REPAIR AND RE-CANNING TO ALL TYPES OF WOODEN CHAIRS INDCLUDING POLISHING AND PAINTING TO STEEL FURNITURE AT MIL STATION NAGROTA UNDER GE NAGROTA.

Amount

Chair dining CB/WB: Dismantling of old unserviceable front legs of chairs dining CB/WB and S&F of new front leg made of 1st class HW shisham, made of shape and size and making wrought duly polished . PVC shoe shall be provided at bottom of legs. Complete all as specified and directed FD-228/225/279/285.

Dismantling of old unserviceable rear legs of chairs dining CB/WB and S&F of new rear leg made of 1st class HW shisham, made of shape and size and making wrought duly polished. PVC shoe shall be provided at bottom of legs .Complete all as specified and directed FD-228/225/279/285.

Dismantling of old unserviceable rails of chairs dining CB/WB and S&F of new rails made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-228/225/279/285.

Dismantling of old unserviceable stiffners (side/middle) of chair dining/WB and S&F of new stiffners H type (side/middle) made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-228/225/279/285.

Dismantling of old unserviceable back support of chairs dining CB/WB and S&F of new back support made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-228/225/279/285.

Dismantling of old unserviceable ply of chairs WB and S&F new ply top 6mm commercial (ISI marked) made to shape and size . Complete all as specified and directed FD-225/285.

Chair writing :Dismantling of old unserviceable front legs of chairs writing/CBA and S&F of new front leg made of 1st class HW shisham, made of shape and size and making wrought duly polished. PVC shoe shall be provided at bottom of legs . Complete all as specified and directed FD-280/250.

Dismantling of old unserviceable rear legs of chairs writing and S&F of new rear leg made of 1st class HW shisham, made of shape and size and making wrought duly polished. PVC shoe shall be provided at bottom of legs. Complete all as specified and directed FD-280/250.

Dismantling of old unserviceable rails of chairs writing and S&F of new rails made of 1st class HW shisham, made of shape and size and making wrought dulty polished . Complete all as specified and directed FD-280/250

Dismantling of old unserviceable stiffiners H type (side/middle)of chairs writing and S&F of new stiffiners (side/middle) made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-280/250

Dismantling of old unserviceable back rest of chairs writing and S&F of new back rest made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-280/250

Dismantling of old unserviceable arms of chairs writing and S&F of new arms made of 1st class HW shisham, made of shape and size and making wrought duly polished. Complete all as specified and directed FD-280/250

Chair easy :Dismantling of old unserviceable front/rear legs of chairs Easy and S&F of new front/Rear leg made of 1st class HW shisham, made of shape and size and making wrought duly polished . PVC shoe shall be provided at bottom of legs. Complete all as specified and directed FD-229

Dismantling of old unserviceable seat rails of chair easy and S&F of new seat rails of seat & back made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-229/201

Dismantling of old unserviceable back rails of chair easy and S&F of new back rails of seat & back made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-229/201

Dismantling of old unserviceable back support of chair easy and S&F of new back support rails of seat & back made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-229/201

Dismantling of old unserviceable Arm Rest of chair easy and S&F of new Arm Rest made of 1st class HW shisham, made of shape and size and making wrought duly polished . Complete all as specified and directed FD-229/201

Chair dining cushioned : Dismantling of old unserviceable front legs of chair dinning cushioned and S&F of new front legs made out 1st class hard wood teak, made to shape & size using with adhessive & bamboo pins and making wrought duly polished. PVC shoe shall be provided at bottom of legs. Complete all the specified and directed FD/E6/MAP/10 & FD/MAP-II/04

Dismantling of old unserviceable rear legs of chair dinning cushioned and S&F of new rear legs made out 1st class hard wood teak, made to shape & size using with adhessive & bamboo pins and making wrought duly polished. PVC shoe shall be provided at bottom of legs. Complete all the specified and directed FD/E6/MAP/10 & FD/MAP-II/04

Dismantling of old unserviceable seat rails of chair dinning cushioned and S&F of new seat rails made out 1st class hard wood teak, made to shape & size using with adhessive & bamboo pins and making wrought duly polished. PVC shoe shall be provided at bottom of legs. Complete all the specified and directed FD/E6/MAP/10 & FD/MAP-II/04

Dismantling of old unserviceable stiffner 'H' type of chair dinning cushioned and S&F of new stiffner 'H' type made out 1st class hard wood teak, made to shape & size using with adhessive & bamboo pins and making wrought duly polished. PVC shoe shall be provided at bottom of legs. Complete all the specified and directed FD/E6/MAP/10 & FD/MAP-II/04

Dismantling of old unserveciable seat cushion and S&F of 75mm thick 32 density foam with coloured fabric duly stitched and on existing plywood . All as specified & directed make:- kurlon/ Sleepwell. Note:- Tapestry cloth shall not be less than 300/- per metre as approved by GE/Engr-in-Charge. FD/E6/MAP/10 & FD/MAP-II/04

Chair dining JCO/OR: Removing of old UNSV broken PVC seat from Chair Dining JCO/OR and S&F new PVC seat Make AMCO or equivalent before tightening of seat rails.Complete all as shown on drg and directed FD/MAP/Ph-II/05

Repair to wooden chairs: Removing of loose joints of frame of any type chairs and refixing the same using with adehesive and bamboo pins to tighening the chair. PVC shoe shall be provided to all legs where ever required. Complete all as specified and directed. Note- Caning and replacement of parts are not inculded in quoted rate FD-279/250/280/77/229/56/285 & etc

Canning : Removing of old unsrviceable cane from chairs and recanning of all type of Chairs with plastic cane 2mm wide half round gola type and boardering with 4mm wide cane. Make- Premier/Shah/Harihant or approved equivalent all as specified and directed FD-284/204/279/229/280/252

Chair steel capsule/writing/visitor: Removing old u/s faded upsolstry of seat & back from chair and S&F new upholstry duly stictched and with PVC lipping all round and rubber. Note:- colour of upholstry shall be approved by Engr-in-Charge. Minor repair shall be carried out witout any extra cost. rate shall be deemed upholstry work. Cost of upholstry shall not be less than RS 400/- RM complete all as specified and directed

S&F in repair handle black integral skin polythene reinforeced with MS inset, screch and weather resistant to chair

Chair Revolving Executive: Removing old unsv faded upholstry of seat and back including handle form chair and S&F new upholsry duly stitched and with PVC lipping all round and rubber Note:- Colour of upholsry shall be approved by Engr in charge. Minor repair shall be carried out without any extra cost. Rate shall be deemed with upholstry work. Cost of upholstry shall not be less than Rs. 400/- Rm. Complete all as specified and directed.

S&F in repair handle black integral skin ploythene reinforced with MS inset , screch and weather reisistant dully fabric to chair complete all as specified and directed

S&F of hudrolic heavy duty for chair revolving

S&F in repair pedestal assemble heavy duty of chair revolving executive with twin wheel castors set of five complete all as specified and directed

Chair CB steel with Arms: Removing of old unsv seat from chair CB steel and S&F new seat made of 12mm plywood commercial with 50mm thick form 32 density covered with fabric of approved quality duly drilled hole on seat frame with appropriate 04 Nos steel screws. 04 numerbs rubber shoe at bottom of frame shall be provided whter ever required. Complete all as specified and directed (FD-75)

Chair CB steel with Arms: Removing of old unsv seat from chair CB steel and S&F new seat made of 12mm plywood commercial with 50mm thick form 32 density covered with fabric of approved quality duly drilled hole on seat frame with appropriate 04 Nos steel screws. 02 numerbs rubber cap on top of frame shall be provided whter ever required. Complete all as specified and directed (FD-75)

Taking down old unsv arms of chair CB steel with arm and S&F new arms of 2nd class hard wood shisham duly painted with synthetic enamel paint black.

S&F of 04 Ns flat iron 25x535x3mm thick shall be welding at bottom os seat/back of chairs with arms duly painted with a coat of black enamel paint.

Painting to frame of chair with ams with a coat of synthetic enamel paint including denting and preparation of surface

Chair CB steel without Arms FD-75: Supply and fixing of seat and back of teak wood duly canned with 2mm wide cane plastic as per Godrej pattern with necessary nuts, bolts, washer etc afer taking out old unsv seat and back complete all as specified and directed

M&L for replacement of MS support 50cm long made of flat iron 25x4mm thick weiling to main body complete all as specified and directed

Polishing : Preparation of old surface with emery paper ,filling the gaps with bee wax plaster of paris, applying raw siena with de-natured spirit and smoothing the surfaces with sand paper and applying two coats of french polish of superier quility all as specified and as directed to give glossy finish for the following furniture :- Note:- Polishing work to be done in MD/OTM accn military station as well as furniture yard of GE Nagrota

Chair writing/Chair CBA complete all as specified and directed FD-280/F-30

Chair dining CB/WB complete all as specified and directed FD-279

Chair dining Offrs complete all as specified and directed FD/E6/MAP/09

Chair easy complete all as specified and directed FD-229

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 4485.00 during AOC Note:- Tenderers shall not quote for this Schedule

PACHNANDA BUILDERS

VEE KAY IND