 60 A which measures and displays KWH ,V, Current I, KW, pf, last month history of KWH, MD in KW etc including taking down and depositing old meter to E/M stores at MES Yard of GE (West) Jabalpur.( Make : Sprint 350 of Secure/HPL/Havells as approved by GE) ( Note : The meter shall carry warranty of 5 years)

Supply & fixing integral post top lanterns complete with Black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with and including 10watt LED lamp , GI pipe as required to fix in gate pillar complete all as specified and directed.

Supply and fix Single phase propeller type Exhaust fan heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvrers and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply & fix MCB SP, 6 Amp to 32 Amp, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- ABB/ Legrand/ Siemens/ L&T/ Havells as approved by GE.

S & F, in replacement, MCB 63 amps TPN, 415 volts complete all as specified and directed.

S&F , in replacement, single pole and neutral sheet metal enclosures with two pin & earth plug and socket complete with and including one single pole MCB of 20 Amps complete all as specified and as directed.

S & F stepped type electronic fan regulator flush Type on the existing phenolic laminated sheet complete all as specified and directed at site.

S & F LED Mirror light fitting 2 ft TL 5 -10/12 watt complete all as specified and directed .Make- Havells Cat part No - LUMILINE PLUS SBS10W LED 865SPCSS or equivalent in PHILIPS ,BAJAJ as approved by GE)

Supply,laying & fixing Double Wall Corrugated (DWC) pipes made of High Density Polyethylene (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. complete all as specified and as directed , outer dia 50 mm and inner dia 38 mm ( Make :- Telerex/Tirupati or Eqivalent Make as approved by GE)

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Schedule of credit amount of Rs. 1,05,140.00 to be deducted during AOC

Kirti Chandeliya and Assosicates

M/S RAJ BUILDERS

Chetna Enterprises

MAYOOKH CONSTRUCTION

ELITE ENGINEERING COMPANY

G S K CONSTRUCTION

Tiki Water proofing Co

JAIDEV SINGH CHADHA