Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.3 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹38.8 L+₹3.2 L (9.09%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹39.9 L+₹4.3 L (12.1%)Rejected-Finance P O WEST SRIPURIA DIST TINSUKIA ASSAM PIN 786 145 | TINSUKIA | ASSAM | 786145 | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹40.8 L+₹5.3 L (14.8%)Rejected-Finance CHALIHA GAON PO CHALIHA DISTT JORHAT ASSAM PIN 785004 | JORHAT | ASSAM | 785004 | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹41.1 L+₹5.6 L (15.6%)Rejected-Finance A 153 HQ CE EC KOLKATA LEKHAPANI POST TINSUKIA DIST ASSAM STATE | L5 | Rejected-Finance Higher bid value |
Tender Value
₹35.7 L
EMD Value
₹71,400
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DINJAN
GE DINJAN, PANITOLA (PO), DIBRUGARH (DIST), ASSAM
PROVN OF TWO SANITARY BLOCK NEAR BLDG NO. T-13 AND T-15 IN UNIT AREA AND CERTAIN REVENUE AND MINOR WORKS UNDER GE DINJAN
2022_MES_540976_2
C/8464/E8
Open Tender
Civil Works
Item Rate
180 days
DINJAN MIL STN
AS PER TENDER DOCUMENT
10 documents required · 10 mandatory
₹500
GE DINJAN
₹71,400
Yes
11 Nov 2022
30 Aug 2022
12 Sept 2022
30 Aug 2022
10 Sept 2022
5 Sept 2022
60 days
Amount
Surface dressing not exceeding 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, or for shafts, wells, cesspits, manholes, pier holes, or laying of cables, poles, etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5 m but not exceeding 3m in depth for foundation, or for shafts, wells, cesspits, manholes, pier holes, or laying of cables, poles, etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.
Removal of surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and directed.
M&L for hardcore of brocken stone of gauge not exceeding 63 mm, deposited, spread, and leveled in layers not exceeding 15 cm thick, watered and rolled / rammed to a true surfaces complete all as specified and as directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed..
M&L for loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed.
M&L for PCC , type C2 (1:3:6) (using 40mm graded broken stone aggregate) as in foundations, filling and mass concrete, pole etc complete all as specified and as directed.
M&L for PCC , type D2 (1:4:8), (using 40mm graded broken stone aggregate) as in foundations, filling and mass concrete, pole etc complete all as specified and as directed.
M&L for PCC, type B2 (1:2:4), (using 40mm graded broken stone aggregate) as in surface channels and drains etc complete all as specified and as directed.
M&L for PCC, type B0 (1:2:4), ( using 12.5 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M&L for 100mm thick PCC, type D2 (1:4:8), (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.
M&L for providing precast cement concrete (1:2:4), type B1, (using 20 mm graded aggregate) as in landings, cover slabs and similar articles with plain faces set in cement mortar (1:4) complete all as specified and as directed
M&L for RCC (nominal mix), type B1 (1:2:4) (20 mm graded agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC (nominal mix), type B0 (1:2:4) (12.5 mm graded agg) as in walls, retaining walls, basement walls, ballast walls and the like, any thickness; above top of footings, including attached pilaster and buttresses complete all as specified and as directed.
M&L for RCC (nominal mix), type B1 (1:2:4) (20 mm graded agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for RCC (nominal mix) type B1 (1:2:4) (20 mm graded agg) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M&L for RCC (nominal mix) Type B1 (1:2:4) (20 mm graded agg) in column, pillar, piers, post and struts complete all as specified and as directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work complete all as specified and as directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc., vertical or to batter, rough finished flat surface of concrete complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished flat surface of concrete complete all as specified and as directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping) complete all as specified and as directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished flat surface of concrete complete all as specified and as directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for TMT bars 06 mm and over upto and incl 10 mm dia for stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. .
Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:4) complete as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in half brick thick walls complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in one brick thick honey comb walling complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement mortar in (1:4) using water proofing compound in top layer and finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound measured and paid separately.
M&L for rendering 10 mm thick of internal wall on fair faces of brick work or concrete surfaces in cement mortar in (1:6) and finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) including finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) including finished the surface even and smooth without using extra cement complete all as specified and as directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.
M&L for GI wire netting 0.90 mm dia, size of mesh 12 mm, lathing to wood or metal studding, joists, etc in walls, etc including all laps, cutting and waste complete all as specified and as directed.
