AMC for Plant Building and Civil Structures at RGTPP, Khedar, Hisar 2022-23

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Demolishing R.B. work manually/ by mechanical means including cum stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Removal of old broken glass panes (any thickness or size, quality or description) from wooden frames, glazed with putty or fixed with beads.

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies

Centering and shuttering including strutting, propping etc Foundations, footings, bases of columns, etc. for sqm mass concrete

Plain cement concrete 1 :3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days

Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV levell.

Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing of marble stone flooring with 16 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with: Makrana white second quality

Providing and laying of marble chips skirting up to 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume Dark shade pigment with ordinary cement.

Providing and fixing of Kota stone 25mm thick slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand) :

Providing and fixing of Kota stone slabs 20 mm thick in risers of stepsskirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ceramic & Glazed tiles/ vitrified tiles/ of any size ofapproved make in floors / dados, laid in any pattern as specified over base of 3 mm thick adhesive of reputed brands as per IS specification 15477-2004 using 5 Kg. adhesive per sqm area of tiles and jointed with white cement slurry mixed with pigment to match the shade of tiles excluding cost of tiles

12 mm cement plaster of mix :1 :6 (1 cement: 6 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :1 :6 (1 cement: 6 fine sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement.

Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1 :3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1 :3 (1 cement : 3 fine sand) and finished neat: With common burnt clay non-modular brick tiles of class sqm designation 10

Filling available excavated earth (excluding rock) in trenches, cum plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Reinforced cement concrete work in beams, suspended floors, cum roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor four level, excluding the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement : 1.5 coarse sand(zone-111) : 3 graded stone aggregate 20 mm nominal size).

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade Hindi ( Matras commas and the like not to be measured and paid for Half letter shall be counted as half )

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade English and Roman (Hyphens not to be paid)

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300mmx16mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250mmx16mm

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing aluminium hanging floor door stopper, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. Complete Single rubber stopper

Providing and fixing aluminium handles 125mm, ISi marked, anodised (anodic coating not less than grade AC 1 O as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing & fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of Gasket I beading shall be paid as per respective item)

Providing gola 75x75 mm in cement concrete 1: 2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) as per standard design

Painting Lines, Dashes, Arrows etc on Roads in Two Coats on Old WorkPainting lines, dashes, arrows etc on roads in two coats on old work with ready mixed road marking paint conforming to IS: 164 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control Over 10 cm in width

Providing Concrete Curing compound of approved brand and as per direction of Er-in-charge.

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor four level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: 1 : 2: 4 ( 1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 20 mm nominal size) + Extra for work at height of 20 meter i.e. 6 floors (5 Storey and each storey of height 3.5 meter)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: 1 : 2: 4 ( 1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 20 mm nominal size) + Extra for work at height of 32 meter i.e. 9 floors (8 Storey and each storey of height 3.5 meter)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement-All work up to plinth level: 1 : 2: 4 ( 1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 20 mm nominal size) + Extra for work at height of 60 meter i.e. 17floors (16 Storey and each storey of height 3.5 meter)

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete.

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.

Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

Making suitable hole in the wall suitable for exhaust fan up to 450 mm sweep including finishing the same and fixing of Stainless steel wire mesh 2 mm thick having about 50 meshes per inch at exhaust side complete as required

Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up to 450 mm sweep etc complete as required

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.

Laying of first class ash brick laid in cement sand mortar 1:6 in foundation and plinth including loading, unloading, stacking, carriage within a lead of 4 KM.(Fly ash bricks to be provided by HPGCL)

Laying of first class ash brick laid in cement sand mortar 1:4 in in first storey upto 4 metres above plinth level including loading, unloading, stacking, carriage within a lead of 4 KM.(Fly ash bricks to be provided by HPGCL)

Providing & fixing of Hydraulic Door Closer ISI Mark of of 1st quality

Setting Right of Aluminium Door Single/double Leaf

Setting Right of Aluminium window leaf

Setting right of wooden door single leaf

Setting Right of Floor Spring for Aluminium Door

Providing & fixing of Short body SS coated/brass Pillar cock of Hindware, Perryware, Jacquar

Providing & fixing PVC Connection upto 2 feet of of 1st quality

Providing & fixing SS coated/brass Angle cock 15mm of Hindware, Perryware, Jacquar

Providing & fixing SS coated/brass Stop cock 15mm of Hindware, Perryware, Jacquar

Providing & fixing SS coated/brass CP Floor Jali of Hindware, Perryware, Jacquar, Prayag, Pearl, Jindal

Providing & fixing Looking Mirror bevelled type and size will be as per direction of Engineer-in-charge.

