CA NO GE U(N) 02 2022 2023 REPAIR REPLACEMENT OF BER GEYSERS AT VARIOUS LOCATIONS RENOVATION OF BATHROOM AND SANITARY FITTINGS IN B NO P3 AND PROVISION OF CHAIN LINK FENCING WITH WICKET GATE UNDER GE(N) UDHAMPUR

Amount

M&L for taking down cement plaster of any description on bricks, PCC block or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charge

M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge

M&L for 15 mm (10+5) thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as specified and directed by Engr-in-charge

M&L for two coat of cement base paint over newly plastered surfaces of wall including preparing surfaces complete all as specified and directed by Engr-in-charge

M&L for preparing newly plastered surfaces of walls and applying two coat of oil bound distemper over one coat of 2mm wall care puttycomplete all as specified and directed by Engr-in-charge

M&L for taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified.

All as per item no 06 above but exceeding 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed by Engr-in-charge

M&L for steel windows or ventilators,fixed type,with glazing bars,including a shop coat red oxide of zinc chrome primer, all as specified.

M&L for factory Made Solid PVC Moulded (decorative type) Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-charge

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain wood grain printed PVC sheet reinforced with M.S. Square tube,complete all as specified and directed by Engr-in-charge

M&L for dismantling of floor hearth or wall tiling incl CM, bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge

S&F Glazed ceramic tiles (coloured) on vertical surfaces 450x300x6 to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick rendering CM (1:3) all as specified & directed by Engr-In-Charge.

M&L for non skid coloured glazed ceramic tiles area of each tile exc. .11 sqm but n.exc. 18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed of cement mortar(1:4) all as specified & Directed by Engr-in-Charge.

M&L for coloured vitrifired ceramic tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sq.m (min. size 600mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for coloured vitrifired ceramic tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sq.m as in skirting, etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 10mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, all as specified .

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1.6 complete all as specified and directed by Engr-in-charge

S&F in repair Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I,capacity of water tank 1000 Ltr complete all as specified and directed by Engr-in-charge

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc.and making good, cutting not exc 10 cm grith complete all as specified and directed by Engr-in-charge

S&F ball brass valves 20mm , high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule & fixed complete all as specified and directed by Engr-in-charge

M&L for taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mmdiacomplete all as specified and directed by Engr-in-charge.

M&L for taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia complete all as specified and directed by Engr-in-charge

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore all as specified.

S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 20mm bore all as specified.

S&F powder coated Anodised Aluminium door air tight of anodised frame made of size 100 mm x 45mm of section thickness -1.50 mm thick with one or more rebates including jointing cleats etc for fixing aluminium anodised door shutter fully panelled (two no of panels on each shutter) with 5.5 mm thick tinted glass as in panels shutter rail made of 80mm x45 mm of sheet thickness 1.50 mm (Top and bottom rails and stiles) single /double leaf side hung type including necessary jointing cleats /anodised aluminium fillets/ glazing clips with rubber gasket ,with aluminium fittings such as aluminium anodised tower bolt 200mm long 03 No for each door, aluminium anodised bow handles 150 mm 'D' type 02 nos for each shutter , mortice locks 6 lever make - harrison one on each door, door shutter mounted on bottom double action floor spring hydrailically regulated made up of 1.25mm thick aluminium alloy sheet foundation box , main body with stainless steel cover , governing mild steel heavy duty and door shutter top mounted on aluminium alloy pivot. -01 No on each shutter , bottom and floor stoppers, Complete all as specified. Note : All fitting shall be of ISI marked except cleats ) sizes of each door shall be as per site requirement all as directed and specified .

S&F powder coated Aluminium window air tight of anodised frame made of size 100mm x 45mm of section thickness-1.50mm thick and shutter stiles made of section 80mm x 45mm x 1.5mm thick with or without rebates, with 5.5mm thick tinted glass fixed with aluminium beads, including necessary jointing cleats/anodised aluminium fillets/alluminium glazing clips with rubber gasket, with aluminium fittings such as aluminium butt hinges 100mm long 03 Nos, aluminium anodised tower bolt 100mm long 02 No, aluminium anodised bow handles 100mm 01 No, aluminium hook and eye 150mm 01 No in each shutterm including aluminium grill of 5 to 6 dia, size of mesh not exc 7.5cm in either direction, as approved by GE, complete all as specified. Note:- All fitting shall be of ISI marked except cleats ) sizes of each shutter shall be as per site requirement all as directed and specified .

S&F MS powder coated curtain rods with bracket fixed to wall with suitable screws and onion type end brackets all as per approved design/colour/pattern fixed as directed in Engr-in-Charge.

M&L for priming the roof surface with bitumenous primer @ 0.3 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm all as specified and as directed by Engr-in Charge.

M&L apply two coats of aluminium paint on roof complete all as specified and directed by Engr-in-charge

M&L for water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m),(e) M&L for PCC 1:7 :12 for filling of sunken portion after conceling all menbrane and sealing all joints to the entire with broken bats and light weight all as satisfaction of Engineer-in-Charge.

