Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹34.8 L+₹40,013.10 (1.16%)Rejected-Finance RZ 382 3RD FLOOR GALI NO 11B KAILASH PURI EXTN PALAM COLONY PALAM VILLAGE NEW DELHI 110045 | SOUTH WEST | DELHI | 110045 | L2 | Rejected-Finance BIDDER NOT LOWEST | |
| 3 | L3₹35.2 L+₹83,361.50 (2.42%)Rejected-Finance | L3 | Rejected-Finance BIDDER NOT LOWEST | |
| 4 | L4₹35.9 L+₹1.5 L (4.22%)Rejected-Finance PLOT NO 59 60 WAZIDPUR JAIMAU KANPUR 208010 | KANPUR NAGAR | UTTAR PRADESH | 208010 | L4 | Rejected-Finance BIDDER NOT LOWEST | |
| 5 | L5₹36.2 L+₹1.8 L (5.34%)Rejected-Finance | L5 | Rejected-Finance BIDDER NOT LOWEST |
Tender Value
₹32.6 L
EMD Value
₹65,200
Closing Date
15 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST DELHI CANTT 10
GE WEST DELHI CANTT 10
PROVISION OF CERTAIN SANCTIONED WORKS OF AGE BR I UNDER GE WEST DELHI CANTT 10
2022_MES_545590_1
GE/DW-67/2022-23
Open Tender
Civil Works
Item Rate
90 days
DELHI CANTT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE WEST DELHI CANTT
₹65,200
11 Oct 2022
20 Aug 2022
17 Sept 2022
22 Aug 2022
15 Sept 2022
3 Sept 2022
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in any type soil and removing debrish beyond MOD land complete all as specified and directed.
Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil and removing debrish beyond MOD land complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debrish beyond MOD land complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. removal of rubbish beyond MD land complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etcand Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.
Taking down chowkhats or frames with shutter (without taking off shutters from the frame) and removing complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down plaster any description on brick or stone walls and ceiling etc including raking out joints, hacking for key, scrubbing dwon with water etc removing the rubbish beyond MOD land complete all as specified and directed
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hold fast, foundation filling, coping, kerbs, moulding of edges of interlocking, complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for 40mm PCC 1:2:4 type B1 using 12.5mm graded stone aggregate as in sub base flooring/levelling course complete all as specified and directed.
M&L for brick work in cement morta 1:6 using sub class B bricks, straight or curved on plan exc 6mtr mean radius complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M&L for rendering 10-12mm thick in ready mix mortar on brick or concrete surface complete all as specified and directed.
M&L for 15mm thick cement mortar plaster on brick or concrete surface in other than fair faces in CM 1:6 finished even and smooth surface with out using extra cement on wall complete all as specified and directed.
M&L for Rough cast plaster, applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone of size between 6 to 12 mm mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete all as specified and directed .
M&L for Glazed ceramic coloured tiles in vertical surface, 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed/backing in CM 1:4 complete all as specified and directed.
M&L Non-skid coloured ceramic tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick screed beding/backing in CM 1:6 complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer of 20mm thick in cement mortar 1:6 for laying floor finishes complete complete all as specified and directed.
M&L for 20mm thick granite (any type) work (table rubbed and polished ) in steps, jambs, pillars, window cillss, cooking platforms and line in cement mortar 1:4 including pointing in white cement using marble dust admixture of pigment to match with shade of granite complete all as specified and directed.
M&L for preparation of steel based surface exc 10cm width or girth and applying two coat of syinthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L preparation of wooden surface exc 10cm width or girth and applying two coats of syinthetic enamel paint complete all as specified and directed.
M&L for preparation of wall surface by complete removal of existing treatment by mechanical means and applying two coat coats of white lime wash complete all as specified and directed.
M&L for preparation and applying three coats of white wash white or tinted complete on wall surface complete all as specified and directed.
M&L for preparation of old wall surface and applying one coat of white wash complete all as specified and directed.
M&L for Preparation of old ceiling surface and applying two coats of white lime wash complete all as specified and directed.
M&L for preparation of surface and applying two coat of white wash on wall surface complete all as specified and directed.
M&L for preparation of surface and applying two coat of white wash on ceiling surface complete all as specified and directed.
M&L for preparation of ceiling surface and applying one coat of white lime wash complete all as specified and directed.
M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement based paint white or tinted ,complete all as specified and directed .
M&L for preparation of old wall surface and applying one coat of cement base paint complete all as specified and directed.
M&L for Preparation of new rough cast plastered surfaces of wall and applying two coats of cement based paint white or tinted ,complete all as specified and directed .
