Construction of Entry Gate of Kufri Mahasu Peak - 2

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth all lead lift and sorting out useful and unuseful material and transportation of unuseful material for disposing at dumping site(To be arranged by contractor) as Directed by Engineer-in-charge. All kind of soils

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation and trenches (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth all lead lift and sorting out useful and unuseful material and transportation of unuseful material for disposing at dumping site(To be arranged by contractor) as Directed by the in-charge. All kind of soils

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundation, footings and bases for columns.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up top floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Mild steel and Medium Tensile steel bars

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Structural steel work in built up single section, M.S sheets chequered plate/sheet etc fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : cement mortar 1:6 Gate Platform

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

Polishing one or two coats with French polish on new wood and wood based surfaces like wood beam eaves board ceiling etc. to give an even surface including cleaning the surface of all dirt, dust, and sand papered smooth and including a coat of wood filler.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m²

Flashings/ Aprons.( Upto 600 mm)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand)

Providing eaves board 200mm x 25mm thick including fixing in position 1st class deaodar wood

Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates, principle rafters, common rafter edge beams, ridge beams, wooden battens under slates roofing etc and the like wrought framed, hoisted and fixed in position, including heavy duty metal plates, screws, nut and bolts for connection. 1st class deodar wood. (wood sleepers will be provided by the department)

Providing and fixing plain lining with tongued and grooved jointing with necessary screws/nuts & bolts/ nails, fixed on wooden frame work, complete as per direction of DFO (Frame work shall be paid for separately). 1st class deodar wood 20 mm (Wood will be provided by the department ) Covering all steel columns and beams

Providing and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work and cover fillets to be measured and paid for separately) 1st class deodar wood 20 mm (Wood sleepers will be provided by the department )

SABIR SHAH (BID ID -498243)

bharat singh (BID ID -498271)