REPAIR TO PCC APPROACH PATH, CHEQUERED TILE, INTERLOCKING TILE, FOOTPATH/ PARKING TILE AND ALLIED B/R WORKS AT AIR FORCE STATION UTARLAI.

Demolition of cement concrete of any description and in any position not otherwise specifically provided as in floor/paving and removing the same upto 1.00Km or outside the MD land complete all as specified and directed

M&L for 75mm thick PCC 1:4:8 type D-2(using 40mm graded aggr) as in sub base.complete all as specified and directed.

S&F for vitrified tiles 10 mm thick ( square/rectangular) in any shade are of each tile area not exceeding 0.36 sqm. In floors, parking, hard standing and similar work etc over screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match incl dismantling old tiles Complete all as specified and directed.

Provding and laying at or near ground lavel foctory made kerb stone of M-25 grade cement concrete in position to the requied line, line, level and corvture jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shapp not to more than 5mm) incl making drainage openign wherver required complete..Complete all as specified and directed. .

M&L for preparation of new or untreated concrete surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of primer , complete all as specified and directed.

Demolition of block masonry masonry/PCC block masonry/stone masonry built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete.

M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in coping surface finished even and smooth without using extra cement all as specified and as directed

M/L rendering 15mm thick on concrete surface or brick work in CM 1:6 finished even and smooth with out using extra cement similar work . all as specified and directed.

M&L for 75 mm thick PCC type CI 1:3:6 using 20mm graded crushed stone aggregate as in plinth protection laid in alternate pannels finished even and smooth without using extra cement.