M&L for preparation and applying two coats of OBD over one coat of primer including application of 1mm thick wall care complete all as specified and directed.
M&L for Cutting upto a depth of 10cm into concrete walls and trimming surface as required, girth exc. 30cm complete all as specified and directed.
M&L for mild steel work for brackets, cleats, support of cupboard, holdfast etccomplete all as specified and directed.
M&L for mild steel work with square/rectangular section in post, Roof trusses (framed), trussed, purlins, rafter, crane gantries, wind ties, rails and fastenings and heavy bracket, framing of tube sections including distance pieces, cleats, MS plates, nut & bolts etc.complete all as specified and directed.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed.
S&F 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
S&F Welded steel wire fabric complete to wood or steel members n.exc 4kg per sqm complete all as specified and directed.
M&L ornamental and intricate design Framed work as in doors or gates or grills of angle or other section with gusset plates, rails, braces, roller, guide etc., complete,. Gates, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings or all necessary roller, rails, guides etc reqd for sliding door; also fastening and fixing complete all as specified and directed.
M&L for solid WPC (Wood Polimer Composite) sheet 18mm thick (water proof and termite proof) prelaminated one side with decorative choice colour and other side balancing white as in cup board shutter. The sheet shall be finished all edges with 0.5mm beading/ lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacture's instruction, specification and as directed.
M&L for Machine pressed precast concrete prepolished interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 25mm thick sand bedding complete all as specified and directed.
S&F pre-painted galvatume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour as approved by GE having tensile strength of 550Mpa and zinc coating 150gsm as in roof covering, ridge, fixed with self tapping screws ccomplete all as specified and directed.
S&F Solid PVC Wall Lining/penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance of not exceeding 30cm centre to centre on verticl and at every end or joint of sheet in horizontal/vertical inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.
S&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/window or other frames/chowkats of size 45x70mm comprising of vergin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheet husk) and non toxic additive etc all as per SSR 2020 part 2 ser No 08100A. complete all as specified and directed
S&F Factory made single extruded WPC (W) solid decorative type flush door shutter of size 30mm thick comprising of vergin polymer of K value 58-60 (Suspension grade ), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additive etc all as per SSR 2020 part 2 ser No 08105C. complete all as specified and directed.
S&F repair 40 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished for almirah and cup board complete all as specified and directed.
S&F stainless steel butt hinge medium weight 100 mm size complete all as specified and directed.
S&F aluminium anodised barrel tower bolt 150 mm size of extruded section complete all as specified and directed.
S&F aluminium handles cast type anodised 150 mm size complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed..
M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections complete all as specified and directed.
M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections complete all as specified and directed.
M&L 25mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections complete all as specified and directed.
S&F Chromium plated brass long body bib tap fancy type 15 mm bore dia complete all as specified and directed.
S&F 15mm bore angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and directed.
S&F 15mm dia swan neck fancy type half turn pillar taps brass body with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and directed.
S&F fanct type brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S/F in repair viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests incl P or S Trap) (excluding flushing cistern & flush pipe) including connecting to trap and to flushing pipe, anti syphonage pipe etc complete including making good to surface complete all as specified and directed.
S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm including CI/MS brackets including cutting for and pinning in ends of brackets but including waste pipe complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron , white and connection with cistern complete all as specified and directed.
S&F in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.
S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour all as specified and directed.
S&F for Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F in repair rotational moulded polythelene water storage tank (cylindrical, vertical with closed top) 1000 ltrs capacity (ISI Marked) incl necessary fitting like tank cover, nipple, socket etc, hoisted and fixed in position complete all as spd & directed.
S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 40mm-690gms/) complete all as specified and directed.
S&F in repair 10 ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.
S&F Brash chromium plated bib tap long body half turn fancy type complete all as specified and directed.
S&F brass chromium plated anglular stop valve half turn fancy type complete all as specified and directed.
S&F in repair 100mm dia CI bends or diminishing pieces fixed to wall/floor complete all as specified and directed.
S&F in repair100mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall in repair complete all as specified and directed.
S&F 100mm bore CI vent cowl complete all as specified and directed
S&F 100mm bore CI tee, Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed
S&F for 100mm bore dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F for Brass chromium plated bottle traps 32/40mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.
Deduct Credit: for demolished/dismantled material of (-) Rs 15800.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum
A S CONSTRUCTION CO.
JAIPAL and BROS
B. S BUILDERS
M/S Ayub Khan
S GOURAV PRAKASH ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .