REPAIR REPLACEMENT OF JOINERY/ PLASTERING, FLOORING, PLINTH PROTECTION, RAIN WATER PIPE, SANITARY APPLIANES AND MISC B/R ITEMS OF ELECTRIC INSTALLATION UNDER GE (AF) ADM AREA AT AF STATION GWALIOR

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each including iron mongeries complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4.0 Sqm each including iron mongeries complete all as specified and directed.

Taking down old shutter exc 1.0 sqm but n exc 2.0 Sqm complete all as spd and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window /Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricate with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property and fire retardant fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia & length complete all as spd and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window /Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricate with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property and fire retardant fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia & length complete all as spd and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F of Factory made wire gauzed PVC door shutter 28 to 30 mm thick (style) consisting of wire gauze in lieu of PVC sheet panel inside stiles and rails and decorative PVC beading of 10 mm x 10mm (900) frame made out of MS tubes for top & bottom rails.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly. MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, suppling & fixing in the frame at site as per specification & drg in SSR Part II. complete all as spd and as directed.

S&F factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3 mm (+ -0.2 mm). Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm), sliding sash (42 mm x 67mm). Sliding mesh Sash (42 mm x 57 mm) Sliding interlock (One vertical length in each shutters) (45.5 mm x 28 mm), Glazing bead (24.5 mm x 16 mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose) area not exceeding 2.0 sqm each complete all as spd & directed.

S&F 6 mm thick sheet glass ordinary quality as in doors, windows, hinged doors, partitions wall, automatic doors, etc and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S&F steel windows with side hung shutters incl Box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters incl Box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290 Gde-E-165 complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as spd and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide zink chrome complete all as specified and as directed.

M&L for preparation of new painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over coat of pink primer, complete all as specified and as directed.

S&F 100 mm long SS butt hinges medium weight, complete all as specified and directed .

S&F SS 150 mm long barrel tower bolts of extruded section & fixed complete all as specified and directed.

S&F SS 150 mm size handles cast type anodized complete all as specifed and directed

S & F 300 mm long SS, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F brass door spring of size 300 mm to wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed.

S & F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window / ventilator frame, shutters and partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed.

S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron).anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F in repairs 100 mm long SS butt hinges medium weight, complete all as specified and directed .

S&F in repairs SS 150 mm long barrel tower bolts of extruded section & fixed complete all as specified and directed.

S&F in repais SS 150 mm size handles cast type anodized complete all as specifed and directed

S & F in repairs 300 mm long SS, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F in repair 140 mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed.

S&F in repairs of brass door spring of size 300 mm to wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed.

Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, complete all as specified and directed.

&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples completed all as specified and directed.

M&L in repairs for 3 mm thick figured or pin head glass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane, size quantity or description from wooden frame/Steel frame/aluminium frame complete all as specified and directed.

S&F in repair fancy type decorated stainless steel curtain hanging rods 25 mm dia heavy duty (304 grade) including brackets, including fixing arrangement,heads at both ends and making up repair work and all fitting complete all as specified and directed.

Supply and fixing in repair of door beading 40 mm strip in bottom of door complete all as specified and directed.

S&F in repair, aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters up to 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F in repair double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed.

Taking down existing aluminium doors in any size and in any description with complete fittings and fixture and refixing in the same opening after repairing/servicing/greqasing & adjustment of floor spring etc complete all as specified and directed. Note: Material like aluminium snap beading, rubber gasket and glass shall be paid separately

Supply only powder coated aluminium snap beading as approved by GE

Supply only rubber gaskete for packing of glass panes as approved by GE

Plain Cement Concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work.

M&L for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed using spacers of 6 mm sze and joints filled with epoxy to match the shade of tiles over & including 15 mm thick screed bed in cement & sand mortar 1:6 with and including dismantling of old floor tiles etc complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 600 x 300 x 8-9 mm thick on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in CM 1:4 on wall with and inclluding dismantling of old wall tiles etc complete all as specified and directed.

Taking down cement plaster on stone/brick/concrete surfaces including racking out joint, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks staiaght or curved on plan exc 6 m mean radius built in cement motar 1:6 incl demolition of brick work built in cement motar or cement line motar as in pillars, brick wall, quoins, arches etc. complete all as specified.

Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately.

Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for plastering 5 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer over 2 mm wall care putty complete all as specified and as directed.

M & L for preparing new plaster surfaces of walls including chajjas, facias etc. and applying premium acrylic smooth exterior paint (100% acrylic) with silicone additives in two or more coats, that offers an anti-algal, excellent resistance to ultraviolet radiation, dirt pick up resistance (DPUR) property, rich sheen, low VOC, of approved shade over a coat of primer as per the manufacturer’s instructions, applying using brush, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note: - The paint shall be as per Apex Ultima of Asian Paints or equivalent as approved by GE.

Preparation of newly plastered surfaces on ceilings and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls including cornices, pilastered or unplastered surfaces by brooming down or steel wire brushing, to remove dust, dirt and loose scales of lime wash and other foreign material including screws, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of oil emulsion distemper on old decorated surfaces of walls etc, complete, all as specified & as directed.

