REPAIR OR REPLACEMENT OF STREET LIGHT, SECURITY LIGHT,

Amount

Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 mtr in depth and getting out soft/loose soil complete all as specified.

Returning filling in soft/loose soil, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 metre and deposited where directed at a level not exceeding 1.50 metre above the starting point all as specified.

Supply and filling for dry sand in cable protection trenches before and after the cables are laid, for sand cushioning to cables complete all as specified and directed. NOTE : thickness after punning of sand shall be (minimum as specified in SSR) measured and paid in this item.

Material and labour for brick protection for UG XLPE cable with burnt clay old size sub class 'B' bricks laid dry and flat abutting each other with gaps between adjacent brick not more than 10mm and width equal to length of brick in trenches across the cable complete all as directed by Engineer-In-Charge. Make: Best quality locally available which is duly approved by GE.

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 25 Sqmm 4.0 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Gloster (ISI Marked)/ KEI (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 16 Sqmm 4.0 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Gloster (ISI Marked)/ KEI (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately

Supply and laying, connecting, testing, commissioning LT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 1100 Volts grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 10 Sqmm 4.0 Core laid in trenches / ducts/ inside protection pipeincluding cable glands, lugs and suitable size of MS saddle clips etc. all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Gloster (ISI Marked)/ KEI (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks shall be measured and paid separately

Material and labour for PVC insulated FRLSH industrial cable with multi stranded copper conductor 2.5 sqmm 3 core, 1100 volts including taking out old cable as directed by Engineer-In-Charge. Make : Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Nicco (ISI Marked)/ KEI (ISI Marked)

Supply, lay and fix 40 mm bore galvanized iron tubing (light grade) including all fittings and laid in trenches, walls and ceilings or laid in floors complete all as specified and directed. Make:- Jindal/ TATA/ Prakash Note: Excavation shall be measured and paid in separate item

Supply and fixing in replacement GI bracket for street light made out of 32mm dia GI pipe medium grade 1.5 mtr length bend in shape as required complete with MS flat iron clamp,nuts and bolts etccomplete including Taking down existing as specified and as directed Make:- Jindal/ TATA/ Prakash

Supply and fix as in replacement 25 W LED street light made up of pressure die cast aluminium housing with high efficient LED with driver IP 65 luminiares comprising of high brightness LEDs and all accessores complete all as specifed and directed. Make:-Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 45 W LED street light made up of pressure die cast aluminium housing with high efficient LED with driver IP 65 luminiares comprising of high brightness LEDs and all accessores complete all as specifed and directed. Make:-Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 60 W LED street light made up of pressure die cast aluminium housing with high efficient LED with driver IP 65 luminiares comprising of high brightness LEDs and all accessores complete all as specifed and directed. Make:-Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 70 W LED street light made up of pressure die cast aluminium housing with high efficient LED with driver IP 65 luminiares comprising of high brightness LEDs and all accessores complete all as specifed and directed. Make:-Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 90 W LED street light made up of pressure die cast aluminium housing with high efficient LED with driver IP 65 luminiares comprising of high brightness LEDs and all accessores complete all as specifed and directed. Make:-Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 80 W LED flood light made up of pressure die cast aluminium housing with high efficient LED with driver IP 65 luminiares application with SMD LEDs as light source with driver included, suitable for highlighting architectural features or area lighting. Also suitable to rough services/installations. complete all as specifed and directed. Make:-Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in replacement 150 W LED flood light made up of pressure die cast aluminium housing with high efficient LED with driver IP 65 luminiares application with SMD LEDs as light source with driver included, suitable for highlighting architectural features or area lighting. Also suitable to rough services/installations. complete all as specifed and directed. Make:-Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix in replacement LED Post top lantern of 40 Watts, 240V, 50Hz with clear acrylic for 360° indirect light with IP 65 protection resistant to impact and corrosion made of black ABS plastic spigot, and accessories such as integrated drivers pre-wired etc suitable with gate light pipe. Make: Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings to the Engineer-In-Charge. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs to the Engineer-In-Charge. (c) LED light fitting and drivers shall be of same make.

Supply and fix as in repairs weather proof SMC junction box of size 300 mm x 200 mm x 105 mm with terminals / connectors, mounting bracket & polyamide cable gland with lock nut & bolts including internal connections with proper size Copper/ Aluminum lugs/ thimbles including fixing on pole with clamps and also drilling of two holes on pole for inserting PVC insulated copper cable complete all as directed. Make: Hensel/ C&S Electrical/ Sintex

Supply and fix as in repair MCB SPN 240 volts, 50 Hz capacity 6-32 Amps 'C' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fixing in replacement Astronomical Street Light time Switch alongwith suitable Power Contactor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) conforming to IP54.The Contactor, MCB and Circuit Wiring should suitable enough to take load of 12 kW load equally distributed over 3-phase .Contactor Rating: 40.Amps (4-pole).MCB (4-pole) Rating: 40.Amps (3 nos.) Make : Hager/ Siemens/ Schneider etc.

Supply and fixing as in replacement 4 Pole Power Contactors conforming to IS / IEC 60947-4-1 & IEC 60947-4-1 for 60A current rating complete as per manufacturer instruction. Make:- ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Material and labour for preparation of old distempered / white wash / painted RCC Poles upto 11/9 mtrs height of street light poles above ground level incl coping with two coat of existing or as directed distemper including two coat of aluminium paint over iron surfaces such as cross arms, channels, Flat iron clamp, nuts, bolts, washers etc in LT OH line including writing pole numbers with black paint all as specified and directed by Engineer-in-Charge.

Taking down water storage heater (Geysers) of capacities 25 Ltr/35 Ltr/50 Ltr from existing position by disconnecting inlet and outlet pipes, vent pipe, electrical connection, bringing the Geyser to AGE E/M Storeyard at Shillong, dismantling Geyser for repairs, descaling/cleaning of inner tank vessel by coir/steel brushes, cleaning of all accessories, checking for its functionality, carrying out repairs/replacement of unserviceable components, re-assembling of all parts/components (new or old serviceable) and re-installing at existing/new location as directed, making inlet and outlet pipes connections, vent pipe connection, electrical connection including replacement and grouting of nuts and bolts, washers, clamps etc and provision of PVC insulated & PVC Round Sheathed 3 core 4.0 Sqmm multistranded copper conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 for connecting Geyser to switch board in required length and testing complete all as specified and directed. Notes : (a) Cost of labour for replacement of new component in above Geysers shall be deemed to be included in quoted rates. (b) New spare parts/components shall be measured and paid as Supply only under respective items of BOQ here-in-after. (c) All cleaning operation and testing is to be carried out in AGE E/M Storeyard at Shillong, in presence of Engineer-in-Charge/Rep of Engineer-in-Charge.

Supply only for the following parts:- Make: Bajaj/ Recold/ Venus/ Universal/ Remson

1.5 KW wattage heating element with rubber gasket round/triangular type for water storage heater (Geysers)

2.0 KW wattage heating element with rubber gasket round/triangular type for water storage heater (Geysers)

Thermostat

Indicating lamp red/green square/round shape.

Copper tank 25 ltr

Copper tank 35 ltr

Copper tank 50 ltr

Apparatus plate assembly for horizontal/vertical type water storage heater (Geysers) with gasket for 25 ltr geyser

Apparatus plate assembly for horizontal/vertical type water storage heater (Geysers) with gasket for 35 ltr geyser

Apparatus plate assembly for horizontal/vertical type water storage heater (Geysers) with gasket for 50 ltr geyser

Fusible plug for horizontal/vertical type water storage heater (Geysers) of capacities 25 Ltr/35 Ltr/50 Ltr

Glass wool

Supply and fix in replacement 450 mm long CP brass connection pipe with CP brass nuts on both ends for fixing to pipe or other fittings complete all as specified and directed. Make: Jaquar/ Parryware/ Prayag/ Johnshon/ Hindware

Supply and fix in replacement 15mm bore bib tap cast copper alloy fancy type chromium plated long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: Jaquar/ Parryware/ Prayag/ Johnshon/ Hindware

Supply and fixing sub-main wiring with PVC insulated & unsheathed two run of 4.00 Sqmm single core multistrand copper conductor cable (FRLSH), 1100 Volt grade alongwith single run of 4.00 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH) 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through minimum 25 mm PVC conduit including taking down existing wiring complete all as specified and directed. Note:- (a) PVC conduit in concealed including accessories shall be measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate. (d) Rate shall be included for cutting, pinning in, making good to facings where required for pointing in cement mortar 1:3 and cutting chases for concealed conduit wiring and making good, and cutting not exceeding 10 cm girth. Make:Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

Supply and fix as in repairs Switch piano, flush type single pole one way 16 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix Single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 V. Make:L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Material and labour for complete removal of old paint from water storage heater of capacity 25/35/50 ltr and applying two or more coats of synthetic enamel paint and a coat of red oxide primer and after completing the work the geyser shall be reinstall as per direction by the Engineer-In-charge at any place. Make of Synthetic enamel paint: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

Taking down carefully existing exhaust fan of any size/sweep/make from it's existing position, dismantling the fan including preventive maintenance by servicing, greasing, oiling, cleaning external surfaces porperly and replacement of defective spare parts and re-assembling and refixing/hanging in the same position connecting with flexiable cable including testing complete all as specfied and as directed. Note : (a) Cost of spare parts and flexible connection wire as required will be measured and paid separately under respective items of this Schedule as "Supply only". (b) Rate of split pin, nut bolt, rubber grip and screw/washer, for fixing the blade shall be included in the quated rate.

