SPECIAL REPAIRS TO ROAD FURNITURE AND CERTAIN REVENUE AND MINOR WORK AT ZAKHAMA MILITARY STATION

Amount

Excavation in post holes (or similar holes) each in hard dense soil , complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

M& L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate ) in foundations, filling and mass concrete complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Removing excavated material exc 250 m but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M & L for Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n.exc 10cm thick, watered and rammed to a true surface with broken stone or boulders complete all as specified and directed.

M& L for 100 mm thick Cement concrete (1;4:8) type D2(using 40 mm graded stone aggregate) as in subbase complete all as specified and directed.

M& L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and pigments complete all as specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of the surface over 10cm width or girth and applying two coats of synthetic enamel paint to steel surface over a coat of red oxide primer complete all as specified and directed.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified and directed.

M & L for RCC 1:2:4 , type B-I (nominal mix) using 20 mm graded broken stone aggregate in cover slab (Note : Reinforement shall be measured and paid separately here in after) supported on wall n.exc 20 cm thick as in cover slab complete all as specified and directed.

Use & waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M& L for Mild steel TMT bar 10 mm dia or above cut to length bent to shape required including cranking, bending spirally, hooking ends etc and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M& L for 15 mm thick rendering on fair faces of brick work in CM 1:4 finished even and fair (without using extra cement) with WPC complete all as specified and directed.

Supply only Water proffing compound (ISI Marked),complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation new plastered surfaces of walls and applying three coats of white washing complete all as specified and directed.

M&L for preparation new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant complete all as specified and directed.

M & L for 75mm thick cement concrete type C2 (1:3:6) (using 40 mm graded stone aggregate) and finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

S&F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening as per specification & drawing and as directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg and complete all as specified and directed.

S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F 100 mm size Butt Hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-22 complete all as specified and directed.

S & F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F vitreous China white Squatting pan ,'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lean concrete for bedding, connection to drain pipe and to flushing pipe , anti syphonage pipe etc complete all as specified and directed.

S & F 10 Ltrs capacity low level flushing cistern (dual-flush), ISI marked embossed moulded from virgin poly propylene including flush pipe and handle including bracket complete all as specified and directed.

S & F vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but but incl providing brackets, waste pipe & CP waste coupling complete all as specified and directed.

S & F 15mm bore pillar taps, fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S &F 15 mm size PVC connections with brass check nuts with washers of length 450 mm complete all as specified and directed.

S & F 15mm bore stop valves of PTMT any colour high pressure, screwed for iron pipe and fixed 15 mm bore complete all as specified and directed.

S & F 15mm bore Bib taps of standard PTMT any colour high pressure, screwed for iron pipe and fixed complete all as specified and directed.

M & L for hardcore of gauge n.exc 0.63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface of a broken stone or boulders complete all as specified and directed.

M & L for 75 mm thick cement concrete type C2 (1:3:6) (using 40 mm graded stone aggregate) and finishing cement concrete surface even and fair without using extra cement complete all as specified and directed.

M & L for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15 mm thick screed bed in Cement Mortar (1:6) complete all as specified and directed.

M & L for glazed ceramic coloured of size 300 x 200 mm x 7 mm thick as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 10mm thick plastering in backing layer in cement mortar (1:4) complete all as specified and as directed.

M&L for providing precast cement concrete louvres and jallies 25 mm thick (measured solid) PCC of type B0 (1:2:4) set in CM (1:4) complete all as specified and directed.

S & F 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified and directed.

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M & L for Concrete bed to drain pipe in cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate), for 110mm dia pipe including packing under and haunching against the side of pipe after they are laid and tested in complete all as specified and directed.

M & L for Concrete bed to drain pipe in cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate), for 75 mm dia pipe including packing under and haunching against the side of pipe after they are laid and tested in complete all as specified and directed.

S & F 110mm dia PVC (SWR) Bends complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single (Single T) with access door complete all as specified and directed.

S & F 75mm dia PVC (SWR) bends with access door complete all as specified and directed.

S & F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required 100 mm bore pipe complete all as specified and directed.

Supplying , laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

Supplying , laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade' ,galvanised , with all fittings ; fixed to walls and ceilings or laid in floors complete all as specified.

S & F 500 litres capacity rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) ,hoisted and fixed ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 455 gms complete , screwed for 15 mm bore dia in position including complete all as specified and directed.

M & L 15mm bore dia stop valves , cast copper alloy ,screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

S&F Convex Mirror (1000 mm x 47 mm) made of PVC material provided with suitable MS pipe post, duly coated as per site requirement and embeded in PCC (1:4:8) including earth work complete all as specified and directed.

S &F unit/ directional/ road sign board, single sided of hardened ACP sheet 3 mm thick fixed on both sides, PoP riveted to stainless steel square pipe 20 mm x 20 mm and overall size of frame 1200 x 900 mm frame supported with another frame made of 40 x 40 mm SS square pipe and 3 m long double legged stainless steel pipe 50 mm dia, 16 gauge (SS - 304 Grade) and fixed with each other with SS clamps. The board is fully reflectorised with high intensity grade retro reflective tape of any colour grade IV as per ASTM - D 4956-07 and lettering (any Nos) loc map white colour duly computerised cut including arrow, signs, logos etc fixed on ground 450 mm deep with necessary cement concrete complete all as specified and directed.

M & L for painting lines, dashes, arrows, letters etc on roads, pavements and the line exc 10 cm wide with roads marking paint, white or golden yellow complete all as specified and directed.

M & L for Reinforced cement concrete (nominal mix) using Type B1 1:2:4 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for Reinforced cement concrete (nominal mix) using Type B1 (1:2:4) (using 20 mm graded stone aggregate) as in columns, Pillars, Piers, Posts & Struts etc complete all as specified and directed.

S & F of Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with revited bolted or welded attachment complete all as specified and directed.

S & F of 25 mm dia neck Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged, and jagged or lewised, exc 30cm long complete all as specified and directed.

S & F 40mm Vertical Rope Light Brown, Natural 100% Jute complete with common whipping and albright Knot to the pole, complete all as specified and directed.

S &F 0.63mm Galvanised corrugated mild steel sheeting with two corrugation, side lap fixed with L type or J type crancked hook bolts. complete all as specified and directed.

S & F 0.63mm thick plain galvanised, mild steel sheeting, in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) etc and fixed with nail complete all as specified and directed.

M & L for Preparation Surface of steel surfaces and applying two coats of synthetic enamel paint over one coat of red oxide primer over one coat of mordant solution including ,washing & cleaning to new zinc or galvanised surface complete all as specified and directed.

M & L for Preparation Surface of any description, n exc 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for point wiring with single core PVC insulated unsheathed multistranded copper conductor FRLS cable of size 1.5 Sqmm nominal area 1100 volt grade drawn through and including PVC casing-capping/conduit of suitable size with all fittings and accessories including PVC board with cover of suitable size for housing/mounting the switches/socket etc including 1.5 Sqmm PVC insulated unsheathed single core copper conductor as earth continuty wire connected to common earth dolly for one light/exhaust fan point control by one switch.one way complete all as specified and directed. Note: colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green

All as per item No 70 above but for 15 amp socket by using 2.5 sqmm copper cable with 2.5sqmm copper conductor as earth continuity.

All as per item No 70 above but for 3 pin, 5 Amp Socket on the same board.

S & F switch socket combination 5 Pin, 16 Amp flush type complete all as specified and directed.

S & F switch socket combination 2 in 1, 3 pin 05 Amp flush type universal, complete all as specified and directed.

S&F of switch piano flush button single pole one way 5 Amp. complete all as specified and directed.

S & F LED bulk head luminaires 10 W 6000k Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. complete all as specified and directed. Make-Havells Cat No.HEXAFT10WLED857SSYMBOPC or eqvt make.

S & F ceiling rose surface back light 65 x 25mm, two to three terminal. complete all as specified and directed.

S&F Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F LED lamps 10W, LM 80 tested LED technology,Wide voltage range 150-300VAC complete all as specified and directed. Make -Wipro or equivalent make of Philips, Bajaj, Havells

S & F LED T/L 20 W, Fixture size (1150x25x40) mm (for 20 W), complete with batten and luminaries Make - Havells , Model No. LUMILINEPLUSBS20WLED865SPCSS or equivalent . Note:LED used shall conform to IS- 16103: 2012 &IS-16101:2012 should be of SMD type only. ii) LED efficiency shall be greater than 100 lumens per Watt/ max latest efficacy available. iii) Colour rendering index (CRI: Greater than or equal to 70). iv) Min efficiency of driver: 85%. v) Power factor of complete fitting: Greater than 0.95. vi) Input Operating Voltage: 140 V to 277V AC. vii) In-built high and low voltage cut-offs: 140 V Low and 277 (high). viii) Short circuit, Over load protection. ix) Housing of luminaries: Pressure die-cast aluminum LM6/ADC 12/LM 24housing

S & F heavy duty exhaust fan, oscillating 300 mm sweep, 1400 RPM,operates in 220V, single phase, 50 Hz with loures and all accesories fixed to wall/ wooden surfaces and making good disturbed surface as existing matching to wall / wooden surfaces including testing etc and complete all as specified and directed Make-orient or equiv.

S & F of PVC rectangular block of size 250x200x50mm depth complete all as specified and directed.

S & F Factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, SPN, 4 way, 240 Volts suitable for housing MCBs including complete all as specified and directed.

S & F of MCB Single pole and neutral 240 Volts, 6-32. Amps, 10 A,C-series,complete all as specified and directed. Make -havells, cat No.DHMGCSNF006-032 or same as equivalent.

S & F MCB Single pole 240 Volts, 6-32. Amps, 10 A,C-series,complete all as specified and directed. Make -havells, cat DHMGCSPF006-032 or same as equivalent.

S & F 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor surved with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or rouind or 4.0 sq mm cable.

S & F House service bracket (Hook type) compleate with 3.0 meter long GI pipe 40 mm dia Med grade, two Nos 90 degree bends, MS hooks and stay or guy. complete all as specified and directed.

M & L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge earth plate at a depth not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00mm dia by means of nuts, bolts, check nuts & washers made of galvanized iron or steel and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1 pre-cast RCC cover slab 30cmx30cmx10cm with one handle for lifting made out of 8mm dia MS bar, watering pipe 20mm bore galvanized iron pipe (medium grade) with MS funnel for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in hard/dense soil complete all other accessories as shown on electrical plate No 3 of MES Sch Pt-I including taking down the existing,complete all as specified and directed.

Shri H Kivigho Zhimo

Shri Atoshe Tuccu

commercial enterprises