ADDITION/ALTERATION CUM SPECIAL REPAIR TO MARRIED ACCN OF OFFRS, JCOs/OR AT FATEHGARH CANTT.

Amount

Excavating in trenches in soft/loose soil n.exc. 1.5m wide and n.exc. 1.5 m depth for foundation etc & getting out complete all as specified and directed.

Demolition reinforced cement concrete in any description and in any position complete all as specified and directed.

Demolition cement concrete in any description and in any position complete all as specified and directed.

M & L for Cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in bed of manholes/pipes complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping & benching complete all as specified and directed.

M & L brick work with sub class 'B' bricks old size in cement mortar 1:4 straight or curved on plan as in manholes complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brickwork in cement mortar 1:4 finished even and smooth without using extra cement and neeru finished complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipes 150mm dia (internal) after these are laid in trenches complete all as specified and directed.

Demolition and breaking up drain pipes 150 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

M & L 150mm dia (internal) reinforced concrete pipes class NP-3 laid and jointed complete with collars complete all as specified and directed.

Returning filling including spreading, leveling, watering and well ramming in layers n.exc. 25cm for soft/loose soil complete all as specified and directed.

Removing excavated materials (soil) not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L precast cement concrete type B-1, 1:2:4 set in cement mortar 1:6 in, cover slabs over man holes complete all as specified and directed.

M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M&L for Extra for forming fair finshed drain or channel 30 cm inner girth in cement concrete, using extra cement , including forms , moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150 mm bore pipe complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes 100/50mm, jointed in cement mortar and taking out of from wall/floors complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe of bore 100mm sand cast in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe of bore 100mm sand cast in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe of bore 50mm sand cast in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

S&F Cast iron bends (any radius) 100mm bore with oval access door fixed with cement joints complete all as specified and directed.

S&F Cast iron plain bends (any radius) 100 mm bore fixed with cement joints complete all as specified and directed.

S&F 100 Cast Iron bends (any radius) ducks foot rest or heal rest complete all as specified and directed.

S&F Cast iron 'P' or S trap trap with 100 mm dia out let with stainless steel grating including jointing to waste pipe in run lead complete all as specified and directed.

S&F 100 mm dia diminishing pieces or tapers (larger bore measured) including jointing to waste pipe in run lead complete all as specified and directed.

S&F CI branch pieces single (equal or unequal)(Tee-section) ordinary or inverted fitted with oval access door of size 100mm including jointing to waste pipe in run lead complete all as specified and directed.

S&F CI branch pieces single (equal or unequal) ordinary or inverted of size 100mm including jointing to waste pipe in run lead complete all as specified and directed.

S&F 100 mm dia CI branch piece double(equal or unequal) (Cross) ordinary or inverted fitted with oval access door including jointing to waste pipe in run lead complete all as specified and directed.

S&F Sockets double coller 100 mm complete including jointing to waste pipe in run lead all as specified and directed.

S&F Cast iron cowls 50 mm complete all as specified and directed.

S&F clamps for CI/PVC pipe 100 mm dia made out of flat iron 25 mm x 3 mm fixed to wall by means of stainless steel fastener of size 10 mm x 72mm (2 Nos for each clamp) complete all as specified and directed.

S&F clamps for CI/PVC pipe 50 mm dia made out of flat iron 25mmx3mm fixed to wall by means of stainless steel fastener of size 10 mm x 72 mm (2 Nos for each clamp) complete all as specified and directed.

S&F Salt-glazed stoneware gully traps type S, square or round mouthed size 150 mm x 150 mm complete all as specified and directed.

Dismantling water tanks exc 250 litres & n exc 500 litres complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight -210 gms) complete all as specified and directed.

S&F in repair Vitreous China Wash Basin, white, flat back, size 550 mm x 400 mm including brackets and fixing with fasteners as per manufacturer’s instruction, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed

S&F in repair Vitreous China Wash down water closet semi-pedestal pattern (anglo indian type) white with plastic seat cover including Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook complete all as specified and as directed .

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including all fittings complete all as specified and as directed .

S&F in repair Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity white, with inlet, ball float and handle including brackets complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 15mm bore and connections etc complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 20 mm bore and connections etc complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm bore galavanised with all fitting fixed to walls, ceiling or laid in floors etc complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 20 mm bore galavanised with all fitting fixed to walls, ceiling or laid in floors etc complete all as specified and directed.

Cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repair 15mm bore copper alloy chromium plated Bib taps fancy type screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Confirming to CAT part No. 7406 of Prayag, CAT part No. F 440003 of Hindware, CAT part No. F1016151 of CERA or equivalent of other specified make

S&F in repair 15 mm bore copper alloy chromium plated Stop valves with long shank and cup(concealed type) fancy type screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.Confirming to CAT part No. 7418 of Prayag, CAT part No. QT F2006351(Expose Part) and F4050102 (concealed part) of CERA, CAT part No. F200007 of Hindware or equivalent of other specified make.

S&F in repair 15 mm bore copper alloy chromium plated angle valve fancy type,screwed for iron pipe or for unions and fixed complete all as specified and directed. (Confirming of CAT part No. 7210 of Prayag, CAT part No. F101820 of CERA, CAT part No. F860007 of Hindware or equivalent of other specified make.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125mm size with shower arm complete all as specified an directed.

S & F in repair Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, Bracket made of Angle iron 35 mm x 35 mm x 5 mm and length 450 mm (2 Nos per Sink) including fixing in PCC(1:3:6) type C-1 using stone aggregate connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x160 mm complete all as specified and directed.

S&F in repair utencil plate rack 1 mm thick of size 60 cm x 60 cm x 25 cm depth , of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs, complete all as specified and directed.

S&F in repair PTMT grating 100mm dia with or without waste hole etc complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm bore (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with old clamps complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed.

S&F 100mm nominal bore GI pipe medium grade as in spouts fixed to parapet walls on roof terrace,incl setting and fixing in cement concrete 1:2:4 and making necessary repairs etc incl removing old pipe complete all as specified and directed.

S & F tubular towel rail 20mm dia 60 cm long between flange, brass chromium plated including bracket fixed in repairs complete all as specified and directed.Confirming of CAT part No. BA-40 of Prayag, CAT part No. F890011 of Hindware, CAT part No. F5002103 of CERA or equivalent of other specfied make.

S & F in repair Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed.

S&F Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of Flat Iron 25 mm x3 mm made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed. Note : Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of flat iron 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of Flat Iron 25 mm x 3 mm made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F Steel ventilator fixed type (partly glazed and gauzed) made out of 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated consisting One No sash bar of T- Section 20mm x 3mm complete welded to frame including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 using stone aggregate Four Nos for each ventilator including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of Flat Iron 25mm x 3 mm made to shape– 04 Nos per ventilator complete all as specified. Note: Wire mesh/Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

M & L for framed work such as guard bars /grills made of square bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165 complete all as specified and directed.

S&F Built in mild steel Cupboard (shutter and frame) of pressed steel frame of size 75mm x45mm x1.25 mm thick with pressed steel shutter 1.00mm thick Godrej Pattern fixed to masonary walls by hold fast made out of 25 x 3 mm FI embeded in PCC 1 :2 : 4 type B1 complete, incl two coats of spray painting over a coat of red oxide primer on steel surfaces,including hinges,handle/lock godrej pattern, complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60 mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 mm x 8 mm sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed.(Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold fast doors properly for a long life.

S&FFactory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffener& supplying & fixing in frame at site complete all as specified ,shown on drawing and directed.

S&F Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F factory made 32 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made 35 mm thick 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wooden beads to steel windows/wooden doors complete all as specified and directed.

S&F 300 mm long ordinary helical door spring , fixed to doors chowkhats with screws/welding complete all as specified and directed.

M&L Cement concrete type C1 1:3:6 (20 mm graded stone aggreagte) as in filling inside pressed steel chowkhats complete all as specified and directed.

S&F MS work as in Framed work as in chowkhats of doors or gates of angle or other section with gusset plates, rails, braces, etc.,conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Framed work such as in barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F for framed work for portions framed and hung as gates,including hinges,stops,hand-made sliding bolts etc. conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F Expanded metal of weight less then 4.00 kg/Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

M&L Preparing surfaces new of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

All as per item No 88 above , but over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L preparing surfaces new of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roofs complete all as specified and directed.

Demolition mud in roofs any thickness including and leeping (whether full thickness removed or only a part thereof) including tarfelt etc and removing debris by any means out side of defence land complete all as specified and directed.

Preparation of old roof surfaces by brooming and watering, clearing all dust paricles and providing PCC type C-1 1:3:6 using 20 mm graded stone aggreagte as in padding/levelling course of average thickness not exceding 50 mm including making kerbs at wall and roof junction complete all specified ad as directed

M & L water proofing treatment on existing roof with the following speification complete (a) preparation of surface and M&L 10 mm thick (average) plaster on roof in cement mortar (1:4) with water proofing compound as per manufacturer instruction. (b) Apply bituminous primer @ 0.5 Ltr/Sqm confirming to IS 3384-1965 on prepared surface till the surface is properly pregnated (c) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (d) Laying App based polimeric water proofing membrane minimum weight not less than 3.0 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (Wt not less than 150 gms/sqm) laid on primed surface by forced application complete with as per manufacturer instructions confirming to IS complete all as specified and directed.

M & L for 40 mm thick brick tiles laid over 15 mm thick bedding layer of cement mortar (1:6) and joints grouted flush in CM (1:3) mixed with crude oil @ 5% by weight of cement complete all as specified and directed.

All as item No 95 above but except tiles complete all as specified and directed.

Supply only WPC complete all as specified and directed.

Taking down cement plaster on brick wall or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc and disposed off unserviceable material of out side MD land complete all as specified and directed.

Demolition of brickwork masonary built in lime or cement mortar including all quins arches, pillars etc. but including concrete articles complete all as specified and directed.

M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 100 above but except Bricks etc complete all as specified and directed.

M&L half brick thick walls built in cement mortar 1:4 Sub Class B bricks straight or curved on plan to any radius complete all as specified and directed.

M & L Rendering 15 mm thick in cement mortar (1:6) on faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L Rendering 5mm thick in cement mortar (1:3) on ceilling surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of chalk whitening complete complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls by rubbing down and making surface smooth and applying two coats of OBD complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls by rubbing down and making surface smooth and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling by rubbing down and making surface smooth and applying two coats of white wash complete all as specified and directed.

Dismantling of existing sunken treatment including plaster and M&L for water proofing treatment on existing sunken floor/wall with the following specification complete all as specified and directed- (a) 15mm thick (average) plaster in CM 1:3 on sunken floors and walls using WPC in as per manufacturer instruction (b) Apply one coat bituminous primer @ 0.5 Kg/ Sqm on walls and floor conforming to IS 3384-1965 on prepared surface till the surface is properly impregnated (c) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (d) Laying polymeric water proofing memberance weight not less than 3.0 Kgs/Sqm as per manufacturer instructions confirming to IS (e) One spout of 40mm GI pipe length 0.45 M shall be provided in sunken floor (f) Filling of sunken floor with PCC 1:5:10 upto height directed (g) fixing of trap as per site requirement

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350 mm x 250 mm x 7 mm / 450 mm X 350 mm X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M & L for machine cut kota stone slab as a single piece in stair case trades flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for machine cut kota stone slab as a single piece in stair case riser and skrting/dado 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick screed bed/rendering of cement mortar (1:4) complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

M & L for providing prepolished chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete all as specified and directed.

M& L 75mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregates as in plinth protection and finishing even & fair without using extra cement laid in bays and filling the joint with mixture of sand and bitumen in (1:1) complete all as specified and directed.

M&L Cement concrete type E2, 1:5:10 using 40 mm graded stone aggregates as in foundations, filling and mass concrete complete all as specified and directed.

MS work 0.63 mm Mild steel, plain, black sheet as in steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

MS work as in Framed work as in Framed work as in doors or gates of angle or other sectionwith gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W(Gde E- 250) quality A complete all as specified and directed.

S&F for Purpose made butt hinges,sliding bolt,handle conforming to Fe-290 Gde-E-165 suitable for fixing to stone/concrete with door and window frames complete all as specified and directed.

S&F in repair for 20mm dia Harrison rails(Curtain Rail), mild steel, CP with fixing brackets, stops ,rollers etc. complete all as specified and directed.

Dismantling water tanks exc 500 & n exc 1000 litres complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed up, capacity in 1000 Litre, hoisted and fixed in position with all fittings and fixtures including float valve 20 mm bore in position complete all as specified in SSR Part-I complete all as specified and directed.

S&F in repairs PVC acrylic toilet cabinet with shelves 440 mm x 325 mm x 120 mm size with shutter and mirror complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair one piece vitreous China wash down water closet pan (pedestal pattern) with integrated cistern,soft close seat cover and twin flush fittings,’S’ trap type,white colour fixed complete all as specified and directed.Make -Confirming of CAT part no. 4250 of Prayag, CAT part no. FN-WT-40751S220UFSN of CERA, CAT part no. 92573 of Hindware or equivalent of other specified make.

S&F in repairs basin/sink mixer tap 15mm bore brass chromium plate foam flow for mixing hot and cold water with long screwed shanks and fly nuts, capston head screwed for iron pipe complete all as specified and directed.

S&F in repair Vitreous China Wash Basin, white, flat back, size 630 mm x 450 mm including brackets, cutting for and pinning in ends of brackets complete all as specified and directed .

S&F in repairs wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water with long screwed shanks and fly nuts, capston head screwed for iron pipe complete all as specified and directed.Make-Confirming of CAT part No. 7280 of Prayag, CAT part No. COP273PM of Hindware, CAT part No. F1015401 of CERA or equivalent of other specified make.

S&F in repair glass shelf 500 mm x 125 mm (with brass brackets) complete all as specified and directed.Make -Confirming of CAT part No. BEA-45 of Prayag, CAT part No F87001 of Hindware, CAT part No ACN-1171N of Jaguar or equivalent of other specified make.

S&F in repairs CP brass towel ring complete all as specified and directed.Make-Confirming of CAT part No. BA-41 of Prayag, CAT part No. F880007of Hindware, CAT part No. ACN1121BN of Jaguar or equivalent of other specified make.

S&F in repair toilet paper holder complete all as specified and directed.Make-Confirming of CAT part No. BA-48 of Prayag, CAT part No. F840008 of Hindware, CAT part No. ACN1151N of Jaguar or equivalent of other specified make.

M & L for vitrified ceramic light shade tiles 8-10mm thick (square or rectangular) polished area of each tile exc 0.18 sqm but not exc 0.36 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade complete laid over screed bed or bedding layer of mortar cement mortar (1:6) , 15 mm thick complete all as specified and directed.

All as per item no 138 above but as in vertical surfaces fixed over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling boarding as in kitchen cupboard,drawers including chowkhats etc. fixed in any position complete all as specified and directed

M&L for 18-19mm thick PVC carcase unit(Flush Type)prelaminated one side with decorative choice lamination & other side balancing white lamination, including beading all around fixed with screws and solvent cement adhesive etc as in cupboards,drawers etc complete all as specified and directed.

S&F for auto closing 15-22 mm concealed hinges, 2 holes complete as for kitchen cupboard complete all as specified and directed.

S&F for soft closing cold rolled steel drawer channel with telescopic ball bearing,latch,etc complete all as specified and directed.

S&F for brass Drawer pulls/handle, 3 screw plate with fixed dished pull; 80 mm to 100mm long complete all as specified and directed.

S&F for 75mm Brass handles, cast type,polished bright complete all as specified and directed.

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and as directed .

Taking down Aluminium/copper sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed .

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) not less than 20 mm dia & 1.6 mm thick sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc for the One light/ holder/fan/exhaust fan point controlled by one switch controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as per item No 148 above but one 5 pin 5 Amp switch socket combination point on an independent board complete all as specified and as directed.

All as per item No 148 above but one 5 pin 5 Amp socket point controlled by one switch on same board complete all as specified and as directed.

All as per item No 148 above but one light point controlled by two nos two way switch complete all as specified and as directed.

All as per item No 148 above but one bell point controlled by one bell push switch complete all as specified and as directed. NOTE - For item no 148 to 152 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (iv) Minimum size of conduit shall be 20 mm dia (medium grade)

All as per item No 148 here in before but for one 16 Amp 6 Pin switch socket combination independent with 4.0 Sqmm FRLS unsheathed copper conductor single core multistranded complete all as specified and as directed.

S&F switch piano flush type 6 Amp single pole one way complete all as specified and as directed.

S&F switch piano flush type 6 Amp single pole two way complete all as specified and as directed.

Fixing only switch piano flush type 6 Amp single pole one way complete all as specified and as directed.

S&F switch socket combination 2 in 1 flush type 6 Amp 5 Pin complete all as specified and as directed.

Fixing only switch socket combination 2 in 1 flush type 6 Amp 5 Pin complete all as specified and as directed.

S&F switch socket combination 5 in 1, 16 Amp flush type complete all as specified and as directed.

Fixing onlyswitch socket combination 5 in 1, 16 Amp flush type complete all as specified and as directed.

Supply and fixing bell push ac 230 volts complete all as specified and as directed.

Supply and fix Call bell ding dong ac 230 volts complete all as specified and as directed.

Supply and fix electronic fan regulator 5 stepped type complete all as specified and directed

Fixing only electronic fan regulator 5 stepped type complete all as specified and directed

S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and as directed. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.)

Supply and fixing in replacement of VTPN DB suitable for Mounting MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and as directed.

Supply and fixing in repair MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and as directed.

S&F in repair of MCCB 100 Amp, 16KA, 4 Pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed.

S&F in repair of MCB SPN 40 Amp 240 volt 'C' 10 KA curve complete all as specifed and directed.

S&F MCB in repair of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

M & L lamp holder PVC/Polycarbonate type insulated body with back plate angle type for batten fittings complete all as specified & directed.

Fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED batten 4 Ft surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption < 20W (4 FT 20 W), luminaire lumen >2000 lm, system efficiency of > 120 lumens / W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 ºC, driver efficency >85%, power factor >0.9, THD <20% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification and connecting the same in electric source with and using PVC sheathed and insulated 3 core copper conductor cable of size 0.75 Sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed.

S&F LED wall light 12 Watt unbreakable poly carbonate suitable for mounting on wall /surface complete all as specified and directed.

S&F LED batten 2 Ft surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption < 10W luminaire lumen >1000 lm, system efficiency of > 100 lumens / W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 ºC, driver efficency >85%, power factor >0.9, THD <20% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification and connecting the same in electric source with and using PVC sheathed and insulated 3 core copper conductor cable of size 0.75 Sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed.

Fixing only LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC any type including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED bulk head luminaire internally prewired with and including premium quality diffuser for glare free light and easy to install samp fit installer complete with all accessories power consumption 10 watt luminaire lumen >1000 lm, system efficiency of > 100 lumens / W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 ºC, driver efficency >85%, power factor >0.9, THD <20% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification and connecting the same in electric source with and using PVC sheathed and insulated 3 core copper conductor cable of size 0.50 Sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed.

Fixing only LED light fitting 1x 9W/1 X 10Wbulkhead / Bldgs Security lightluminaires any type complete all as specified and as directed.

S&F square slim surface mounted LED down lighter of capacity 15 watts, 240 volts, white powder coated pressure die cast aluminium housing and bottom frame with high transmitive LGP technology, high efficiency non yellowing PMMA diffuser, complete with LEDs driver and accessories pre-wired upto terminal block lumens wattage not less than 15 watts, luminaire lumen output >1500 Lm, ingress protection IP-20, ambient temperature 0-450 C driver efficiency more than 85% power factor above 0.95, Surge protection 3 KV multi stage isolated constant current and variable working votlage 15-0270 Volts complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but with earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) including dismantling of exsisting earthing complete all as specified and as directed.( Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.)

Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelve, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good cutting exceeding 20cm girth complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof/chajja complete all as specified and as directed.

M&L for Framed brackets/purlins of mild steel work(Fe-290 Gde-E-165) of angle or Tee section cut to shape as directed and drilled for screws/fasteners and fixing the same to brick wall with fasteners complete all as specified and directed.

S & F in repair curtain rod PVC coated fancy type mild steel conduit of 20mm bore with Golden polished PVC knob, stops side rooms etc. complete all as specified and directed.

S&F Modular switch 1 way 6A,1 Module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 Module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2module complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Bell push 6A 1 module complete all as specified and directed.

S&F White cover plate with frame 1 module complete all as specified and directed.

S&F White cover plate with frame, 3 module complete all as specified and directed.

S&F White cover plate with frame, 4 module complete all as specified and directed.

S&F White cover plate with frame 6 module complete all as specified and directed.

S&F White cover plate with frame 8 module complete all as specified and directed.

S&F White cover plate with frame 12 module complete all as specified and directed.

S&F modular Fan step regulator, 120W - 2 module complete all as specified and directed.

M&L for point wiring with1100 volt grade PVC insulated and unsheathed, FRLS copper conductor multistranded cable in and including on existing PVC rigid conduit with complete accessories including provision of PVC insulated cable of 1.5 sqmm size unsheathed copper conductor as earth wire through on the same conduit to common earth and connected to earth dolly including 1.6 mm thick pressed steel Suken boxes of required size with top cover and ISI marked plastic laminated hylam sheet of required size for the one light/ holder/fan/exhaust fan/ bell point controlled by one swithch controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

M&L for point wiring with1100 volt grade PVC insulated and unsheathed, FRLS copper conductor multistranded cable in and including on existing PVC rigid conduit with complete accessories including provision of PVC insulated cable of 1.5 sqmm size unsheathed copper conductor as earth wire through on the same conduit to common earth and connected to earth dolly including modular boxes of required size ISI marked for the one light/ holder/fan/exhaust fan/bell point controlled by one swithch controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as per Srl item No. 198 here in above but one 5 pin 5 Amp switch socket combination point, on an independent board complete all as specified and directed.

All as per Srl item No. 199 here in above but one 5 pin 5 Amp modular socket point, on an independent board complete all as specified and directed.

All as per Srl item No. 198 here in above but one 5 pin 5 Amp switch socket combination point, on an same board complete all as specified and directed.

All as per Srl item No. 199 here in above but one 5 pin 5 Amp modular socket point, on an same board complete all as specified and directed.

All as per Srl item No. 198 here in above but one 6 Amp 5 Pin switch socket combination point, on an independent board complete all as specified and directed.

All as per Srl item No. 199 here in above but one 16 Amp modular socket point, on an independent board complete all as specified and directed.

B.K.ASSOCIATES