S&F vitreous china,white, wash hand basin, flat back of size 550x400mm, white including MS brackets and pedestal pattern including cutting for and pinning including 32mm dia CP brass waste coupling and PVC waste pipe, complete all as specified.Make-CERA cat part No. 1008 (Cornet) for WHB & for pedestal cat part No.1108, Jaquar- SLS-WHT-0611F for WHB and SLS-WHT-1510 for pedestal or equivalent of any approved make as approved by GE.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and as directed by Eng-in-charge.

S&F in repairs Soap dish, Vitreous China white, approximate size 160x160x90mm complete all as specified and as directed by Eng-in-charge.

S&F toilet paper holder, vitreous China colour, box type to walls with CP (CP) brass screws complete all as specified and as directed by Eng-in-charge.

S&F towel rail 600mm long of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 190gms) complete all as specified and as directed by Eng-in-charge.

S&F bib taps 15 mm bore fancy type, fixed in repairs, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Eng-in-charge.

S&F stop valves 15 mm bore fixed in repair fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Eng-in-charge.

S&F brass CP mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin with wall flange complete all as specified and directed.

S&F vitreious china wash down water closet pedestral pattern bowl for coupled WC with UF soft close seat cover, hinges,fixing acceso set with connected flushing cistern with systenm fittings single peice with "P" or 'S' Trap with PP seal cover hinges accessories and all fittings including making connection fixed in repairs complete all as specified and as directed by Eng-in-charge.

M&L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,in any type of soil complete all as specified and as directed by Eng-in-charge.

M&L for PCC (1:4:8) Type D-2 (using 40 mm graded stone aggregate) as in foundations, fillings and mass concrete thick complete all as specified and as directed by Eng-in-charge.

S&F Joist, channel, angle, or tee sections, fixed independently(Fe- 290 (Gde E- 165)) without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed by Eng-in-charge.

Supply only Chain link mild steel galvanisd fencing, (mesh size 75mmX75mm 4mmdia of wire )complete all as specified and as directed by Eng-in-charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire only complete all as specified and as directed by Eng-in-charge.

M&L for holes drilled up to 12mm dia (and countersunk, if required) depth of holes exc 3mm but nexc 12mm complete all as specified and as directed by Eng-in-charge.

M&L for mild steel screw bolts (machine made) 5 to 10mm neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed by Eng-in-charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Eng-in-charge.

S&F galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed by Eng-in-charge.(Each line wire to be measured)

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) complete all as specified and as directed by Eng-in-charge.

M&L for excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m deep in any type of soil for any stipulated work and for laying of cables all as per specified and directred.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Eng-in-charge

M&L for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregates as in seismic and other similar bands, plinth courses, string courses, lacing Courses, parapets and railings upto 60 cm in height, copings, the like including weathering, slightly rounded or chamfered angles and throating, as directed complete, all as specified.

M&L for painting new or previously untreated steel or iron surfaces incl preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer all as spd & dir.

Taking down carefully point wiring copper/aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regtulators sockets etc tobe measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as specified and as directed.

M&L for point wring for one light/ceiling fan controlled by one switch with 1.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including sutiable new steel sunken boxes,modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting,chasing the surface and then making good the same in CM 1:3 complete all as specified and directed. (a) One light point /bell point controlled by one switch .

One 3/5 pin socket outlet, 5 Amp independent

One socket outlet 3 Pin, 5 Amps, SP on same board.

All as per item No. 56 above but one power point controlled by 01 Nos one way switch 15 Amp with 2x2.5 sqmm cable alongwith 01 x 2.5sqmm Earth wire complete all as specified and as directed.

All as per item No 56 above but for one light point controlled by two 2-way switches, with cables 1.5 sq. mm size complete all as specified and as directed by Eng-in-charge

Supply and fixing in replacement modular switch single pole one way 10Amps 1 module complete all as specified and directed

Supply and fixing inreplacement modular switch single pole one way 16 Amps 1 module complete all as specified and directed

S&F Moduler switch Piano flush type single pole 5 Amps two way, all as specified and directed .

Supply and fixing in replacement modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing in replacement modular Bell push 6 amp 01 module complete all as specified and directed.

Supply and fixing in replacement modular socket 6 /16 Amps 2/3 pin flush type complete.

Supply and fixing in replacement of ceiling rose.3 face/PVC/polycarbonate,isolated body all as specified and directed.

Supply and fixing in replacement modular electronic fan regulator, step type, two module 60 watt 230 volt and making all necessary connections complete all as specified and directed.

Supply and fixing bell ding dong AC 23Volts single pole all as specified and as directed by engineer in charge

Supply and fixing ceiling fans complete with blades, down rods, without fan regulator and accessories, 230 V, 1200 mm sweep,ISI marked, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing Exhaust fans steel body,AC ingle phase 230 volts of size 300 mm sweep with blades and frame and louver complete all as specified and directed

Taking down old serviceable LED lighting fixture 4/5W, 10/12W , 18/20W and Bulk Head fiiting 9/10W from existing position carefully for refixing including making good to disturbed surfaces complete all as specified and directed

Refixing of existing Slim linear LED lighting fixture 20 Watt LED batten, P.F greater than 0.9, input voltage range from 90 Volts to 280Volts with full base of polycarbonate extruded section acting as a heat sink with closed back isolated driver complete making all connection using 1.5sqmm copper conductor multistranded PVC insulated 2 core flexible cable with from ceiling rose to fitting complete all as specified and as directed by engineer in charge.

