MAINT AND REPAIR/REPLACEMENT OF UNSERVICEABLE WIRING MCBs, MCCBs, DBs, LIGHTS, SUMMER AND WINTER APPLIANCES AT TARAPORE ENCLAVE MD ACCN UNDER AGE E/M OF GE SOUTH DELHI CANTT-10

Amount

Taking down copper point wiring (fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made 2mm thick Steel Boxes suitable for modular switch/sockets including modular plates of suitable size as per site requiremnt complete all as specified and as directed for the following:- Note:Cutting & chashing required shall be deemed to be included in the quoted rates. (a) One light/ceiling fan/exhaust fan point controlled by one way switch 6 amps.

All as per Srl item No 2.00 here-in-before, but One light/ceiling fan/exhaust fan point controlled by Two way switch 6 amps.

All as per Srl item No 2.00 here-in-before, but One bell/buzzer point controlled by one bell push

All as per Srl item No 2.00 here-in-before, but point wiring with 1.5 Sqmm single core copper cable and earth continuity wire with 1.5 Sqmm single core cable for one three pin 6 amp socket outlet point on independent board complete all as specified and as directed.

All as per Srl item No 2.00 here-in-before, but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 6/16 amp socket outlet point on independent board complete all as specified and as directed.

All as per Srl item No 2.00 here-in-before, but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core cable on independent circuit complete all as specified and as directed.

M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing PVC conduit of suitable sizes of medium grade ISI marked for surface/concealed wiring and its accessories, including MS sunken box and hylem sheet of suitable size, ISI marked for housing the switches and sockets complete all as specified and as directed for the following :- (a) One light/ceiling fan/exhaust fan point controlled by one way switch 6 amps.

All as per Srl item No 8.00 here-in-before, but with 1.5 sqmm (for phase, neutral) and 1.5 sqmm (for continuous earth wire) cable for one 5 amp socket out let point on independent board

S&F submain wiring alongwith earth wire with 5 run of 10 Sqmm (03 run for phase and 01 run for neutral) and one run of 10 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through existing rigid PVC conduit with all fittings accessories complete all as specified and as directed. Note : 03 run of phase, one run for neutral & one run of earth wire will be measured as one length for the payment purpose.

S&F modular switch 6 amps 01 Module 240 V AC one way with ISI mark complete all as specified and as directed.

S&F modular switch 6 amps 01 Module 240 V AC Two way with ISI mark complete all as specified and as directed.

S&F modular switch 16 A SP one way 01 Module 240 volts complete all as specified and as directed.

S&F modular socket 6 A Multi socket for 2 pin and 3 pin 02 Module 240 volts complete all as specified and as directed.

S&F modular socket outlet 16 A-2/3 pin combined 02 Module 240 volts complete all as specified and as directed.

S&F modular bell push 6A with Neon 1 module 240 volts complete all as specified and as directed.

S&F electronic fan regulator modular Dimmer type 400Watt step type 02 Module as per existing complete all as specified and as directed.

S&F switch piano flush button single pole one way 6 amps complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and as directed.

S&F in repair dimmer /step type electronic fan regulator flush type 230 volts complete all as specified and as directed.

S&F electric bell ding-dong AC 230 Volt complete all as specified and as directed.

S&F ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and as directed.

S&F in repair modular switch 6 amps 01 Module 240 V AC one way with ISI mark complete all as specified and as directed.

S&F in repair modular switch 6 amps 01 Module 240 V AC Two way with ISI mark complete all as specified and as directed.

S&F in repair modular switch 16 A SP one way 01 Module 240 volts complete all as specified and as directed.

S&F in repair modular socket 6 A Multi socket for 2 pin and 3 pin 02 Module 240 volts complete all as specified and as directed.

S&F in repair modular socket outlet 16 A-2/3 pin combined 02 Module 240 volts complete all as specified and as directed.

S&F in repair modular bell push 6A with Neon 1 module 240 volts complete all as specified and as directed.

S&F in repair switch piano flush button single pole one way 6 amps complete all as specified and as directed.

S&F in repair switch piano flush type 15 amps single pole one way complete all as specified and as directed.

S&F in repair socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and as directed.

Taking down DB of SPN/TPN 4/8 way type removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls etc. complete all as specified and as directed.

S&F MCB DB SPN 8 Way double door pre wired type, (IP 43 Protection) CRCA 1.6 mm, 100 Amp complete all as specified and as directed.

S&F distribution board vertical triple pole and neutral 4 way, double door for fixing MCB upto 63 Amps as incommer and MCBs as out goings with metal door and IP 43 Protections and connecting, in replacement complete all as specified and as directed.

Taking down MCB any type removing and materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls etc. complete all as specified and as directed.

S&F MCB SP 06 to 32 Amps 240 Volts, 10 KA, `C' curve, all as per site requirement including taking down MCB any type removing and materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls etc. complete all as specified and as directed.

S&F MCB TPN 4P from 63 Amps 415 volts, 'C' Series 10 KA as per site requirement including taking down MCB any type removing and materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls etc. complete all as specified and as directed.

S&F in repair Modular AC Box with socket and MCB SP 20 Amp complete with white colour plate and frame complete all as specified and directed.

S&F in repairs Metal clad enclosure with plug and socket 20 Amp with one MCB single pole, 25 Amps 240 volts complete all as specified and as directed.

Supply and fix in repair of LED surface mounted Batten light 20 W 4 feet of Powder coated die cast /Extruded aluminium Body (Thickness >1.20 mm) and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD< 10% , P. F. ≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). ManufacturesWord Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEMmust have its own in house NABL lab setup for all testing facilities forLED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc.as required. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report from NABL lab forall testing required for LED fixtures as per BIS shall be submitted. Shapesize and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housingsuch that LED junction temperature shall not rise above 90°C). complete all as specified and as directed.

Supply and fix in repair of LED surface mounted Batten light 10 W 2 feet of Powder coated die cast /Extruded aluminium Body (Thickness >1.20 mm) and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD< 10% , P. F.≥0.95, IP20, CRI >80 , Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends,CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc.as required. System lumen efficacy ≥120 and <135 lm/Watt outputt . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shapesize and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C), complete all as specified and as directed.

S&F in repairs aesthetically designed circular shaped surface mounted LED light of 12 W fixture with PMMA diffuser to give glare free light including suitable LED lamp of 12 W having dimenstion dia of 300mm and height 92 mm complete all as specified and as directed.

S&F in repairs Surface mounting not less than 36 Watt 1'x4' flat LED panel fitting luminaire to enhance the delight of occupants with comfortable experience through its classic design and glare & Flicker free illumination. White powder coated CRCA housing with seamless front frame with flat non-yellowish diffuser to fix in ceiling and get electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and as directed.

S&F in repair decorative wall-mounted light fitting, body made of die-cast aluminum with powder-coated finish and frosted/clear glass/acrylic diffuser, suitable for holding LED lamp up to 12 Watt (B22 base), IP20 or higher protection, complete with all accessories for mounting on wall surface including screws, plugs, etc. Connected with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required from ceiling rose/DB, complete all as specified and directed.

S&F in repair LED bulkhead light fitting, 10 Watt, white colour, housing made of high-grade flame-retardant engineering plastic with clear prismatic diffuser, suitable for wall or ceiling surface mounting. The fitting will be provided with replaceable LED lamp (cool white) and include all required mounting accessories.Connected with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required from ceiling rose, complete all as specified and directed.

S&F in replacement of lamp holder Angle/ Batten type bakelite insulated body with back plate all as specified and directed.

S&F in repairs decorative laminated sheet 3mm thick of size 8'' X 5'' including necessary cutting of sheet for fixing switch/socket complete all as specified and as directed.

S&F in repairs decorative laminated sheet 3mm thick of size 11'' X 9'' including necessary cutting of sheet for fixing switch/socket complete all as specified and as directed.

S&F in repairs fan capacitor 1.5 Mfd capacity complete all as specified and as directed.

S&F in repairs fan capacitor 2.5 Mfd capacity complete all as specified and as directed.

S&F in repairs non metallic rigid PVC conduit medium grade 20 mm dia, ISI Mark complete all as specified and as directed.

M&L for comprehensive maint of ceiling, exhaust fan of Md accn including proper checking of base connection, lock pin of U clamp fan blade, serviceability of down rod, gun metal bush, shaft, stater, ring, ceiling fan outer body, exhaust fan blade, body and capacitor where ever required complete with greasing/lubrication and cleaning of fan bearing complete all as specified and as directed. Note :- 1. All material required/spare parts shall be measured and paid separately against 'supply only' under respective item of BoQ. 2. The rated quoted by the contractor deemed to be including taking down of ceilingfan/exhaust fan, transportation to workshop for rewinding or machining work, and refixing the same after repair.

M&L for rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaningand winding with supper enameled copper wire of superior quality of same gauge, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan complete all as specified and as directed.

All as per Srl item No 52.00 here-in-before, but exhaust fan 230/300 mm sweep.

All as per Srl item No 52.00 here-in-before, but wall fan 450 mm sweep

Supply only Ceiling fan Blades (set of 3 ) white in color for 1200mm sweep complete all as specified and directed by Engr in charge

Supply only replacing 'U' clamps with rubber reel, bolts, nuts, washers and safety pin ceiling fan of any size/make complete all as specified and as directed.

Supply only for Down rod of 450 mm long fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white paint complete all as specified and as directed.

Supply only of Canopy of Celing fans of 1200 sweep size heavy duty duly painted with one coat of white paint complete all as specified and as directed.

S&F in repair LED bulb 12 Watt LED Bulb complete all as specified and directed.

Supply only of single phase inducation motor AC 230V, 1300 RPM copper wounded suitable for fresh air fan 200mm sweep as per sample complete all as specified and as directed.

Supply only repairs of single phase inducation motor AC 230V, 1350 RPM copper wounded suitable for fresh air fan 300mm sweep as per sample complete all as specified and as directed.

Supply only in repairs of single phase inducation motor AC 230V, 1400 RPM copper wounded suitable for wall mount fan upto 450 mm sweep as per sample complete all as specified and as directed.

Supply only of exhaust fan iron blades for size 200/300 mm sweep as per sample complete all as specified and as directed.

Supply only wall fan blades for size upto 450 mm sweep as per sample complete all as specified and as directed.

Supply only full body frame of exhaust/ fresh air fan/wall fan of 230/300/450mm sweep complete all as specified and direceted by Engr in charge.

Supply only electric BLDC fan controller PCB with short circuit protection power 240V with suitable for BLDC ceiling fan 1200mm sweep as per site model complete all as specified and as directed.

S&F in repairs MCCB, 3 pole, 415 volt of capacity not less than 250 Amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc.including taking down of old unsv MCCBs complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanised iron strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC 1:2:4, type B-1, using 20 mm graded stone aggregate with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance n.exc 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to Transformer/Poles all as specified or indicated including testing complete all as specified and as directed.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing/connecting as required 25x4 mm galvanised iron strip complete all as specified and as directed.

M&L for Fabrication of aluminium frame opening cover suitable for exhaust fan 450 mm sweep opening with wiremesh sliding window including opening of hole through out the wall as suitable for exhaust fan of size 450 mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making good the disturbed surface and all as per site requirement complete all as specified and as directed. Notes : (i) The quoted rates are inclusive for making hole opening civil work with MS fastner bolt of 8mm dia and 100 mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5 mm thick (min) to hold exhaust fan. (ii) Staircase/scaffolding arrangement for fixing of frame with wiremesh sliding window up to third floor shall be arranged by the contractor and rates for the same deemed to be included in the quoted rate.

Supply and fixing in replacement of PVC insulated FRLS single core with stranded copper cable of size 4 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fixing in replacement of PVC insulated FRLS single core with stranded copper cable of size 1.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fixing in replacement of PVC insulated FRLS single core with stranded copper cable of size 2.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fixing in replacement of PVC insulated FRLS 3 core with stranded copper cable of size 2.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fixing in replacement of PVC insulated FRLS 2 core with stranded copper cable of size 1.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supplying and fixing smart three phase four wire dual source prepaid energy meters BIS 15884 marked in existing meter board/flor panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 415 Volt accuracy class 1.0 alongwith paralled home display split unit with cable and connector with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition, complete all as specified and as directed. Note: Meter Should work on MES Delhi Cantt Server

S&F Home display for pre paid meter complete all as specified and as directed.

PARAS ENTERPRISES (BID ID -3417951)

Vijeta Solutions (BID ID -3416528)

Chaudhary Constructions (BID ID -3415749)

J V ENGINEERS / JAI SINGH (BID ID -3416389)

M/S HARINDER SINGH (BID ID -3417474)

Vee em Traders (BID ID -3418036)

J B ELECTRICALS (BID ID -3417331)