External Electrification with Solar Street Light work at Industrial Area Village Patanakakri,Tehsil Rehli District- Sagar

Amount

Providing and erection of hot dipped galvanized octagonal poles in single section made from 3mm thick sheet having lockable weather proof flush door junction box, suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected in an approved manner on provided foundation. 42.98.5 7 meter 7 meter height, 130 X 70mm A/F, 220x220x12mm base plate, 4 nos. X 20 x 700mm bolt.

40 W Solar Light :- Supply semi integrated LED solar street light 40 W consists of solar photovoltaic module, battery, battery management system, control electronics, LED, microwave sensor, inter-connecting cable, and pole mounting piece integrated into the luminaries as a single unit. Solar street light with IP65 ingress protection having a system wattage of with 50 Wp high efficiency poly crystalline solar panel, highly efficient MPPT based charge controller and 12.8V24AH = WH lithium Ferro phosphate (LifeP04) Lithium- ion inbuilt 156 wh battery Li+ with smart battery capacity based dimming battery rechargeable - BIS certified cells-makeunicad/ Coslight/ Epitome or Equivalent BIS approved (working tempreture-10 C to 50 C) with proper battery management system. LED lumen efficacy shall be atleast 150 m/ W and driver should have >90% efficiency LED used high brightness high power LEDs make. Osram/ cree/ Nichia/ Bridgelux-LM80, L70 Compliance CCT 5700 K_+500 CCT ANSI CRI>70 for LED charges controller inbuilt MPPT charge controller with Automatic dusk to down ON/OFF. It should have microwave sensor based movement detection and dim level adjustment to effectively extend the working time Dimming level PIR motion sensor based dimmimg - 100% once motion detected for 10 sec. and after that resume to 30% load. The fixture should be onsite configurable via a handhelp remote. The fixture should be wireless cabling, Zero electricity cost and selfautonomy 2 days with standard dimmimg profile, i/c five year warranty period. Local service centre should be available in Madhya Prades.The Luminaries should be housed in IK 08 impact resistance certified aluminium with polycarbonate lens cover. Protection over charge, deep discharge, reverse polarity, over load, tempreture compensation, No Load, short circuit the luminaries shall have a specially designed adjustable pole mounting piece for optimal light distribution. (MAKE:- INTELIZON/ WIPPRO/ BAJAJ/ HELONIX/WAREE/CROMPTON) Note:- The Bidder Shall quote his own rates for item rates 1 to 2

Bidder Name

Amount

PRASHANT ELECTRICALS(GSTN-23AABFP1106H1ZX)

NEERAJ SINGH PARIHAR(GSTN-23BOZPP2113K2ZM)

NEERAJ SINGH PARIHAR

PRASHANT ELECTRICALS