S&F in replacement Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge.

Refixing of existing decorative ultra slim linear Aluminium Extruded LED lighting fixture 10/12 Watt LED of input voltage AC 220V-240V, 50 Hz with colour tempetrature 6500K more than 1080 lumens of IP 20 complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated twin core flexible cable from ceilingrose to fitting complete all as per directed by Engr-in-charge.

S&F in replacement E-Lite LED Curve lighting fixture 10/12 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge..

Refixing of existing Slim linear LED lighting fixture 4/5W watt LED batten, with full base of extruded poly carbonate isolated driver, complete making all connection from ceiling rose to fittings including testing complete all as per the direction of Engr-in-Charge.

S&F in replacement E-Lite LED Curve lighting fixture 05 watt LED batten, with full base of extruded polycarbonate body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete all as per the direction of Engr-in-Charge.

S&F in replacement security (street) light fitting 35 watt, new generation energy saving & environmental friendly long life versatile pressure die cost aluminium IP 66 with acylic, powder coated, pressure die cast aluminium compact high power LED street light with heat resistant toughed glass, corrosion resistant, isolated driver, including provision of GI tubing bracket of suitable size and fixed on wall including clamps, nut, bolts and washer for fixing of security (street) light complete all as per direction of Engr-in-Charge.

M&L in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6 Sqmm PVC FRLS ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 6.00 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly complete all as specified and as directed by Eng-in-charge

S&F sub main wiring with 2 single core PVC insulated FRLS unsheathed stranded copper conductor cable of Size 4 Sqmm with and including PVC concealed conduit "ISI" marked with all fittings and accessories and one single core PVC insulated FRLS single core stranded copper conductor cable 4.0 sqmm as contineous earth wire and connected to earth dolly all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below Normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following:- (a) Test point GI wire 4mm dia . (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

M & L for replacement of DB0Xx MCB protected socket with sheet steel enclosure complete WITH MCB SP 20 Amp of Make Havells Cat No DHDMCSN0251025 equivalent to Havells/ Schnieder complete all as specified and directed by Engr-in-charge

Supply and fixing 4mm dia GI wire as earth continuty conductor or main earth strip fix to wall on batten or recess or chess or burrid in ground or any other indicated situation for loop earthing etc all as specified and directed by Engr-in-charge

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways all as specified and directed by Engr-in-charge

S&F 'C' series SPN MCB 40 to 63Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc all as specified and directed by Engr-in-charge

S&F 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc complete all as specified and as directed by Eng-in-charge

S & F sheet metal VTPN DBs - DPX3 160 MCCB DBs 04 way (DPX3 160+ 12) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge

S & F DPX3 thermal magnetic MCCB 4 pole 100 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT complete all as specified and directed by Engr-in-charge

Taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and painting with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm complete all as directed by Engr-in-Charge.

Supply and fixing of Rigid non metallic PVC conduit medium grade, 25 mm dia (external) inclusive of all fittings such as tees, bends, elbow, reducers,Junction box, with modular sheet cover, bell mouth tube ends etc and all fixing accessories such as couples, bolts, nuts, saddles, pipe hooks etc including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified and directed. (For Telephone wiring)

Supply and lay in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as specified and as directed by Eng-in-charge

M&L for returning filling in including spreading leveling watering and well ramming 25cm in thickness in any type of soil complete all as specified and as directed by Eng-in-charge

M&L for removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed by Eng-in-charge

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt complete all as specified and as directed by Eng-in-charge

M&L GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia complete all as specified and directed by Engr-in-charge

Supply and fix on load change over switch 4 pole 415 V in sheet metal enclosure 4 pole of capacity 100 Amp complete all as specified and directed by Engr-in-charge

Supply and install geyser 25 Ltrs capacity Vertical, type, steel body, stainless steel tank, high efficiency long life copper heating element, Alluring desined, shock resistant ABS outer body, IPX waterproof technology, multiple safety system, fire retardant cable, tank designed to withstand high presure rating suitable to operate in Single phase AC supply, 230 volts 50 Hz including grouting suitable size of 04 Nos fastner bolts on the wall and making all electric and water supply connections properly as per site requirement complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement PVC Connection Pipe for cold water connection suitable for working temp not less than 90 degree Centigrage complete with check nut and washer in both side, Size 450mm long, 15mm dia and making connection to inlet of electric water heater of 25 Ltr capacity complete all as specified and directed by Engr-in-charge

Supply and fixing in replacement Connection Pipe of stainless teel 304 grade for Hot water connection suitable for working temp of not less than 90 degree Centigrage complete with check nut and washer in both sides, ize 450mm long and making connection to out let and inlet of electronic water heater of 25 Ltr capacity complete all as specified and directed by Engr-in-charge

M/S GURU DEV BUILDERS

KUMAR CONSTRUCTION CO

HANS RAJ SHARMA

M/S BHARAT LIGHT ELECRIC.CO