REPAIRS /RESURFACING OF ROADS, REPLACEMENT OF ROAD FURNITURE AND ALLIED WORKS AT VARIOUS LOCATIONS AT AGE AURANGABAD UNDER GE (SOUTH) AHMEDNAGAR

Amount

Repairs to pot holes n'exc 30mm deep and n' exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 Sqm of paving bitumen,VG-10 putting in premixed premix as specifide for thin bituminous carpet ( 2cm thick) well rammed and sealed with premixed sand seal coat (6.8Kg of binder with .06 cum of sand) and again well rammed (including supply of premixe ,binder and sand) complete all as specified & directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n'exc 400 sqm, exc 50mm and n'exc 100 mm deep complete all as specified and as directed.

M&L for 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1OOKN static weight and consolidating to required gradient and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013

M &L preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming / tack coat with bituminous primer (paving VG - 10 grade bitumen) @7.50 Kg per 10 Sqm complete all as specified & directed.

M&L for Premix bituminous macadam with 4% binder content of VG-30 grade bitumen by weight of total mix using mechanical pavers and vibratory rollers of appropriate specifications laid / rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) etc complete all as directed.

M &L preparing newly laid bituminous p surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming / tack coat with bituminous primer (paving VG - 10 grade bitumen) @ 2.5 Kg per 10 Sqm complete all as specified & directed. complete all as specified & directed.

M& L for premixed bituminous semi-dense asphaltic concrete 30 mm consolidated thickeness with max 5% binder content, paving butimen VG - 30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all specified and as directed.

M&L for painting lines, dashes, arrows,letters etc on roads, pavements etc 10cm wide with 2mm thick reflective marking strip of colour and shape as directed using hot thermoplastic materials conforming to BS-3262-1989, using fully/semi automatic application machine fitted with shoe heater including preparation of previously treated surfaces, cleaning of all dirt, scales, grease and foriegn material etc all as specified and directed

M&L for painting lines, dashes, arrows,letters etc on roads, pavements etc 10cm wide with minium 5mm thick reflective marking strip in two coats of 2.5mm thick each of colour and shape as directed using hot thermoplastic materials conforming to BS-3262-1989, using fully/semi automatic application machine fitted with shoe heater including preparation of previously treated surfaces, cleaning of all dirt, scales, grease and foriegn material etc all as specified and directed

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20 mm with PAMA strplens relector of model No DA 972.0 fixed with and incl MS stud of of suitable size as per manufacturers instructions. Make 3M/Green lite or equivalent as approved by GE

Supply and fixing in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Make: 3M or equivalent as approved by GE

Supply and fix in repair solar cat eye alumnium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery 1.2V / 1600MA) consisting of super bright LED with 1,000 to 18,000 mcd completed as per manufacturers instructions etc all as specified and directed. Make: 3M/Green lite

S & F road side/safety unbreakable 600mm dia Convex mirror ISO certified 9001:2015 made up of polycarbonate reflectuve mirror having body ABS /fibre with installation kit and fixing bracket mounted on 80mm dia ms pipe 2.1m long duly painted including necessory excavation and embedding in PCC 1:2:4 type B-1 (300X300X450mm) complete all as specifided and as directed.

S & F road side/safety unbreakable 800mm dia Convex mirror ISO certified 9001:2015 made up of polycarbonate reflectuve mirror having body ABS /fibre with installation kit and fixing bracket mounted on 80mm dia ms pipe 2.1m long duly painted including necessory excavation and embedding in PCC 1:2:4 type B-1 (300X300X450mm) complete all as specifided and as directed.

Supply and fixing speed bump/breaker ABS material yellow and black colour parabolic convex shape moulded of size 730x245x70mm made of steady plastic dovatail interlocking sub units jointed and fixed to make bump perfectly uniform,bump made of precoloured material (Black/Yellow) and UV stabilisers to keep them perfectly colourful studded with reflectors on either side to make clearly visible to motorist during night hours incuding fixing as per manufacturers directions complete all as specified and directed. Make: 3M or equivalent as approved by GE

Poojan Infra and Developers (BID ID -3079505)

M/s kishor M Lalwani (BID ID -3076342)

M/s.M G Kulkarni (BID ID -3079228)