Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹125.5 CrAccepted-AOC | ₹125.5 Cr Quoted ₹129.2 Cr | 1 | Accepted-AOC L1 |
| 2 | 2₹139.2 CrRejected-AOC | ₹139.2 Cr | 2 | Rejected-AOC L2 |
Tender Value
Refer Docs
EMD Value
₹31.4 L
Closing Date
15 Oct 2024, 3:00 pmClosed
Superintending Engineer, Contracts and Monitoring
Contracts and Monitoring, 4th Floor, CMWSS Board
Package IV, Strengthening and Improvement works of Electrical / Mechanical / Instrumentation / Civil structure and its allied works of various sewage pumping stations in Area IV, V and VI under Vada Chennai Valarchi Thittam
2024_CMWSS_481372_1
CNT/SEW/NCB/VCVT/3634/2024-25
Open Tender
Civil Works - Water Works
365 days
Chennai
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹31.4 L
29 Jan 2025
7 Sept 2024
16 Oct 2024
7 Sept 2024
15 Oct 2024
8 Oct 2024
Amount
Bill No.1-Improvement works to be carried out in Civil/Electrical works in various sewage pumping station in Area IV
Supply delivery and erection of 1 No of 30 HP submersible pumpset and allied works at Vyasarpadi SPS
30HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 357 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 7500 lpm against a total head of 10 m (30 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 20 HP submersible pumpset and allied works at Nehru Nagar SPS
20HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 154 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 2400 lpm against a total head of 15 m (20 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 30 HP submersible pumpset and allied works at Nehru Nagar SPS
30HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 357 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 7500 lpm against a total head of 10 m (30 HP)
Extra Cable
Pdestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 20 HP submersible pumpset and allied works at Muthamil Nagar SPS
20HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 154 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 2400 lpm against a total head of 15 m (20 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply, delivery and erection of 3 Nos 150HP Centrifugal Pump Only Set and allied works at Erukkencherry SPS
Supply and delivery of Horizontal split casing centrifugal pump conforming to IS 1520 and as amended there after with CI casing and split glands, stainless steel shaft, hydraulically and dynamically balanced bronze impellers capable of discharging required quantity of water against a total head noted below due to all causes and with the accessories such as G.M air release cock, Grease cup, G.I priming funnel, M.S lifting hook, drip water G.I pipe connections, leading to the outside of pump house rubber water deflector, double flap foot valve, G.M strainer including unique tyre type coupling, common M.S fabricated base to mount pump and motor and other standard fittings etc complete. Pump shall be capable of discharging the specified quantity at the head noted at the minimum NPSH at site conditions. The shut off head shall be atleast 25% over and above the head at duty point. The pump shall be suitable for operation in AC three phase, 415 V, 50 Hz, 1500 RPM
Centrifugal Pump - (150 HP)
Erection of electrically driven clear water non-clog centrifugal pumpsets having discharge and head varying from 9000 to 24000 Lpm; 23 to 40m respectively inclusive of foundation, foundation boltsand nuts and required allied materials and works inclusive of suction and delivery connections
Supply delivery and erection of 1 No of 60 HP submersible pumpset and allied works at Kannadasan Nagar SPS
60HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 642 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 10800 lpm against a total head of 16 m (60 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 50 HP submersible pumpset and allied works at Vyasarpadi Lake area SPS
50HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 619 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 10500 lpm against a total head of 14 m (50 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 30 HP submersible pumpset and allied works at Vyasarpadi Lake area SPS
30HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 357 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 7500 lpm against a total head of 10 m (30 HP)
Extra Cable
Pdestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 30 HP submersible pumpset and allied works at Melpattadai SPS
30HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 357 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 7500 lpm against a total head of 10 m (30 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 2 No of 50 HP submersible pumpset and allied works at Thendral Nagar SPS
50HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 619 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 10800 lpm against a total head of 13 m (50 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 60 HP submersible pumpset and allied works at CB Road SPS
60HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 642 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 10800 lpm against a total head of 16 m (60 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 2 No of 50 HP submersible pumpset and allied works at Tondiarpet A PS
50HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 619 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 10500 lpm against a total head of 14 m (50 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 30 HP submersible pumpset and allied works at Tondiarpet D SPS
30HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 357 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 7500 lpm against a total head of 10 m (30 HP)
Extra Cable
Pdestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 20 HP submersible pumpset and allied works at DBK chetti street SPS
20HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 154 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 2400 lpm against a total head of 15 m (20 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 20 HP submersible pumpset and allied works at CB Road SPS
20HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 154 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 2400 lpm against a total head of 15 m (20 HP)
Extra Cable
Pedestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply delivery and erection of 1 No of 30 HP submersible pumpset and allied works at Tondiarpet F Old SPS
30HP Submersible Pumpset
Supply, delivery, erection, testing and commissioning of submersible sewage pumpset with following duty point, including required capacity 3 Ph, 415 V, AC, 50 Hz, Electrical Motor with PVC insulated double sheathed copper conducted cable of total length of 10 m, Flow 357 m3 / hr, control panel, Pedestal Coupling, guide wire / guide pipe (GI-50 mm dia) of length 10m, M.S.(GLVD) lifting chain of length 10m, necessary level controlling probes with sufficient length of armoured copper LTUG cable to connect the probe from the junction box to the control panel, fasteners including laying of pump cable under ground with suitable conduit and clamping on walls / trays and incidental civil works etc. complete.
Pump - 7500 lpm against a total head of 10 m (30 HP)
Extra Cable
Pdestal Coupling
Guide pipe
Lifting chain(M.S./GLVD)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.
Supplying and fixing of 63 Amps Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete.
Supplying and fixing of 63 Amps Triple Pole SFU with HRC fuses on suitable angle iron frame with earth connection only.
Supply ,delivery, installation and commisioning of odor control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for instalation,commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessoiries,media fillinf port, Pre filter, Regeration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly Ethylene or MS with epoxy lining. Power supply three pahse. Noise level should be as per IS.Equipment should be capable to remove odor from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.Odor control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge in various SPS in Area IV .
Erukkencherry SPS
Kannadasan Nagar SPS
Poongavanam Nagar SPS
Tondiarpet A SPS
Tondiarpet D SPS
Tondiarpet E SPS
Kasimedu SPS
Thiruvalluvar Nagar SPS
RK Nagar South SPS
Vyasarpadi Lake Area SPS
Melpattadai SPS
MKB Nagar SPS
Muthamil Nagar SPS
Kamarajar Salai SPS
KB4 SPS
Kadumbai Amman SPS
Thendral Nagar SPS
CB Road SPS SPS
DBK SPS
Vyasarpadi SPS
RK Nagar North SPS
Supply,delivery and erection of 40KVA DG Set with control panel and allied works at Ranganathapuram SPS.
DG Foundation
Cleaning and Chipping the entire surface Cost including material, labour, tools and tackles etc., complete
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 40KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 40 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 2A5D1A34.5CW
Current (Amps) - 55.6
Engine Rated Power in kW / hp - 34.5/46.2
Engine Speed - RPM - 3000
Fuel Tank Capacity in Litters - 75
Lube Oil Capacity in Litters - 4.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 800
Genset Size without Silencer in mm [L x W x H] - 1950 x 950 x 1379
Genset Size with Silencer in mm [L x W x H] - 1950 x 950 x 1681
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 3000 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 70Sq.mm UG Aluminium Cable. (40 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exhauster (4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator
Supply,delivery and erection of 100KVA DG Set with control panel and allied works at Tondiarpet A SPS.
Area Clearing Works
Mazdoor Category -I
DG Foundation
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 100KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 100 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 4B5D1C100RW
Current (Amps) - 139.1
Engine Rated Power in kW / hp - 100/135.9
Engine Speed - RPM - 1500
Fuel Tank Capacity in Litters - 300
Lube Oil Capacity in Litters - 8.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 2150
Genset Size without Silencer in mm [L x W x H] - 3225 x 1100 x 2035
Genset Size with Silencer in mm [L x W x H] - 3225 x 1100 x 1568
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 1500 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 185Sq.mm UG Aluminium Cable. (100 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exauster ( 4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator.
Supply,delivery and erection of 100KVA DG Set with control panel and allied works at CB Road SPS.
Area Clearing Works
Mazdoor Category -I
DG Foundation
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 100KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 100 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 4B5D1C100RW
Current (Amps) - 139.1
Engine Rated Power in kW / hp - 100/135.9
Engine Speed - RPM - 1500
Fuel Tank Capacity in Litters - 300
Lube Oil Capacity in Litters - 8.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 2150
Genset Size without Silencer in mm [L x W x H] - 3225 x 1100 x 2035
Genset Size with Silencer in mm [L x W x H] - 3225 x 1100 x 1568
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 1500 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 185Sq.mm UG Aluminium Cable. (100 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exauster ( 4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator.
Supply,delivery and erection of 100KVA DG Set with control panel and allied works at Patel Nagar Filling Point.
Area Clearing Works
Mazdoor Category -I
DG Foundation
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 100KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 100 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 4B5D1C100RW
Current (Amps) - 139.1
Engine Rated Power in kW / hp - 100/135.9
Engine Speed - RPM - 1500
Fuel Tank Capacity in Litters - 300
Lube Oil Capacity in Litters - 8.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 2150
Genset Size without Silencer in mm [L x W x H] - 3225 x 1100 x 2035
Genset Size with Silencer in mm [L x W x H] - 3225 x 1100 x 1568
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 1500 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 185Sq.mm UG Aluminium Cable. (100 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exauster ( 4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator.
Supply,delivery and erection of 100KVA DG Set with control panel and allied works at RK Nagar South SPS.
Area Clearing Works
Mazdoor Category -I
DG Foundation
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 100KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 100 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 4B5D1C100RW
Current (Amps) - 139.1
Engine Rated Power in kW / hp - 100/135.9
Engine Speed - RPM - 1500
Fuel Tank Capacity in Litters - 300
Lube Oil Capacity in Litters - 8.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 2150
Genset Size without Silencer in mm [L x W x H] - 3225 x 1100 x 2035
Genset Size with Silencer in mm [L x W x H] - 3225 x 1100 x 1568
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 1500 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 185Sq.mm UG Aluminium Cable. (100 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exauster ( 4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator.
Supply, delivery and erection of 225 KVA DG set with control panel and allied works at RK Nagar North SPS
Capacity of D.G. Set - 225 kVA
Supply,delivery and erection of 100KVA DG Set with control panel and allied works at Vyasarpadi SPS.
Area Clearing Works
Mazdoor Category -I
DG Foundation
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 100KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 100 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 4B5D1C100RW
Current (Amps) - 139.1
Engine Rated Power in kW / hp - 100/135.9
Engine Speed - RPM - 1500
Fuel Tank Capacity in Litters - 300
Lube Oil Capacity in Litters - 8.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 2150
Genset Size without Silencer in mm [L x W x H] - 3225 x 1100 x 2035
Genset Size with Silencer in mm [L x W x H] - 3225 x 1100 x 1568
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 1500 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 185Sq.mm UG Aluminium Cable. (100 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exauster ( 4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator.
Supply, delivery and erection of 63KVA DG Set with control panel and allied works at Kamarajar Salai SPS.
Area Clearing Works
Mazdoor Category -I
DG Foundation
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 62.5KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 62.5 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 3B5D1C621W
Current (Amps) - 87
Engine Rated Power in kW / hp - 62/84.23
Engine Speed - RPM - 1500
Fuel Tank Capacity in Litters - 200
Lube Oil Capacity in Litters - 6.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 1750
Genset Size without Silencer in mm [L x W x H] - 2750 x 1080 x 1503
Genset Size with Silencer in mm [L x W x H] - 2750 x 1080 x 1967
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 1500 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 90Sq.mm UG Aluminium Cable. (62.5 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exauster ( 4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator.
Supply,delivery and erection of 40KVA DG Set with control panel and allied works at Damodharan Nagar SPS.
DG Foundation
Cleaning and Chipping the entire surface Cost including material, labour, tools and tackles etc., complete
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 40KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 40 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 2A5D1A34.5CW
Current (Amps) - 55.6
Engine Rated Power in kW / hp - 34.5/46.2
Engine Speed - RPM - 3000
Fuel Tank Capacity in Litters - 75
Lube Oil Capacity in Litters - 4.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 800
Genset Size without Silencer in mm [L x W x H] - 1950 x 950 x 1379
Genset Size with Silencer in mm [L x W x H] - 1950 x 950 x 1681
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 3000 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 70Sq.mm UG Aluminium Cable. (40 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exhauster (4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator
Supply,delivery and erection of 100KVA DG Set with control panel and allied works at Vyasarpadi Filling Point
Area Clearing Works
Mazdoor Category -I
DG Foundation
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
COOPER 100KVA Diesel Genset
World class “COOPER” Liquid Cooled Diesel Generator With Auto Start / Stop Inbuilt Panel
Engine Specification
Genset Rating - 100 kVA
Panel Board - A.S.A.S. Panel
Phase - 3
Engine Model Number - 4B5D1C100RW
Current (Amps) - 139.1
Engine Rated Power in kW / hp - 100/135.9
Engine Speed - RPM - 1500
Fuel Tank Capacity in Litters - 300
Lube Oil Capacity in Litters - 8.5
Cooling Systems - Liquid Cooled
Genset Dry Weight in Kgs - 2150
Genset Size without Silencer in mm [L x W x H] - 3225 x 1100 x 2035
Genset Size with Silencer in mm [L x W x H] - 3225 x 1100 x 1568
Alternator Specifications
Alternator Type - Brushless
Voltage - 415
Speed - 1500 RPM
Frequency - 50 HZ.
Cable End Termination
G.I.Pipe Earthing with necessary Civil Work.
Supply and laying of 3½ Core x 185Sq.mm UG Aluminium Cable. (100 kva)
Supply and laying of Copper Wire earthing for the Engine and Alternator.
Control Cable 2.5 sqmm
Silencer pipe working and glading working exauster ( 4,6,8 inches pipes) different kvas
Interconnection between MES and the Generator.
Reconstruction of Valve chamber and its allied works at Vyasarpadi SPS
1.8 m x 3.5 m x 1.6 m
Earth work excavation in all kinds of soils except hard rock requiring blasting inclusing of shoring strutting and bailing out water whereever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing surplus earth within in compound in places as shown by the departmental officers clearing and levelling the site with initial lead of 10mts. and lift of 2m etc. complete.
Supplying and filling with sand for foundation and basement as per standard specification
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly & SRC for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Providing and laying in position machine batched, machine mixed and machine vibrated design mix. Sulphate resistance cement concrete of M30 grade (using SRC) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, etc. as per standard specification and as directed at site
Supplying and fabricating CRS bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works
Precast slab in Cement Concrete 1:2:4 using 12-20mm BG jelly for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing, etc., complete.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications.
Plastering with cement mortar 1:3 (SRC) for 20mm thick including curing, etc., complete.
Plastering with cement mortar 1:3 (SRC) for 12 mm thick including curing, etc., complete.
Refilling with excavated soil (other than sand) compling with standard specification for filling in foundation and basement etc. complete
Disposal of earth work
Supplying and fixing C.I.steps.
Reconstruction of Valve chamber and its allied works at RK Nagar South SPS
2.4 m x 3.9 m x 2.2 m
Earth work excavation in all kinds of soils except hard rock requiring blasting inclusing of shoring strutting and bailing out water whereever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing surplus earth within in compound in places as shown by the departmental officers clearing and levelling the site with initial lead of 10mts. and lift of 2m etc. complete.
Supplying and filling with sand for foundation and basement as per standard specification
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly & SRC for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Providing and laying in position machine batched, machine mixed and machine vibrated design mix. Sulphate resistance cement concrete of M30 grade (using SRC) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, etc. as per standard specification and as directed at site
Supplying and fabricating CRS bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works
Precast slab in Cement Concrete 1:2:4 using 12-20mm BG jelly for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing, etc., complete.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications.
Plastering with cement mortar 1:3 (SRC) for 20mm thick including curing, etc., complete.
Plastering with cement mortar 1:3 (SRC) for 12 mm thick including curing, etc., complete.
Refilling with excavated soil (other than sand) compling with standard specification for filling in foundation and basement etc. complete
Disposal of earth work
Supplying and fixing C.I.steps.
