Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC GC ROAD ABDUL LATIF ROAD PO TITAGARH KOLKATA 700119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹39.7 L+₹6.9 L (21.0%)Rejected-Finance 7 11 1 BROJONATH LAHIRI BISHNUPUR SOUTH 24 PGS WEST BENGAL 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹42.1 L+₹9.3 L (28.3%)Rejected-Finance BMC 1 54 GANTI NETAJI PALLY PO GANGANAGAR KOLKATA 700 132 INDIA | 24 PARAGANAS NORTH | WEST BENGAL | 700132 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹42.5 L+₹9.7 L (29.7%)Rejected-Finance 51 1 FULBAGAN ROAD BAGHAJATIN KOLKATA 700086 WEST BENGAL | KOLKATA | WEST BENGAL | 700086 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹42.6 L+₹9.8 L (30.0%)Rejected-Finance G C ROAD ABDUL LATIF ROAD PO TITAGARH P S RAHARA KOLKATA 700 119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹31.5 L
EMD Value
₹63,000
Closing Date
3 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
8062/B/E8
2022_MES_535845_1
GE/ALP (8062B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE ALIPORE KOLKATA
Class D and category a (i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹63,000
Yes
22 Sept 2022
5 Jul 2022
4 Aug 2022
5 Jul 2022
3 Aug 2022
21 Jul 2022
Amount
BSA/KOL/REV/05/2022-23 Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.
Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n. exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.
Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for foundation/ mass concrete complete all as specified and as directed.
Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for cement concrete (1:3:6), type C2 (using 40 mm graded aggregate) as in foundations, filling and mass concrete for steel posts. complete all as specified and as directed.
Material and labour for 50mm thick cement concrete type B-2 (1:2:4) using (20 mm graded stone aggregate) as in flooring finished the surface even and smooth without using extra cement complete all as specified and as directed.
Supply and fixing for Fe 410 -W (Gde- E- 250) quality-A Rolled mild steel sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.
Supply and fixing for rolled mild steel sections Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.
Material and labour for mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 20 and n. exc 25 cm long complete all as specified and as directed.
Material and labour for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. complete all as specified and as directed.
Material and labour for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges/guttes/valleys complete all as specified and as directed.
Material and labour for rendering 15mm thick on brick/concrete surface finished the surface even and smooth without sing extra cement complete all as specified and as directed .
Material and labour for Preparing new plastered surfaces of wall Priming plastered and other surfaces with alkali resistant primer and appling two coats of cement base paint complete all as specified and as directed.
Material and labour for river sand filling under floors including watering and consolidation complete all as specified and as directed.
Material and labour for hardcore of broken stone aggregate gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.
Material and labour for 100mm thick cement concrete type B-2 (1:2:4) (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and with pigment complete all as specified and as directed.
Material and labour for chequered cement concrete tiles of size 20cm x 25mm thick, set, jointed with grey cement or pigments 20cm x and pointed in neat cement slurry in floors over and including 15mm thick in cement mortar (1:6) screed bed or bedding layer or laying floor finishes complete all as specified and as directed.
Material and labour for 75 mm thick PCC 1:3:6 type C-1(using 20 mm graded stone aggregate) as in plinth protection complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Returning, filling in including spreading levelling watering and well ramming in layers not. exc 25 cm thick complete all as specified and as directed.
Removing excavated material to a distance exc 1.5 km but n.exc 5 KM and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and as directed.
AC/KOL/09/GE(A)/QWM Supplying and fixing for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. (upto 04 storey High of building)
Material and labour for preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete all as specified and as directed. (upto 04 storey High of building)
Material and labour for Cub-boards shutters made with 19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work complete all as specified and as directed. (upto 04 storey High of building)
Material and labour for brick work with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed. (upto 04 storey High of building)
Material and labour for rendering 10mm thick in cement mortar (1:6) on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement to match the existing surface complete all as specified and as directed. (upto 04 storey High of building)
Dismantiling of floor hearth including cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and as directed. (upto 04 storey high of building)
Material and labour for one coat oil bound distemper over a coat of primer on OLD plastered surfaces preparatory to distemper incl preparation of wall surfaces complete all as specified and as directed.
Material and labour for glazed ceramic coloured wall tiles of size 450X300X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles. complete all as specified and as directed. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch "A') (upto 04 storey High of building)
Material and labour for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. (Note:- Screed bed shall be measured and paid Seperately under respective items of Sch "A') (upto 04 storey High of building)
Material and labour for non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. (Note:- Screed bed shall be measured and paid seperately under respective items of Sch "A') (upto 04 storey High of building)
Material and labour for vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match complete all as specified and as directed. (Note:- Backing coat/Screed bed shall be measured and paid Seperately under respective items of Sch "A') (upto 04 storey High of building)
Supply and fixing for UPVC Pipes (SCH-80) 100 mm dia pipes pipes and fittings include jointing materials complete all as specified and as directed. (upto 04 storey High of building)
Supply and fixing for 15 mm bore cast copper alloy CP angular valve ,with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed:-
Supply and fixing for 15 mm bore bib taps cast copper alloy, Chromium plated with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
Supply and fixing for sinks without drainage board made of stain less steel 1mm thick,kitchen with plugs, washer and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 410mm x 330mm x 160mm. complete all as specified and as directed.
Supply and fixing for Plywood 12 mm thick, grade BWR, type BB, fixed with screws to timber frame work for moduler kitchen including all necessary fittings complete all as specified and as directed.
Supply and fixing for decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.
Supply and fixing for brass locks with two levers, drawer, grade I, size 50 mm including all necessary fittings complete all as specified and as directed.
Supply and fixing for brass drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long including all necessary fittings complete all as specified and as directed.
Supply and fixing for ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
Supply and fixing for 75 mm size butt hinges stainless steel, and fixed including all necessary fittings complete all as specified and as directed.
Supply and fixing for brass handles 75 mm length, cast type, polished bright including all necessary fittings complete all as specified and as directed.
Material and labour for 2nd class hardwood Plain fillets.square, rectangular or triangular in section, clean sawn, secured with nails or brads not. exc 3 Sqm complete all as specified and as directed.
BSA/KOL/REV/33/2022-23 Excavating in post holes (or similar holes) each n exc 0.50cu.m getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.
Material and labour for hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.
Supply only chain link MS galvanisd fencing, any size or type complete all as specified and as directed.
Supply and fixing for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified and as directed.
Material and labour for mild steel round bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gd I, IS-432 Part I complete all as specified and as directed.
Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and getting out hard/dense Soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not. exc 25 cm. complete all as specified and as directed.
Removing excavated material (soil/soft rock) exc. 1.5 Km but n. exc 5 Km and depositing out side the MOD land. complete all as specified and as directed.
Material and labour for PCC ( 1:4:8 ) Type D -2 (using 40 mm graded stone aggregate) as in foundation complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material and labour for rendering 15 mm thick, set in cement mortar (1:4), as on brick/concrete surface finish even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer upto four storey high bldg complete all as specified and directed.
Material and labour for providing cement concrete type B-1,1:2:4 (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and directed.
Supply and fixing for framed work such as grills, gratings, steel gates etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Material and labour for surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.
Material and labour for broken stone boulders hard core, broken to gauge n exc 63 mm,deposited,spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed.
Material and labour for 100mm thick PCC type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base for floors, complete all as specified and as directed.
Material and labour for machine pressed precast concrete coloured interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M 35 Grade complete all as specified and as directed.
Material and labour for sand filling under floor or paving laid including watering and consolidation wo a true surface for laying of paver block.
BSA/KOL/REV/36/2022-23 Excavating in post holes (or similar holes) each n. exc 0.50 cu.m gettingout returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard dense soil complete all as specified and as directed.
Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and getting out soft/loose soil complete all as specified and as directed.
Material and labour for PCC 1:3:6 Type C2 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Material and labour for PCC ( 1:5:10 ) Type D -2 (using 40 mm graded stone aggregate) as in foundation complete all as specified and as directed.
Material and labour for 50 mm thick cement concrete type B1,1:2:4 (using 20mm graded aggregate) as in floors finish even and smooth etc complete all as specified.
Demolition of brick or stone / boulder work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.
Removing excavated material in exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point etc complete all as specified and as directed.
Material and labour for rendering 15 mm thick, in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer upto four storey high bldg complete all as specified and as directed.
Material and labour for providing cement concrete type B-1,1:2:4 (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and as directed.
Supply and fixing for Steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss,purlins, rafter etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and as directed.
Supply and fixing for 11-15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n. exc 10cm long complete all as specified and as directed.
Supply and fixing for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Supply and fixing for Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ficed with self tapping screws as specified as in ridges. complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .