Dismantling of 04 number (16 Meter 8 X 300 watt High mast tower light) and Re-installation with providing some missing and damaged utilities like single gear drum,300 watt high mast light, control pannel, ERP coated 5 core wire, stainless ste

Amount

Dismantling and fixing with Loading unloding of Towerlight from one place to another in the range of 10 km

Making foundation for 16 mtr highmast tower light

Providing of 300 watt Highmast led flood light with Extruded aluminium heat sink, designed to act as efficient heat dissipater-important for LED luminaires. Pressure die-cast aluminium cover on both sides for holding of extruded aluminium heat sink. Luminaire provided with heat resistant toughened glass. Control gear compartment is an integral part of luminaire. LED specification - Make-CREE LED/Equivalent. Colour Temp. - 5700K LEDs are provided with secondary lens optics to get optimum optical performance. The driver used is specially designed to have surge voltage, open/short circult protections.Luminaire is provided with a mounting bracket fixed on pressure die-cast aluminium covers for aiming adjustment. Degree of protection - IP66

Providing Suspension wires are stainless steel grade 316/304 of 7/19(6/19 WSC) construction and are provided with stainless steel thimble and terminals. Normal suspension systems are with two continuous wire ropes without any intermediate joints.

Providing High mast head Mast head assembly with 2 rope head frame for 2 rope system

Providing Docking arm highmast lighting Ring for Luminiaire carriage

Providing single gear double drum winches are completely self sustaining, self lubricating by mean of oil bath,grooved double drum with gear ratio of 53:1

Highmast light control pannel with complete wiring and control gear.

Providing and fixing 100 A rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel makine connections, etc. as required.

Residual current circuit Breaker 40 Ampere 4 pole, 30 mili Amp, Suitable for AC + Pulsating DC(Type A)+Harmonics

4 pole Isolators 63 A Conforms to IEC 60947-3

Providing EPR insulation type Highmast lighting pole trailing cable 5 core 4 sq mm copper 1.1 kv grade :

Providing of 16 sq mm 4 coreisi marked, upto 1.1 kv grade Alluminium armoured cable for laying service wire.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of size not exceeding 35 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. As required

Earthing with copper earth plate 600 mm X 600 mm X 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required.

Total impact of GST for the purpose of CTC