Renovation of suction well and its allied works at Vyasarpadi SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at Vyasarpadi Lake Area SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at Tondiarpet F old SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at Singaravelan Nagar SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at RK Nagar South SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at RK Nagar North SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at Poongavanam Nagar SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at MKB Nagar SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at Melpattadai SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Renovation of suction well and its allied works at CB Road SPS
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Colour washing two coats over one coat of white washing
Complete replacement of suction well and its allied works at Veerakutty SPS
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining.
From 1.0m above ground level to 3.0m below ground level (Curved Surface)
9 m to 10 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (River sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.0m above ground level to 1.5m below ground level
From 1.5m to 4.5m below ground level
From 9.0m to 13.5m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
9m to 13.5m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.2 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water.
3m dia well
First depth of 2m
Second depth of 2m
Third depth of 2m
Fourth depth of 2m
Fifth depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
9m to 13.5m depth
Supplying, fabricating CRS bars manufactured by Primary steel including cost of steel, binding wire, cutting, cranking and tying, in position with binding wire assembly etc complete.
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supplying and fixing C.I.steps.
Colour washing two coats over one coat of white washing
Supply and installation of SS open mesh flooring with 25x6mm thick flats for outer frame and 25x3mm SS and 12x3mm SS flats spaced at 30mm and 60mm respectively and 50x10mm SS flats for mesh support and 50x50x6mm SS angle for opening forming a mesh over the surface of the well etc,complete
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Dismentaling
Complete replacement of suction well and its allied works at Dhamodaran SPS
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining.
From 1.0m above ground level to 3.0m below ground level (Curved Surface)
7 m to 8 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (River sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.0m above ground level to 1.5m below ground level
From 1.5m to 4.5m below ground level
From 4.5m to 9.0m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
4.5m to 9m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.2 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water.
3 m dia well
First depth of 2m
Second depth of 2m
Third depth of 2m
Fourth depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
4.5m to 9m depth
Supplying, fabricating CRS bars manufactured by Primary steel including cost of steel, binding wire, cutting, cranking and tying, in position with binding wire assembly etc complete.
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supplying and fixing C.I.steps.
Colour washing two coats over one coat of white washing
Supply and installation of SS open mesh flooring with 25x6mm thick flats for outer frame and 25x3mm SS and 12x3mm SS flats spaced at 30mm and 60mm respectively and 50x10mm SS flats for mesh support and 50x50x6mm SS angle for opening forming a mesh over the surface of the well etc,complete
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Dismentaling
Complete replacement of suction well and its allied works at DBK chetty Street SPS
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining.
From 1.0m above ground level to 3.0m below ground level (Curved Surface)
7 m to 8 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (River sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.0m above ground level to 1.5m below ground level
From 1.5m to 4.5m below ground level
From 4.5m to 9.0m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
4.5m to 9m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.2 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water.
5m dia well
First depth of 2m
Second depth of 2m
Third depth of 2m
Fourth depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
4.5m to 9m depth
9m to 13.5m depth
Supplying, fabricating CRS bars manufactured by Primary steel including cost of steel, binding wire, cutting, cranking and tying, in position with binding wire assembly etc complete.
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supplying and fixing C.I.steps.
Colour washing two coats over one coat of white washing
Supply and installation of SS open mesh flooring with 25x6mm thick flats for outer frame and 25x3mm SS and 12x3mm SS flats spaced at 30mm and 60mm respectively and 50x10mm SS flats for mesh support and 50x50x6mm SS angle for opening forming a mesh over the surface of the well etc,complete
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Dismentaling
Complete replacement of suction well and its allied works at Bharathi Nagar SPS
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining.
From 1.0m above ground level to 3.0m below ground level (Curved Surface)
7 m to 8 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (River sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.0m above ground level to 1.5m below ground level
From 1.5m to 4.5m below ground level
From 4.5m to 9.0m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
4.5m to 9m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.2 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water.
3m dia well
First depth of 2m
Second depth of 2m
Third depth of 2m
Fourth depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
4.5m to 9m depth
Supplying, fabricating CRS bars manufactured by Primary steel including cost of steel, binding wire, cutting, cranking and tying, in position with binding wire assembly etc complete.
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supplying and fixing C.I.steps.
Colour washing two coats over one coat of white washing
Supply and installation of SS open mesh flooring with 25x6mm thick flats for outer frame and 25x3mm SS and 12x3mm SS flats spaced at 30mm and 60mm respectively and 50x10mm SS flats for mesh support and 50x50x6mm SS angle for opening forming a mesh over the surface of the well etc,complete
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Dismentaling
Renovation of building and panel room and its allied works at Vyasarpadi SPS
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m etc. complete.
Supplying and filling sand for foundation and basement including watering, consolidating, ramming etc. complete.
P.C.C 1:3:6 using 40mm gauge hard broken stone jelly including laying in layers of not more than 15cm thick including ramming curing etc complete
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the Board officers complete.
Up to 1.5 mt below GL
1.5 mt to 4.5 mt below GL
Upto plinth above GL
Up to 4.5 mt Above Plinth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high.
Above 3m high
Sun shade laying C.C. 1:2:4 for RCC sunshade work using 20mm hard broken stone jelly 80mm thick at wall end and 50mm thick at free end projecting 600mm from wall face moulded along with RC lintels and tailed into the full thickness of wall where there are no lintels excluding cost of reinforcement but including centering, shuttering, compacting, curing and finishing, etc., complete
Supplying, fabricating and laying in position MS or RTS rods for RCC works including cost of steel, binding wire, cutting, cranking and tying in position with binding wire assembly etc., complete
Stock brick work in cement mortor 1:4 using second class bricks including curring etc. complete for 23 cm thick wall
upto plinth
above plinth
11mm thick wall
Plastering with C.M 1:3 for 12mm thick including curing etc. complete
Supplying and fixing in position of best approved colour design and quality FRP sheets of 1.5mm thick with necessary 'U' or 'J' bolts, bitumen washers and cutting the FRP sheets to the required size.etc. complete.
Special celling plastering 10mm thick with C.M. 1:3 for RCC slabs and beams, columns, roof slabs and sun shade
Supplying and fixing of PVC Doors of shutter panels dimension 20mm x 200mm thick, shutter frame dimension 24mm x 57mm and outer frame dimension 40mm x 48mm and wall thickness of 1.5mm (+ 5%) make Jain profile with reinforcement of wood. Outer frame and doors are connected by standard fittings of 3" stainless steel hinges 3 nos with 4" plastic handle 2 nos and 8" aldrop 2 nos and with required screws etc complete.
Flooring 100mm thick base concrete in C.M. 1:4:10 using 40mm B.G. jelly including laying, ramming, curing etc. complete complete
Paving Hydraulic Pressed Cement Double Charged Vitrified Tiles of size 600 x 600 x 8mm finished thickness with small Verona or Indian Marble Chips (other than Salem Magnasite) with CM 1:3, 20mm thick and painted with same colour Cement including polishing with power polisher to a high degree of polish so as to be perfectly smooth and glossy with GREY colour
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick laid in CM 1;2, 10mm thick and pointing with white cement using 0.4 Kg/m2 including finishing the joint and pointing flush with tile surface, etc., complete.
Terrace flooring with two course of pressed tiles 15x15x12 cm using cement mortor 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortor
Weathering course concrete with broken brick jelly 20mm guage in pure slacked lime over RCC roof slab in proportion of 32:12 (no sand to be sued) well beaten with wooden beaters to be required depth of 80mm thick and giving rerquired slope and thickness to roof as required etc. complete.
Supplying and erecting rolling shutters 76mm, 18 guage of galvanized steel sheet with push and pull tupe or self coiling type operated by operated by pulling hook with top cover including lock arrangements and fixing in position inside or out side etc. complete and painting with priming coat of red oxide with out lock (Payment will be made only for actual opening of shutters)
Maufacturing supplying and fixing in position Anodised Alu. Natural colour mat finish with openable type window with extruded Alu. Sections with two panels of size (Frame - 38 x 33 x21 x 2.4mm @ 0.615 Kg/m, Shutter: Bottom, Top - 38.5 x 33 x 24.5 x 3 & 4mm @ 0.706 Kg/m, Interlocking vertical - 59 x 33 x 25 x 2.5mm @ 1.135 Kg/m) with necessary accessaries such as rubber beadings best quality of lock handle hinges,stays and fixing 4 mm thick plain / frosted/ pin headed glass including cost of all materials labour for electrical consumption required for drilling holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the Board officers.The Al.Surfaces is to be anodised with matt finish usder electrically condition in accordance with ISI1868/1962 specification for an average anodic film thick of not less than 15 microns. (All materials should be got approved by the Site Engineer before fixing in position)
Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of size (Frame : Section - 101.60 x 44.45 x 3.18 mm @ 2.399 Kg/m, Shutter : Top, Middle, Vertical style- 50 x 44.45 x 2.5mm @ 1.292 Kg/m, Bottom - 100 x 44.45 x2.5mm @ 1.974 Kg/m) with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials,Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.All the materials should be got approved by the Site Engineer before fixing as directed.
Supplying and fixing in position of aluminium anodised colour matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans for louvers 4mm thick Al. Clips, including all materials, labour & power consumption charges required for fabrication if necessary chipping dismantling making holes in RCC columns,beamsor masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc., complete. The Aluminium surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than15 microns (fifteen) for all sections. All the materials should be got approved by the Site Engineer before fixing in position as directed.
Supplying and fixing M.S. grills for window including one coat of primer with red lead etc. complete as directed.
Colour washing two coats over one coat of white washing
White washing three coats ( Ceiling)
Painting two coats with superior quality of ready mixed paints of chocholate colour, light green or grey colour or any other approved colour over painting with primary coat (red lead) on new iron work.
Precast slab in Cement Concrete 1:2:4 using 12-20mm BG jelly for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing, etc., complete
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations & basement
SANITARY ARRANGEMENTS
Providing and fixing colour glazed European water closet with rose wood seatings (Black) low level flushing tank with fittings, etc., complete.
Providing and fixing 100 mm dia CI soil pipe
Providing and fixing 50 mm dia CI soil pipe bend without door arrangement for bathroom
Providing and fixing 100mm dia CI soil pipe bend without door arrangements
Providing and fixing 50 mm dia CI soil pipe for bathroom
Providing and fixing 15 x 10 cm SW gully trap with CI gratings in BJ concrete in CM 1:4:10 with silt pit diaphragm arrangements etc., complete.
Supplying, laying , jointing and testing 100mm dia SW pipe including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil depositing the earth on banks with initial lead of 10m , lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23 cm thick watering, ramming to consolidation, depositing the surplus earth, etc. complete at an average depth of 2.0m.
Construction of inspection chambers of following sizes with earth work excavation for foundation, 23cm thick concrete bed using 40mm brick jelly concrete in C.M. 1:4:10 for foundation, brick work in C.M. 1:6 for chamber, plastering with C.M. 1:3,12mm thick, benching, channelling, supplying and fixing 45x45cm medium weight L.S. cover and frame, etc., complete for a. 60cm x 60cm x 75cm
WATER SUPPLY ARRANGEMENTS
Supplying and fixing 55cm x 40cm colour glazed wash basin with lead and brass connections, C.P. Pillar Tap and other fittings, etc., complete
Supplying and fixing best mirror of size 60cmx45cm of 6mm thick with plywood back including necessary fittings, etc., complete
Supplying and fixing C.P towel rails 45cmx 20mm
Supplying GI pipes and specials of size 25mm dia including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding etc., complete
Supplying and fixing 25 mm GM Gate Valve
Supplying and fixing 20mm C.P Screw down Tap
Supply and delivery of domestic pumpset (centrifugal monobloc pumpset of capacity 100lpm and 20m head with ISI mark as per IS 9079/1989-1HP) including necessary electrical works etc., complete.
Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed at site etc.,
Supplying and fixing C.P. Shower raiser 15mm
Attending Repair works in the existing Generator Room at Kasimedu SPS Area IV.
Repair works Inside Diesel Generator Room
Providing Concrete Pillar for supporting the Beam
Earth work excavation in all kinds of soils as per SS20B
Supplying and filling M sand for foundation
Supplying and laying CC 1:3:6 using 40mm BG jelly
CC 1:2:4 using 20mm BG jelly for matt foundation and basement
Providing form work for RCC works
Supplying fabricating and laying in position MS or RTS Rods for RCC works
Plastering in CM 1:3 for 15mm thick including curing etc.,
Replacing of Sunshade
Laying CC 1:2:4 for RCC sunshade work using 20mm hard broken stone jelly 80mm thick at wall end and 50mm thick at free end projecting 600mm from wall face etc.,
Replacing of windows
Supplying and fabricating and fixing in position of anodised natural colour matt finish sliding window in two track at Office Room and pump House
Replastering work at Ceiling portion
Engaging labours for chipping out the existing crack developed plastered surface
Mazdoor Category I
Special ceiling plastering for RCC slab/roof in CM 1:3 10mm thick
Flooring Work
Engaging labours for chopping at the existing floor plastered surface
Mazdoor Category I
Granolithic flooring 25mm thick with CC 1:2:4 using 3-10mm chips etc
Providing Main Gate
Earth work excavation in all kinds of soils as per SS20B
Supplying and filling M sand for foundation
Supplying and laying CC 1:3:6 using 40mm BG jelly
CC 1:2:4 using 20mm BG jelly for matt foundation and basement
Providing form work for RCC works
Supplying fabricating and laying in position MS or RTS Rods for RCC works
Plastering in CM 1:3 for 15mm thick including curing etc.,
Fabricating supplying and fixing in position of MS Doors with single leave, the door outer frame will be 40x40x6mm MS angle the shutter frame will be 65x65x6mm with intermediate stiffer 35x35x6 with cross stiffer 25x25x5mm etc.,
Providing RCC Passage
CC 1:2:4 using 20mm BG jelly for matt foundation and basement
White washing and colour washing
Painting one coat with approved cement paint over cement plastered surface at Generator Room
Painting two coats with approved cement paint over one coat of primer etc.,
Painting with two coats of ready mixed plastic emulsion paint first class quality etc.,
Miscellaneous Item
Labour charges for repairing the existing main entrance gate, providing MS sheet whereever necessary including cost of welding materials and crew charges
Providing Metal sheet roof in the existing open terrace of Pump house and Panel Board Room in Kasimedu SPS Area IV,
Supplying of MS Square/ rectangular hallow pipe of 4mm thick
MS plate for base
150x150mm 8mm thick
Supplying of metal sheet of thickness 0.47mm for roof top
Hiring cutting machine and welding units for cutting the steel tubes and welding whereever necessary
Labour charges for fixing the metal for roof and side portion including scaffolding charges where ever necessary
Labour charges for fixing vertical columns using U Clamps and CC masonry whereever necessary
Providing Metal sheet roof in the existing open terrace of Diesel Generator Room in Kasimedu SPS Area IV,
Supplying of MS Square/ rectangular hallow pipe of 4mm thick
MS plate for base
150x150mm 8mm thick
Supplying of metal sheet of thickness 0.47mm for roof top
Hiring cutting machine and welding units for cutting the steel tubes and welding whereever necessary
Labour charges for fixing the metal for roof and side portion including scaffolding charges where ever necessary
Labour charges for fixing vertical columns using U Clamps and CC masonry whereever necessary
Providing Metal sheet roof in the existing open terrace of Pump house in Kasimedu SPS Area IV,
Supplying of MS Square/ rectangular hallow pipe of 4mm thick
MS plate for base
150x150mm 8mm thick
Supplying of metal sheet of thickness 0.47mm for roof top
Hiring cutting machine and welding units for cutting the steel tubes and welding whereever necessary
Labour charges for fixing the metal for roof and side portion including scaffolding charges where ever necessary
Labour charges for fixing vertical columns using U Clamps and CC masonry whereever necessary
Attending Leak rectification work in the existing roof terrace of SPS in Kasimedu Area IV.
Leak Rectification Work
Supplying and filling tiles in the minute gaps in between the flat tiles/country tiles and tiles top surface where ever necessary at SPS Roof
Painting primary coat on plaster surface
Painting two coats( smart care damp proof advanced) over the one coat of primer
Misellaneous Item
Supplying and erecting rolling shutters of 76mm 18 gauge of galvanised steel sheet with push and pull or self coiling type operated by pulling hook with top cover including locking arrangements etc., at Diesel Generator Room
Providing Ground water arrangements through bore well using hand bore set boring 150mm dia and erecting 110mm dia PVC plain/slotted pipe upto water column as per IS 12818/1992 and filling the gap all around the 110mm PVC pipe with pebbles the entire column to be cleaned and developed as directed and erecting 1HP submersible pump and drawing ground water through 25mm dia PVC pipe to the existing syntex tank at roof top of the rest room.
Reconstruction of Collapsed compound wall at Melpattadai SPS in Area IV.
Labour charges for removing the debris from the site for reconstruction of compound wall using JCB
Earth work excavation in all kinds of soil as per SS 20B For Columns for gate pillar
Supplying and filling crushed stone sand (M-sand) for foundation and basement including watering consolidating, ramming etc., complete For Columns
C.C 1:4:8 using crushed stone sand(M sand) and 40mm gauge hand broken stone jelly for P.C.C work. Including laying in layers of not more than 15cm thick including ramming, curing, etc, complete For columns
C.C 1:2:4 using crushed stone sand(M sand) and 20mm gauge hand broken stone jelly for P.C.C work. Including laying ramming, curing, etc, complete For pile foundation and basement
Providing form work with centering for soffits for reinforced cement concrete slabs or plain surface including strutting upto 3mts high
Supplying fabricating and laying in position MS rounds or RTS for RCC works including cost of reinforcements binding wire, cutting bending, cranking and laying in position with binding wire assembly etc.,
Brick Masonry in CM 1:3 using II class bricks
Plastering with CM 1:3 for 15mm thick including curing etc.,
Band course work flat 12mm thick and 75mm deep with CM 1:3 including curing etc.,
Wiring with 2.5 Sqmm PVC unsheathed copper SC cable in conduit pipe for main continuous earth connection by 14SWG TC wire
Run of 2.5sqmm PVC unsheathed copper SC cable in conduit pipe for main continuous earth connection by 14 SWG TC wire
Supplying and fixing ofLED tube light fixture 18 watts 4 feet LED fitting
Supplying and fixing 80 Watts wall mounted LED lamp around the pump house
Supplying and fixing 0.43 Cu.m of broken glass pieces on copping of compound wall with CM 1:3 20mm tjocl omc;idomg ciromg etc complete
Painting with two coats of ready mixed Plastic emulsion paint first class quality and of approved colour over a painting coat including thorough scrapping clean removal of dirt etc complete and including necessary plaster of paris, putty, etc whenever required
Miscellaneous Item
Brick work in CM 1:3 using II class bricks including curing etc., at suction wall
Plastering with CM 1:3 for 15mm thick including curing etc.,
Distembering two coat (Aquatinta distember oil bond)
Scrapping and painting the existing steel girder at grid well and suction well using scaffolding whereever necessary
Supplying and filling debris in the existing pump pit and white washing and colour washing in the pump house at Melpattadai SPS in Area IV.
Dismantling the existing RCC platform pump pit
Supplying and filling debris in the existing pump pit
Supplying and filling quarry dust in the existing pump pit
CC 1:3:6 using crushed stone sand and 40mm gauge hand broken stone jelly for PCC works
Granolithic flooring 50mm thick with CC 1:2:4 using 3-10mm chips and top surface rendered smooth with cement etc.,
Brick work in CM 1:3 using II class bricks for 23cm thick wall including curring etc.,
RCC jally works 50mm thick in CC 1:2:4 excluding cost of reinforcement but including moulding curing etc complete
Plastering with CM 1:3 for 15mm thick including curing etc.,
Special ceiling plastering for RCC slabs and beams ( approx)
White washing two coats
Super cem colour washing two coats
Painting with two coats ready mixed plastic emulsion paint
Reparing,White Washing ,Colour washing and painting in Kadumbadiamman SPS at Area IV
Painting with two coats of ready mixed plastic emulsion paint first class quality and approved colour over a priming coat including thorough scrapping clean removal of dirt etc completeand including necessary plaster of paris, putty etc wherever required
Old Iron work two coat
Attending leak rectification works in the existing terrace at Pump House, Reconstruction of dilapidated valve chamber, Removing the existing unused pumpsets from pump pit with specials & pipe fittings and refilling the pump pit including necessary civil works at MKB Nagar LT sewage pumping station in Area-IV
Repair Works in Terrace
Hiring hand jack drilling machine for removing the crack developed flat tiles and weathering course in the existing roof of Pump House.
Engaging Labours for removing debris from the existing terrace and disposing from the site
Mazdoor Category I
Mazdoor Category II
Concrete with broken brick jelly 20mm gauge in pure slacked lime over RCC roof slab in the proportion of 32:12 1/2 ( No sand to be used ) well beaten with wooden beaters to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace Flooring with two course of flat tiles of 15x15x12mm in CM 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortar roof at Pump House
Refilling the pump pit
Disjointing and removing the unused centrifugal pumpsets in pumpit using welding units to disjoint the rusted bolts and nuts and base frame from existing suction pipe line including cost of lifting charges using heavy duty crane etc., complete as per site condition.
Supplying and fixing of various size of MS Dummy plates with necessary gasket and bolts & nuts
Supplying conveying and filling Masonry rubbish in the existing pump pit.
Supplying conveying and filling quarry dust in the existing pump pit
Laying CC 1:3:6 using 20mm BG jelly for PCC works
Granolithic Flooring 50mm thick with CC 1:2:4 using 3 to 10mm chips and top surface rendered smooth with cement
Miscellaneous Item
Removing the existing wooden windows from the SPS Building
Supplying and fabricating and fixing in position of anodised natural colour matt finish sliding window in two track
Supplying and fixing PVC Door with frame of size 2.0x0.8mtr with locking arrangements
White washing, colour washing and painting in Kannadasan Nagar SPS at AREA-IV.
Painting with two coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc, complete and including necessary plaster of paris, putty, etc wherever required
Painting with superior quality ready mixed paint of choclate light green,gray or anyother approved colours Old Iron work Two coat
White washing, colour washing and painting in Thendral Nagar SPS at AREA-IV.
Painting with two coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc, complete and including necessary plaster of paris, putty, etc wherever required
Painting with superior quality ready mixed paint of choclate light green,gray or anyother approved colours Old Iron work Two coat
Repairing, Providing Aluminium doors and windows, White washing, Colour Washing and painting in Thiruvalluvar Nagar SPS at Area IV
Painting with two coats of ready mixed plastic emulsion paint first class quality and approved colour over a priming coat including thorough scrapping clean removal of dirt etc completeand including necessary plaster of paris, putty etc wherever required
Painting Old Iron work two coats
Providing Aluminium windows
Providing Aluminium Door
Flooring with 100mm thick base cement concrete 1:4:10 using 40mm gauge hard broken stone jelly including laying, ramming, curing etc complete.
Granolithic flooring 50mm thick with CC 1:2:4 using 3-10mm chips and top surface rendered smooth with cement including thrad lining and 25 mm dia GI pipe of necessary length for water outlet curing etc complete.
Providing Aluminium doors and windows, White washing, Colour Washing and painting in Kamarajsalai SPS at Area IV
Painting with two coats of ready mixed plastic emulsion paint first class quality and approved colour over a priming coat including thorough scrapping clean removal of dirt etc completeand including necessary plaster of paris, putty etc wherever required
Painting Old Iron work two coats
Providing Aluminium windows
Providing Aluminium Door
Flooring with 100mm thick base cement concrete 1:4:10 using 40mm gauge hard broken stone jelly including laying, ramming, curing etc complete.
Granolithic flooring 50mm thick with CC 1:2:4 using 3-10mm chips and top surface rendered smooth with cement including thrad lining and 25 mm dia GI pipe of necessary length for water outlet curing etc complete.
Demolition and Reconstruction of suction well and collection well cum screen well with 8m depth and 4 m dia and allied works at Nehru Nagar SPS
Grit/Screen Chmaber
Dismantling of Existing Well
Hiring and running charges for JCB and site clearance
Head Mazdoor
Mazdoor Category - I
Removal of Demolished Debris out side the site Vicinity Using Tipper
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining.
From 1.0m above ground level to 3.0m below ground level (Curved surface)
4 m to 5 m below GL
5 m to 6 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (M sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.0m above ground level to 1.5m below ground level
From 1.5m to 4.5m below ground level
From 4.5m to 9.0m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
4.5m to 9m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.2 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water.
3m dia well
First depth of 2m
Second depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
4.5m to 9m depth
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works .
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supplying and fixing C.I.steps.
Colour washing two coats over one coat of white washing
Supply and erection of Cast Iron single faced manually operated rising type 400mm dia penstock with extension rod of 5.5m length conforming to relevant IS with IS markings on it, having cast iron door and frame with Gunmetal seating, spindle made of Stainless steel, CI head stock with gear arrangment and hand wheel fitted in well.
Supplying and fixing SS screen of grade 316. The screen shall be fabricated out of stainless steel flats of 50 x 10mm. The outer frame also shall be of 50 x 10mm fixed inside the well for seating the screen. The screen shall be so fabricated that the inclined portion of the screen is fixed and the horizontal portion of the screen is a removable one for lifting the pump for maintenance purpose. Outer frame and 50x10mm SS flats spaced at 35mm centre to centre to serve bar screens inside the screen well
Supply and installation of SS open mesh flooring with 25x6mm thick flats for outer frame and 25x3mm SS and 12x3mm SS flats spaced at 30mm and 60mm respectively and 50x10mm SS flats for mesh support and 50x50x6mm SS angle for opening forming a mesh over the surface of the well etc,complete
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Suction Well
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining. - curved surface
From 1.0m above ground level to 3.0m below ground level - curved surface
7 m to 8 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (M sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.5 m above ground level to 1.5 m below ground level
From 1.5m to 4.5m below ground level
From 4.5m to 9.0m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
4.5m to 9m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.20 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water.
4.5m dia well
First depth of 2m
Second depth of 2m
Third depth of 2m
Fourth depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
4.5m to 9m depth
9m to 13.5m depth
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works .
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supply and erection of Cast Iron single faced manually operated rising type 400mm dia penstock with extension rod of 5.5m length conforming to relevant IS with IS markings on it, having cast iron door and frame with Gunmetal seating, spindle made of Stainless steel, CI head stock with gear arrangment and hand wheel fitted in well.
Supplying and fixing C.I.steps.
Colour washing two coats over one coat of white washing
Supply and installation of SS open mesh flooring with 25x6mm thick flats for outer frame and 25x3mm SS and 12x3mm SS flats spaced at 30mm and 60mm respectively and 50x10mm SS flats for mesh support and 50x50x6mm SS angle for opening forming a mesh over the surface of the well etc,complete
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Construction of Column & Erection of ISMB
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m etc. complete.
Upto 2.0 m below GL
From 2.0 m to 3.0 m below GL
Supplying and filling sand (M sand) for foundation and basement including watering, consolidating, ramming etc. complete.
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
1.5 m to 4.5 m below GL
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high.
Upto 3.0 m height above and below GL
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (using SRC) for reinforced cement concrete using Crushed stone sand (M-sand) structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the Board officers complete.
Upto 1.5 m below GL
From 1.5 m to 4.5 m below GL
Upto 1.5 m above GL
From 1.5 m to 4.5 m above GL
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works .
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand) & SRC for 12mm thick including curing, etc., complete
Colour washing two coats over one coat of white washing
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations & basement
Disposal of surplus earth
Supply and fixing ISMB 300mm of 42.2kg/m for 5.5m on column over screen/grit well
Supply and fixing ISMB 400mm of 66.3kg/m for 9m on column over suction well
Erecting pulley block of 2 Tonne capacity with a 3 m chain including additional chain length of 11 m facilitate for horizontal movement on the beam etc complete
Erecting pulley block of 1 Tonne capacity with a 3 m chain including additional chain length of 9 m facilitate for horizontal movement on the beam etc complete
Painting with superior quality ready mixed paint of chocolate, light green, grey or any other approved colour over ISMB (for new iron work two coats).
Valve chamber
Earth work excavation in all kinds of soils except hard rock requiring blasting inclusing of shoring strutting and bailing out water whereever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing surplus earth within in compound in places as shown by the departmental officers clearing and levelling the site with initial lead of 10mts. and lift of 2m etc. complete.
Upto 2 m below GL
From 2 m to 3 m below GL
From 3 m to 4 m below GL
Supplying and filling Crushed stone sand (M-sand) for foundations and basement including watering consolidating ramming, etc., complete
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
From 1.5 m to 4.5 m below GL
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications.
Upto 3 m below GL
3 m to 4 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M25 grade (M- sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
Upto 1.5 m below GL
From 1.5 m to 4.5 m below GL
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete.
From 1.5 m to 4.5 m below GL
Precast slab in Cement Concrete 1:2:4 using 12-20mm BG jelly for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing, etc., complete. (100 mm thk)
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand) & SRC for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand) & SRC for 12mm thick including curing, etc., complete
Refilling with excavated soil (other than sand) compling with standard specification for filling in foundation and basement etc. complete
Disposal of surplus earth
Supplying and fixing C.I.steps.
Interconnection work
Supply, delivery, laying and jointing for interconnection of screen cum grit well and suction well with CI pipes 400 mm dia pipe 4.0m depth
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly & SRC for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete for End concrete. 1.5m to 4.5m below GL
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications at 4.0m depth
INTERCONNECTION BETWEEN TERMINAL MANHOLE AND SCREEN-CUM-GRIT WELL
Supply, delivery, laying and jointing of Double wall corrugated /structured wall plastic polyethylene/polypropylene pipes CI PE or PP of class SN-8 with non-smooth external Annular Corrugated and Smooth Internal Surfaces in Standard lengths with online coupler and spigot type confirming to IS 16098 (Part-2) 2013 / EN: 13476-3 (latest revision) including elastomeric sealing ring gasket suitable for DWC PE or PP pipes conforming to IS: 5382 (latest revision), freight,insurance, loading into the truck and transporting to the stores / site.. etc including earth work excavation in hard stiff clay,stiff black cotton,hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with initial lead of 10m and lowering into trenches, aligning and testing of DWC PE or PP pipes, watering and ramming to consolidation, etc., complete. (For Gravity Sewers) 400mm dia pipe at 4.0m depth
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly & SRC for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete for End concrete. 1.5m to 4.5m below GL
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications at 4.0m depth
Supplying and filling with stone dust for bedding for a thickness of 10cm and back fill envelope for a thickness of 150mm above the crown of the pipe for DWC PE pipes including ramming, consolidation etc., complete
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations and basement.(for CI PE or PP pipe length)
Disposal of surplus earth (for CI PE or PP pipe length)
Pipes & specials
100 mm dia CI d/f duckfoot bend
150 x 100 mm CI D/F taper
150 mm dia CI - 3.0m d/f pipe
150 mm dia CI - 2.5m d/f pipe
150 mm dia CI - 2.0m d/f pipe
150 mm dia CI - 1.5m d/f pipe
150 mm dia CI - 1.0m d/f pipe
150 mm dia CI - 0.5m d/f pipe
150 mm dia CI d/f 90 deg bend
150 mm dia CI - 2.0m d/f pipe
150 mm dia CI - 0.5m d/f pipe
150 mm dia CI sluice valve
150 mm dia CI - 0.5m d/f pipe
150 mm dia CI non-return valve
250 x 150 mm CI D/F taper
500x250mm CI A/F tee
350 mm dia CI - 0.5m d/f pipe
350x300mm CI D/F taper
300 mm dia CI sluice valve
350 mm dia CI fl/spi TP
350 mm dia Blank flange
Jointing the C.I.Double flanged pipes and specials with rubber insertion to the required specifications with M.S. bolts and nuts, complete and testing the pipies to the required pressure with water (including cost of jointing materials) For depth upto 2m,
350mm dia
150mm dia
100mm dia
300mm dia
250mm dia
Demolition and reconstruction of building and allied works at Muthamil Nagar SPS in Area-IV
DISMANTLING AND CLEARING SITE
Brick or stone masonry in cement mortar walls under 3.00m high
R.C.C. Work (Dismantling)
Doors and windows including removal of frames hinges and fastenings
construction of building
Excavation Work
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Sand Filling
Supplying and filling Crushed stone sand (M-sand) for foundations and basement including watering consolidating ramming, etc., complete
Cement concrete 1:2:4 using Crushed stone sand (M?sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing, etc.,complete.
