CONSTRUCTION OF PUBLIC IRRIGATION FACILITIES (05) BY CONSTRUCTION OF ESCAPE AT R.D. 43140/L OF JALANDHAR BRANCH

Amount

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Preparing, watering and ramming surface for laying concrete.

Cement concrete (M-10) with stone ballast mixing by mech. Means using concrete mixer volumetric type.

Cement concrete (1:4:8)with stone ballast mixing by mech. Means using concrete mixer volumetric type.

Supply of boulder stones as per P.W.D. specifications weight of boulder stones 3.6 to 18 kg (should not exceed 10%) from mirthal quarry with lead 129 KM including loading,unloading and stacking complete in all respect.

Supply of boulder stones as per P.W.D. specifications (weight of boulder stone 18 to 40 kg should not be less than 90%

Filling of boulder stones into wire crates hand packed including re-handling of boulder stone from stackyard to site of work lead 0.5 -1km kacha includind loading & unloading as per P.W.D specification and instruction of Engineer - in - charge. CSR ITEM 5.2(i),4.1(A),23.32

Weaving wire netting for wire crates including supply of M.S. Annealed wire 4mm dia confirming to I.S. specification with latest amendment if any binding sides and partitions to make crates of 15cmx15cm mesh size complete in all respect.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per pwd specification.

DISMANTLING OF CONCRETE ( CEMENT CONCRETE PLAIN 1:2:4)

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes.

Cold twisted deformed bars fe 500 grade for RCC work where not included in the complete rate of RCC i/c bending binding and placing in position

Dismantling brick work tile, masonry or tile lining in cement

Cement concrete lining 10cm. thick or less with mechanical Paver for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification Sandy material

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level.

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Steel casting as per I.S. specification & grade complete in all repects and to entire satisfaction of engineer-in-charge.

Providing & Fixing MS Pipe of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing MS J -Bolt with nut and washer dia 20mm complete in all respect and to entire satisfaction of engineer in-charge.

Providing chequred plate 6mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing wheel assembly 200 dia 50mm wide complete in all respect and to entire satisfaction of engineer in-charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Providing of hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 80x12mm.

Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Painting two coats with anticorrosive bitumastic Paint to give an even shade with special quality paint.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.

CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges

Supply of Spindle for hoist mechanism including threading and machining complete in all respect to entire satisfaction of engineer in charge

Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

Providing and Fixing GI pipe of 1.5" dia complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing U -anchor dia 16mm complete in all respect and to entire satisfaction of engineer in-charge.

Providing Grease Nipple

Fixing of Spherical Bearing

Fixing of Bearing Retainer

Any Other Item

SIDHU CONSTRUCTIONS CO.