CO Providing of open Gym equipment and installation of swings at Benmore Ward No 17

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. Hard Roack blasting prohibited and their intermediate classification of soils including, dewatering wherever required, setting of to the required lines, levels as shown on the drawing and directed by the Engineer -in-charge at site, according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at approved dumping site Bharyal. including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required).All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation the usefull stones as per the direction of the Engineer-in-Charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

P/F out door rubble safety tiles made of black or coloured recycled S&R rubber in thickness from 2.5 cm till 10 cm in dimensions of 50×50 cm×100×100 cm thickness 25mm to 100mm 500mm×500mm, 1000×1010mm tiles weight 5.78 kg including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing heavy duty Standard See saw Arc swing ( Product Area 5.6 ft x 1.5 ft Safe Play Area 9.6 ftx5.5 ft) 2.4 meter high around level consisting of top bar of swing made by 80mm dua MS pipes and 2 nos chain should be minimum 6mm thick electro galvanized tested with in built 2 nosfor safe and comfortable swing. Antiskid chequered reinforced FRP belt should be Heavy duty only. finished and proper fixed in cement concrete block of size 0.60x0.60x0.75mtr. (ISI Marked )including all taxes and all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Leg Press Providing designing and fixing of leg press of size 1775×1900×580 mm fabricated with main post of 114 mm dia nad 3.00 mm thick, connecting pipe dia 60mm thickness 2.75mm Yellow sleeve is dia 159mm thickness 8.0mm Handle bar dia 33mm thickness 2.85 mm , PVC Handle dia 33, Handle and dia 27 having bottom plate 260 mm dia with thickness 12.00 mm withABS Cap/cover including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge including all taxes and all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Air Walker:- Providing, designing and fixing of Air-Walker of size 1100x550x1480 mm fabricated with main post of 114 mm dia and 3.00 mm thickSwing leg is dia 48 mm thickness 2.75mm, Handle beam is dia 42 mm thickness 2.75mm , and other pipes of 2.75 mm thick. (ISI Marked) including all taxes and all leads lifts and other incidentals as per direction of Engineer-in-Charge.

Arm Wheel:- Providing, designing and fixing of arm wheel in a pair of size 850x800x1800 mm fabricated with main post of 114 mm dia and 3.00 mm thick , Yellow sleeve diameter 159 mm thickness 8.00 mmfor approved quality as per directed by enigneer- in charges including all taxes and all leads lifts and other incidentals as per direction of Engineer-in-Charge.