Delhi

Financial BO

Works

Civil Works

Providing and Fixing Noise Barrier at New RTR Flyover on Outer Ring Road (Road ID 347), during 2026-27 under PWD Division South West Road-I under Sub Division-I, New Delhi.

Public Works Department

New Delhi, Delhi

Amount: ₹4.2 CrCloses: 6 May 2026Closed

Bids

Percentage

6 Bids16 May 2026

#	Company	Quoted %	Amount	Rank	Status
1	L1₹3.8 CrAdmitted-Finance	-10.00%	₹3.8 Cr	L1	Admitted-Finance
2	L2₹4.2 CrAdmitted-Finance 38 ASOLA FATEHPUR BERI NEW DELHI 110074 \| SOUTH \| DELHI \| 110074	-1.11%	₹4.2 Cr	L2	Admitted-Finance
3	Not Admitted-Fee/PreQual/Technical	-	-	-	Not Admitted-Fee/PreQual/Technical Not Complied with technical specification
4	Not Admitted-Fee/PreQual/Technical	-	-	-	Not Admitted-Fee/PreQual/Technical Not Complied with technical specification
5	Not Admitted-Fee/PreQual/Technical	-	-	-	Not Admitted-Fee/PreQual/Technical Not Complied with technical specification

Tender Value

₹4.2 Cr

EMD Value

₹8.4 L

Closing Date

6 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer, PWD Divn. M-113N New Delhi-10

Address

Executive Engineer, PWD Divn. M-113N New Delhi-10

Work Description

Providing and Fixing Noise Barrier at New RTR Flyover on Outer Ring Road (Road ID 347), during 2026-27 under PWD Division South West Road-I under Sub Division-I, New Delhi.

Tender Information

Tender ID

2026_PWD_290512_1

Reference Number

05/SE/South west circle/PWD/26-27, 06/EE/PWD/SWR-1/2026-27

Tender Type

Open Tender

Product Category

Civil Works

Period of Work

90 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

Required(i) Earnest Money in the form of Insurance Surety Bonds, Account Payee Demand Draft, Fixed Deposit (.pdf)

Required(ii) Valid contractors registration enlistment order (for enlisted CPWD contractors only) (.pdf)

Required(iii) Certificate of Financial Turnover from CA as per Form-A. (For Non CPWD Contractors only). (.pdf)

Required(iv) Bankers certificate or Net Worth Certificate as per Form B or B 1. For Non CPWD contrac (.pdf)

Required(v) Certificates of Work Experience and performance as per Form-C and D (For Non CPWD (.pdf)

Required(vi) Affidavit on Non-Judicial Stamp Paper of Rs. 100/-regarding debarment and blacklisting as per.. (.pdf)

Required(vii) Affidavit on Non Judicial Stamp Paper of Rs. 100/- regarding back-to-back execution as per.... (.pdf)

Required(viii) The Copy of GST Registration Certificate of the State in which the work is to be taken up (.pdf)

Required(ix) Copy of PAN Card issued by Income Tax Department. (.pdf)

Required(x) Bidders are required to upload the NIT in PDF as uploaded by EE. This will satisfy digital (.pdf)

Required(xi) The agency have to upload details such as Proprietor name, Mob No., e-Mail ID, (.pdf)

Finance

Requiredboq (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹8.4 L

Important Dates

Last Activity

16 May 2026

Published

28 Apr 2026

Bid Opening

6 May 2026

Download Starts

28 Apr 2026

Download Ends

6 May 2026

Submission Starts

28 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	-	Kg	1	-
2Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
2.1	Hot finished welded type tubes.	0.29	Kg	-	-
3Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm² ), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge.
3.1	10 x 140 mm	-	each	1	-
4Providing and fixing multi walled transparent /opaque 10 mm thick polycarbonate sheet of required colour blue, brown or green etc. UV co-extruded and having UV coating on one side multi walled sheet of weight not less than 1.60 to 2.05kg/sqm as approved by Engineer-in-charge. The light transmission from transparent or translucent or opaque polycarbonate sheet varies from 30 to 80% and shall be decided by engineer in charge as per requirement. The panel shall satisfy the Dart drop impact test for value above 15 and upto 60 Joules and confirm either flame retardancy of class UL-94HB/94V-0 category as per IS-14434:2023 or category V0 & HB as per ASTM D635-18 or BSID0 classification as per EN13501 for fire safety. The yellowness index tested as per ASTM E313 (D1925) shall be less than or equal to 2 or it shall be I units as per ASTM D 2244 at the time of installation and shall be less than or equal to 10 as per ASTM E313 (D 1925) or 6 units as per ASTM D 2244 on a sample after 5000 Hours of exposure of UV / sun light. The multi walled poly carbonate sheet shall be fixed on tubular steel structure with aluminium Alcox section of size 60x18x2 mm (anodized 25 micron thick) and weight not less than 0.462 kg/metre. Weather proof Neoprene/ EPDM rubber gasket shall be fixed on both side of joints to make the whole structure water tight as per approved design/drawings. The aluminium section shall be fixed on Joints at both sides (top & bottom) of polycarbonate sheet to hold the sheets rigidly together. The weather proof neoprene gasket and aluminium profile shall be fixed and sealed with silicon sealant to make the Joints fully water proof. The open overhead ends of polycarbonate sheet to be sealed with anodised aluminium U Profile/ channel of size 10x10x 1.5 mm thick of weight not less than 0.2kg/m. The polycarbonate sheet and aluminium profile shall be fixed to MS Framed Structure with self-taping and self-drilling 55mm long steel screws to be fixed @ 300mm centre to centre. The rate shall be inclusive of cost of all material involved such as polycarbonate sheet, aluminium profile and aluminium channel, EPDM gasket, Self-taping screws. nut bolts, Silicon sealant or any other material required for fixing the sheet but excluding the cost of steel structure which shall be paid separately including hoisting the sheets and fixing in position in required scaffolding shape. The rate shall also include the cost of all T & P scaffolding and safety precautions required during execution of the work. The entire work shall be executed as per direction of Engineer-in-charge.
4.1	10 mm thick and U value not more than 2 50 W/m2K	-	Sqm	-	-
5Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications excluding appropriate priming coat, preparation of surface, etc. complete.
5.1	On steel work	-	Sqm	1	-
5.2	Less Cost Index @0.09% on DSR items	1	Nos	0.96	₹0.96

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 4.50 MB

Work Item Documents

nit06se05.pdf

Tender Documents • 4.48 MB

BOQ_385567.xls

BOQ • 0.24 MB

Ready to Participate?

Download all tender documents and submit your bid