REPAIRS REPLACEMENT OF JOINERY DOORS WINDOWS VENTILATORS AND CONNECTED WORK IN N1 NAIR KULDEEP POWER HOUSE LAL SPORTS COMPLEX AND 3 ASC SWIMMING POOL AT AFS CHAKERI KANPUR

Amount

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Ditto all as per item No.1 here-in-before but exceeding 1.5 sqm and not exceeding 4 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified and directed.

Ditto all as per item No. 3 here-in-before but exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.

M & L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M & L for 35 mm thick factory made Second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with out sash bar any number fitted with cut and mitered beads for securing glass/ gauze etc , sizes of members of shutters as specified in SSR Part I section 8, clause 8.24(a) and fitted to chowkats complete all as specified and as directed.

Ditto all as per item No. 6 here-in-before but 30 mm thick for window, ventilators etc ,with edges of sash bars are provided with stiles and rails as specified in SSR part-I, section 8 clause 8.24(b) with rebeted sash bar etc complete all as specified and directed.

Ditto all as per item No. 7 here-in-before but 30 mm thick for window, ventilators etc are provided with stiles and rails as specified in SSR part-I, section 8 clause 8.24(b) without sash bars complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete, all as specified and directed.

Ditto all as per item No. 9 here-in-before but for 25 mm thick.

M&L 35mm thick 2nd class hard wood plain framed panelled shutter (any numbers of panels) with panels of timber flat o both sides (feather edged), or of veneered particle board medium density, wood partical board with commercial face venneers; supplied and fitted to chowkats complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick( stile), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, all as specified and as directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F PVC Butt hinges medium weight for fixing of PVC doors etc complete all as specified and directed.

S & F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

Ditto all as per Item No 16 here-in-before but for 200 mm long.

S & F 300 mm long aluminum anodized sliding door bolts with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F 125 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

Ditto all as per item No.19 here-in-before but 150 mm long.

S&F butt hinges medium weight cold rolled mild steel 100 mm long, complete all as specified and directed.

S&F Butt hinge medium weight cold rolled mild steel 75 mm long, complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Providing and fixing factory made uPVC white colour sliding windows, area nexc 2.00 Sqm each three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow sections with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (One vertical lenght in each shutters) (45m5 mm x 28 mm), glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minius mm thick galvanized steel frame (30 mm x 18 mm) 2 Nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasterners. Hardware : Touch lock of zinc alloyed (white powder coated), steel roller system, stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories) (Note : (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpuse (ii) Provision for AC opening to be provided in each window. (iii) A fixed glass to be provided in each opening for AC. ).

All as per item No 24 here-in-before but area exc 2.00 Sqm complete all as specified and directed.

Supply and fixing factory made uPVC any colour fixed/top hung glazed window/ventilators (One with glass shutter and another wire mesh shutter. Both shutter shluld be top hung made of (small series frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 plus minus 0.2 mm and single glazing bead of appropriate dimension (area up to 0.75 Sqm) comprising of uPVC multi-chamberedframe and mullion (where ever required) extruded profiles duly reinforced with 1.6 plus or minius 0.2 mm thick galvanized mild steel section made from roll forming, process of required length (shape and size accoring to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gazket, GI fasterners 100 x 8 mm size for fixing frame to finish wall, plastic packers, plastic caps and necessary stainless steel screws etc profile of frame shall be mitred cut and fusion welded at all corners, lussion (if required) shall be also fusion welded including drilleing of holes for fixing of hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with wather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. Note : (i) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile demension in higher side shall be accepted but no extra payment on this account shall be made. Hardware : Cost of Stainless wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories will be included in quoted rate and glass will be measured and paid seperately. Net opening will be measured for payment purpose).

Dismantling mild steel windows and ventilators of any description complete all as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, devetailed or welded complete all as specified.

All as per item No 28 above but without glazing bars complete.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

Easing of door shutters exc 1.0 Sqm but n.exc 2.0 sqm each for easy to closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc at any floor complete all as specified and directed.

Easing of window shutters n.exc 1.0 Sqm each kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repair 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.

Hacking out old broken glass (any thickness size quality or description) from wooden frames etc glazed with putty or fixed with beads, all as specified and as directed.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified and as directed.

S&F 5.50 mm thick ordinary glass n.exc 0.5 Sqm in each pane complete all as specified.

M&L for PCC (1:3:6) type C1 (using 20mm graded agg) for hold fasts finished to match with the surrounding surfaces including necessary form work complete all as specified and as directed.

M&L for Framed work as grills with end bars shoulders/framed guard bars and similar work conforming to Fe-410 or 310 complete all as specified and directed.

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, all as specified and as directed.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc., complete all as specified and directed.

M & L rendering (External) 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saperately as "supply only".)

Supply only water proofing compound complete all as specified and as directed.

M&L 10 mm thick rendering (Internal) in CM 1:4 on brick/concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty including maching with the existing surfaces, all as specified and directed.

M&L for preparation of surfaces and applying two coats of cement based paint over a coat of primer on walls complete all as specified and directed

S&F in repairs butt hinges medium weight cold rolled mild steel 100 mm long, complete all as specified and directed.

