NIT NO. 382/DURG(Durg)/2026

N.I.T. Schedule for Construction of Balance work (Third & Fourth Floor) Nursing Hostel at C.C.M.G.M.C.H. Kachandur, Front Side of Boundary Wall at Chandulal Chandrakar Memorial Govt. Medical College & Hospital, Kachandur, Repair Work of Window work ar Chandulal Chandrakar Memorial Govt. Medical Coolege & Hospital Building Kachandur, Distt. - Durg (C.G.)

P.A.C. Amount 73.53 Lacs

S. No. Department SOR Year Item Code Particular's UOM Rate Qty. Amount

1 PWD BLDG 2026 16.43 Demolishing cement concrete including disposal of material within 50 metre lead.

Ch. 1.0 Earth Work

2 PWD BLDG 2026 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). Sqm 6.00 355.20 2131.00

3 PWD BLDG 2026 1.4 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. Sqm 3.00 341.60 1025.00

Ch. 2.0 Formwork

4 PWD BLDG 2026 2.1 Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, base of columns and plinth beam in any shape and size. Sqm 118.00 138.00 16284.00

2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. Sqm 156.00 22.56 3519.00

2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape Sqm 252.00 112.32 28305.00

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) Sqm 200.00 10.56 2112.00

2.1.8 Beams, lintels, cantilevers & walls Sqm 172.00 138.48 23819.00

Ch. 3.0 Cement concrete (Palin and Reinforced)

5 PWD BLDG 2026 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. (Note :Excess/ less cement used as per design mix is payable/ recoverable separately)

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). Cum 3539.00 45.24 160087.00

6 PWD BLDG 2026 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Cum 83.00 19.90 1651.00

7 PWD BLDG 2026 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending etc. complete as per drawing including cost of binding wire. All complete.

3.12.1 Thermo-Mechanically treated bars FE 415 Kg 46.00 8447.87 388602.00

Ch. 4.0 Water Proofing

8 PWD BLDG 2026 4.13 Grading roof for water proofing treatment with:

4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 3244.00 32.68 106009.00

Ch. 7.0 Brick Work

9 PWD BLDG 2026 7.11 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in superstructure above plinth level.

7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand) Sqm 325.00 145.08 47151.00

10 PWD BLDG 2026 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Sqm 9.00 145.08 1306.00

11 PWD BLDG 2026 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. Sqm 53.00 145.08 7689.00

Ch. 8.0 Wood and PVC Work

12 PWD BLDG 2026 8.148 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge

8.148.1 Extruded section Profile size 48x40 mm. Meter 162.00 137.20 22226.00

13 PWD BLDG 2026 8.15 Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification. Sqm 2196.00 39.20 86083.00

14 PWD BLDG 2026 9.18 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in profile section applying a priming coat of red oxide zinc chromate primer.

9.18.3 Single rebate/ mullion 100mmx50mm size, 1.25mm thick sheet. Meter 332.00 145.60 48339.00

15 PWD BLDG 2026 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part- I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

8.12.2 35 mm. thick (single leaf) Sqm 1704.00 58.80 100195.00

16 PWD BLDG 2026 8.18 Providing and fixing lipping with second class teak wood lipping on all edges of shutters.

17 PWD BLDG 2026 8.132 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete.

18 PWD BLDG 2026 8.137 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.

19 PWD BLDG 2026 8.138 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete.

20 PWD BLDG 2026 8.139 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete.

21 PWD BLDG 2026 8.14 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete.

22 PWD BLDG 2026 8.143 Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete.

Ch. 9.0 Steel And Aluminium Work

23 PWD BLDG 2026 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. Kg 57.00 3117.31 177687.00

24 PWD BLDG 2026 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete. Sqm 672.00 106.54 71595.00

25 PWD BLDG 2026 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:

9.47.1 For fixed portion Kg 281.00 3213.493 902992.00

9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). Kg 287.00 2026.26 581537.00

26 PWD BLDG. 2026 9.48 Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. Kg 23.00 4465.10 102697.00

27 PWD BLDG. 2026 9.49 Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized. Kg 29.00 4465.10 129488.00

28 PWD BLDG. 2026 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

9.51.1 With float glass panes of 4 mm thickness Sqm 519.00 450.69 233908.00

29 PWD BLDG 2026 9.51 Providing and fixing 12mm thick pre laminated particle board flat pressed with decorative lamination and balancing lamination on specified sides exterior Grade – I MDF Board 12 mm thick confirming to IS:14587, including fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete.