Providing & fixing Float valve 15mm for PVC cistern of Hindware, Perryware, Jacquar, Prayag, Pearl, Jindal

Providing & fixing PVC Float valve 25mm for water tank complete set of Hindware, Perryware, Jacquar, Prayag, Pearl, Jindal

Providing & fixing SS coated/brass Bib Cock 15mm of Hindware, Perryware, Jacquar, Prayag, Pearl, Jindal

Renewal of old Putty of glass panes

Providing & fixing of False Ceiling Tiles Armstrong (RH-99 Dune-ML) 600x600 i/c levelling &fixing alignment

Repair/ Setting right of Armstrong False Ceiling i/c alignment ,fixing & levelling.

Repair/ Setting right of Metal False Ceiling i/c alignment, fixing & levelling

Cleaning of Septic Tanks

Providing & fixing new Aluminium partition including door/sliding door, glass panes, plywood, tower bolts, handles, door closer, lock etc. as per the direction of Er.-In-Charge.

Repair/Setting right/Fixing of old Aluminium partition as the direction of Engineer-In-Charge.

Providing & fixing MS butt hinge

Replacing of Mortise Lock Knob Type

Providing & fixing ball for 25mm float valve of of Hindware, Prayag, Vectus, Jindal, Pearl

Providing & fixing PVC syphon handle for cistern of of 1st quality

Providing & fixing PVC syphon complete set of of 1st quality

Providing & fixing spindal washer of bib-cock of of 1st quality

Providing & fixing Brass ball valve/gate valve ½'' to 1” of Finolex, Ken, Diplast ,Supreme, UNIk ( ISI 1st Quality), Zolloto

Supplying and fixing of HDPE water storage tank Cover

Supply and fixing of PVC pipe 3" dia of Finolex, Ken, Diplast ,Supreme, UNIk ( ISI 1st Quality), Zolloto

Supply and fixing of PVC bend for 3" dia PVC pipe of Finolex, Ken, Diplast ,Supreme, UNIk ( ISI 1st Quality), Zolloto

Supply and fixing of PVC pipe 4" dia(4kg/cm²) of Finolex,Diplast ,Supreme, UNIk ( ISI 1st Quality), Zolloto, Prince

Supply and fixing of PVC bend for 4" dia PVC pipe of Finolex,Diplast ,Supreme, UNIk ( ISI 1st Quality), Zolloto, Prince

Removing of malba of civil structure/foundation/precast slab etc. including loading unloading, transporting with in lead of 5 km

Providing of poly bags and filling with earth and then placing in position as per direction of Engineer-in-charge.

Grouting of foundation bolts/ frame with shrink resistance compound/GP-2/ Shricom cement.

Cleaning of choked sewer line of any diameter

Applying Waterproofing Compound of required ratio of cement, sand and dr. fixit on rooftops

Providing and fixing Asbestos cement 6 MM sheet of reputed ISI mark.

Providing and fixing wall paneling (PVC)

Repair and setting right of vertical blinds

Providing & Fixing of urinal spreader

Providing & Fixing of multi purpose drawer lock

Repairing of drawer runner and channels

Providing & Fixing stainless steel track runner in drawer

Providing & Fixing of mosquito net over roshandan and windows

Providing & Fixing of fiber sheet 2 mm thick

Providing & Fixing of GI Roofing sheet

Providing & fixing of aluminium rubber gasket seal for windows/gates

Providing & fixing of aluminium beading for windows/gates

Supply and laying at site 53 mm to 22.4 mm size stone aggregate.

Providing & fixing of Curtain Rod

Providing & fixing of Latto

Providing & fixing vertical blind operation chain

Providing & fixing vertical blind bottom chain

Providing & fixing vertical blind plastic bottom weight

Welding work in angles, tees, flat, circular pipes, girders, rafter, purlins etc. as per direction of Engineer-in-charge.

Providing sketch of rise & fall of different locations using Levelling instruments such as dumpy level/total station as per direction of Engineer-in-charge.

Providing and fixing of Tee ¾” to 2" of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of Elbow ¾” to 2" of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of Socket ¾” to 2" of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of Brass elbow ¾”to 2” of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of Brass tee ¾”to 2" of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of Brass MT,FT ¾” to 1.5" of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of Union ¾” to 1.5" of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of PVC valve ¾” of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of Tee 4” of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing of Elbow 4” of Finolex/pryag/Ravindra/Ess-Ess/Prince make.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm Hindware/Perryware/Vectus or Ist qulaity

Paving of Fly ash Brick in different pattern i.e. basket wave pattern, drive way pattern, pinwheel pattern, herringbone 450 etc. including carriage within 3 Km loading, unloading, stacking and filling the joints in as per direction of Er-In-Charge (NS item) (Fly ash brick to be provided by HPGCL)

Providing & fixing GI Hex Nipple ½” to 2” of Ess Ess trend series, Finolex,Diplast ,Supreme, UNIk ( ISI 1st Quality)

Providing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.20 mm nominal bore, weighing not less than 40 gms.

Supplying C.P. Brass Extension Nipple (1/2"x2" size).

Supply of SS swan neck pillar cock

Providing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Supplying Waste Coupling of required size for kitchen sink of 1st quality (ISI mark/ approved brand).

Providing Carnival WC Seat Cover

Supply of flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings

Suuply of Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings of Prayag, Jindal, Pearl, Vectus, Aquaflux, Freshline, 1st quality (ISI mark/ approved brand)

Cleaning of terrace/loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.1 O per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia

Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia

Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia

Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia

Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5 mm inner dia

Providing Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia

Providing Coloured High density polyethylene / poly propylene 10 lit. (full flush) capacity controlled low level flushing cistern with fittings

Providing Vitreous china orrisa type W.C. pan of size 530mm to 580 mm of Hindware/Perryware/prayag/Kazaria/Vectus

Providing controlled flush, low level cistern made of vitreous china with all fittings complete 10 litre (full flush) capacity-white of Hindware/Perryware/Vectus/cera

Providing white vitreous china pedestal type (European type/ wash down type) water closet pan of Hindware/Perryware/prayag/Kazaria/Vectus

Providing seat cover nut PVC complete set of 1st quality

Providing spendle (Bib cock disc) of Finolex, Ken, Diplast ,Supreme, UNIk

Providing of Anti-termite liquid (Terminator)

Providing and fixing M-seal

Replacing of Flat back Urinal of 1st quality of specified size as per direction of Er-In-Charge

Providing of 19mm plywood board (ISI Mark)

Providing services of Skilled worker for attending various works as mentioned in scope of work attached as Annexure-A. Note:- Minimum one no. skilled worker to be deployed by the firm for carrying out the works as mentioned in scope of work attached as Annxure-A . In case of requirement at site, the firm must deploy additional skilled worker and they may be called in odd hours in case of emergency otherwise penalty will be imposed as mentioned in penalty clause of general terms & conditions.

Providing services of Unskilled workers for attending various works as mentioned in scope of work attached as Annexure-A.. Note:- Minimum three no. unskilled worker to be deployed by the firm for carrying out above said work. In case of requirement at site, the firm must deploy additional unskilled worker and they may be called in odd hours in case of emergency otherwise penalty will be imposed as mentioned in penalty clause of general terms & conditions.

Providing services of highly skilled worker which supervise all the civil construction & maintenance works in RGTPP plant as per direction of AE-in-charge & JE-in-charge for attending various civil works. Note:- Minimum one no. highly skilled worker to be deployed by the firm for carrying out above said work. In case of requirement at site, the firm must deploy additional supervisors and they may be called in odd hours in case of emergency otherwise penalty will be imposed as mentioned in penalty clause of general terms & conditions.

DEEP TECHNICA BUILT

SHREE RAM ENTERPRISES

Infinity Construction and Engineers