S&F in repairs Butt hinge medium weight cold rolled mild steel 75 mm long, complete all as specified and directed.

S&F in repairs aluminium anodized bow handle fabricated type, extruded section of 150mm long, complete all as specified and directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section 200 mm long complete all as specified and directed.

S&F in repair Aluminum anodized sliding door bolts of 300mm long with hasp and staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repairs mortice lock brass 4 levers vertical type, size 100mm, complete all as specified and directed.

S&F in repair 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed..

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Taking down aluminum shutters including repair for smooth functioning including repair/replacement of aluminum snap beading, glazing clips, rubber neoprene packing of any description n.exc 1 sqm each and refixing in same opening, all as specified and as directed.

All as per items 58 here-in-before, but exc 1 sqm and n.exc 2 sqm each complete.

Taking down rolling shutter of any size including covering guide, channel etc complete all as specified and directed.

S&F steel rolling shutter without ball bearing as specified including top cover, anchoring rod, hasp and staple and shop coat of primer, erected in position as indicated complete push pull or manual type, thickness of lath 1.25 mm, complete all as specified and directed.

Repair to existing rolling shutters of any thickness making functional of by repairing ball bearing, top cover, anchoring rod roller correcting/straitening of side guide rail etc with and including necessary repairing push, pull or manual type easing rails after greasing complete all as specified and directed Note: Spares such as ball bearings, springs etc will be measured and paid separately as supply only..

Supply only ball bearing for rolling shutter including taking out u/s ball bearing all as directed.

Supply only springs for rolling shutter including taking out u/s springs all as directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

S&F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as directed.

Taking down of MS gate of any description and refixing in same position/location after necessary repairs such as welding of any type of section, MS sheet, cutting of brick/concrete work including PCC type B-1, 1:2:4 (using 20 mm grades aggregate, complete all as specified and directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering complete all as specified and directed.

S&F 0.80 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L- type or J type hook bolts complete all as specified and directed.

All as per item No 71 above but except sheeting.

S&F in repairs fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with coach screw and washer in roof, wall etc, all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

Dismantling timber scantling 40 sq cm and over as in unframe work in any section in any position.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410 W(Gde -250) quality B complete all as specified & directed.

M&L preparation of new surfaces of steel and iron of any description over 10cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

S&F in repairs steel window handles fixed with nuts & bolts, screw or welded complete all as specified and directed.

S&F in repairs steel window peg stay with nuts & bolts, screw or welded complete all as specified and directed.

S&F 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or brads, sectional area exc 3 & n.exc 6 sqcm, all as specified and directed.

S&F 2nd class HW plain fillets, square, rectangular in section, clean sawn, secured with nails or brads, sectional area exc 13 & n.exc 25 sqcm, all as specified and directed.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

Providing & Fixing of false ceiling at all heights with GRC (Glass Fibre Reinforced Gypsum ) false ceiling tiles of Size 595mm X 595mm of apporved texture design and pattern having moisture content less than 2% humidity resisitnace of 99% NRCO 50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (Part-4) -1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T- Grid of hot dipped galvanized iron section of 0.33mm thick galvanized @ 120grams per sqm including both sides ) comprising of main T runners of size 15mm X 32mm of lenght 1200mm and secondary intemediate cross -T of size 15X 32mm of length 600mm to form grid module of size 600x 600mm suspended from ceiling using galvanized mild steel items galvanizing @ 80 grams per sqm ) i.e 50mm long 8mm outer diameter M-6 dash fasterners , 6mm dia fully threaded hanfger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall /partion with the help of plastic rawl plugs at 450mm centre centre and 40mm long dry wall wood screws . The work shall be carried out as per specificatuions and drawing and as per directions of Engineer -in- Charge

S & F in repairs 18 mm thick 100% Lead free both side plain laminated PVC/WPC sheet of any colour with using sunmica of choice colour on both side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacterer’s instruction and make approved by GE complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges etc for shutter should be included rated quoated by the contractor.

Supply and fixing in repairs kitchen cabinet shutter frame made of solid UPVC foan profile with homogenious fine cellular structure having smooth out integral skin having 45 mm width and 20 mm thickness as vertical and horizontal stiles, joints are made and shall be fixed to walls using rquired sizes sheet metal screwes and solvent adhesive vertica and horizontal partition made of UPVC profile frame of size 35 mm x 17 mm. The panel shall be fitted with plank profile of size 250 mm width and 6 mm thick complete all as manufacturers' literature including taking down complete all as directed

S&F in repairs rubber beading 75mm wide fixing with nail/screw, complete all as specified and directed.

M&L Running welding n.exc 6mm thick in repairs in steel works thickness of metal to be welded not exc 6mm and complete all as specified and directed

M&L in repairs for 18/19mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work for cupboards shelves and other similar work complete all as directed.

M&L for pelmet box made out of 19mm thick particle board medium density flat pressed decorated type of width exceeding 200mm but not exceeding 300mm including fixing with necessary cleats and other jointing materials including taking down old one complete all as specified and direted

M/S ASM ENTERPRISES (BID ID -3464684)

SHRI SHAYAM KRIPA (BID ID -3465738)