Centering Works
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
RCC Works
Cement concrete 1:1 ½:3 using 20mm gauge hard broken stone jelly for reinforced cement concrete works excluding cost of steel, centering, shuttering and cost of steel reinforcement but including laying in position,compacting, curing, finishing, etc., complete
Reinforcement Works
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786- 2008,including fixing with binding wires, assembling and laying in position for all RCC works as follows 8mm dia rod (Fe-500D Grade with CRS material)
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786- 2008,including fixing with binding wires, assembling and laying in position for all RCC works as follows 10mm - 32mm dia rod (Fe-500D Grade with CRS material)
Brick Work
Stock brick work with II class bricks in cement mortar 1:3 (Crushed stone sand (M-sand)) for 23 cm thick wall including curing etc. complete
Extra labour for 11 cm thick wall
Plastering Work
Plastering with cement mortar 1:3 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Doors and Ventilator
Supply and fixing of PVC Door and Frame cost including material, labour, transport, tools and tackles etc.,complete.
Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of size (Frame : Section - 101.60 x 44.45 x 3.18 mm @ 2.399 Kg/m, Shutter : Top, Middle, Vertical style 50 x 44.45 x 2.5mm @ 1.292 Kg/m, Bottom - 100 x 44.45 x2.5mm @ 1.974 Kg/m) with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides, floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.All the materials should be got approved by the Site Engineer before fixing as directed.
Maufacturing supplying and fixing in position Anodised Alu. Natural colour mat finish with openable type window with extruded Alu. Sections with two panels of size (Frame - 38 x 33 x21 x 2.4mm @ 0.615 Kg/m, Shutter: Bottom, Top - 38.5 x 33 x 24.5 x 3 & 4mm @ 0.706 Kg/m, Interlocking vertical - 59 x 33 x 25 x 2.5mm @ 1.135 Kg/m) with necessary accessaries such as rubber beadings best quality of lock handle hinges,stays and fixing 4 mm thick plain / frosted/ pin headed glass including cost of all materials labour for electrical consumption required for drilling holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the Board officers. The Al.Surfaces is to be anodised with matt finish usder electrically condition in accordance with ISI1868/1962 specification for an average anodic film thick of not less than 15 microns. (All materials should be got approved by the Site Engineer before fixing in position)
Supplying and fixing in position of aluminium anodised colour matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans for louvers 4mm thick Al. Clips, including all materials, labour & power consumption charges required for fabrication if necessary chipping dismantling making holes in RCC columns,beams or masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc., complete. The Aluminium surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than15 microns (fifteen) for all sections. All the materials should be got approved by the Site Engineer before fixing in position as directed.
Supplying and erecting rolling shutters of 76mm 18 gauge of galvanised steel sheet with push and pull or self coiling type operated by pulling hook with top cover including locking arrangements and fixed in position inside or outside, etc., complete and painting with priming coat of redoxide without lock. (payment will be made by only for the actual opening of the shutters are rolled up wherever the shutters are to be fixed)
Supply and Application of ReArm Coat ZP.It is a two Component System based on metallic Zinc and epoxy resin based the cost is including material,labour,tools and tackles etc.,complete. (Painting Co-Efficeint 1.1 Each Side)
Tile Laying Work
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick laid in CM 1;2, 10mm thick and pointing with white cement using 0.4 Kg/m2 including finishing the joint and pointing flush with tile surface, etc., complete
Paving the floor with palin/design ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement
Painting Works
Painting two coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including through scrapping clean removal of dirt, etc;complete and including necessary plaster of paris ,putty,etc; where ever required.
Plumbing Works
Supply and fixing of 500 Litre Sintex tank cost including material, labour, transport, tools and tackles etc., complete.
Supply and fixing of 0.5HP monoblock Singlephase motor with 0.75KW,220v and the power of 50Hz cost including material , transport ,labour ,tools and tackles etc complete
Providing and fixing white glazed European water closet with rose wood seatings (Black) low level flushing tank with fittings, etc., complete.
Supply and fixing 55cm x 40cm colour glazed wash basin white Glazed with lead and brass connection C.P pillar tap, lead waste pipe, C.P. plug with single chain, etc., complete.
Supply and fixing of Angle cock with wall flange of approved quality cost including materials, labour, tools and Tackels etc., complete
Supply and fixing of BIB Cock with wall flange of approved quality cost including materials, labour, tools and Tackels etc., complete
Providing and fixing 75mm dia Nahini trap (floor trap) with brass gratings
Supplying of 110 mm dia OD PVC Pipe
Supply and Fixing of 20mm dia PVC Pipe with Pipe bend for Supply of water to Shower with necessary Fittings Cost including material, labour, tools and tackles, etc., complete.
Supply and Fixing of 25mm dia PVC Pipe with Pipe bend for Supply of water to Shower with necessary Fittings Cost including material, labour, tools and tackles, etc., complete.
Supply of 110 mm dia PVC Coupler
Supply of 110 mm dia PVC Elbow
Fitter(pipe laying/Bar bending) II Class
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Re-filling the excavated earth
Disposal of surplus earth
Supply and Fixing of Health Faucet cost including material, labour, tools and tackles etc., complete.
Supply and Fixing of Shower cost including material, labour, toolsa and tackles etc., complete.
Electrical work
20W 4 Feet LED fitting with LED
Wiring with 2.5 sq.mm PVC unsheated copper single core cable in suitable conduit pipe for fans with 5 amps single pole switch MS joint box and MS switch box in flush with all and covered with PVC sheet of 3mm thick continuous earth wire connection by 14 SWG tinned copper wire.
Supplying & laying of 3 ½ core 25 sq.mm. LTUG cable in a trench to be excavated at a depth of 2 ½ ' putting 6” layer of sand and covering the cable with brick and sand refilling the earth to make good
Electrical Maistry
DG Foundation
Cleaning and Chipping the entire surface Cost including material, labour, tools and tackles etc., complete
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m
Supply and filling crushed stone sand (M sand ) for foundation and basement including watering consolidation ramming etc., complete
Cement concrete 1:1½:3 using Crushed stone sand(M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing,etc.,complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shtrutting up to 3 m high
Cement concrete1:1½:3 using Crushed stones and (M-sand)and 20mm gauge hardbroken stonejelly for reinforcedcement concreteworks excluding cost of steel,centering,shuttering and cost ofsteel reinforcement butincluding layingin position,compacting, curing, finishing, etc., complete
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires ,assembling and laying in position for all RCC works as follows
Plastering with cement mortar 1:5 (Crushed stone sand (M-sand)) for 20mm thick including curing, etc., complete
Disposal of Surplus Earth
White washing and colour washing at Tondiarpet "A" pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Pointing with cm 1:3 flush pointing brick work white washing colour washing & distembering Note: same rate for walls and ceilings
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
White washing and colour washing at Seniamman Koil Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
White washing and colour washing at Ranganathapuram Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
White washing and colour washing at Sinagarvelan Nagar Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
White washing and colour washing at Vinayagapuram Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
white washing and colour washing and its allied works at R.K Nagar North sewage pumping station in Area -IV
Painting with two coats of ready mixed plastic emulsion paint first class quality and approved colour over a priming coat including thorough scrapping clean removal of dirt etc., complete and including necessary plaster of paris,putty, etc., wherever required.
Painting two coat iron work(Enamel Paint)
Thorough scrapping of old plastered surface
Washing of plastered surface with soap,soda and water or with sodalime, brush and water
Removing of old paint from doors,windows and wood works by manual labour
White washing and colour washing and its allied works at Tondiarpet'D' sewage pumping station in Area -IV
Washing of plastered surface with soap,soda and water or with sodalime, brush and water
Thorough scrapping of old plastered surface
Painting with two coats of ready mixed plastic emulsion paint first class quality and approved colour over a priming coat including thorough scrapping clean removal of dirt etc., complete and including necessary plaster of paris,putty, etc., wherever required.
Removing of old paint from doors,windows and wood works by manual labour
Painting two coat iron work(Enamel Paint)
Painting for pipe line and specials for wall chamber including material units with labour charges etc., complete
White washing and colour washing at DBK chetti street Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
White washing and colour washing at Tondiarpet F old Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
White washing and colour washing at CB Road Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
White washing and colour washing at Tondiarpet F New Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
White washing and colour washing at Erukkencherry Sewage pumping Station in Area-IV
Painting with tow coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc., whereever required.
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
Construction of compound Wall for a length of 200 meters at Kannadasan Nagar 6th main road opposie to kannadasan Nagar Sewage Pumping Station and its allied works at kannadasan Nagar Headworks in Area IV
Clearing heavy jungle
Earthwork excavation and depositing on bank with initial lead of 10 metres and initial lift 2.00m (in all type of strata) in hard stiff clay stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth and earth mixed with small size boulders S.S. 20-B. (excluding timbering and bailing out sub-soil water)
Upto 2.0 m below GL
Supplying and filling M-sand for foundation and basement including watering, consolidating, ramming etc. complete.
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Upto 1.5 m below GL
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
Upto 3 m above and below GL
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using Crushed stone sand (M-sand) and 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the Board officers complete.
Upto 1.5 m below GL
Upto 1.5 m above GL
From 1.5 m to 4.5 m above GL
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works as follows
Brick work with Fly ash bricks in cement mortor 1:5 (Crushed stone sand (M-sand)) for 23 cm thick walls including curing etc. complete.
Upto 1.5 m above GL
From 1.5 m to 4.5 m above GL
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 12-20mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
From 1.5 m to 4.5 m above GL
20mm thick sand faced cement plaster on wall upto hight 10 meters above ground level consisting of 12mm thick backing coat of CM 1:3 ( 1 cement : 3 sand ) and 8mm thick finishing coat of CM 1:1 ( 1 cement : 1 sand ) etc complete
Colour washing two coats over one coat of white washing
Supplying and fixing 0.43 cu.m. of broken glass pieces on the coping of the compound wall with C.M. 1:3, 20mm thick including curing, etc., complete as directed
Supplying and fixing barbed wire fencing over the proposed compound wall with ‘L’ angle iron 50 x 50 x 6mm & 1.45m posts bent to shape at 2.5m centres with 6 rows of barbed wire and also in a zig zag manner at 25cm c.c. connecting all the rows with barbed wire will be of 2 ply and 12 gauge or other approved size including drilling hole in ‘L’ iron posts and fixing the posts in cement concrete 1:2:4 of size 15x15x45cm etc as directed.
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations and basement
Disposal of surplus earth
Supplying and fabricating and erection of iron gate with of required size as per direction at site with G.I pipes of 50 mm and specials at all sides and 40x40x6mm angles as bracing on which 2 No.of m.s sheet of 16 gauge of size 2x2m each is welded as two halves fixing letter ''METROWATER' including one coat of primer with red lead etc.compete as directed.
Painting with two coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessaary plaster of paris, putty, etc., wherever required.
Construction of Compound wall and its allied works at Muthamil Nagar Headworks in Area IV
Clearing heavy jungle
Earthwork excavation and depositing on bank with initial lead of 10 metres and initial lift 2.00m (in all type of strata) in hard stiff clay stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth and earth mixed with small size boulders S.S. 20-B. (excluding timbering and bailing out sub-soil water)
Upto 2.0 m below GL
Supplying and filling M-sand for foundation and basement including watering, consolidating, ramming etc. complete.
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Upto 1.5 m below GL
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
Upto 3 m above and below GL
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using Crushed stone sand (M-sand) and 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the Board officers complete.
Upto 1.5 m below GL
Upto 1.5 m above GL
From 1.5 m to 4.5 m above GL
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works as follows
Stock brick work with II class bricks in cement mortor 1:5 (Crushed stone sand (M-sand)) for 23 cm thick walls including curing etc. complete.
Upto 1.5 m above GL
From 1.5 m to 4.5 m above GL
Band course work flat 10mm to 12mm thick and 50mm deep with C.M. 1:3 (Crushed stone sand (M-sand) including curing, etc., complete as directed
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 12-20mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
From 1.5 m to 4.5 m above GL
20mm thick sand faced cement plaster on wall upto hight 10 meters above ground level consisting of 12mm thick backing coat of CM 1:3 ( 1 cement : 3 sand ) and 8mm thick finishing coat of CM 1:1 ( 1 cement : 1 sand ) etc complete
Colour washing two coats over one coat of white washing
Supplying and fixing 0.43 cu.m. of broken glass pieces on the coping of the compound wall with C.M. 1:3, 20mm thick including curing, etc., complete as directed
Supplying and fixing barbed wire fencing over the proposed compound wall with ‘L’ angle iron 50 x 50 x 6mm & 1.45m posts bent to shape at 2.5m centres with 6 rows of barbed wire and also in a zig zag manner at 25cm c.c. connecting all the rows with barbed wire will be of 2 ply and 12 gauge or other approved size including drilling hole in ‘L’ iron posts and fixing the posts in cement concrete 1:2:4 of size 15x15x45cm etc as directed.
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations and basement
Disposal of surplus earth
Supplying and fabricating and erection of iron gate with of required size as per direction at site with G.I pipes of 50 mm and specials at all sides and 40x40x6mm angles as bracing on which 2 No.of m.s sheet of 16 gauge of size 2x2m each is welded as two halves fixing letter ''METROWATER' including one coat of primer with red lead etc.compete as directed.
Painting with two coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessaary plaster of paris, putty, etc., wherever required.
Providing Paver block at DBK chetti street sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Tondiarpet A sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Vinayagapuram nagar sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Singaravelan nagar sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Tondiarpet D Sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Seniamman Koil Sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Tondiarpet E Sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at kadumbadi Amman sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Ranganathapuram sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Vyasarpadi lake Area Sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Thiruvalluvar Nagar sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Kannadasan Nagar sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Poongavanam Nagar sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Thendral Nagar sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Muthamil Nagar sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at RK Nagar South sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at MKB Nagar sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Kasimedu sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at RK Nagar North sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Melpattadai sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at CB road sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Paver block at Veerakutty Street sewage Pumping Station in Area IV
Concrete Interlock Block Works
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Providing laying, Spreading and compactingGranular Sub Base
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete
Supplying and fixing Interlocking Blocks against available edge restraints 80 mm thick of approved Design and pattern of Strength 40N/Sq.m., manufactured by mechanical or hydraulic machine using vibro compaction process and laid over 200 mm thick laying course (bedding) river sand well compacted by plate compactor with a joint width of 2 mm to 5 mm including filling of all joints with river sand and compacting the paved surface with plate compactor two or three times until all the unit to unit joints are completely filled with river sand and trimming the edges neatly including all labour charges and plate compactor charges etc., complete.
Providing Cement concrete road at Tondiarpet A Sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at Thiruvalluvar Nagar Sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at Vyasarpadi Sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at CB Road SPS sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at kadumbadi Amman Sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at Vyasarpadi Lake Area sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at Muthamil Nagar Sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at RK Nagar South Sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at RK Nagar North Sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement concrete road at MKB Nagar Sewage Pumping Station in Area-IV
Concrete Interlock Block Works
Hiring JCB for clearing and levelling the existing earthan road
Earth work excavation and depositing on bank with initial lead of 10 mtrs. and initial lift of 2 mtrs. in hard stiff clay, stiff black cotton hard earth, shales murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:4:10 using crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain concrete works including laying in layers of bot more than 15cm thick including ramming, curing, etc complete
Stock brick work with II class bricks in lime mortar 1:2 (crushed stone sand (M-sand)) for ever 23 cm thick wall etc complete
Plastering with cement concrete mortar 1:3 (Crushed stone sand (M-sand)) for 12mm thick including curing, etc complete
Painting primary coat on new plaster surface
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material with water at OMC in MechanicalMix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, ete., Complete as per clause 406 of MoRT and H specifications. (COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Supplying and filling crushed stone (M-sand) for foundation and basement including watering consolidating, ramming etc complete
Cement concrete 1:2:4 using crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying, ramming, curing, etc complete
Providing Cement Concrete road and its allied works at Patel Nagar WDS
Hiring of Power jack hammer fitted with tractor including fuel, operator charges, transportation etc., complete to dismantle the damaged concrete as per site condition
Charges towards clearing the dismantled concrete / bebris from the site including loading, transportation etc., complete.
