BALANCE WORK FOR REVAMPING OF 10MGD WATER TREATMENT PLANT RANGIL (PART A) BY WAY OF CONSTRUCTION OF GANG HUT, PROVIDING AND FIXING OF ELECTRIC DISTRIBUTION PANEL WITH ALL ACCESSORIES, COMPLETE OVERHAULING OF 300MM, 350MM, 400MM DIA SLUICE VALVES, REV

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. (not exceeding 1.5Mtr. in width or 10Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5Mtr. including getting out excavated soil and disposal of surplus soil as directed within a lead of 50Mtr.: All kinds of soil.

Providing and laying dry stone soling in foundation trenches hand packed and consolidated by hand ramming (Quarry) including all carriages upto site of work.

Providing and laying in position cement concrete of M-75 grade 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone 40mm nominal size.)excluding cost of centering and shuttering

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20mm nominal size.)

Random Rubble masonary with hard stone from quarry in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with: i. Cement mortar 1:6 (1 Cement : 6 Coarse Sand).

Dry Stone rubble masonary with hard stone in foundation and plinth: Using quarry stone with bound stone.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. i. 1:2:4 (1 Cement : 2 Coarse Snad : 4 Graded Crushed Stone aggregate 20mm nominal size).

Supplying and filling in plinth with fine sand under floors including, watering ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone 20mm nominal size.) Crushed.

Brick work with common burnt clay F.P.S (non – modualar) bricks of class designation 75 in foundation and plinth in: i. Cement mortar 1:4 )1 Cement : 4 Fine Sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately.) K.D. Wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed Butt Hinges bright finished or required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge. K.D. Wood.

Providing and fixing wire guage shutters 30mm thick using stainless steel grade 304 wire guage with wire of dia 0.5mm and avg. width of aperature 1.4mm in both directions, for doors windows with necessary screws K.D. Wood.

15mm Cement Plaster on the rough side of single or half brick wall of mix: i. 1:6 (1 Cement : 6 Fine Sand)

Applying priming coat: i. With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Providing and fixing Ist quality ceramic glazed tiles conforming to IS:13753 of minimium thickness 5mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour, shades except begundy bottle green, black of any size as approved by Engineer-in-Charge in skitrting, risers of steps and dados over 12mm thick bed cemetn mortar 1:3 (1 Cement : 3 Coarse Sand) and jointing with grey cement slurry @3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work exposed on wall. i. 15mm dia nominal bore (Light).

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). i. 25mm nominal bore.

Providing and fixing Salem Stainless Steel AISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 510x1040mm bowl depth 178mm.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10ltr. Low P.V.C flusing cistern including flush pipe (of approved make) manually controlled device (handle lever) conforming to IS:7231 with all fitings and fixtures complete including cutting and making good the walls and floors wherever required. i. Stainless steel AISI-304 (18/8) Orissa pattern W.C pan of size 585x480mm with flush pipe and integrated type foot rests each.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even smooth complete.

Renewing glass panes, with Putty & nails wherever necessary. i. Float glass panes of thickness 4mm.

Supplying and fixing new wooden fillets wherever necessary. i. Wood fillets.

Providing and fixing ISI marked oxidized M.S tower bolt black finish, (Barrel type) with necessary screws etc. complete..

ii. 200x10mm

ii. 150x10mm

Providing and fixing ISI marked oxidized MS handles conforming to IS:4992 with necessary screws etc. complete. i. 100mm

Providing and fixing ISI marked oxidized M.S Sliding door bolts with nuts and screws etc. complete. i. 300x16mm

Providing and fixing IS:1341 marked M.S heavy weight Butt Hinges with necessary screws etc. complete.

i. 125x90x4.00mm

ii. 100x75x3.50mm

Providing and fixing of taps bib cocks of approved quality and colour (Jaquar / Hindwarre).

iii. 15mm nominal bore

iv. Mixer

Providing and fixing of bath set of approved quality and colour (towel ring, soap case etc.).

Providing and fixing 35Ltr. capacity Gyser of approved make ISI marked (Copper body) Venus make including PVC connections and all sorts of carriages etc. complete.

ii. 20Ltr.

Centring and Shuttering including strutting, propping etc. and removal of form for:

i. Foundation, footings, bases of columns etc. for mass concrete.

ii. Suspended floors, roofs, landings, balconies and access platform.

iii. Edges of slabs and breaks in floors and walls (Under 20cms wide).

