REPAIR REPLACEMENT OF WIRING AND OTER CONNECTED FITTINGS FIXTURES IN SECTOR C D E AND F AT CHANDIMANDIR

Amount

Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on existing sunken box and provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 02 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed

All as per serial item 02 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 02 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator in and including rigid non metallic PVC heavy duty CONCEALED CONDUIT complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 06 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed

All as per serial item 06 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 06 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on existing sunken box and provision of 3mm thick plastic laminated sheet, comprising of One light point controlled by two way switch complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Supply & Fixing for switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for switch piano, flush type, 5 amps, 230 volts, single pole, two way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 2 in 1, 5 Amps flush type all as specified and directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type ISI marked all as specified and directed by Engineer-in-charge

Supply and fixing for Bell, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge.

Supply & Fixing for bell push flush type 6 Amps, single pole, 230 volts complete all as specified and directed by Engineer-in-charge.

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply and fixing for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fixing for bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity. (Make :- C&S Cat part No:-CG80IB6WLED or equivalent make as specifed in Appx 'C'

Supply and fixing indoor decorative extruded aluminium anodized housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaries' (LED batten shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 4 feet (appx) size, high efficiency electronic driver, system wattage not more than 20 watt (lumen output not less than 2000 lumen), power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glare free, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm". Make C&S Cat No LTDC01220WLED/WD or equivalent makes mentioned in Appx 'C' Notes:-l. The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report of LED chip used. 2. The contractor shall also submit test report from the manufacture to comply with all requirements and specifications given in the contract. 3. The product not complying with contract specifications will be rejected and contractor or the manufacturer will have no claim on account of rejection of his material /product on this account. 4. The contractor shall submit warranty certificate from manufacturer for minimum 1 year.

Supply and fixing indoor decorative extruded aluminium anodized housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaries' (LED batten shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 2 feet (appx) size, high efficiency electronic driver, system wattage not more than 10 watt (lumen output not less than 1000 lumen), power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glare free, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm". Make C&S Cat No LTTB2F10WLED/W or equivalent makes mentioned in Appx 'C' Notes:-l. The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report of LED chip used. 2. The contractor shall also submit test report from the manufacture to comply with all requirements and specifications given in the contract. 3. The product not complying with contract specifications will be rejected and contractor or the manufacturer will have no claim on account of rejection of his material /product on this account. 4. The contractor shall submit warranty certificate from manufacturer for minimum 1 year.

Supply and fixing for 9W LED BULB B22 WHITE all as specified and directed. (Make :- C&S Cat part No:-LTHPLEDLAMP9WB22 white or equivalent make as specifed in Appx 'C'

Disconnecting and taking down carefully opper/aluminium sub main wiring complete, including existing batten/surface conduit etc., removing materials and making good disturbed surfaces of wall, floors, etc. complete all as specified.

Supply and fixing for sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC conduit 20mm size(minimum size) complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 6 sqmm and one single core of 6 sqmm cable shall be considered as 1 running metre.(ii) Conduit & conduit accessories shall be measured & paid for separately (iii) Color code shall be Red for phase, black for neutral and green for earth

Supply and fixing for sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 10 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 10 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC conduit 20mm size(minimum size) complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 10 sqmm and one single core of 10 sqmm cable shall be considered as 1 running metre.(ii) Conduit & conduit accessories shall be measured & paid for separately (iii) Color code shall be Red for phase, black for neutral and green for earth

Supply and fixing MCCB, 100 Amps, three pole,3 phase ,36 KA, 415 volt with adjustable thermal and maganetic release complete all as specified and directed by Engineer-in- Charge. (Make:- Cat Part No IHA13EBT0100 of Havell's or equivalent make as specifed in Appx 'C'

Supply & Fixing for sheet metal enclosure DB's 415 Volts, IP-43, suitable for mounting MCB's, TPN, 4 way double door flush mounted with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge.(Make :- ABB Cat Part No. NSYN8690TPN0M04 or equivalent make as specifed in Appx 'C'

Supply & Fixing for sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way double door with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge.(Make :- Havells Cat Part No. DHDNSHODAW08 or equivalent make as specifed in Appx 'C'

Supply and fixing sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 12 way double door with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge.(Make :- Havells Cat Part No. DHDPSHODRW12 or equivalent make as specifed in Appx 'C'

Supply and fixing sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 2 way double door without bus bar complete all as directed by Engineer-in-charge.

Supply & Fixing for MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat No DHMGCSPF006-032 or equivalent make as specifed in Appx 'C'

Supply & Fixing for MCB ,SPN , 240 volt,06- 32Amps 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat NoDHMGCSNF06-032 or equivalent makes in ABB, L&T, SCHNEIDER, LEGRAND

Supply & Fixing for MCB ,SPN , 240 volt, 40Amps 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat NoDHMGCSNF040 or equivalent makes in ABB, L&T, SCHNEIDER, LEGRAND

Supply & Fixing for MCB ,TP , 240 volt, 63Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells CaPart No DHMGCTPF063 or equivalent make as specifed in Appx 'C'

Supply & fixing of 20 mm dia, flexible non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge.

Material & labour for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including Gl protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on pole or control board or main switch and Gl pipe medium grade 20mm bore for watering funnel with wire mesh CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 20 mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicated including testing on completion all specified and directed. Note : The unit rate including for protection pipe and Gl earth wire 4.00 mm dia from top to earth plate up to 7.5 meter

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete , all as specified and directed

Disconnecting the power supply, taking out existing UNSV wall mounting type sheet metal encloser of any size and type along with all fittings/fixtures and S & F wall mounting type indoor LT panel board fixed with 04 Nos anchor bolts of suitable size, fabricated out of 2mm thick CRCA sheat duly powder coated dust vermin and water proof, with front doors openable type for individule compartment with locking arrangement suitable for 3 phase 4wire 415 volts 50 Hz AC supply complete with and including the following (a) Copper bus bar strif size 32X6mm length 600mm-4 Nos (b) MCCB 4 Pole 63 Amps -01 No (incoming) (c) MCB SPN 63 Amps -6 Nos (d) Muilty function meter shown voltage.current, watts etc-1 No (e)LED indicators RYB-01 set of three (f) Sutiable size single core copper conductor PVC insulated cable for connections from main MCC3 output to busbars with copper lugs on both ends complete. (g) Repair of damaged wall portion to match with the original

Supply & fixing sheet metal enclosure for suitable for fixing of energy meter size of 900mmx 600mmx250mm made of CRCA sheet thick 1.20mm frontside openable having locking arrangement and provision of 4 No Glass 75mm x150mm size in front door for measuring meter reading in front of meter and fixing of 2 way DB complete a!' as specified and directed.

Supply & fixing for 20 mm dia, flexible non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified

WR Traders

Guru Kirpa Trading Company

M.P. Builders

Vasudeva Trading Co.

HARISH SALES CORPORATION

MS R G ENTERPRISES