M&L for 12 mm thick rendering on one side of lathing in cement mortar (1:6) and finished the surface even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 18 mm thick on other side of lathing surfaces in two layers (12 mm and 6 mm thick) in cement mortar (1:4) using water proofing compound in top layer and finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound measured and paid separately.
M&L for rendering 20 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (12 mm and 8 mm thick) in cement mortar (1:4) using water proofing compound in top layer and finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound measured and paid separately.
Supply only Liquid water proofing compound complete all as specified and directed
S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F for factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame, made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed.
S&F for powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.
S&F for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
M&L for PCC type C1,(1:3:6) (using 20 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and as directed.
S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe-290 (Gde E-165) complete all as specified and as directed.
S&F for 75mm long butt hinges, medium weight, cold rolled mild steel fixed to chowkats complete all as specified and as directed.
S&F for 100mm long butt hinges, medium weight, cold rolled mild steel fixed to chowkats complete all as specified and as directed.
S&F for 150 mm long mild steel, barrel tower bolts, stove enamelles black, with bright bolt complete all as specified and as directed.
S&F for aluminium anodised barrel tower bolts of extruded section 100 mm long complete all as specified and as directed.
S&F for aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and as directed.
S&F for aluminium handle 100 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.
S&F for aluminium handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed.
S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed
S&F for granite (of any type) tiles 18- 20mm thick machine cut, bedded and jointed with grey cement slurry including 15mm thick screed bed or bedding in cement mortar (1:6) and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed.
M&L for coloured glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick back coat of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed.
M&L for chequered cement concrete tiles of size 20cmx20cmx25mm thick, as in floors etc, and set and jointed in neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles including 15 mm thick screed bed or bedding in cement mortar (1:6) complete all as specified and as directed.
M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base in flooring finishing surface even and rough complete all as specified and as directed.
Demolition of unreinforced cement concrete in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed.
M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection incl making dummy joints finishing surface even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new plastered surfaces and applying three coat of white wash on wall complete all as specified and as directed.
M&L for preparation of new plastered surface of walls etc and applying two coats of cement base paint over alkali resistant priming paint complete all as specified and directed
M&L for preparation of old decorated plastered surfaces of walls by brooming down or steel wire brushing, scraping down with steel scraper, smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall cornices etc by brooming down or steel wire brushing, scraping down, the surfaces covered by smoke soot, growth of moulds and moos, efflorescent, having oil and greases spots and applying one coat of cement base paint (white or tinted) complete all as specified and as directed.
M&L for preparation of new plastered surface of walls etc and applying two coats of distempering interior walls with distemper oil emulsion white or tinted over a coat chalk whiting complete all as specified and as directed.
M&L for preparing old plastered surfaces of walls by washing, rubbing down and scraping of existing distempering/painted surfaces etc and applying one coat of distemper oil emulsion complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
S&F for 15 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.
S&F for 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.
Cutting into existing 50/40 mm GI pipe line making necessary arrangement gor taping of new pipe line of 25 mm dia including threading, welding complete all as specifieed and directed.
S&F for 20 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed, laid in trenches etc complete all as specified and directed.
S&F for 25 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed, laid in trenches etc complete all as specified and directed.
S&F for 40 mm bore, steel tubes, galvanised, medium grade with all fittings & fixed, laid in trenches etc complete all as specified and directed.
S&F for 25 mm bore, gun metal, gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.
S&F for 40 mm bore, gun metal, gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed.
S&F for 15 mm bore dia bib taps, chromium plated cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F for 15 mm bore dia stop valves, chromium plated cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F for 15 mm bore dia pillar taps, chromium plated, cast copper alloy, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
S&F in repair 15 mm bore dia bib taps, chromium plated cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair 15 mm bore dia stop valves, chromium plated cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair 15 mm bore dia stop valves (concealed type), chromium plated cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair 15 mm bore dia pillar taps, chromium plated, cast copper alloy, fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.
S&F for brass chromium plated shower rose, 125 mm size fixing to steel pipe or union complete all as specified and as directed.
S&F for 20 mm bore, ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F for PVC connections 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm long complete all as specified and as directed.
S&F for grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.
S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed.
S&F in repair for tubular towel rail, 20mm dia, D type, 60cm long brass chromium plated between flanges complete all as specified and as directed.
S&F for PVC low level flushing cistern, 10 liter capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC connection pipe and flush pipe of polyethylene of low or high density complete all as specified and as directed.
S&F in repair PVC low level flushing cistern, 10 liter capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC connection pipe and flush pipe of polyethylene of low or high density complete all as specified and as directed.
S&F for vitreous china squatting pan Orissa pattern of size 580mmx440 mm white, with integral foot rests connected with 'P' or 'S' trap (excluding flushing cistern and flush pipe) and provn of lime concrete bedding complete all as specified and as directed.
S&F for vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain ( outgoing pipe) and to flushing pipe, anti syphonage pipe, etc and making good to existing surface complete all as specified and as directed.
S&F for vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand (exclusive of fixing of supply and waste pipe) complete all as specified and as directed.
S&F for vitreous china urinals bowl, half stall type, white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
S&F for plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F in repairs 32 mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm?45gms/40mm-60 gms)complete all as specified and as directed.
M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 ltrs hoisted and fixed in position all as specified in SSR Part-1 and as directed.
M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position all as specified in SSR Part-1 and as directed.
M&L for 110 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and as directed.
M&L for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and as directed.
S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.
S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.
M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110 mm bore drain pipes complete all as specified and as directed.
M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore drain pipes complete all as specified and as directed.
Supply and laying, CPVC pipe of 16mm outer dia, SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed.
Supply and laying, CPVC pipe of 20mm outer dia, SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. tranches complete all as specified and directed.
S&F for 16mm outer dia, CPVC Brass thread elbow complete all as specified and as directed.
S&F for 20mm outer dia, CPVC Brass thread elbow complete all as specified and as directed.
S&F for 16mm outer dia, CPVC Brass thread Tee complete all as specified and as directed.
S&F for 20mm outer dia, CPVC Brass thread Tee complete all as specified and as directed.
S&F for 16mm outer dia, CPVC Brass thread union complete all as specified and as directed.
S&F for 20mm outer dia, CPVC Brass thread union complete all as specified and as directed.
S&F for 16mm outer dia, CPVC ball valve complete all as specified and as directed.
S&F for 20mm outer dia, CPVC ball valve complete all as specified and as directed.
Dismantling asbestos cement (corrugated or semi corrugated) sheet in roof covering complete all as specified and as directed.
S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F for joist, channel, angle, or tee sections of Fe 290 (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.
Dismantling unframed timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and directed.
M&L for second class hardwood in scantlings, wrought timber fixed, in unframed work complete all as specified and directed.
Dismantling of framed timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed.
S&F for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exceeding 6 Sqcm and not exceeding 13 Sqcm complete all as specified and directed.
Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L for anodised aluminium snap grid size 605 X 605 mm frame work for false ceiling complete all as specified and as directed.
M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium framework with screws complete all as specified and as directed
M&L for preparation of new plastered surface/boards of ceiling and applying three coats of white wash complete all as specified and as directed
S&F for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed
S&F for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
Taking down the chowkhats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.
Taking down the chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.
Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.
Taking downshutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description not exceeding 1.00 Sqm each and refixing in the same opening complete all as specified and directed.
Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and refixing in the same opening complete all as specified and as directed.
M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
M&L for 35 mm thick second class hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F for 30mm thick, glazed/skelton shutters with second class hard wood, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (b) complete all as specified and as directed.
S&F for 35mm thick, glazed/skelton shutters with second class hard wood, open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete all as specified and as directed.
S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
M&L for mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde E-165) complete all as specified and as directed.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new surfaces of steel or iron surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down carefully unserviceable aluminium/copper point wiring (light, fan, socket or power) complete, (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L for point wiring complete with 1.5 sqmm (FRLSH) nominal cross sectional area, PVC insulated unsheathed, multi stranded copper conductor single core cable 1100 volts grade, and including PVC casing and caping and fittings, and including provision of PVC insulated 1.5 sq mm copper conductor(FRLSH) for earth continuity (Green Colour) and connected to common earth dolly including 1.2mm thick pressed steel terminal switch boxes, 3mm thick bakelite sheets top cover (ISI marked) fitted with chromium plated brass screw & washers for fan/light point controlled by one switch complete all as specified and as directed. Note:- (a) PVC conduits/Casing-caping, two run cables and one run of earth wire will be measured as one length.) (b) cost of PVC casing and caping and fittings, cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with existing colour/paint of surface are deemed to be included in the quoted rate.
All as per item no. 159 here-in-before but one 3 pin, 5 Amp, socket outlet, independent complete all as specified and as directed.
All as per item no. 159 here-in-before but one 3 pin, 5 Amp, socket outlet, on the same board with other switches complete all as specified and as directed.
All as per item No. 159 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 3 pin socket outlet, 5/15 Amps on Independent board complete all as specified and as directed..
S&F for switch piano, 5 Amp single pole, flush type one way 230 volts bearing ISI marked complete all as specified and as directed.
S&F for socket outlet, 2 in 1, 3 pin, 5 Amps, flush type bearing ISI marked complete all as specified and as directed.
S&F for switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts bearing ISI marked complete all as specified and as directed.
S&F for switch socket combination, 2 in 1, 5/16 Amps, 240 volts, bearing ISI marked flush type complete all as specified and as directed.
S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed.
S&F for stepped type(five steps) electronic fan regulator flush type complete all as specified and as directed. Make : Model No. 14502 of Anchor or equivalent.
S&F in repair lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
S&F in repair LED bulb of 9 Watt complete all as specified and as directed. Make : Havells /Philips/Bajaj /Surya.
S&F for 20 watt, surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. Make : Havells/Philips/Bajaj/Crompton/Century.
S&F in repair factory made board distribution (DB) double door in sheet steel enclosure with common bus bar at incoming end, SPN, 8 way, 240 Volts suitable for housing MCBs complete all as specified and as directed.
S&F in repair factory made board distribution (DB) double door in sheet steel enclosure with common bus bar at incoming end, SPN, 4 way, 240 Volts suitable for housing MCBs complete all as specified and as directed.
S&F for MCB, double pole, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed.
S&F for MCB, 'C' Series, single pole, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed.
S&F for MCB, 'C' Series, SPN, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed.
Taking down unserviceable sub-main wiring up to 10 sqmm with rigid steel conduits/PVC casing-caping including cutting chases for taking out conduits and making good disturbed surfaces complete all as specified and as directed.
M&L for sub main wiring with two run of 6 Sqmm (nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.
S&F in repair PVC casing caping of size 20-25mm complete all as specified and as directed.
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4mm GI wire by means of bolts and nuts checknuts and washers protected by 20mm bore galvanised iron light grade pipe, funnel with 40mm bore GI medium grade pipe for watering, wire mesh including concrete pit PCC 1:3:6 type C1, precast RCC 1:2:4 type B1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 150 mm centre to centre in both direction and 10mm dia MS handle of suitable size, charchole or coke and salt in alternative layers, including necessary excavation and earth work in any type of soil, all as specified and shown in electrical plate no 3 of SSR part-1 complete all as specified and directed and tested on completion.
M&L for providing test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw including taking down old unserviceable complete all as specified and directed.
S&F for recess mounted deep drawn size (2 ft x 2 ft) CRCA housing with higher power 36 Watt LED Seamless front frame with flat white height transmission acrylic cover complete all as specified and as directed. Make : Cat. No. DROPDOWNFLAT2x2 PLR 36 W LED 840S of Havells/ Philips/ Bajaj.
S&F in repairs 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 complete all as specified and as directed. Make : Havells/Philips/Bajaj.
S&F for ceiling fan complete with electronic type fan regulator and accessories, 1200mm sweep, 230 Volt, BEE 5 star rated complete all as specified and as directed.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and as directed.
M&L for 40 mm bore, steel tubes, galvanised, light grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
M&L for horizontal boring road/path, not eceeding 15 metre in length by any method for 40mm dia GI pipe complete all as specified and as directed.
M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the UG cable laid in trenches) of 23cm spread thick ness and consolidated (punned) upto 18cm thickness, complete all as specified and as directed. Note : For the purpose of payment, punned thick-ness of sand cushioning only shall be measured and paid for.
S&F for sub-class B brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for UG cable protection complete all as specified and as directed.
M&L for PCC type C2 (1:3:6) (using 40mm graded broken stone aggregate) in foundations, filling and mass concrete, sub base of floor complete all as specified and as directed.
S&F for 20 Watt photon ultra LED Tube light (Single Side Connection) ultra bright LED polycarbonate Tube light with <10% THD with very high efficiency suited for installation in existing T8 fitting with G13 lamp holders complete all as specified and as directed. Make : Havells/ Philips/Bajaj.
S&F for 45 watt, LED building security light fitting including with GI bracket of 25mm bore not less than 1 mtr comes with pressure dia cast housing, prismatic polycarbonate diffuser, LEDs with secondary optic and IP65 protection complete all as specified and directed. Make:Havells/ Philips/Bajaj.
M/S Build Tech
MAZUMDAR ENTERPRISE
RAJIB GOSWAMI ENTERPRISE
R D Enterprises
AFTAB ENTERPRISES
M/S BORAH BROTHERS
jitendra narayan goswami
M/S RK Trading
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .