Renovation of IEI and EEI at Type V Qtr. No. RG 20 at RGT Road, Sri Vijaya Puram

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, suitable size plastic switch board and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required

Group A

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

1 x 1.5 sq. mm

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 6 sq. mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

18 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

2 way 5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing the following way plastic switch board (ISI marked) on surface:

1 way ( Make: Press Fit, Code : 563041 or equivalent)

2 way ( Make: Press Fit, Code : 563051 or equivalent)

4 way ( Make: Press Fit, Code : 563101 or equivalent)

2 way, 16A ( Make: Press Fit, Code : 563121 or equivalent)

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

100 W, Deluxe Fan Regulator Rotary Step (Make: Anchor, Code : 38660 or equivalent)

Supplying of following recessed downlight of required shape with Die Cast Aluminium housing, WH/WW/NW with minimum burning hours of 50k hours ( Make: Philips, Model: Dura Slim or equivalent).

Supplying of decorative wall light with antique finish suitable for 1x E27 LED lamp ( Make: Luker, Model : MIKA WS6, Code: LWL 9803-1 or equivalent )..

Supplying of following LED Batten (integrated), CDL/WW/NW ( Make: Philips, Model: Astra Line or equivalent).

Supplying of 10 W LED Bulk Head of minimum efficacy 100 lm/w having PDC housing and Poly Cabonate cover with minimum burning hours of 50000 hours, IP65/ IP66 Protection, CW/NW (Make : Philips, Model : Endura or equivalent).

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing following LED lamps (CDL/WW) on the existing lamp holder:

4W, B22 ( Make : Philips or equivalent )

9W, B22/E27 ( Make : Philips or equivalent )

Installation ,Testing, Commissioning of all LED wall bracket /ceiling fittings of all sizes and shapes , complete with all accessories including connections etc. as required.

Supplying of energy saving 1200mm A.C. Ceiling fan, 5 Star with maximum power consumption of 36 W suitable for operation on 230 volts, single phase, 50 Hz, AC supply ((Make: Crompton, Model: HS DURO (energion induction) or equivalent)).

Supplying of 900mm decorative A.C. Ceiling fan, 1 Star suitable for operation on 230 volts, single phase, 50 Hz, AC supply (Make: Crompton, Model: AURA Prime Anti Dust or equivalent)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing of Wall Fan of 400mm sweep (Make: Crompton, Model: HIFLO NEO or equivalent).

Supplying of exhaust fan of 300 mm. sweep (Metallic ) (Make : Crompton, Model: Drift Air Plus Metal or equivalent).

Supplying of exhaust fan of 200 mm. sweep (Non Metallic ) (Make:Crompton, Model: Brisk Air Neo or equivalent).

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying & fixing of Modular AC Box with 20 A SP MCB in plastic enclosure & Unbreakable Heavy Duty with ISI Plug Top including connections etc. as required (Make : Anchor, Code : 98488 or equivalent).

Supplying, installation, testing and commissioning of 3 litres/3KW Instant Water Heater, ISI marked (Make: Crompton, Model: Rapidjet, Product Code: AIWH-3LRPIDJT3KW5Y or equivalent complete with heavy duty water connection pipe etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying, installation, testing and commissioning of 1.0 HP/0.75 KW Single Phase self Priming Pump with Suc. x Del. : 25 mm x 25 mm having a minimum discharge range of 2880 to 500 l/h at head range of 6 to 32 m (Make: Kirloskar, Model : Chhotu Star Ultra 1.02 HP 1P or equivalent) including connection etc. as required.

Providing and fixing 100 A capacity , 415 Vac, 50 Hz,Off Load Changeover Switch, FP with enclosure (Make: Indo Asian, Cat. No.: OFFP0100 or equivalent) including drilling holes , making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying of following size XLPE insulated armoured LT power cable of 1.1kV grade with aluminium conductor, conforming to IS 7098 (Part 1) 2011 (Make: Gloster or equivalent).

6 sq.mm. x 3 core

Supplying and laying of following size of DWC pipe along with suitable coupler conforming to IS 16205 (Part 24), 2018 complete with fitting and cutting, jointing etc. direct in ground (minimum 40 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required..

40 mm dia (OD-40 mm & ID-32 mm nominal)

Supplying and laying of following size of DWC pipe along with suitable coupler conforming to IS 16205 (Part 24), 2018 complete with fitting and cutting, jointing etc. direct in ground (minimum 40 cm below ground level in hard surface) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.

40 mm dia (OD-40 mm & ID-32 mm nominal)

Supplying and laying of following size of DWC pipe along with suitable coupler IS 16205 (Part 24), 2018 (old IS 14930, Part 2,2001 complete with fitting and cutting, jointing etc. directly on surface including clamping etc. as required.

40 mm dia (OD-40 mm & ID-32 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing DWC pipe as required. a) Upto 35 sq. mm

Upto 35 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on surface as required.

Upto 35 sq.mm

Removing existing Post Top/Bollard light from the foundation by breaking the concrete and disconnecting the cables as required.

Supplying and fixing of Cable Junction Box of minimum inside dimension 140mm x 140mm x 95 mm (Make : Sintex, Code : GSJB-1414 or equivalent ) with a two pole connector and 6 A MCB, SP, on the existing Post including connection etc. as required.

Supplying and fixing of Cable Junction Box of approx. inside dimension 450 mm x 375 mm x 200 mm (Make : Sintex, Code : GSJB-4537 or equivalent ) on the existing surface for fixing Kit-Kat Fuses, Neutral Link etc. as required for 3-phase power supply.

Providing and fixing 100 A Porcelain Rewirable Fuse Unit (Kit-Kat) (Make: Anchor, Code: 9333 or equivalent) including drilling holes , making connections, etc. as required.

Providing and fixing Porcelain Neutral Link including drilling holes , making connections, etc. as required.

Supplying of Pedestal Light Fixture ( Bollard Light) suitable for 1xE27 LED lamp (Make: Philips, Model : Glide, Model No.: 58176 or equivalent).

Installation, testing and commisioning of Pedestal Lantern ( Bollard Light)/Post Top Light on a platform with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) with a minimum size of 0.25m x 0.25m x 0.7 m including above and below ground level with suitable screws/ nuts & bolts and connections , earthing etc. as required.

Supplying, installation, testing and commissioning of 40W LED Gate Light (Make: Crompton, Model : MAPLE, Product Code : LPTO-40-CDL / LPTO-40-CDL or equivalent) on the existing Gate Post including connections, earthing etc. as required.

Earthing with ASHLOK make SEE brand Safe Earthing Electrode, Type- 19, 48 mm dia., length 2.00 mtrs. or equivalent by filling inner space with 50 Kg(2 bags) Electrodite (Back Fill Compound ) required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc.as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.