Providing and fixing of Daikin inverter split AC (hot and cold) including providing and fixing of VG 400 (170 to 270KV) Voltage stabilizer including all necessary accessories like wiring, 63Wat D.P MCCB, 4mm thick SSK Combined Switch of 16Amp etc. Complete job. The payment shall be made only after testing and commissioning. i. 1.5 Ton

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. TMT Bars

Providing and fixing plained Eves boarding. (K.D Wood) 300x32mm

Providing corrugated colored G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m2.

Providing ridges or hips of width 60cm overall width plain G.S Sheets fixed with polymer coated J or L Hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. i. 0.80mm thick with Zinc coating not less than 275gm/m2

Marble stone flooring with 16mm (average) thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20mm (average) thick base of cement mortar 1:4 (1 Cement : 4 Coarse Sand) laid and jointed with cement slurry including rubbing and polishing complete with: i. Raj Nagar Plain

Providing and fixing gang saw cut mirror polished (pre-moulded and pre-polished), machine cut for kitchen platform, vanity counters windows sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cment mortar 1:4 (1 Cement : 4 Coarse Sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape (Area of slab over 0.5Sqm) 16mm thick.

Extra for nosing in marble stone for treads.

Providing and fixing of exhaust fans 300 x 300mm size reputed make IS mark including all sorts of carriages etc. complete

Providing and fixing of PVC Pipes of make (Prince) including all fittings (Bends, tees) etc.

i. 100mm dia

ii. 75mm dia

Providing and fixing of angle valve 15mm of make Jaquare / Hindware.

Providing and fixing of flat pressed 3 layer particle board medium density. The job includes fixing and cost of mica including labour, nails, fevicol and wood primer complete.

i. 16mm thick

ii. 19mm thick

iii. Mica

Providing and fixing of handles, hinges of stainless steel of standard make

i. Channel 20’ long (Godrej)

ii. Handles (0.30length(

iii. Small handles 0.150

iv. Hinges (1’x1/2”)

v. Big locks (Godrej / Link)

vi. Small locks (Godrej / Link)

Providing and fixing of electric items for electrification of building including labour charges upto site of work complete.

i. Providing and fixing lighting point in 1.5sqmm multistrand PVC wire to be laid in conduits including providing and fixing of switches of standard quality / reputed make with all fixtures complete job.

ii. Providing and fixing of heating points in 2.5sqmm multistrand PVC copper wire to be laid in conduit including providing and fixing of 16A switches of standard quality / reputed make with all fixtures complete.

Providing of 5A, 3 Pin Plug Point in 1.5mm Sqm multistand PVC copper wire of approved quality laid through 25mm PVC channel / recessed in wall with hylam sheet of required size Complete job.

Providing and fixing of 1200mm Sweep Ceiling Fan complete with accessories including fan dimmer of ISI make.

Providing and fixing of change over switch all other allied items complete job etc.

Providing and fixing of 16Amp MCB of Indocap / Havels.

Providing and fixing of 3Pintop of standard quality.

Providing of 7/18PVC insulated copper wire of approved quality make (Polycap / Havels) for main Service Line.

Providing and fixing of water tanky having capacity 1000Ltr. make (Comfortable / Moon). The job includes all costs of fittings required as per site.

Providing and fixing of matting:

i. Thermocool.

ii. Excel

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size. with plastic module frame of approved make and shade with 6mm thick hard boars backing.

Providing hoisting and fixing trusses / purlins rafters/ posts / post plates or like components including cost of screws etc. complete (Popular Wood).

Providing and fixing colour coated P.G.I. sheet complete including all carriages

Carriage of material from source to dumping / actual site of work by mechanical transport.

i. Sand avg. lead 15Kms.

ii. Aggregate avg. lead 15Kms.

iii. Stone Soling avg. lead of 15Kms

iv. Bricks avg. led 30Kms.

Providing of furniture to AEE’s office at Divisional Office (Sub Divisional Project). The job includes all sorts of carriage and fixing charges.

i. Rotating executive Chair upholstered in bonded block eco leather and PVC having padded seat 3600 Swivel, heavy duty metal base.

ii. Nikamal Recardo Office table (Walnut finish) having modern assembly.

iii. Supply of wooden chairs.

iv. 3 No.’s Computer table for Divisional Office with 4 No’s Computer chairs (Size of table 2.5’ x 4’) and 1 No. Nikamal Recardo Office table (Walnut finish) having modern assembly.

Providing and fixing of Gate Valve of 100mm dia along with MS tail piece and flanges. The job includes hire charges of welding machine, all sorts of carriage labours complete job.