9.51.3 With decorative lamination on one side and balancing lamination on other side. Sqm 718.00 139.86 100419.00

30 PWD BLDG 2026 9.57 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete.

Ch. 12.0 Flooring

31 PWD BLDG 2026 12.7 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

32 PWD BLDG 2026 12.9 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.

33 PWD BLDG 2026 12.79 Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0 mm thick layer) VITRIFIED floor tiles with water absorption less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours and shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortar 1:4 (1cement: 4 coarse sand) including grouting the joints with withe cement and matching pigments etc. complete.

12.79.1 Size 600x600mm thickness 9 to 10mm Sqm 920.00 243.16 223707.00

34 PWD BLDG 2026 12.81 Providing and laying tactile tile rubber mounded precast concrete tile wet tranverse strength not less than 3N/mm2 (for vision impaired persons as per standard laid down in CPWD guide lines) of size having 300x300 and total thickness 30 mm in all colour according to I.S.13801-2013 laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc.

12.81.2 Strip pattern directional tactile 23 mm strip 4nos equally spaced and 5mm exposed to the surface Sqm 842.00 35.10 29554.00

35 PWD BLDG 2026 12.45 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above)

12.45.2 Granite stone black Sqm 2249.00 19.38 43586.00

36 PWD BLDG 2026 12.44 Extra for nosing in Granite stone for treads. Meter 107.00 19.38 2074.00

37 PWD BLDG 2026 17.1 Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead :

17.1.1 Thickness upto 15mm Sqm 112.00 362.14 40560.00

Ch. 14.0 Distempering, painting and Finishing

38 PWD BLDG 2026 14.59 Providing and applying Polymaric cement primer on all surface applied @ 0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 (product such as Birla white primacoat /activcoat, Asian Trucare , Dulux interior cement primer, Opus Calista / I10 ) with all tool tackles and labour etc. complete for the work . Sqm 25.00 7590.18 189755.00

39 PWD BLDG 2026 14.62 Providing and applying Acrylic washable Distemper or lite economy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applied @ 1.25 Kg/ 10Sqm as per relevant I.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark , Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work. Sqm 54.00 3540.09 191165.00

40 PWD BLDG 2026 14.57 Providing and applying 2mm thick white cement based Acrylic grade putty with minimum 3 coats applied @ 4.0 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Asian trucare, Berger Happy walls Putty , Birla Opus One pro smooth) to make the surface smooth and even with all tools tackles and labour etc. complete for the work . (This Item to be use in heigher grade painting works Item No. 14.65) Sqm 81.00 3540.09 286747.00

41 PWD BLDG 2026 14.64 Providing and applying Premium plastic emulsion paint with roller application minimum three coats applied @ 0.75 lit / 10 Sqm up to finalfinish as per relevant I.S. Code 15489:2013 Type -1 Class D & C ( Glossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium , Dulux Super Cover, Berger Easy Clean , Nippon Breezee Metex Gold, Opus I-50 / Calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.(with 3 year Warranty) Sqm 71.00 3540.09 251346.00

42 PWD BLDG 2026 14.71 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. Sqm 113.00 260.34 29418.00

43 PWD BLDG. 2026 14.68 Providing and applying on exterior surface with PREMIUM Exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied @ 1.40 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C (Glossy /Semi Glossy finish ) (Product such as Asian Apex , Dulux Weather Shield Prima E900 , Berger Weathercoat Antidust , Nerolac Everlas Excel , Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and articleand cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.(With 3Year Warranty.) Sqm 71.00 534.06 37918.00