Hire charges to mechanical JCB for excavtion, levelling the site etc., complete
Providing laying, Spreading and compacting Graded Stone aggregate to Wet Mix macadam specification including premixing the material (0.396 Cu.m of 45 22.4mm Metal, 0.528 Cu.m of 22.4 2.36mm Metal, 0.396 Cu.m of 2.36 mm Size and below) with water at OMC in Mechanical Mix Plant Carriage and transporting the mixed material by tipper to site, laying in uniform layers with pavers in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density, Complete as per clause 406 of MoRT and H Specifications.(COMPACTION BY VIBRO MAX ROLLER IS A MUST)
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concerete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Cement concrete 1:11/2:3 using crysged stone sand (M-sand) and 20 mm gauge hard broken stone jelly for reinforced cement concrete works excluding cost of steel, centering, shuttering and cost of steel reinforement but including laying in position, compacting, curing, finishing, etc complete
Providing cement concrete water table 300mm X 40mm thick with broken stone jelly 20mm (ISS Size) gauge in cement concrete 1:2:4 and rendering smooth with cement at 10kg/10sqm and laying in position to proper level and thread lining curing, etc., complete
Re Construction of Rest Room of size 1.5 mts x 2.0 mts inside Thendral Nagar SPS in Area-IV.
Earth work excavation in all kids of soil as per SS20B
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating and laying in position M.S or R.T.S rods.
Providing Form Work
Brick work in C.M 1:3 using II class brick for 23cms thick.
Brick work in C.M 1:3 using II class brick for 11.5cm thick wall including curring etc.,
Plastering with C.M 1:3 for 15mm thick
Supplying and filling sand for formation and basement including weathering, consolidation etc.,
Supplying and filling quarry dust including compacting watering etc., complete.
C.C 1:4:8 using 40mm gauge H.B stone jelly for basement including curing etc.,
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 150mm dia P.V.C Rain water downfall pipe including cost of 110mm P.V.C pipe shoe bend, bracket and Teak wood plugs etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
Supplying and fixing 20mm dia wheel valve.
Providing and fixing colour glazed Indian water closet with fittings etc., complete.
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10cm S.W gully trap with silt pit diaphragm arrangements etc.,
Supplying anf fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing and testing 100mm dia S-Wp including earth work excavation and refilling the trench etc.,
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
Supplying and fixing RCC Jally
Providing ground water facilities for the rest room by using bore well including erection of 1 HP submersible pumpset with accessories and supply and fixing 500Lit capcity syntex tank over the rest room etc.,
Re Construction of Rest Room of size 1.5 mts x 2.0 mts inside Kamaraj Salai SPS in Area-IV.
Earth work excavation in all kids of soil as per SS20B
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating and laying in position M.S or R.T.S rods.
Providing Form Work
Brick work in C.M 1:3 using II class brick for 23cms thick.
Brick work in C.M 1:3 using II class brick for 11.5cm thick wall including curring etc.,
Plastering with C.M 1:3 for 15mm thick
Supplying and filling sand for formation and basement including weathering, consolidation etc.,
Supplying and filling quarry dust including compacting watering etc., complete.
C.C 1:4:8 using 40mm gauge H.B stone jelly for basement including curing etc.,
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 150mm dia P.V.C Rain water downfall pipe including cost of 110mm P.V.C pipe shoe bend, bracket and Teak wood plugs etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
Supplying and fixing 20mm dia wheel valve.
Providing and fixing colour glazed Indian water closet with fittings etc., complete.
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10cm S.W gully trap with silt pit diaphragm arrangements etc.,
Supplying anf fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing and testing 100mm dia S-Wp including earth work excavation and refilling the trench etc.,
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing wall mounted 20 WATT LED with fittings
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
Supplying and delivery and fixing of HDPE tank as per IS 12701/1996 including loading and unloading transportation and labour charges for fixing GI pipes and specials (500 litres)
Supplying conveying and erecting 1HP submersible pumpset in the existing tank/open bore well including all accessories
Attending repair works in the existing Rest room inside Nehru Nagar SPs Area IV
Supplying and fixing 150mm dia P.V.C Rain water downfall pipe including cost of 110mm P.V.C pipe shoe bend, bracket and Teak wood plugs etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
Supplying and fixing 20mm dia wheel valve.
Providing and fixing colour glazed Indian water closet with fittings etc., complete.
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10cm S.W gully trap with silt pit diaphragm arrangements etc.,
Supplying anf fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing and testing 100mm dia S-Wp including earth work excavation and refilling the trench etc.,
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and clamping of 2 core 2.5sq.mm PVC LTUG cable by MS clamps on walls
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
Providing Steps at the entrance of Rest Room
Earth work excavation in all kinds of soil
Supplying and filling ( M Sand ) for foundation
CC 1:3:6 using 40mm BG Jelly for basement
Brick work using II class bricks in CM 1:3 for over 23cm thick
Plastering work in CM 1:3 for 15mm thick
Supplying and delivery and fixing of HDPE tank as per IS 12701/1996 including loading and unloading transportation and labour charges for fixing GI pipes and specials (500 litres)
Supplying conveying and erecting 1HP submersible pumpset in the existing tank/open bore well including all accessories
Re Construction of Rest Room of size 1.5 mts x 2.0 mts inside Kadambadi amman SPS in Area-IV.
Earth work excavation in all kids of soil as per SS20B
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating and laying in position M.S or R.T.S rods.
Providing Form Work
Brick work in C.M 1:3 using II class brick for 23cms thick.
Brick work in C.M 1:3 using II class brick for 11.5cm thick wall including curring etc.,
Plastering with C.M 1:3 for 15mm thick
Supplying and filling sand for formation and basement including weathering, consolidation etc.,
Supplying and filling quarry dust including compacting watering etc., complete.
C.C 1:4:8 using 40mm gauge H.B stone jelly for basement including curing etc.,
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 150mm dia P.V.C Rain water downfall pipe including cost of 110mm P.V.C pipe shoe bend, bracket and Teak wood plugs etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
Supplying and fixing 20mm dia wheel valve.
Providing and fixing colour glazed Indian water closet with fittings etc., complete.
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10cm S.W gully trap with silt pit diaphragm arrangements etc.,
Supplying anf fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing and testing 100mm dia S-Wp including earth work excavation and refilling the trench etc.,
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
Labour charges for dismantling the existing rest room of size 3.7x3.3mtr
Labour charges for cleaning the existing sump, brick work and plastering work whereever necessary
Supplying and erecting 1HP submersible pumpset in the existing sump including providing separate switch box and laying cable etc.,
Supplying and fixing 500 litre capacity HDPE tank including loading transportation and labour charges for fixing of the GI pipe and specials etc.,
Re Construction of Rest Room of size 1.5 mts x 2.0 mts inside Kasimedu SPS in Area-IV.
Earth work excavation in all kids of soil as per SS20B
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating and laying in position M.S or R.T.S rods.
Providing Form Work
Brick work in C.M 1:3 using II class brick for 23cms thick.
Brick work in C.M 1:3 using II class brick for 11.5cm thick wall including curring etc.,
Plastering with C.M 1:3 for 15mm thick
Supplying and filling sand for formation and basement including weathering, consolidation etc.,
Supplying and filling quarry dust including compacting watering etc., complete.
C.C 1:4:8 using 40mm gauge H.B stone jelly for basement including curing etc.,
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 150mm dia P.V.C Rain water downfall pipe including cost of 110mm P.V.C pipe shoe bend, bracket and Teak wood plugs etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
Supplying and fixing 20mm dia wheel valve.
Providing and fixing colour glazed Indian water closet with fittings etc., complete.
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10cm S.W gully trap with silt pit diaphragm arrangements etc.,
Supplying anf fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing and testing 100mm dia S-Wp including earth work excavation and refilling the trench etc.,
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
Labour charges for dismantling the existing dilapidated rest room and remove the debris from the site
Demolition of existing Toilet and Construction of New Toilet at Vyasarpadi SPS.
Dismantling and Clearing Site
Head Mazdoor
Mazdoor Category - I
Brick or stone masonry in cement mortar walls under 3.00m high
Dismantling RCC by manual / by using deploying machineries
Doors and Windows including removal of frames hinges and fastenings
Terrace work in roof or floor (Madras Terrace)
Dismantling of plain cement concrete
Construction of Toilet
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2 m in hard stiff clay stiff black cotton earth, shales murams, gravel stoney earth and earth mixed with small size boulders and hard gravelly soil.
Supplying and filling Crushed stone sand (M-Sand) for foundations and basement including watering consolidating ramming, etc., compete.
Cement concrete 1:2:4 using crushed stone sand (M-Sand) 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curting etc., complete.
Providing Wet mix macadam including premixing the material with water at OMC inmechanical mix plant carriage and laying in uniform layers and compacting etc. Complete as per clause 406 of MORT&H specifications
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works as follows 10mm -32 mm dia rod (Fe-500 D Grade with CRS material)
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
Cement concrete 1:1 ½:3 using 20mm gauge hard broken stone jelly for reinforced cement concrete works excluding cost of steel, centering, shuttering and cost of steel reinforcement but including laying in position, compacting, curing, finishing, etc., complete
Stock brick work with II class bricks in cement mortar 1:3 (Crushed stone sand (M-sand)) for over 23 cm thick wall including curing etc. complete
For Extra Labour for 11 cm thick wall
Plastering with cement mortar 1:3 (Crushed stone sand (M-sand)) for 15mm thick including curing, etc., complete
Supply and Fixing of PVC door cost including material, labour, tools and tackles etc., complete.
Supply and Fixing in Position of Aluminium anodised colour matt finish Louvered Ventilator. The Outer Frame will be 62x38x2mm @ 1.17 Kg/m and the Louvers with moving arrangements will be made with Alu.Channel of size 60 x 30 x 4 mm @ 1.27 Kg/m with necessary glass pans for Louvers 4mm thk Al.Clips,including all materials,labour & Power Consumption Charges required for fabrication if necessary chipping,dismantling making holes in RCC Column,beams or masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc., complete. The Aluminium Surface is to be anodised with mat finish under electrically controlled condition in accordance with ISI Specification 1868/1962 of anodic film thickness of not less than 15 microns(Fifteen) for all sections.All the materials should be got approved by the Site Engineer before fixing in position as directed.
Paving the floor with plain/design tiles (colour and shade as directed) of size 305mm x 305mm x 6mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and painted with same coloured cement
Dadooding walls with glazed tiles of sizes 15cmx15xmx6mm thick laid in CM 1:2, 10mm thick and pointing with white cement using 0.4 kg/m2 including finishing the joint and pointing flush with the surface etc., complete.
Painting with two coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessaary plaster of paris, putty, etc., wherever required.
Plumbing work
Supply and fixing of 500 Litre Sintex tank cost including material, labour, transport, tools and tackles etc., complete.
Providing and fixing white glazed European water closet with rose wood seatings (Black) low level flushing tank with fittings, etc., complete.
Supply and fixing of Long Body cock with wall flange of approved quality cost including materials, labour, tools and Tackels etc., complete
Supply and fixing of SS Grating of approved quality cost including materials, labour, tools and Tackels etc., complete
Providing and fixing 75mm dia Nahini trap (floor trap) with brass gratings
Supply of 110 mm dia OD PVC Pipe
Supply and Fixing of 20mm dia PVC Pipe with Pipe bend for Supply of water to Shower with necessary Fittings Cost including material, labour, tools and tackles, etc., complete.
Supply and Fixing of 25mm dia PVC Pipe with Pipe bend for Supply of water to Shower with necessary Fittings Cost including material, labour, tools and tackles, etc., complete.
Supply of 110 mm dia PVC Coupler
Supply of 110 mm dia PVC Elbow
Fitter(pipe laying/Bar bending) II Class
Supply and Fixing of Health Faucet cost including material, labour, tools and tackles etc., complete.
Supply and Fixing of Shower cost including material, labour, toolsa and tackles etc., complete.
Electrical work
20W 4 Feet LED fitting with LED
Wiring with 2.5 sq.mm PVC unsheated copper single core cable in suitable conduit pipe for fans with 5 amps single pole switch MS joint box and MS switch box in flush with all and covered with PVC sheet of 3mm thick continuous earth wire connection by 14 SWG tinned copper wire.
Supplying & laying of 3 ½ core 25 sq.mm. LTUG cable in a trench to be excavated at a depth of 2 ½ ' putting 6” layer of sand and covering the cable with brick and sand refilling the earth to make good
Electrical Maistry
Re Construction of Rest Room of size 2.0 mts x 1.0 mts inside DBK SPS in Area-IV.
Earth work excavation in all kids of soil as per SS20B
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating and laying in position M.S or R.T.S rods.
Providing Form Work
Brick work in C.M 1:3 using II class brick for 23cms thick.
Brick work in C.M 1:3 using II class brick for 11.5cm thick wall including curring etc.,
Plastering with C.M 1:3 for 15mm thick
Supplying and filling sand for formation and basement including weathering, consolidation etc.,
Supplying and filling quarry dust including compacting watering etc., complete.
C.C 1:4:8 using 40mm gauge H.B stone jelly for basement including curing etc.,
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 150mm dia P.V.C Rain water downfall pipe including cost of 110mm P.V.C pipe shoe bend, bracket and Teak wood plugs etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
Supplying and fixing 20mm dia wheel valve.
Providing and fixing colour glazed Indian water closet with fittings etc., complete.
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10cm S.W gully trap with silt pit diaphragm arrangements etc.,
Supplying anf fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing and testing 100mm dia S-Wp including earth work excavation and refilling the trench etc.,
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
Supplying and fixing RCC Jally
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Re Construction of Rest Room of size 1.5 mts x 2.0 mts inside Thondiarpet D SPS in Area-IV.
Earth work excavation in all kids of soil as per SS20B
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating and laying in position M.S or R.T.S rods.
Providing Form Work
Brick work in C.M 1:3 using II class brick for 23cms thick.
Brick work in C.M 1:3 using II class brick for 11.5cm thick wall including curring etc.,
Plastering with C.M 1:3 for 15mm thick
Supplying and filling sand for formation and basement including weathering, consolidation etc.,
Supplying and filling quarry dust including compacting watering etc., complete.
C.C 1:4:8 using 40mm gauge H.B stone jelly for basement including curing etc.,
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 150mm dia P.V.C Rain water downfall pipe including cost of 110mm P.V.C pipe shoe bend, bracket and Teak wood plugs etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
Supplying and fixing 20mm dia wheel valve.
Providing and fixing colour glazed Indian water closet with fittings etc., complete.
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10cm S.W gully trap with silt pit diaphragm arrangements etc.,
Supplying anf fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing and testing 100mm dia S-Wp including earth work excavation and refilling the trench etc.,
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
Hiring JCB for levelling the existing surface and for removing the light jungle
Supplying and fixing 1HP submersible pumpset in the existing sump and providing separate switch box and laying cables etc.,
Supplying and fixing 500 litre capacity HDPE tank including loading transportation and labour charges for fixing of the GI pipe and specials etc.,
Fabrication and fixing of MS Supports using I beams / Channels / Angles and SS Safety grills in Screen well, Collection well and Suction well with allied works at various sewage pumping stations in Area IV
Kannadasan Nagar SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 5Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Thiruvalluvar Nagar SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Kadumbadi SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Thendral Nagar SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Poongavanam Nagar SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site
Muthamil Nagar SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Kamarajar Salai SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
KB4 SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Krishnamurthy Nagar SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complet
Supply and fixing of 2Ton Chain pulley block with 5mtrs of Loading chain and 12Mts lifting chain with trolley
Vyasarpadi Lake Area SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Kasimedu SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
CB Road SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
RK nagar North SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
RK nagar South SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Hiring of Jack hammer including operator, transportation etc., complete
Supply and fixing of 2Ton Chain pulley block with 8mtrs of Loading chain and 18Mts lifting chain with trolley
Tondiarpet D SPS
Fabrication and fixing of suding MS Channel, I beams, L angles by cutting, welding, grinding including grouting, civil works, painting etc., complete
Hiring of Jack hammer including operator, transportation etc., complete
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Erukkencherry SPS
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site
Vyasarpadi SPS
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Melpattadai SPS
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
MKB Nagar SPS
Fabrication and fixing of SS safety grills in the Screen well / Collection well / Suction wells including cutting, grinding, welding, fixing with all safety measures etc., complete as per site condition
Bill No.2-Improvement works to be carried out in Civil/Electrical works in various sewage pumping station in Area V
Providing paver block and levelling and allied works in various sewage pumping stations in Area V
Muthamizh nagar
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Cemetry Road SPS
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Malaiyappan Street
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Tondiarpet C
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Tondiarpet B
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Royapuram SPS
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Link road SPS
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
SVM Nagar
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Navalar Nagar
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Walltax Road SPS
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
stanley sps
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Border thottam
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Sydenhams Road SPS
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Napier Park
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Langs Garden
Dismantling of Existing structure and leveling of site as per site condition
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Bojaraja Nagar
Dismantling of Existing structure and leveling of site as per site condition
Earth work excavation in all kinds of soil as per SS 20B
Supplying and filling crushed stone sand (M-sand) for foundations and basement, including watering, consolidating, ramming, etc., complete."