Supply of IS search lights. The job includes all sorts of carriages.

Providing and fixing of curtains and stainless steel rods of 25mm dia.

i. Curtains

ii. Rods

Removing dry or oil bound distember water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting of G.S Sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. (Old work one or more coats

Painting with ready mixed synthectic enamel paint of approved brand and manufacture in all shades to given an even shade. Old steel work (one or more coats).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coats on old work.

Finishing walls with Acrylic smooth exterior paint of required shade: i. Old work (one or more coats applied @0.90 Ltr./10Sqm)

Repairs to plaster of thickness 12mm in patches of area 60Sqm and under including cutting the patch in proper shape rocking joints and preparing plastering the surface of walls complete including adding water proofing compound. The job includes disposal of rubbish to the dumping ground with 50Mtr. lead with cement motor.

Providing and fixing of 12mm thick budloo paneling and over 12mm thick plyboard supporting the paneling. The job including two coats of touch wood polish, cost of nails and refixing of electric fitting after fixing the paneling. The job includes all taxes, carriage levies complete job.

Dismembering of 1.5HP motor coupled with reduction gear and churner, replace the damaged items i.e gear assembly, coupling, Fan, M.S extension road and greasing, oiling the gear assembly and replace / repair the dry starter (15HP) after replacing the same then assemble in original position. The job includes two coats of metal primer and anti-corrosion metal paint. The item includes all sorts of carriage, labour, testing, commissioning and trial run for a period of 6months complete job.

Supply of CI hand wheels of 450mm dia for Sluice valves. The job includes fabrication charges, labour all sorts of carriage taxes, levies complete job.

Raising of existing extension rods (150mm) long. The job includes hire charges of welding machine, labour, taxes complete job.

Dismembering of sluice valve top (Gland) and replace the damaged / corrugated nut and bolts, R.I. Cloth, packing with new one, then assemble the same in original position. The job includes labour, taxes, levies complete job.

Supply, installation, testing and commissioning of LT control panel / power control unit to be installed make Havels / I&T. The job includes all taxes, levies complete job.

i. Contractor MNX 650

ii. Main incomer 400A 50KA MCCB TP

iii. DG Incomer mains 200A 35K MCCB TP

iv. Changeover for mains / DG Supply TPN 25A

v. Servo output MCCB 300A 35KTP

vi. MCCB 100A TP 25KA

vii. Starter for 3 phase 30HP Motors

viii. Starter for 5HP 3 phase 30HP Motors

ix. Al Bus bar 800Amps.

Supply, installation, testing and commissioning of LT control panel / power control unit to be installed make Havels / I&T. The job includes all taxes, levies complete job.

x. Insulators

xi. Multifunctional volt Amp. Freq. P.F

xii. CT Coil 750/5A

xiii. Indications

xiv. Locks, nuts bolts and other accessories.

xv. Metal encl. made of MS 14 SWG sheet duly powder coated weather proof.

xvi. Termination of cables thimbles etc.

250KVA 3 Phase servo voltage stabilizer unbalanced type oil coiled with all necessary protection core type CRGO copper wond indoor type with oil filled make L&T / Havells. The job includes taxes levies, commissioning complete job. i. Rated capacity 250KVA ii. Input voltage range 180-470AC line voltage 3 phase. iii. Output voltage range 415V+/- 1% iv. Frequency 50HZ v. Colling ….. oil type vi. Control type … Digital Micro processor based. vii. Temperature rise (max)… 45 Degree (C) above Ambient temp. viii. Correction speed …. 20V/SEC ix. Output Voltage regulation…. +/-1% from no load to full load. x. Trip and restart…Auto system. xi. Overload capacity… 120% xii. Duty cycle… 100% xiii. Waveform distortion ….. Nil xiv. Effect of load PF….Nil xv. Audio visual alarm… for tripping condition. xvi. Reset… manual / auto reset with time delay and programmable. xvii. System… unbalanced 4 wire RYBN xviii. Connection …. Star. xix. Mounting …. On unidirectional sheel

Providing and fixing of multi stand copper wire 50Sqm

Connection wire for mortars i. 6mm sq flexible multi strand ii. 10mm sq iii. 16mm sq iv. 25mm sq v. 35mm sq vi. 50mm sq

Providing of floor insulator mats

Repair of 30KV servo and lighting system

HASHMI INFRASTRUCTURE PRIVATE LIMITED

SOFI KHALID RASHID

M/S AL HAYAT CONSTRUCTIONS