Provision of raising of Platform to High Level and FOB at Barelipar and Iklehra station of Nagpur Division under UMB 2024-25 under PH-53

Amla sub-division.

Item- 01 MS Item (DSR-2023)

S No. Item No Description of Item Unit Qty Rate Amount

2.0 EARTH WORK

2.1S General

Earth work in excavation by mechanical

means (Hydraulic excavator) / manual

means in foundation trenches or drains (not

exceeding 1.5 m in width or 10 sqm on

2.8 plan), including dressing of sides and

ramming of bottoms, for all lift, including

getting out the excavated soil and disposal

of surplus excavated soil as directed, within

a lead of 50 m.

4.0 CONCRETE WORK

4.1S CEMENT CONCRETE (CAST IN SITU)

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing and laying in position cement

concrete of specified grade excluding the

cost of centering and shuttering - All work

up to plinth level :

derived from natural sources : 6 graded

stone aggregate 20 mm nominal size

derived from natural sources)

derived from natural sources : 6 graded

stone aggregate 40 mm nominal size

derived from natural sources)

4.10S DAMP-PROOF COURSE

4.11 Providing and laying damp-proof course Sqm 4.14 495.75 2052.41

50mm thick with cement concrete 1:2:4 (1

cement : 2 coarse sand (zone-III) derived

from natural sources : 4 graded stone

aggregate 20mm nominal size derived from

natural sources).

5.0 REINFORCEMENT CEMENT CONCRETE

5.1S CAST IN SITU

5.3 Reinforced cement concrete work in beams, cum 6.38 11505.5 73405.09

suspended floors, roofs having slope up to

15 degree landings, balconies, shelves,

chajjas, lintels, bands, plain window sills,

staircases and spiral stair cases above

plinth level up to floor five level, excluding

the cost of centering, shuttering, finishing

and reinforcement with 1:1.5:3 (1 cement :

1.5 coarse sand(zone-III) derived from

natural sources : 3 graded stone aggregate

20 mm nominal size derived from natural

5.9S FORM WORK

Centering and shuttering including

5.9 strutting, propping etc. and removal of form

5.9.1 Foundations, footings, bases of columns, Sqm 25.85 392.15 10137.08

etc. for mass concrete

5.9.5 Lintels, beams, plinth beams, girders, Sqm 32.4 736.4 23859.36

bressummers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts Sqm 10.88 961.3 10458.94

5.22S STEEL REINFORCEMENT

Steel reinforcement for R.C.C. work

including straightening, cutting, bending,

placing in position and binding all complete

upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Kg 1700 107.85 183345

Fe-500D or more.

5.33S DESIGN MIX CONCRETE

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing and laying in position ready

mixed or site batched design mix cement

concrete for reinforced cement concrete

w o r k ; u s i n g coarse aggregate and fine

aggregate derived from natural sources,

Portland Pozzolana / Ordinary Portland

/Portland Slag c e m e n t , admixtures in

recommended proportions as per IS: 9103

5.33 to accelerate / retard setting of concrete, to

improve durability and workability without

impairing strength; including pumping of

concrete to site of laying, curing, carriage

for all leads; but excluding the cost of

centering, shuttering, finishing and

reinforcement as per direction of the

engineer-in-charge, for the following grades

5.33.1 All works upto plinth level

cement content of 330 kg /cum

All works above plinth level upto floor V

cement content of 330 kg /cum

6.0 MASONRY WORK

6.26S EXPOSED BRICK WALL

Brick work with non modular fly ash bricks

conforming to IS:12894, class designation

6.34 10 average compressive strength in super

structure above plinth level up to floor V

9.0 WOOD AND P.V.C. WORK

9.40S MISCELLANEOUS-WOOD WORK

Providing and fixing M.S. grills of required

pattern in frames of windows etc. with M.S.

9.48 flats, square or round bars etc. including

priming coat with approved steel primer all

9.48.2 Fixed to openings /wooden frames with rawl Kg 2 238.35 476.7

plugs screws etc.

ANODISED ALUMINIUM FITTINGS (ALL

FITTINGS SHALL BE ISI MARKED)

Providing and fixing aluminium sliding door

bolts, ISI marked anodised (anodic coating

9.96 not less than grade AC 10 as per IS : 1868),

transparent or dyed to required colour or

shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts,

ISI marked, anodised (anodic coating not

less than grade AC 10 as per IS : 1868 )

transparent or dyed to required colour or

shade, with necessary screws etc. complete

Providing and fixing aluminium handles, ISI

marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or

shade, with necessary screws etc. complete

9.105S GYPSUM BOARD PARTITIONS

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

9.119 Providing and fixing factory made P.V.C. Metre 5.7 492.7 2808.39

door frame of size 50x47 mm with a wall

thickness of 5 mm, made out of extruded 5

mm rigid PVC foam sheet, mitred at corners

and joined with 2 Nos of 150 mm long

brackets of 15x15 mm M.S. square tube,

the vertical door frame profiles to be

reinforced with 19x19 mm M.S. square tube

of 19 gauge, EPDM rubber gasket weather

seal to be provided through out the frame.