C.C 1:4:8 using 40mm gauge hand broken stone jelly for P.C.C work
Supplying and filling quarry dust including watering, consolidation ramming etc., for paving paver Block
Providing and laying 60mm thick factory mode cement concrete interlocking paver block of M30 grade block making machine with strong vibratory compaction and of approved size and design shape laid in required coour and pattarn over 50mm thick compacted BEd, including filling the joint with course sand etc., as per direction of Engineer
Plastering with CM 1:3 for 15mm thick including curing etc.,
Providing Cement concrete road and allied works in various SPS in Area V
Royapuram sps
Hiring JCB for clearing and leveling the earth & clearing the jungle
Excavation in hard stiff clay, stiff black cotton, hardred earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS20B with initial lead of 10m and lift of 2.0m
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Langs Garden
Hiring JCB for clearing and leveling the earth & clearing the jungle
Excavation in hard stiff clay, stiff black cotton, hardred earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS20B with initial lead of 10m and lift of 2.0m
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Tondiarpet B
Hiring JCB for clearing and leveling the earth & clearing the jungle
Excavation in hard stiff clay, stiff black cotton, hardred earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS20B with initial lead of 10m and lift of 2.0m
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Tondiarpet C
Hiring JCB for clearing and leveling the earth & clearing the jungle
Excavation in hard stiff clay, stiff black cotton, hardred earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS20B with initial lead of 10m and lift of 2.0m
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Bojaraja Nagar
Hiring JCB for clearing and leveling the earth & clearing the jungle
Excavation in hard stiff clay, stiff black cotton, hardred earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS20B with initial lead of 10m and lift of 2.0m
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Law collage SPS
Hiring JCB for clearing and leveling the earth & clearing the jungle
Excavation in hard stiff clay, stiff black cotton, hardred earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS20B with initial lead of 10m and lift of 2.0m
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Walltax road
Hiring JCB for clearing and leveling the earth & clearing the jungle
Excavation in hard stiff clay, stiff black cotton, hardred earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS20B with initial lead of 10m and lift of 2.0m
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Sydenhams road
Hiring JCB for clearing and leveling the earth & clearing the jungle
Excavation in hard stiff clay, stiff black cotton, hardred earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS20B with initial lead of 10m and lift of 2.0m
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Construction of Rest Room of size 2.0 mts x 1.2 mts for various sewage pumping stations in Area-V.
Muthamizh Nagar
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Royapuram
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Tondiarpet B
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Tondiarpet C
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Cemetry Road SPS
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
SVM Nagar
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Malaiyappan Street
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
stanley sps
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Border thottam
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Navalar Nagar
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Sydenhams Road SPS
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Napier Park
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Link road SPS
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Bojaraja Nagar
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Katpada SPS
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Law Collage
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
South Coovum SPS
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Gandhi Irwin Road SPS
Earth work excavation and depositing on bank with initial lead of 10 metres and initial lift of 2.00 meters in hard stiff clay, stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth, and earth mixed with small-sized boulders as per S.S. 20-B (excluding timbering and bailing out sub-soil water)
Cement Concrete 1:2:4 using 20mm gauge hand broken stone jelly for R.C.C works.
Supplying, fabricating, and laying in position MS rounds or RTS rods for RCC works, including the cost of reinforcement, binding wire, cutting, bending, cranking, and tying in position with binding wire assembly, etc. M.S or R.T.S rods.
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surfaces, including strutting up to 3 meters in height.
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete
Stock brickwork with 2nd class bricks in cement mortar 1:3 (crushed stone sand, M-sand) for a 23 cm thick wall, including curing, etc., complete and extra labour for 11cm thick wall
Plastering with cement mortar 1:3 (crushed stone sand, M-sand) for 15 mm thick, including curing, etc., complete.
Supplying and filling crushed stone sand (M-sand) for foundations and basements, including watering, consolidating, ramming, etc., complete.
Supplying and filling quarry dust including compacting watering etc., complete.
Cement concrete 1:4:8 using crushed stone sand (M-sand) and 40 mm gauge hard broken stone jelly for plain cement concrete works, including laying in layers of not more than 15 cm thick, including ramming, curing, etc., complete.
Concrete with Broken Brick jelly 20mm gauge in pure slacked lime over R.C.C Roof slab in the proportions of 32:12 1/2 well beaten with wooden beat to the required depth of 80mm thick and giving required slope and thickness to roof as required etc.,
Terrace flooring with two course of flat tiles of 15cmsx15cmsx12mm using C.C 1:3 mixed with crude oil 10% by weight of cement and ponted with same oiled mortar
Supplying and fixing 100mm dia A.C. downfall pipe, including cost of 100mm dia A.C. pipe, shoe, bend, brackets, and teakwood plugs, gratings, etc., complete with door arrangements.
Paving the floor with plain/design ceramic tiles of size 200mmx200mmx6mm in all floors over a base layer of cement mortar 1:3 20mm thick laid-in-situ and pointed with same coloured cement for floor
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick in C.M 1:2 10mm thick and pointing with cement using 0.4Kg/m2 including finishing the joint and pointing flush with tile surface etc.,
Supplying PVc pipe and specials including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes etc.,
"Supplying G.I. pipes and specials of the following sizes, including cutting, threading, and jointing with necessary specials, including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding, etc., complete for 20mm dia wheel valve.
Providing and fixing color glazed European water closet with rosewood seatings (Black), low-level flushing tank with fittings, etc., complete
Supplyimg and fixing C.P.Screw down Tap of size 20mm
Providing and fixing 15x10 cm S.W. gully trap with C.I. gratings in B.J. concrete in C.M. 1:4:10 with silt pit diaphragm arrangements, etc., complete.
Supplying and fixing P.V.C door with frame of 0.75x2.1mt including locking arrangements etc.,
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning, preparing the surface and curing etc., complete.
White washing two coats
Supplying, laying, jointing, and testing 100mm dia S.W. pipe, including earthwork excavation for trenches in hard stiff clay, stiff black cotton, hard red earth, shales, murams, gravel, stony earth, and earth mixed with small size boulders and hard gravelly soil, depositing the earth on banks with an initial lead of 10m, lowering the pipes into the trenches, aligning, refilling the trenches with excavated earth in layers of not more than 23cm thick, watering, ramming to consolidation, and disposal of surplus earth, etc., complete at an average depth of 2.0m.
Construction of Inspection chamber of size 60x60x60 with earth work excavation for foundation 23cm thick cement bed using 40mm brick jelly concrete in C.M 1:4:10 for foundation, brick in C.M 1:3 for 12mm thick benching, channelling, supplying and fixing 45cmsx45cms medium weight L.S cover and frame.
Electrical Items.
Wiring with 2.5 sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint Box and switch box with continous earth connection by 14SWG TC wire.
Run of 2 of 2.5sq.mm P.V.C unshealthed copper SC cable in PVC pipe for main continous earth connection by 14SWG TC wire.
Supplying and fixing of water light Bulk head fitting suitable for 100Watts bulbs with lamp guard and lamp.
Supplying and fixing Led tube light ( 18 Watts )
Supplying and fixing of 16amps 1' DP SFU switch with fuse and netural link on suitable teak wood board earthing
Earthing as per ISI specification with necessary masonry work
Miscellaneous Item
R.C.C. jolly work 50mm thick in cement concrete 1:2:4, excluding cost of reinforcement but including molding, curing, etc., complete
Labour charges for cleaning existing SV chamber , dewatering the subsoil water, plastering the wall surface at inside chamber
Labour charges for construction of sump of size 1mtrx2mtrx2mtr for collecting the drinking water and delivery of water to proposed water tank using 1 HP mono block of head 10mts through 20mm dia GI pipe of length 20mtrs
Provision of DG sets and allied works in various SPS in Area V
Muthamizh Nagar SPS-20kVA DG Set
Supply and delivery of 20 KVA DG set
Erection of above 20kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 100mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 1000 x 1000 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 50 sq.mm Ar. Al cable for 20 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 63A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
SVM Nagar SPS-20kVA DG Set
Supply of 20 KVA ,1500RPM Alternator: 20 KVA, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 20kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 100mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 450 x 450 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and providing Body Earthing station by 100mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 1000 x 1000 mm ) with RCC Cover slab etc for body earthing of DGsets.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 50 sq.mm Ar. Al cable for 20 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 63A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Navalar Nagar SPS-20kVA DG Set
Supply of 20 KVA ,1500RPM Alternator: 20 KVA, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 20kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 100mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 1000 x 1000 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 50 sq.mm Ar. Al cable for 20 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 63A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Border thottam SPS- 62.5kVA DG Set
Supply of 1500RPM Alternator: 62.5 KVA, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 62.5kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 100mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 450 x 450 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 95 sq.mm Ar. Al cable for 62.5 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 150A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Malaiyappan Street SPS-62.5kVA DG Set
Supply of 1500RPM Alternator: 62.5 KVA, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 62.5kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 100mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 450 x 450 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 95 sq.mm Ar. Al cable for 62.5 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 150A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Link Road SPS-62.5kVA DG Set
Supply of 1500RPM, Alternator: 62.5 KVA, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 62.5kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 100mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 450 x 450 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 95 sq.mm Ar. Al cable for 62.5 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 150A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Law collage SPS- 100kVA DG Set
Supply of Alternator: 100 KVA, 1500RPM, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 100kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 100mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 1000 x 1000 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 150 sq.mm Ar. Al cable for 100 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 200A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Sydenhams Road SPS- 82.5kVA DG Set
Supply of Alternator: 82.5 KVA, 1500RPM, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 82.5kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 82.5mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 82.50 x 82.50 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 150 sq.mm Ar. Al cable for 82.5 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 150A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Langs Garden SPS- 125kVA DG Set
Supply of Alternator: 125 KVA, 1500RPM, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 125kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 125mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 1250 x 1250 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 180sq.mm Ar. Al cable for 125 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 200A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
North Wall Road SPS- 125kVA DG Set
Supply of Alternator: 125 KVA, 1500RPM, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 125kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 125mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 1250 x 1250 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 180sq.mm Ar. Al cable for 125 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 200A Change over Switch
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Napier park sps - 250 kVA
Supply of Alternator: 250 KVA, 1500RPM, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 250kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 125mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 1250 x 1250 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 400sq.mm Ar. Al cable for 125 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 1000A Air Circuit Breaker
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Royapuram SPS-500 kVA
Supply of Alternator: 500 KVA, 1500RPM, 3Ph, 4Wire,415V, 50Hz,0.8 PF incoporating water cooled diesel engine,and alternator Standard control panel CPCB -II approved acoustic enclosure, batteries& diesel tank for DG set mounted on MS Iron Channel Base plate with neccessary as required
Erection of above 500kVA/415V DG set with necessary civil foundation, unloading from truck by using crane and positioning DG set in foundation, control cabling consumables for testing, commissioning of DG Set, diesel and other needs etc
supply , erection of4" ms exhaust pipe with necessary fixing acessories as required.
supply and providing insulation and clading for above 4" exhaust pipe with necessary fixing acessories as required.
suppiy and providing insulation and clading for silencer with necessory acessories etc.
Supply and providing Body Earthing station by 125mm dia 12mm thick C.I Pipe 2.5 m long with alternate layer of Salt Charcoal as per IS 3043 and construction of brick masonary chamber (inner dimension 1250 x 1250 mm ) with RCC Cover slab etc for body earthing of DGsets.
Supply and laying following sizes of cu Flats for Body, neutral earthing of DG sets with fixing accesseries like copper & Nets for Jointing etc.
25 x 3 mm copper flat
Supply and laying of 1 KV grade PVC insulated 3.5 core 400sq.mm Ar. Al cable for 125 KVA DG sets with necessary fixing accessories etc.
End termination for above cable by using suitable cable glands and crimping sockets with necessory fixing accessories etc.
Supply and fixing of 1000A Air Circuit Breaker
Towards charges for preparation of drawings, submission the drawings at CEIG obtaining drawing approval and arranging inspection with officials finally getting safety certificate etc.
Provision of Submersible Pumpsets and allied works in various SPS in Area V
Muthamizh Nagar SPS-
Supply, delivery erection and commissioning of 10 HP non-clog electrical driven submersible sewage pumpset as per specification 20 LPS Discharge,15mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 32A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 35sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 35sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Cementry Road SPS-
Supply, delivery erection and commissioning of 15 HP non-clog electrical driven submersible sewage pumpset as per specification 20 LPS Discharge,15mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 32A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 35sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 35sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Bojaraja Nagar SPS-
Supply, delivery erection and commissioning of 20 HP non-clog electrical driven submersible sewage pumpset as per specification 33.33 LPS Discharge,18mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 63A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 50sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Katpada SPS
Supply, delivery erection and commissioning of 15 HP non-clog electrical driven submersible sewage pumpset as per specification 20 LPS Discharge,15mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 32A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 35sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 35sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Chettithottam SPS
Supply, delivery erection and commissioning of 15 HP non-clog electrical driven submersible sewage pumpset as per specification 20 LPS Discharge,15mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 32A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 35sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 35sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Malaiyappan street
Supply, delivery erection and commissioning of 40 HP non-clog electrical driven submersible sewage pumpset as per specification 75 LPS Discharge,22mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 100A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 70 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 70sq.mm cable with necessary earth connection
Supply and fixing of 10KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 70sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 70sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Stanley SPS
Supply, delivery erection and commissioning of 20 HP non-clog electrical driven submersible sewage pumpset as per specification 33.33 LPS Discharge,18mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 63A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 50sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
SVM Nagar SPS
Supply, delivery erection and commissioning of 10 HP non-clog electrical driven submersible sewage pumpset as per specification 20 LPS Discharge,15mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 32A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 35sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 35sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Supply, delivery erection and commissioning of 15 HP non-clog electrical driven submersible sewage pumpset as per specification 20 LPS Discharge,15mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 32A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 35sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 35sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Navalar Nagar SPS
Supply, delivery erection and commissioning of 15 HP non-clog electrical driven submersible sewage pumpset as per specification 20 LPS Discharge,15mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 32A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 5KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 35sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 35sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
border thottam SPS
Supply, delivery erection and commissioning of 25 HP non-clog electrical driven submersible sewage pumpset as per specification 50 LPS Discharge,18mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 63A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 50 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply and fixing of 10KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 50sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 50sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Langs Garden SPS
Supply, delivery erection and commissioning of 90 HP non-clog electrical driven submersible sewage pumpset as per specification 175 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 150 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 150sq.mm PVC LTUG cable by MS clamps on wall .