44 PWD BLDG 2026 18.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :

18.1.3 White Orissa pattern W.C. pan of size 580x440 mm Each 2464.00 28.00 68992.00

45 PWD BLDG 2026 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

46 PWD BLDG 2026 18.20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

47 PWD BLDG 2026 18.21 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

48 PWD BLDG 2026 18.30 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

18.30.1 5mm thick mirror Sqm 1714.00 10.50 17997.00

49 PWD BLDG 2026 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

50 PWD BLDG 2026 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°

18.77.3 Vent covel

18.77.2 Double "Y" with or without door

18.77.5 "P" trap 110mmx110mm long Each 193.00 70.00 13510.00

18.77.6 Nahani trap 110x75mm Each 77.00 90.00 6930.00

Ch. 19.0 Water Supply

51 PWD BLDG 2026 19.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

INTERNAL WORK - EXPOSED ON WALL

19.4.1 15 mm nominal outer dia .Pipes. meter 94.00 600.00 56400.00

19.4.2 20 mm nominal outer dia .Pipes. meter 128.00 300.00 38400.00

52 PWD BLDG 2026 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

CONCEALED WORK including cutting chases and making good the walls etc.,

19.5.1 15 mm nominal outer dia .Pipes. meter 113.00 30.00 3390.00

19.5.2 20 mm nominal outer dia .Pipes. meter 142.00 40.00 5680.00

53 PWD BLDG 2026 19.60 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

19.6.1 15 mm nominal outer dia .Pipes. Each 78.00 392.00 30576.00

19.6.2 20 mm nominal outer dia .Pipes. Each 103.00 196.00 20188.00

54 PWD BLDG 2026 19.13 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality:

19.13.2 Stop cock (350 grams) Each 201.00 20.00 4020.00

55 PWD BLDG 2026 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:

19.14.2 Long nose bib cock (500 grams) Each 387.00 16.00 6192.00

19.14.3 Long body bib cock (500 grams) Each 362.00 14.00 5068.00

19.14.16 Towel rail (600mm long x 20mm dia) Each 287.00 56.00 16072.00

56 PWD BLDG 2026 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Liter 6.00 8000.00 48000.00

57 PWD BLDG 2026 19.5 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : Each 9368.00 4.00 37472.00

58 PWD BLDG 2026 19.49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : Each 6811.00 4.00 27244.00

Ch. 20.0 Drainage

59 PWD BLDG 2026 20.20 Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased allround with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centring and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications :

20.2.2 150 mm dia. sand cast iron drop connection Each 5521.00 63.66 351467.00

60 PWD BLDG 2026 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. Each 1453.00 10.00 14530.00

61 PWD BLDG 2026 16.3 Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.

16.3.3 In cement mortar. Cum 224.00 66.00 14784.00

62 PWD BLDG 2026 2.1 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). Sqm 6.00 300.00 1800.00

63 PWD BLDG 2026 15.2 Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified diameter and length below the pile cap in cement concrete M-35 grade, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with, bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap):

64 PWD BLDG 2026 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soil (Column) Cum 157.00 28.34 4449.00

65 PWD BLDG 2026 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). Cum 2525.00 7.51 18963.00 100 23.4 76.6

66 PWD BLDG 2026 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 11.7

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) Cum 2774.00 42.38 117573.00 88.3

67 PWD BLDG 2026 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Cum 103.00 42.38 4366.00

68 PWD BLDG 2026 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) Sqm 78.00 255.00 19890.00

69 PWD BLDG 2026 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) Sqm 91.00 255.00 23205.00

70 PWD BLDG 2026 3.21 Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete.

71 PWD BLDG 2026 9.16 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

9.16.2 Angle-iron frames Kg 62.00 487.20 30206.00

72 PWD BLDG 2026 9.4 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineerin- charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) metre 139.00 100.00 13900.00

73 PWD BLDG 2026 9.41 Providing and fixing concertina fencing with reinforced barbed tape (R.B.T.) up to 3m height of wall with existing angle iron in any shape in one or more rows in horizontal/ vertical/inclined alignment tied with G.I. staples and G.I. clips including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)(RBT tape to be measured for each row) metre 12.00 600.00 7200.00

74 PWD BLDG 2026 14.74 Providing and applying satin/ matt finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian satin Enamel, Dulux Promise Premium Enamel, Nerolac Synthatic Enamel, Opus Prime enamel) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. Sqm 113.00 25.65 2898.00