The door frame to be fixed to the wall using

M.S. screws of 65/100 mm size, complete

as per manufacturer's specification and

direction of Engineer- in-Charge.

Providing and fixing factory made panel

PVC door shutter consisting of frame made

out of M.S. tubes of 19 gauge thickness and

size of 19 mm x 19 mm for styles and

15x15 mm for top & bottom rails. M.S.

frame shall have a coat of steel primers of

approved make and manufacture. M.S.

frame covered with 5 mm thick heat

moulded PVC 'C' channel of size 30 mm

thickness, 70 mm width out of which 50 mm

shall be flat and 20 mm shall be tapered in

45 degree angle on both side forming styles

and 5 mm thick, 95 mm wide PVC sheet out

of which 75mm shall be flat and 20 mm

shall be tapered in 45 degree on the inner

side to form top and bottom rail and 115

mm wide PVC sheet out of which 75 mm

shall be flat and 20 mm shall be tapered on

both sides to form lock rail. Top, bottom

and lock rails shall be provided both side of

the panel. 10 mm (5 mm x 2 ) thick, 20 mm

wide cross PVC sheet be provided as gap

insert for top rail & bottom rail, panelling of

5 mm thick both side PVC sheet to be fitted

in the M.S. frame welded/ sealed to the

styles & rails with 7 mm (5 mm+2 mm)

thick x 15 mm wide PVC sheet beading on

inner side, and joined together with solvent

cement adhesive. An additional 5 mm thick

PVC strip of 20 mm width is to be stuck on

the interior side of the 'C' Channel using

PVC solvent adhesive etc. complete as per

direction of Engineer-in-charge,

manufacturer's specification & drawing.

9.120.2 30 mm thick pre laminated PVC door Sqm 1.8 3663.8 6594.84

11.0 FLOORING

11.16S TILE FLOORING

Chequered precast cement concrete tiles

22 mm thick in footpath & courtyard,

jointed with neat cement slurry mixed with

11.20 pigment to match the shade of tiles,

including rubbing and cleaning etc.

complete, on 20 mm thick bed of cement

mortar 1:4 (1 cement: 4 coarse sand).

19 11.20.3 Dark shade pigment using ordinary cement Sqm 2 1119.5 2239

11.37S CERAMIC GLAZED TILES

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

11.37A Providing and fixing 1st quality ceramic Sqm 24 1112.7 26704.8

glazed floor tiles conforming to IS : 15622

(thickness to be specified by the

manufacturer ) of approved make in all

colours, shades except burgundy, bottle

green, black of any size as approved by

20 Engineer-in-Charge in skirting, risers of

steps and dados over 12 mm thick bed of

cement Mortar 1:3 (1 cement: 3 coarse

sand) and jointing with grey cement slurry

@ 3.3kg per sqm including pointing in white

cement mixed with pigment of matching

shade complete.

11.39 Providing and laying rectified Glazed Sqm 9 1330 11970

Ceramic floor tiles of size 300x300 mm or

more (thickness to be specified by the

manufacturer), of 1st quality conforming to

IS : 15622, of approved make, in colours

21 White, Ivory, Grey, Fume Red Brown, laid

on 20 mm thick cement mortar 1:4 (1

Cement: 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sqm including

grouting the joints with white cement and

matching pigments etc., complete.

12.0 ROOFING

12.37S RAIN WATER SPOUT AND PIPE

Providing and fixing on wall face

unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain

12.42 water pipes conforming to IS : 13592 Type

A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap

for thermal expansion.

12.42.4 Single tee without door

13.0 FINISHING

13.1S CEMENT PLASTER (IN FINE SAND)

13.1 12 mm cement plaster of mix :

13.37S INTERIOR FINISHING

Distempering with 1st quality acrylic

distemper (ready mixed) having VOC

content less than 50 gram/litre, of approved

manufacturer and of required shade and

colour all complete to achieve even shade

13.41.1 New work (two or more coats) over and Sqm 36 185.65 6683.4

including water thinnable priming coat with

cement primer having VOC content less

than 50 gram/litre

13.44S EXTERIOR FINISHING

Finishing walls with Premium Acrylic Smooth

13.47 exterior paint with Silicone additives of

required shade:

13.47.1 New work (Two or more coats applied @ Sqm 36 171.1 6159.6

1.43 ltr/10 sqm over and including priming

coat of exterior primer applied @ 0.90

17.0 SANITARY INSTALLATIONS

17.1S General

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing and fixing white vitreous china

pedestal type water closet (European type

W.C. pan) with seat and lid, 10 litre low

level white P.V.C. flushing cistern, including

17.2 flush pipe, with manually controlled device

(handle lever), conforming to IS : 7231, with

all fittings and fixtures complete, including

cutting and making good the walls and

floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic Each 1 6515.55 6515.55

Providing and fixing one piece construction

white vitreous china squatting plate with an

integral longitudinal flushing pipe, white

P.V.C. automatic flushing cistern, with

fittings, standard size G.I. / PVC flush pipe

17.6 for back and front flush with standard

spreader pipes with fittings, G.I clamps and

C.P. brass coupling complete, including

painting of fittings and cutting and making

good the walls and floors etc. wherever

17.6.1 Single squatting plate with 5 litre P.V.C. Each 1 9256.45 9256.45

automatic flushing cistern

Providing and fixing wash basin with C.I.

brackets, 15 mm C.P. brass pillar taps, 32

mm C.P. brass waste of standard pattern,

including painting of fittings and brackets,

cutting and making good the walls wherever

17.7.2 White Vitreous China Wash basin size Each 1 2226.35 2226.35

28 630x450 mm with a single 15 mm C.P.

brass pillar tap

17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet Each 1 349.15 349.15

with flexible tube upto 1 metre long with

29 S.S. triangular plate to European type W.C.

of quality and make as approved by

Engineer - in - charge.

Providing and fixing P.V.C. waste pipe for

17.28 sink or wash basin including P.V.C. waste

fittings complete.

17.28.1 Semi rigid pipe

Providing and fixing mirror of superior glass

(of approved quality) and of required shape

17.32 and size with plastic moulded frame of

approved make and shade with 6 mm thick

hard board backing :

Providing and fixing PTMT Bottle Trap for

Wash basin and sink.

17.70.1 Bottle trap 31mm single piece moulded Each 1 367.1 367.1

with height of 270 mm, effective length of

tail pipe 260 mm from the centre of the

waste coupling, 77 mm breadth with 25 mm

minimum water seal, weighing not less than

Providing and fixing PTMT towel rail

complete with brackets fixed to wooden

17.73 cleats with CP brass screws with concealed

fittings arrangement of approved quality

17.73.2 600 mm long towel rail with total length of Each 1 708.95 708.95

33 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms.

18.0 WATER SUPPLY

18.7S C.P.V.C. PIPES

NAGPUR CR DIVISION-ENGINEERING/CENTRAL RLY

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply,

including all CPVC plain & brass threaded

fittings and fixing the pipe with clamps at

1.00 m spacing. This includes jointing of

18.8 pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and

making good the same including testing of

joints complete as per direction of Engineer

in Charge. Concealed work, including

cutting chases and making good the walls

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply

including all CPVC plain & brass threaded

18.9 fittings This includes jointing of pipes &

fittings with one step CPVC solvent cement,

trenching, refilling & testing of joints

complete as per direction of Engineer in

Charge. External work

18.15S BRASS FITTINGS

Providing and fixing gun metal gate valve

18.17 with C.I. wheel of approved quality

(screwed end) :

Providing and fixing ball valve (brass) of

18.18 approved quality, High or low pressure, with

plastic floats complete :

C.I. SLUICE VALVES/ FIRE HYDRANTS &

18.48 Providing and placing on terrace (at all floor Per Litre 1000 11 11000

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable

40 locking arrangement and making necessary

holes for inlet, outlet and overflow pipes but

without fittings and the base support for

18.49S C.P. BRASS FITTINGS

Providing and fixing C.P. brass angle valve

18.53 for basin mixer and geyser points of

approved quality conforming to IS:8931

18.54S PTMT FITTINGS

Providing and fixing PTMT bib cock of

approved quality and colour.

weighing not less than 88 gms

18.59S AIR VALVE & WATER METER (BULK TYPE)

18.65 Providing and fixing PTMT soap Dish Holder Each 1 111.45 111.45

having length of 138mm, breadth 102mm,

43 height of 75mm with concealed fitting

arrangements, weighing not less than 106