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
pipes and specials as per site condition
Sydenhams road SPS
Supply, delivery erection and commissioning of 60 HP non-clog electrical driven submersible sewage pumpset as per specification 120 LPS Discharge,22mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 100A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 120 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 120sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 1 nos and 10kVar 1no with necessary earth connection only
Supplying and clamping of 3 ½ core 120sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 120sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
North Wall Road SPS
Supply, delivery erection and commissioning of 90 HP non-clog electrical driven submersible sewage pumpset as per specification 175 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 150 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 150sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Law collage sps
Supply, delivery erection and commissioning of 70 HP non-clog electrical driven submersible sewage pumpset as per specification 125 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 100A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 120 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 120sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 1 nos and 1 no 10kvar with necessary earth connection only
Supplying and clamping of 3 ½ core 120sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 120sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Tondiarpet B sps
Supply, delivery erection and commissioning of 120 HP non-clog electrical driven submersible sewage pumpset as per specification 233 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 150 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 150sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Royapuram sps
Supply, delivery erection and commissioning of 120 HP non-clog electrical driven submersible sewage pumpset as per specification 233 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 150 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 2 nos and 1 no 10 kvar with necessary earth connection only
Supplying and clamping of 3 ½ core 150sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
pipes and specials as per site condition
Napier Park
Supply, delivery erection and commissioning of 80 HP non-clog electrical driven submersible sewage pumpset as per specification 150 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 150 sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 2 nos and 1 no 10 kvar with necessary earth connection only
Supplying and clamping of 3 ½ core 150sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
pipes and specials as per site condition
Supply, delivery erection and commissioning of 120 HP non-clog electrical driven submersible sewage pumpset as per specification 233 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 150 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 2 nos and 1 no 10 kvar with necessary earth connection only
Supplying and clamping of 3 ½ core 150sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Dewatering Motor
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards for various sewage pumping stations in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Royapuram sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Tondiarpet B sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Law college sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards wall tax road sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Langs garden sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards North wall road sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standardsTondiarpet c sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Sydenhams road sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Bojaraja Nagar sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Kathpada sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Stanley sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Chetty thottam sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Muthamizh nagar sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards athiyavanimuthu nagar sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Border thottam sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Navalar nagar sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards East cementry road sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Malayappan street sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Link road sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards South coovum road sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Gandhi irwin road sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Napier Park sewage pumping station in Area-V
Supply ,delivery, installation and commissioning of odour control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for installation, commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessories, media filling port, Pre filter, Regeneration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly-Ethylene or MS with epoxy lining. Power supply three phase. Noise level should be as per IS. Equipment should be capable to remove odour from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.odour control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge and have capacity meet indian air quality standards Reserve bank sewagepumping station in Area-V
PROVIDING ADDITIONAL WELL AND ALLIED WORKS AT NORTHWALL ROAD SPS IN AREA V
Construction of Screen cum Suction well and allied works
Providing Iron Barricadi+C1213:G1231ng of size 2.50 m width and 1.75 m height using 40x40x4 mm angle for outer frame supports, 25 x 25 x 3 mm angle for inner frame supports and 20 gauge thickness MS sheet for name board (as per drawing) including cutting, welding, fabrication charges and one coat of primer and 2 coats of enamel paint of approved quality, writing "METRO WATER" & work detail/ caution sign, providing necessary interlocking arrangements with adjoining units, fixing danger flags, danger lights, reflectors, fixing stickers etc, including watching during night and placing the barricading units as directed at the sites.
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining.
From 1 m above ground level to 3.0 m below ground level
10 m to 11 m above invert of well
10 m to 11 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (M sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.5 m above ground level to 1.5 m below ground level
From 1.5m to 4.5m below ground level
From 9.0m to 13.5m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
9m to 13.5m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.20 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water.
First depth of 2m
Second depth of 2m
Third depth of 2m
Fourth depth of 2m
Fifth depth of 2m
Sixth depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
9m to 13.5m depth
Supplying, fabricating CRS bars manufactured by Primary steel including cost of steel, binding wire, cutting, cranking and tying, in position with binding wire assembly etc complete.
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supply and erection of Cast Iron single faced manually operated non rising type 450mm dia penstock with extension rod of 5.5m length conforming to relevant IS with IS markings on it, having cast iron door and frame with Gunmetal seating, spindle made of Stainless steel, CI head stock with gear arrangment and hand wheel fitted in well.
Supplying and fixing SS screen of grade 316. The screen shall be fabricated out of stainless steel flats of 50 x 10mm. The outer frame also shall be of 50 x 10mm fixed inside the well for seating the screen. The screen shall be so fabricated that the inclined portion of the screen is fixed and the horizontal portion of the screen is a removable one for lifting the pump for maintenance purpose. Outer frame and 50x10mm SS flats spaced at 35mm centre to centre to serve bar screens inside the screen well
Supplying and fixing C.I.steps.
Supplying and fixing FRC cover and frame of size 60x60cm including necessary masonry work and plastering etc complete.
Precast slab 200mm thk in Cement Concrete using M30(SRC) for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing,as per drawings,or as directed etc., complete.
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Road cut
Cutting Asphaltic Road
Supplying and fixing 150mm dia MS Ventilating columns 6.0m length with CI Base for Ventilating column, Wire Cowl, Supplying, Laying, Jointing and Testing of 160mm dia UPVC pipe to a length of 6m for each column including cost of joining materials such as cement, sand and spun yarn with necessary civil works for construction of Masonry Pillars, earthwork excavation, refilling etc., complete.
Construction of valve chamber and allied works
Earth work excavation in all kinds of soils except hard rock requiring blasting inclusing of shoring strutting and bailing out water whereever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing surplus earth within in compound in places as shown by the departmental officers clearing and levelling the site with initial lead of 10mts. and lift of 2m etc. complete.
Upto 2 m below GL
From 2 m to 3 m below GL
Supplying and filling Crushed stone sand (M-sand) for foundations and basement including watering consolidating ramming, etc., complete
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
From 1.5 m to 4.5 m below GL
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications.
Upto 3 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M25 grade (M-sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
Upto 1.5 m below GL
From 1.5 m to 4.5 m below GL
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing, etc complete
From 1.5 m to 4.5 m below GL
Precast slab in Cement Concrete 1:2:4 using 12-20mm BG jelly for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing, etc., complete. (100 mm thk)
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand) & SRC for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand) & SRC for 12mm thick including curing, etc., complete
Refilling with excavated soil (other than sand) compling with standard specification for filling in foundation and basement etc. complete
Disposal of surplus earth
Supplying and fixing C.I.steps.
Providing Iron Barricading of size 2.50 m width and 1.75 m height using 40x40x4 mm angle for outer frame supports, 25 x 25 x 3 mm angle for inner frame supports and 20 gauge thickness MS sheet for name board (as per drawing) including cutting, welding, fabrication charges and one coat of primer and 2 coats of enamel paint of approved quality, writing "METRO WATER" & work detail/ caution sign, providing necessary interlocking arrangements with adjoining units, fixing danger flags, danger lights, reflectors, fixing stickers etc, including watching during night and placing the barricading units as directed at the sites.
INTERCONNECTION BETWEEN MACHINE HOLE AND SUCTION WELL
Supply, laying, jointing and testing of C.I. Pipe of 750 mm dia including testing of C.I pipesearth work excavation in hard stiff clay, stiff black cottonhard red earth and earth mixed with small size boulders and hard gravelly soildepositing the earth on banks with initial lead of 10 m lowering into the trenches and aligningrefilling with excavated soil, watering and ramming to consolidation etc.complete at an average depth of 4.5m
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications
pipes and specials as per site condition
350 mm dia CI d/f duckfoot bend
400 x 350 mm CI D/F taper
400 mm dia CI - 3.0m d/f pipe
400 mm dia CI - 2.0m d/f pipe
400 mm dia CI - 1.5m d/f pipe
400 mm dia CI - 1.0m d/f pipe
400 mm dia CI - 0.5m d/f pipe
400 mm dia CI d/f 90 deg bend
400 mm dia CI - 2.0m d/f pipe
400 mm dia CI - 0.5m d/f pipe
450 mm dia CI sluice valve
400 mm dia CI - 0.5m d/f pipe
450 mm dia CI non-return valve
500 mm dia CI - 0.5m d/f pipe
450 mm dia CI sluice valve
500 mm dia CI fl/spi TP
500 mm dia Blank flange
DOUBLE AIR VALVE AS PER ISI 14845/200- 100 mm
Conveying and fixing double air valves (4” to 3”) 100mm to 80mm
Jointing the C.I.Double flanged pipes and specials with rubber insertion to the required specifications with M.S. bolts and nuts, complete and testing the pipies to the required pressure with water (including cost of jointing materials) For depth upto 2m,
500mm dia
400mm dia
350mm dia
ELECTRICAL ITEMS
Supply, delivery erection and commissioning of 90 HP non-clog electrical driven submersible sewage pumpset as per specification 175 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 150 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 150sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Supply, delivery erection and commissioning of 100 HP non-clog electrical driven submersible sewage pumpset as per specification 192 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and clamping of 3 ½ core 150 sq.mmPVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply and fixing of 20KVAR capacitor 2 nos with necessary earth connection only
Supplying and clamping of 3 ½ core 150sq.mm PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and lamination of 3 ½ core 150sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supply, fixing and erection of suitable floor mounted panel board to accommodate the switch gears with 300A,150 A,63 A,32A & 100 A busbar,SS, volt meter, Ammeter, LDB, change over switch, SMC, CT and making internal terminations etc complete()
PANEL ROOM-
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m etc. complete.
Upto 2.0 m below GL
2.0 to 3.0 m below GL
Supplying and filling sand for foundation and basement including watering, consolidating, ramming etc. complete.
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly including laying in layers of not more than 15cm thick including ramming curing etc complete
Upto 1.5 m below GL
1.5 m to 4.5 m below GL
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high.
Upto 3.0 m height above and below GL
Above 3.0 m upto 4.0m height above GL
Above 4.0 m upto 5.0m height above GL
Above 5.0 m upto 6.0m height above GL
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded
Upto 1.5 m below GL
1.5 m to 4.5 m below GL
Upto Plinth above GL
Upto 4.5 m above Plinth
4.5 m to 9.0 m above Plinth
Sun shade laying C.C. 1:2:4 for RCC sunshade work using 20mm hard broken stone jelly 80mm thick at wall end and 50mm thick at free end projecting 600mm from wall face moulded along with RC lintels and tailed into the full thickness of wall where there are
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RC
Stock brick work in cement mortor 1:4 using second class bricks including curring etc. complete for 23 cm thick wall
From 1.5 m below GL & upto plinth level above GL
For Groud floor upto 4.5 m from Plinth
For 11 cm thick wall
Upto 4.5 m above First Floor level
Plastering with C.M 1:3 for 20mm thick including curing etc. complete
Plastering with C.M 1:3 for 12mm thick including curing etc. complete
Special celling plastering 10mm thick with C.M. 1:3 for RCC slabs and beams, columns, roof slabs and sun shade
Flooring 100mm thick base concrete in C.M. 1:4:10 using 40mm B.G. jelly etc. complete
Granolithic flooring 25 mm thick with cement concrete 1:2:4 using 3-10 mm chips and top surface rendered smooth with cement including thread lining and 25 mm dia G.I. pipe of necessary length for water outlet curing, etc. complete
Weathering course: Concrete with broken brick jelly 20mm guage in pure slacked lime over RCC roof slab in proportion of 32:12 (no sand to be used) well beaten with wooden beaters to be required depth of 80mm thick and giving rerquired slope and thickness to roof as required etc. complete.
Terrace flooring with two course of pressed tiles 15x15x12 cm using cement mortor 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortor
Supplying and erecting rolling shutters 76mm, 18 guage of galvanized steel sheet with push and pull type or self coiling type operated by pulling hook with top cover including locking arrangements and fixed in position inside or outside etc. complete and painting with priming coat of red oxide without lock (Payment will be made only for actual opening of shutters)
UPVC OPENABLE TYPE WINDOW SIZE 1.2M X 1.3MManufacturing, supplying and fixing in position Anodised Alu. Natural colour mat finish with openable type window with extruded Alu. Sections with two panels of size (Frame - 38 x 33 x21 x 2.4mm @ 0.615 Kg/m, Shutter: Bottom, Top - 38.5 x 33 x 24.5 x 3 & 4mm @ 0.706 Kg/m, Interlocking vertical - 59 x 33 x 25 x 2.5mm @ 1.135 Kg/m) with necessary accessaries such as rubber beadings best quality of lock handle hinges, stays and fixing 4 mm thick plain /frosted /pin headed glass including cost of all materials labour for electrical consumption required for drilling holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the Board officers.The Al.Surfaces is to be anodised with matt finish usder electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns. (All materials should be got approved by the Site Engineer before fixing in position)
ALUMINIUM DOOR SINGLE LEAF SIZE 2.1M X 1.0MSupplying, fabricating and fixing in position of Alumi. Anod. natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box s
Supplying and fixing M.S. grills for window and gate including one coat of primer with red lead etc. complete as directed.
Painting with two coats of ready mixed exterior emulsion paint of good quality and of approved colour over priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc,wherever required.For Exterior walls
Painting with two coats of ready mixed exterior emulsion paint of good quality and of approved colour over priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc,wherever required.For Interior walls
White washing three coats (Ceiling)
Painting two coats with superior quality ready mixed paints of chocholate colour, light green, grey colour or any other approved colour over painting with primary coat (red lead) on new iron work: Rolling Shutter
Supplying and fixing of stainless strel ladder consisting of side support and foot rest made up of 18 SWG, 304 Grade stainless steel with stainless steel weded joints. The width of the ladder is 45cms
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations & basement
Disposal of surplus earth
Precast slab in cement concrete 1:2:4 using 1-20mm mm BG jelly for reinforced cement concrete works including cost of steel. Centering, shuttering and cost of steel reinforcement and including layiung inposition,compacting, curing,finishing,etc. complete (100 mm thick)
PLUMBING WORK
Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed at site etc.,
Supply and delivery of domestic pumpset (centrifugal monobloc pumpset of capacity 100lpm and 20m head with ISI mark as per IS 9079/1989-1HP) including necessary electrical works etc., complete.
Supplying and fixing 25 mm GI pipe
Supplying and fixing 25 mm GI Gate Valve
Supplying and fixing 20 mm C.P screq down tap
Providing and fixing 160 mm dia PVC Rainwater downfall pipe from roof to the RWH chamber for collecting the water (2 m horizontal distance from RWH pit)
Providing and fixing 75mm dia Nahani trap (floor trap) with brass gratings
Providing 75 mm dia PVC pipe from Nahani floor trap to the RWH chamber for collecting the rain water and tap water.
COMPOUND WALL
Clearing heavy jungle
Earthwork excavation and depositing on bank with initial lead of 10 metres and initial lift 2.00m in hard stiff clay stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth and earth mixed with small size boulders S.S. 20-B.(excluding timbering and bailing out sub-soil water)
Supplying and filling M-sand for foundation and basement including watering consolidating ramming etc., complete
C.C 1:3:6 using 40mm guage hard broken stone jelly for PCC works including laying in layers of not more than 15cm thick ramming, curing etc complete
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the Board officers complete.
1.5m below GL
Upto 1.5m Above GL
1.5m - 4.5m above GL
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works as follows
Stock brick work with II class bricks in cement mortar 1:5 (Crushed stone sand (M-sand)) for 23 cm thick wall including curing etc. complete
Upto 1.5m above GL
Upto 1.5m -4m above GL
Band course work flat 10mm to 12mm thick and 50mm deep with C.M. 1:3 including curing, etc., complete as directed
20mm thick sand faced cement plaster on wall upto height 10meters above ground level consisting of 12mm thick backing coat of M 1:3 ( 1 cement : 3 Sand ) and 8mm thick finishing of coat CM 1:1 ( 1 cement : 1 Sand ) etc complete
Colour washing two coats over one coat of white washing
Supplying and fixing barbed wire fencing over the proposed compound wall with ‘L’ angle iron 50 x 50 x 6mm & 1.45m posts bent to shape at 2.5m centres with 6 rows of barbed wire and also in a zig zag manner at 25cm c.c. connecting all the rows with barbed wire will be of 2 ply and 12 gauge or other approved size including drilling hole in ‘L’ iron posts and fixing the posts in cement concrete 1:2:4 of size 15x15x45cm etc as directed.
Refilling with excavated sand complying with the standard specifications for filling in foundations and basement
Disposal of surplus earth
supplying and fabricating and erection of iron gate with of required size as per direction at site with G.I pipesof 50mm and specials at all sides and 40 X 40X 6 mm angles as bracing on which 2 Nos of ms sheet of 16 guage of size 2x 2m each welded as two halves fixing letter " METRO WATER" including one coat of primer with red lead etc. complete as directed
Painting with two coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessaary plaster of paris, putty, etc., wherever required
providing and fixing garderning items on site as directed
spider lily
providing and fixing planting plants and shurbs on compound wall as directed
PROVIDING ADDITIONAL WELL AND ALLIED WORKS AT BORDER THOTTAM SPS IN AREA V
Construction of Screen cum Suction well and allied works
Providing Iron Barricadi+C1213:G1231ng of size 2.50 m width and 1.75 m height using 40x40x4 mm angle for outer frame supports, 25 x 25 x 3 mm angle for inner frame supports and 20 gauge thickness MS sheet for name board (as per drawing) including cutting, welding, fabrication charges and one coat of primer and 2 coats of enamel paint of approved quality, writing "METRO WATER" & work detail/ caution sign, providing necessary interlocking arrangements with adjoining units, fixing danger flags, danger lights, reflectors, fixing stickers etc, including watching during night and placing the barricading units as directed at the sites.
