CERTAIN REPAIRS TO LEAKAGE SEEPAGE OF CHAJJAS SUNKEN SLAB AND APP MEMBRANE OF ACCESSIBLE NON ACCESSIBLE ROOF AT BANA SINGH VIHAR 4033 FD HOSP AND 1841 PINAKA REGT UNDER AGE BR I OF GE SUKNA

Amount

S&F in repairs structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1998 grade St.-240 complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws including taking down old GI / AC roof sheets complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd

All as per Sl item No. 2 above but plain steel sheet.

S&F 0.63 mm thick corrugated galvanised mild steel sheeting with two corrugation side lap, in roofs, walls etc, with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts including taking down old GI / AC roof sheets complete all as specified and directed. Make:- M/s National Roofings / M/s Shalini Roofing Pvt Ltd / Stellar Buildtech Pvt Ltd

S&F in repairs plain 0.63 mm thick galvanised, mild steel sheeting, in ridges, hips, lley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 omplete all as specified and directed. Make:- M/s National Roofings / M/s Shalini Roofing Pvt Ltd / Stellar Buildtech Pvt Ltd

M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheet and brick wall, thickness of concrete bed exc. 5 cm and not exc. 10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork complete all as specified and directed.

S&F 4 mm thick non asbestos fibre cement building boards (designer pattern) fixed or laid / inserted to aluminium framework with screws in false ceiling (flat or sloping) of grid size 605 x 605 mm and including anodised aluminium snap grid frame work for false ceiling hanging from structural steel / scantling with 6 mm GI wire & dismantling complete all as specified and directed. Make of boards:- Everest / Visaka Industries / Lafarge / Armstrong Make of aluminium snap grid:- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products

Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

All as per Sl item No 8 above but exc. 1.5 Sqm but not exc. 4.0 Sqm each

Taking down shutters of any description not exc 1.0 Sqm each complete all as specified and as directed.

All as per Sl item No 10 above but exc 1.0 Sqm but not exc 2.0 Sqm each

S&F 105 x 60 mm size pressed steel door frames for doors with one or more rebates and including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

All as per Sl item No 12 above but 125 x 60 mm size.

S&F 30 mm thick pre-laminated medium density fibre (MDF) board flush door shutter, both side laminated of approved colour, interior grade complete all as specified and directed. Make:- Greenply Industries Ltd. / Balaji Action Buildwell / Novapan / National / Kitply

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - A and complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing (SSR - 2020 Part-II Rates) complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

S&F factory made wire guazed (panel will be wire guazed in lieu of plain PVC sheet) PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails, bottom rails stiles & lock rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. The wire gauze shall be wrapped on an additional square 8 mm MS Solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd NOTE: Wire guaze shall be measured and paid separately.

S&F factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC Sheet Polyurethane painted on the front face & 2 mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc. complete all as specified and directed.

S&F steel window with side hung shutter and including box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

All as per Sl item No 21 above but without glazing bars

S&F steel ventilator with top hung shutter and including hinges steel peg stay complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples and including wooden beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington

All as per Sl item No. 27 above but figured glass, pin head type.

M&L for cutting holes in brick walls exc. half brick thick but not exc. one brick thick, built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts (depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repairs 100 mm mild steel handle, rotating type, suitable for side hung type steel window to lock the shutter complete all as specified and directed.

M&L running welding in repairs for thickness of metal to be welded not exc 6 mm complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F 100 mm butt hinge, medium weight, cold rolled mild steel complete all as specified and directed. Make:- M/s Mowjee / M/s Crown / M/s Everite / M/s Harrison

S&F 125 mm Aluminium handles cast type, anodised and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

All as per Sl. Item No. 35 above but 150 mm

S&F 125 mm long aluminium, anodised, barrel tower bolt of extruded section and fixed complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

All as per Sl. Item No. 37 above but 150 mm

M&L for tightening of loose sliding door bolt / handles / Barrel tower bolt or butt hinges including supply and fxing of screws all as directed.

S&F 300 mm, ordinary rat tail rod pattern springs and including roller and roller plate complete all as specified and directed.

S&F 65 mm (minimum) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F in repairs 18 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white laminated fixed with screw to timber / aluminium frame work complete all as specified and directed. Make:- Kitply / Bhutan Board / Novapan / Greenply

S&F in repairs 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed. Make :- M/s Archidply & Industries Ltd / M/s Sylvan Plyboard (India) Pvt. Ltd (Brand : Sylvan Ply) / M/s Jain Wood Industries (Brand Jayna)

S&F 3 mm thick cover fillets of standard hard board, 40 mm wide, and fixing with screws complete all as specified and directed.

S&F 100 mm hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. Make :- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repairs 20 mm dia curtain rod mild steel with decorative wooden finish complete all as specified and directed.

S&F decorative polished wooden brackets, supports for holding curtain rods or corners to be fixed at ends suitable for curtain rod of 20 mm dia with necessary screws complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in sunken portion and including demolition complete all as specified and directed.

M&L 10 mm thick rendering in CM 1:3 in sunken portion, using water proofing compound as per manufacturers instructions finished even and fair complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L PCC 1:5:10 type E-2, (using 40 mm graded crushed stone aggregate) as in sunken portion and including demolition complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in foundation, filling and mass concrete and including demolition complete all as specified and directed.

S&F 40 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf / cm2 and fixed complete to wall, ceiling or in floors etc complete all as specified and directed. Make:- Supreme / M/s Ori-Plast Limited / M/s SHK Polymers

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in CM 1:4 and dismantling complete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd

All as per Sl item No. 54 above but area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm.

All as per Sl item No 54 above but in skirting / dado etc. laid over and including rendering 10 mm thick in CM 1:3.

M&L coloured glazed ceramic tiles 300 x 450 x 7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 & dismantling complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Sanitaryware Pvt Ltd (First / Superfine quality) / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 15 mm thick screed bed in CM 1:4 and pointed in grey cement and pigments to match the colour of tile including dismantling complete all as specified and directed. Make : Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn

M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including demolition complete all as specified and directed.

M&L machine cut kota stone 20 mm (minimum) thick as in riser of steps, skirting, dado etc, laid over and including 15 mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the stone and including rubbing / grinding and polishing and dismantling complete all as specified and directed.

M&L 75 mm thick, PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc. including demolition complete all as specified and directed.

M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 including demolition complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and fair and including taking down complete all as specified and directed.

M&L 5 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, chajja, soffits etc, and finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement and including taking down complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed. Make:- Fosroc chemicals / STP Ltd / M/s Sika India Ltd / Hindcon Chemicals Limited / M/s IWL Limited

M&L preparation of new plastered wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L preparation of new plastered ceiling surfaces and inlcuding applying three coats of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M&L preparation of old decorated wall surfaces and including applying one coat of white wash complete all as specified and directed. Make :- Rajasthan / Apple / Surya

All as per Sl item No. 70 above but on ceiling surfaces.

M&L preparation of old decorated wall surfaces and including applying one coat of cement base paint complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over wall care putty (1 to 2 mm thick) to obtain smooth finish complete all as specified and directed. Make of oil bound distemper:- Bison (Berger) / Tractor (Asian) / ICI (Super Cote) Make of wall care putty:- Birla / Berger / J&N / Shalimar Paints / Asian Paints

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make:- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints

M&L preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and including applying one coat of synthetic enamel paint complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed. Make:- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 500 Litres capacity, multilayered (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia nipple suitable for HDPE water tank (minimum weight 45 gm), 20 mm bore ball valves (minimum weight 210 gm) high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe & locking with GI wire (to prevent monkey menace) to tank complete all as specified and directed. Make of tank:- Sintex / Polycon / Oriplast / Jindal Make of ball valve:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf

All as per Sl item No. 79 above but in repairs

All as per Sl item No. 79 above but in repairs and 1000 litres capacity

S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and directed. Make:- Prayag Cat No. 152 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf

All as per Sl item No. 82 above but 25 mm bore (minimum weight 455 grams) Make:- Prayag Cat No. 153 or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs 15 mm bore galvanised steel water tubing medium grade and including necessary GI fitting (such as bends, elbows, tees etc. and fixed to wall / ceiling or laid in / on floor complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd

All as per Sl item No 84 above but 20 mm bore.