Material and labour for Opening Stator of exhaust Fan of 200 mm Sweep Cleaning of Parts, replacement of Unserviceable Parts as ordered, Greasing of Moveable Parts, Taking out burnt Coil, Cleaning the Segments complete and Re-winding the Same with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, Re-assemble the same after repaired and Testing, complete all as specified and as directed .

Material and labour for Opening Stator of exhaust Fan of 300 mm Sweep Cleaning of Parts, replacement of Unserviceable Parts as ordered, Greasing of Moveable Parts, Taking out burnt Coil, Cleaning the Segments complete and Re-winding the Same with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, Re-assemble the same after repaired and Testing, complete all as specified and as directed .

Material and labour for Opening Stator of exhaust Fan of 450 mm Sweep Cleaning of Parts, replacement of Unserviceable Parts as ordered, Greasing of Moveable Parts, Taking out burnt Coil, Cleaning the Segments complete and Re-winding the Same with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, Re-assemble the same after repaired and Testing, complete all as specified and as directed .

Supply only ball bearing suitable for exhaust fan of upto 200 mm sweep complete all as specfied and as directed. Make : TATA/SKF/NBC.

Supply only ball bearing suitable for exhaust fan of upto 300 mm sweep complete all as specfied and as directed. Make : TATA/SKF/NBC.

Supply only ball bearing suitable for exhaust fan of upto 450 mm sweep complete all as specfied and as directed. Make : TATA/SKF/NBC.

Material and labour for replacement of fan capacitor 2.5 Mfd capacity including taking out old burnt capacitor. Make: Universal/usha/Bajaj/Havells

Material and labour for replacement of fan capacitor 3.5 Mfd capacity including taking out old burnt capacitor. Make: Universal/usha/Bajaj/Havells

Supply only gun metal bush suitable for any type and any sweep of wall fan/exhaust fan complete all as specfied and as directed.

Supply and fix as in replacement exhaust fan 300 mm sweep PVC body including necessary electric connection with louver complete all as specified Make :USHA (ISI Marked) /Bajaj (ISI Marked) / Crompton (ISI Marked) /Havells (ISI Marked)/ Orient (ISI Marked)

Supply and fix as in replacement exhaust fan 450 mm sweep steel body including necessary electric connection complete all as specified Make :USHA (ISI Marked) /Bajaj (ISI Marked) / Crompton (ISI Marked) /Havells (ISI Marked)/ Orient (ISI Marked)

Material and labour for single coat painting to exhaust fan/ wall fan upto 450 mm sweep with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking the MES Fan Nos and re-writing MES fan serial number complete all as specfied and as directed. Make of Synthetic enamel paint: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

Supply and fix aluminium louvers for exhaust fan, wall mount type, 4/6 Amps, round/ rectangular shape suitable for 200 mm sweep Make: Bajaj/ Recold/ Venus/ Universal/ Remson

Supply and fix aluminium louvers for exhaust fan, wall mount type, 4/6 Amps, round/ rectangular shape suitable for 300 mm sweep Make: Bajaj/ Recold/ Venus/ Universal/ Remson

Supply and fix aluminium louvers for exhaust fan, wall mount type, 4/6 Amps, round/ rectangular shape suitable for 450 mm sweep Make: Bajaj/ Recold/ Venus/ Universal/ Remson

Taking down Ceiling Fan of any Sweep and Make by disconnecting Electric Connection, dismantling Blades, Down Rod and removing Ceiling Fan to MES STORE YARD OF AGE E/M (AF) SHILLONG (at Laitkor Peak) for Check-ing, complete including Hanging of Ceiling Fan in same position after repair and assemble of parts, connecting up with and including of Flexible Copper 3 Core Wire of 1.5 Sqmm, from Ceiling Rose/Connector to Fan, complete all as specified and as directed.

Material and labour for Opening Stator of Ceiling Fan of any Sweep Cleaning of Parts, replacement of Unserviceable Parts as ordered, Greasing of Moveable Parts, Taking out burnt Coil, Cleaning the Segments complete and Re-winding the Same with Supper Enameled Copper Wire of same Gauge and same Weight with Insulation Paper, Varnishing and Heating, Re-assemble the same after repaired and Testing, complete all as specified and as directed .

Supply only ball bearing suitable for ceiling fan of upto 1400 mm sweep complete all as specfied and as directed. Make : TATA/SKF/NBC.

Supply only gun metal bush suitable for any type and any sweep of ceiling fan complete all as specfied and as directed. Make : TATA/SKF/NBC.

Material and labour for single coat painting to ceiling fan upto 1400 mm sweep after dismantling blades, with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking MES fan serial Nos, refixing the blades and re-writing MES Fan serial number complete all as specfied and as directed. Make of Synthetic enamel paint: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

M/S DEEDAR ENTERPRISE

M/s Gupta Construction

madan enterprise

M/S RAGHU NATH SAH

S K ENTERPRISE

M/S BISWA CONSTRUCTION