M&L preparation of old surfaces of wall by removal of existing treatment and applying two coat of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance with low VOC less than 50Gram/Litre as per LEEDS specifications over a coat of primer of same manufacturer having anti algal properties diluted with water as per manufacturers instructions applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Complete all as specified and as directed. Note: (a) The work shall be executed from authorized applicator of make approved by Garrison Engineer. (b) Colour of OBD/ Exterior Emulsion paint shall be approved by GE

M&L for preparation of old surfaces (plastered or unplastered) of ceilings including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete, all as specified & directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old painted wood or wooden surfaces, of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

M & L for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Demolition of PCC in ground floors and paving n,exc 15 cm thickness (below or above ground level). Complete all as specified and as directed.

M&L 100 mm thick PCC 1:2:4 type B-I (using 20 mm graded stone agg) as in flooring/hardstanding etc finished even and smooth without using extra cement complete all as specified and directed.

M&L for 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protection etc complete all as spd and directed.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in flooring etc complete all as specified and as directed.

M&L for dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L for factory made 60 mm thick glossy finished rubberised interlocking paver blocks confirming to IS 15658-2006 of cement concret M-35 designation (compressive strength) of mixed colour, with grey cement and pigment including laid over and including 25 mm thick sand cushion with compaction etc complete all as specified and directed.

M & L for 20 mm thick machine cut granite tiles (any type) in skirting/dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with granite stone shade over and including 15 mm thick screed in cement mortar 1:6 including grinding and polishing complete all as specified and as directed.

M&L for heavy duty vitrified parking tiles of size 300 x 300 x 15 mm thick fixed over and including 15 mm thick screed bed in cement mortar 1:4 fixed using spacers of 5-6 mm and joints filled with epoxy etc for path/hardstanding of any type and pattern complete all as specified and directed.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and no pigment, laid over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed by the Eng in Charge

M&L machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar over 15 mm thick cement plaster in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed by the Eng in Charge

Dismantling timber scantlings 40 sq. cm and over in section in framed work , in any position complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W (GdeE-250) quality B complete all as specified and directed

M&L for dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F GI snap grid frame work (Size of grid 605 x 605 mm) for false ceiling complete all as specified and directed. Note:- GI Hanger wire shall be measured and paid seperately.

S&F for hangers 4 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.

S&F 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping complete all as specified and directed.

Dismantling of structural steel work including doors, gates etc. complete all as specified and directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including of steel sheeting or other covering, running rails and guides and hanging; also fastening and fixing etc Fe 410 -W(Gde-E- 250) quality-A oomplete all as specified and directed.

S& F 4 mm thick aluminium composite panel fixed to framed work and the joints of all panels around the frame and shall be made seamless from all sides with the use of silicon or as per manufacturers instructions complete all as specified and directed.

M&L for writing letters fabricated out of stainless steel sheet not less than 0.90mm thick and not less than 4 CM in width.The overall height of letters shall not be less than 30 CM and shall be fixed on aluminium composite panel as per manufacturers instructions complete all as specified and directed.

S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors or wall using Spun pipes CI pipes 100 mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed.

S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors/walls using Spun pipes CI pipes 75 mm bore pipes etc complete all as specified including dismantling old pipe with fittings complete all as specified and directed.

S&F 100 mm bore Cast Iton bend, any radius, Complete all as specified and as directed.

S&F 75mm bore Cast Iron bend, any radius, Complete all as specified and as directed

S&F GI tubing 15 mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 15 mm bore steel tubing etc complete all as specified and as directed.

S&F GI tubing 20 mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 20 mm bore steel tubing etc complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern) including flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern etc all as specified and directed..

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe incl PCC 1:5:10 type E2 in filling making good to floor etc all as specified.

S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device all as specifed and as approved.

S&F in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified and directed.

S&F in repair Brass chromium plated health faucets with flexible pipe length not less than 1.00 mtr (minimum) fixed for EWC/IWC suitable for 15mm bore pipe complete as directed.

S & F in repair Bib cock long body with flange, 15 mm dia, cast copper alloy, fancy type ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, Quarter turn with water saving nozzle complete all as specified and as directed.

S&F in repairs Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and pinning in ends of brackets or errecting stand, complete all as spd and as directed.

S&F in repair 15 mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110 gms complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) Complete all as spd and directed.

S&F urinal spreader of CP for fixing with 15 mm dia pipe.(Minimum weight 60 gms). Complete all as spd and directed.

S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed.

S&F in repairs PVC connections 15 mm size of PTMT of 600mm long. complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, quarter turn screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repair CP Shower rose with arms 125 mm dia with size complete all as specified and as directed

S&F in repairs brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. all as specified.

S&F in repair chromium plated hand shower with flexible pipe not less than 1 Meter suitable for 15 mm bore fittings complete all as specified and directed.

S&F in repair 125 mm chromium plated central hole grating dome with waste hole complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

S & F in repairs PVC water tank Cover with locking arrengement for 500 litres capacity water tank as per IS 12701: 1996 complete all as specified and as directed.

S & F in repairs PVC water tank Cover with locking arrengement for 1000 litres capacity water tank as per IS 12701: 1996 complete all as specified and as directed.

S&F in repairs rotational moulded polythene water storage tank of capacity 500 liters (Cylindrical /vertical with close top) triple layer construction fixed in position incld dismantling of old PVC tanks

S&F in repairs rotational moulded polythene water storage tank of capacity 1000 liters (Cylindrical /vertical with close top) triple layer construction fixed in position incld dismantling of old PVC tanks

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore pipe minimum weight 210 gms complete all as spd.

Please Enable Macros to View BoQ information