All as per Sl item No. 84 above but 25 mm bore.

M&L cutting chases in brick wall, pinning in. making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc. 10 cm girth complete all as specified and directed.

S&F in repairs 15 mm bore bib tap chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs 15 mm bore bib taps, long body chromium plated, fancy type, cast copper alloy with crutch or butterfly handle and wall flange, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs pillar tap 15 mm bore, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered “hot" or “cold” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs 15 mm bore fancy type, chromium plated, stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed. Make:- Essco, Cat No- SQT-513BKN or equivalent in Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs 15 mm bore fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs angle stop cock 15 mm bore, cast copper alloy, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or unions and fixed, fancy type, chromium plated long thread with flange complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs 100 mm size swivel shower rose of ABS, chromium plated with long head arm for fixing with 15 mm pipe complete all as specified and directed. Make:- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs towel rail 20 mm dia & 600 mm long of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleat complete all as specified and directed. Make:- Prayag, Cat No. - BA-01 or equivalent in Essco / Hindware (Less Italian Collection) / Cera (Med Range)

S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, & side not less than 300mm with ABS chromium plate bracket guard complete all as specified and directed. Make:- Prayag, Cat No. - BEA-46 or equivalent in Essco / Hindware (Less Italian Collection) / Cera (Med Range)

S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Kirloskar / Leader / Zoloto / Venus / Audco / Upadhyaya

S&F in repairs vitreous china squatting pan, "Orissa pattern" white, size 580 x 440 mm with integral foot rest, 'P' or 'S' trap and excluding connection to trap and to flushing pipe, CI anti -syphonage pipe complete all as specified and directed. Make:- Hindware / Cera (Med Range) / Essco

S&F in repairs 15 mm bore jet spray (butterfly type) steel body, with and including 1.0 m PVC tube complete all as specified and directed. Make :- Essco / Hindware (Less Italian Collection) / Cera (Med Range) / Prayag (7000 & 8000 Series)

S&F in repairs plastic water closet seat cover white, closed pattern with flat bottom and cover and mild steel CP hinges for Anglo-Indian / universal type pan complete all as specified and directed. Make:- Hindware (Less Italian Collection) / Cera (Med Range) / Essco

S&F in repairs PVC low level flushing cistern of 10 litres capacity, valve less, syphonic action type, white body, with inlet ball valve, float and handle including brackets & 32 mm dia PVC flush bend pipe complete all as specified and directed. Make of Cistern:- Hindware, Model - Sleek Essence Single Flush (Starwhite) or equivalent in Cera (Med Range) / Essco Make of Bend Pipe:- Hindware (Less Italian Collection) / Cera (Med Range) / Essco

S&F in repairs vitreous china wash hand basin white flat back of size not less than 550 x 400 mm with and including PVC waste pipe 32 mm bore, CP waste fitting and cutting for and pinning in ends of brackets etc, complete all as specified and directed. Make of wash hand basin:- Hindware / Cera (Med Range) / Essco Make of waste fitting - Prayag Cat No.- BEA-10 or equivalent in Essco / Hindware (Less Italian Collection ) / Cera (Med Range) Make of PVC waste pipe - Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs waste fitting 32 mm bore, brass, chromium plated for basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. Make :- Prayag Cat No.- BEA-10 or equivalent in Essco / Hindware (Less Italian Collection ) / Cera (Med Range)

S&F in repairs kitchen plate rack made out of 0.63 mm stainless steel sheet & of size not less than 31" x 30" x 10", standard quality fixed with brass screw complete all as specified and directed. Make:- M/s Bluestar Sanitary Industries Pvt Ltd / M/s Prabhat Sanitary Pvt Ltd (Brand IDOOS) / M/s JMD International (Brand D-sons)

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 405 x 355 x 178 mm complete all as specified and directed. Make:- M/s Bluestar Sanitary Industries Pvt Ltd / M/s Prabhat Sanitary Pvt Ltd (Brand IDOOS) / M/s JMD International (Brand D-sons)

S&F in repairs soap dish PTMT fixed to plugs with chromium plated brass screws complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs PVC connections 15 mm size with PTMT nuts, of length 600 mm complete all as specified and directed. Make:- Prayag Cat No.- 324-TK or equivalent in M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs PVC (SWR) gully trap of 125 / 110 mm, setting and jointing with solvent cement and including top cover complete all as specified and directed. Make:- Supreme / M/s Fusion Industries Ltd / M/s Skipper Ltd / M/s HIL Limited

S&F grating doom 100 mm dia of PTMT (minimum weight 25 gms) fixed to floor trap complete all as specified and directed. Make:- Prayag / M/s Pearl Precision Products Pvt Ltd / Polytuf

S&F in repairs 75 mm bore, cast iron soil, waste and vent pipe (sand cast) in any length with or without ears, jointed with cement joints, fixed to walls complete all as specified and directed. Make :- Electro steel / BIC / PIC

All as per Sl item No. 111 above but 100 mm bore.

S&F 75 mm bore, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured), fitted with oval access doors complete all as specified and directed.

All as per Sl item No 113 above but 100 mm bore.

S&F 75 mm bore, cast Iron bend (any radius), diminishing pieces or tapers (larger bore measured), fitted with oval access doors complete all as specified and directed.

All as per Sl item No 115 above but 100 mm bore.

S&F 100 mm bore cast iron vent cowl complete all as specified and directed.

S&F cast Iron branch piece suitable for 75 mm bore CI Pipe, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval access doors complete all as specified and directed.

All as per Sl item No 118 above but 100 mm bore.

S&F 100 mm bore cast iron floor traps with grating and including jointing to CI pipe with run lead joints fixed including necessary cement concrete 1:2:4, type B-1 complete all as specified and as directed.

S&F stack clamps for 75 mm bore pipes made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, and including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

All as per Sl item No 121 above but 100 mm bore.

M&L making good broken / damaged RCC chajjas with PCC 1:2:4 type B1 or cement mortar 1:3 and including rendering 15 mm thick in CM 1:4 mixed with water proofing compound as per manufacturer's instruction to top, sides and soffits, including necessary scaffolding, formwork upto 3 storey height complete all as specified and directed. Note:- Water proofing compound shall be measured and paid seperately

M&L 75 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, including demolition complete all as specified and directed.

M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork & demoliton complete all as specified and directed.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete including demolition complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary forms, moulds etc. & demoliton complete all as specified and as directed.

Cutting of the shrubs, plants and bushes etc. of any description and any girth and taking out roots from the wall or roofs / chajjas and making good disturbed portion with PCC 1:2:4 type B-0 or cement mortar (1:3) complete all as directed.

M&L for roof treatment in order of precedence as given below complete all as specified and as directed:- (i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm. (ii) 15 mm thick screed bed in CM 1:4 on surface. (iii) Cleaning of plastered surface and applying one coat of bituminous primer @ 0.40 Ltr / Sqm. (Contd...)

(iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.60 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (v) Applying one coat of water proofing paint with aluminium finish over APP as per manufacturer's instruction. Note :- (a) Bituminous primer shall be "ShaliTex Primer" manufactured by M/s STP Ltd or equivalent in M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited (b) Laying APP based polymeric membrane shall be done by torch on method as per manufactures instructions. (c) A minimum overlap of 100 mm and 75 mm should be made at the end and sides of the polymeric membrane respectively and all overlaps and joints shall be sealed as per manufacturers instruction. (d) APP based polymeric membrane shall be “SUPER THERMOLAY” manufactured by M/s STP Ltd or “WP Shield” manufactured by M/s Sika India Pvt Ltd or equivalent of M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited (e) Water proofing paint shall be by M/s STP Ltd or M/s Sika India Pvt Ltd or M/s Fosroc Chemicals or M/s Hindcon chemicals limited or M/s IWL India Limited

S D CONSTRUCTION CO

Shri U K Ghosh

M/s TALCO

SHRI JAYANTA GHOSH

SHANTI UDYOG