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining.
From 1 m above ground level to 3.0 m below ground level
10 m to 11 m above invert of well
10 m to 11 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (M sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.5 m above ground level to 1.5 m below ground level
From 1.5m to 4.5m below ground level
From 9.0m to 13.5m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
9m to 13.5m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.20 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water.
6m dia well
First depth of 2m
Second depth of 2m
Third depth of 2m
Fourth depth of 2m
Fifth depth of 2m
Sixth depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
9m to 13.5m depth
Supplying, fabricating CRS bars manufactured by Primary steel including cost of steel, binding wire, cutting, cranking and tying, in position with binding wire assembly etc complete.
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supply and erection of Cast Iron single faced manually operated non rising type 450mm dia penstock with extension rod of 5.5m length conforming to relevant IS with IS markings on it, having cast iron door and frame with Gunmetal seating, spindle made of Stainless steel, CI head stock with gear arrangment and hand wheel fitted in well.
Supplying and fixing SS screen of grade 316. The screen shall be fabricated out of stainless steel flats of 50 x 10mm. The outer frame also shall be of 50 x 10mm fixed inside the well for seating the screen. The screen shall be so fabricated that the inclined portion of the screen is fixed and the horizontal portion of the screen is a removable one for lifting the pump for maintenance purpose. Outer frame and 50x10mm SS flats spaced at 35mm centre to centre to serve bar screens inside the screen well
Supplying and fixing C.I.steps.
Supplying and fixing FRC cover and frame of size 60x60cm including necessary masonry work and plastering etc complete.
Precast slab 200mm thk in Cement Concrete using M30(SRC) for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing,as per drawings,or as directed etc., complete.
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Road cut
Cutting Asphaltic Road
Supplying and fixing 150mm dia MS Ventilating columns 6.0m length with CI Base for Ventilating column, Wire Cowl, Supplying, Laying, Jointing and Testing of 160mm dia UPVC pipe to a length of 6m for each column including cost of joining materials such as cement, sand and spun yarn with necessary civil works for construction of Masonry Pillars, earthwork excavation, refilling etc., complete.
VALVE CHAMBER
Earth work excavation in all kinds of soils except hard rock requiring blasting inclusing of shoring strutting and bailing out water whereever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing surplus earth within in compound in places as shown by the departmental officers clearing and levelling the site with initial lead of 10mts. and lift of 2m etc. complete.
Upto 2 m below GL
From 2 m to 3 m below GL
Supplying and filling Crushed stone sand (M-sand) for foundations and basement including watering consolidating ramming, etc., complete
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
From 1.5 m to 4.5 m below GL
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications.
Upto 3 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M25 grade (M-sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
Upto 1.5 m below GL
From 1.5 m to 4.5 m below GL
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly for plain concrete works including laying ramming curing, etc complete
From 1.5 m to 4.5 m below GL
Precast slab in Cement Concrete 1:2:4 using 12-20mm BG jelly for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing, etc., complete. (100 mm thk)
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand) & SRC for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand) & SRC for 12mm thick including curing, etc., complete
Refilling with excavated soil (other than sand) compling with standard specification for filling in foundation and basement etc. complete
Disposal of surplus earth
Supplying and fixing C.I.steps.
Providing Iron Barricading of size 2.50 m width and 1.75 m height using 40x40x4 mm angle for outer frame supports, 25 x 25 x 3 mm angle for inner frame supports and 20 gauge thickness MS sheet for name board (as per drawing) including cutting, welding, fabrication charges and one coat of primer and 2 coats of enamel paint of approved quality, writing "METRO WATER" & work detail/ caution sign, providing necessary interlocking arrangements with adjoining units, fixing danger flags, danger lights, reflectors, fixing stickers etc, including watching during night and placing the barricading units as directed at the sites.
Road cut
Cutting Asphaltic Road
Non Bus route
INTERCONNECTION
Supply, laying, jointing and testing of C.I. Pipe of 450 mm dia including testing of C.I pipesearth work excavation in hard stiff clay, stiff black cottonhard red earth and earth mixed with small size boulders and hard gravelly soildepositing the earth on banks with initial lead of 10 m lowering into the trenches and aligningrefilling with excavated soil, watering and ramming to consolidation etc.complete at an average depth of 4.5m
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Providing formwork with centering for soffits of reinforced cement concrete slabs or plain surface including strutting upto 3.0m high etc complete complying with standard specifications
Dewatering using 10HP to 70HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.
Hire charges for Diesel Pump set for 20 HP
PIPES AND SPECIALS
Delivery Pipe & related Specials within Well
150 mm dia CI D/F Duckfoot Bend
200 x 150 mm CI D/F taper
200 mm dia CI - 3m D/F pipe
200 mm dia CI - 1.5m D/F pipe
200 mm dia CI - 1m D/F pipe
200 mm dia CI - 0.5m D/F pipe
200 mm dia CI D/F 90 deg Bend
Delivery Pipe & related Specials within Valve Chamber
200 mm dia CI - 1m D/F pipe
200 mm dia CI Non-Return Valve
200 mm dia CI - 0.5m D/F pipe
200 mm dia CI Sluice Valve
200 mm dia CI - 0.5m D/F pipe
Common Header Pipe & related Specials within Valve Chamber
300 x 200mm CI A/F Radial Tee
300 mm dia CI - 0.5m D/F pipe
300 mm dia CI Sluice Valve
300 mm dia CI Fl/Spi Tail Piece
300 mm dia Blank Flange
Jointing the C.I.Double flanged pipes and specials with rubber insertion to the required specifications with M.S. bolts and nuts, complete and testing the pipies to the required pressure with water (including cost of jointing materials) For depth upto 2m,
electrical items
Supply, delivery erection and commissioning of 40 HP non-clog electrical driven submersible sewage pumpset as per specification 175 LPS Discharge,25mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete.
Supply, delivery erection and commissioning of 30 HP non-clog electrical driven submersible sewage pumpset as per specification 60 LPS Discharge,22mtr- head, RPM 1450, CF8M Impeller, guide pipe, lifting chain, pedestal coupling, control panel (ATS) including 'L' angle provision for fixing control panel and 35m submersible weather proof cable and necessary civil works etc complete
Supplying and fixing of 300A triple FSU with HRC fuse with earth connection only.
Supplying and fixing of 200A triple FSU with HRC fuse with earth connection only.
Supplying and fixing of 100A triple FSU with HRC fuse with earth connection only.
Supplying and fixing of 63A triple FSU with HRC fuse with earth connection only.
Supplying and laying of 3.5-core 120 sq. mm LTUG cable in a trench to be excavated at a depth of 2½ feet, putting a 6” layer of sand, covering the cable with brick and sand, and refilling the earth to make good
Supplying and fixing of cable gland and lamination of 3 ½ core 120 sq.mm cable with necessary earth connection
Supplying and laying of 3.5-core 95 sq. mm LTUG cable in a trench to be excavated at a depth of 2½ feet, putting a 6” layer of sand, covering the cable with brick and sand, and refilling the earth to make good.
Supplying and fixing of cable gland and lamination of 3 ½ core 95 sq.mm cable with necessary earth connection
Supply and fixing of 15KVAR capacitor 3 nos with necessary earth connection only
Supply and fixing of 5KVAR capacitor 3nos with necessary earth connection only
Supplying and laying of 3.5-core 50 sq. mm LTUG cable in a trench to be excavated at a depth of 2½ feet, putting a 6” layer of sand, covering the cable with brick and sand, and refilling the earth to make good
Supplying and fixing of cable gland and lamination of 3 ½ core 50 sq.mm cable with necessary earth connection
Supply, fixing and erection of suitable floor mounted panel board to accommodate the switch gears with 300A,150 A,63 A,32A & 100 A busbar,SS, volt meter, Ammeter, LDB, change over switch, SMC, CT and making internal terminations etc complete
Supply, fixing and erection of suitable junction box with terminaln blocks mounted on suitable angle iron frame of IP 65
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
PANEL ROOM-
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m etc. complete.
Upto 2.0 m below GL
2.0 to 3.0 m below GL
Supplying and filling sand for foundation and basement including watering, consolidating, ramming etc. complete.
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly including laying in layers of not more than 15cm thick including ramming curing etc complete
Upto 1.5 m below GL
1.5 m to 4.5 m below GL
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high.
Upto 3.0 m height above and below GL
Above 3.0 m upto 4.0m height above GL
Above 4.0 m upto 5.0m height above GL
Above 5.0 m upto 6.0m height above GL
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded
Upto 1.5 m below GL
1.5 m to 4.5 m below GL
Upto Plinth above GL
Upto 4.5 m above Plinth
4.5 m to 9.0 m above Plinth
Sun shade laying C.C. 1:2:4 for RCC sunshade work using 20mm hard broken stone jelly 80mm thick at wall end and 50mm thick at free end projecting 600mm from wall face moulded along with RC lintels and tailed into the full thickness of wall where there are
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RC
Stock brick work in cement mortor 1:4 using second class bricks including curring etc. complete for 23 cm thick wall
From 1.5 m below GL & upto plinth level above GL
For Groud floor upto 4.5 m from Plinth
For 11 cm thick wall
Upto 4.5 m above First Floor level
Plastering with C.M 1:3 for 20mm thick including curing etc. complete
Plastering with C.M 1:3 for 12mm thick including curing etc. complete
Special celling plastering 10mm thick with C.M. 1:3 for RCC slabs and beams, columns, roof slabs and sun shade
Flooring 100mm thick base concrete in C.M. 1:4:10 using 40mm B.G. jelly etc. complete
Granolithic flooring 25 mm thick with cement concrete 1:2:4 using 3-10 mm chips and top surface rendered smooth with cement including thread lining and 25 mm dia G.I. pipe of necessary length for water outlet curing, etc. complete
Weathering course: Concrete with broken brick jelly 20mm guage in pure slacked lime over RCC roof slab in proportion of 32:12 (no sand to be used) well beaten with wooden beaters to be required depth of 80mm thick and giving rerquired slope and thickness to roof as required etc. complete.
Terrace flooring with two course of pressed tiles 15x15x12 cm using cement mortor 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortor
Supplying and erecting rolling shutters 76mm, 18 guage of galvanized steel sheet with push and pull type or self coiling type operated by pulling hook with top cover including locking arrangements and fixed in position inside or outside etc. complete and painting with priming coat of red oxide without lock (Payment will be made only for actual opening of shutters)
UPVC OPENABLE TYPE WINDOW SIZE 1.2M X 1.3MManufacturing, supplying and fixing in position Anodised Alu. Natural colour mat finish with openable type window with extruded Alu. Sections with two panels of size (Frame - 38 x 33 x21 x 2.4mm @ 0.615 Kg/m, Shutter: Bottom, Top - 38.5 x 33 x 24.5 x 3 & 4mm @ 0.706 Kg/m, Interlocking vertical - 59 x 33 x 25 x 2.5mm @ 1.135 Kg/m) with necessary accessaries such as rubber beadings best quality of lock handle hinges, stays and fixing 4 mm thick plain /frosted /pin headed glass including cost of all materials labour for electrical consumption required for drilling holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the Board officers.The Al.Surfaces is to be anodised with matt finish usder electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns. (All materials should be got approved by the Site Engineer before fixing in position)
ALUMINIUM DOOR SINGLE LEAF SIZE 2.1M X 1.0MSupplying, fabricating and fixing in position of Alumi. Anod. natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box s
Supplying and fixing M.S. grills for window and gate including one coat of primer with red lead etc. complete as directed.
Painting with two coats of ready mixed exterior emulsion paint of good quality and of approved colour over priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc,wherever required.For Exterior walls
Painting with two coats of ready mixed exterior emulsion paint of good quality and of approved colour over priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessary plaster of paris, putty, etc,wherever required.For Interior walls
White washing three coats (Ceiling)
Painting two coats with superior quality ready mixed paints of chocholate colour, light green, grey colour or any other approved colour over painting with primary coat (red lead) on new iron work: Rolling Shutter
Supplying and fixing of stainless strel ladder consisting of side support and foot rest made up of 18 SWG, 304 Grade stainless steel with stainless steel weded joints. The width of the ladder is 45cms
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations & basement
Disposal of surplus earth
Precast slab in cement concrete 1:2:4 using 1-20mm mm BG jelly for reinforced cement concrete works including cost of steel. Centering, shuttering and cost of steel reinforcement and including layiung inposition,compacting, curing,finishing,etc. complete (100 mm thick)
PLUMBING WORK
Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed at site etc.,
Supply and delivery of domestic pumpset (centrifugal monobloc pumpset of capacity 100lpm and 20m head with ISI mark as per IS 9079/1989-1HP) including necessary electrical works etc., complete.
Supplying and fixing 25 mm GI pipe
Supplying and fixing 25 mm GI Gate Valve
Supplying and fixing 20 mm C.P screq down tap
Providing and fixing 160 mm dia PVC Rainwater downfall pipe from roof to the RWH chamber for collecting the water (2 m horizontal distance from RWH pit)
Providing and fixing 75mm dia Nahani trap (floor trap) with brass gratings
Providing 75 mm dia PVC pipe from Nahani floor trap to the RWH chamber for collecting the rain water and tap water.
Compound wall
Clearing heavy jungle
Earthwork excavation and depositing on bank with initial lead of 10 metres and initial lift 2.00m (in all type of strata) in hard stiff clay stiff black cotton, hard red earth, shales, Muram, gravel, stoney earth and earth mixed with small size boulders S.S. 20-B. (excluding timbering and bailing out sub-soil water)
Upto 2.0 m below GL
Supplying and filling M-sand for foundation and basement including watering, consolidating, ramming etc. complete.
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Upto 1.5 m below GL
From 1.5 m to 4.5 m below GL
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
Upto 3 m above and below GL
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using Crushed stone sand (M-sand) and 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, fixing, fan clamps etc., as per standard specification and as directed by the Board officers complete.
Upto 1.5 m below GL
Upto 1.5 m above GL
From 1.5 m to 4.5 m above GL
Supplying and fabricating CRS/Thermo Mechanically Treated High Corrosion Resistance bars manufactured by Primary steel producers/Integrated Steel Plants as per IS:1786-2008,including fixing with binding wires, assembling and laying in position for all RCC works as follows
Stock brick work with II class bricks in cement mortor 1:5 (Crushed stone sand (M-sand)) for 23 cm thick walls including curing etc. complete.
Upto 1.5 m above GL
From 1.5 m to 4.5 m above GL
Band course work flat 10mm to 12mm thick and 50mm deep with C.M. 1:3 (Crushed stone sand (M-sand) including curing, etc., complete as directed
Cement concrete 1:3:6 using Crushed stone sand (M-sand) and 12-20mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
From 1.5 m to 4.5 m above GL
20mm thick sand faced cement plaster on wall upto hight 10 meters above ground level consisting of 12mm thick backing coat of CM 1:3 ( 1 cement : 3 sand ) and 8mm thick finishing coat of CM 1:1 ( 1 cement : 1 sand ) etc complete
Colour washing two coats over one coat of white washing
Supplying and fixing 0.43 cu.m. of broken glass pieces on the coping of the compound wall with C.M. 1:3, 20mm thick including curing, etc., complete as directed
Supplying and fixing barbed wire fencing over the proposed compound wall with ‘L’ angle iron 50 x 50 x 6mm & 1.45m posts bent to shape at 2.5m centres with 6 rows of barbed wire and also in a zig zag manner at 25cm c.c. connecting all the rows with barbed wire will be of 2 ply and 12 gauge or other approved size including drilling hole in ‘L’ iron posts and fixing the posts in cement concrete 1:2:4 of size 15x15x45cm etc as directed.
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations and basement
Disposal of surplus earth
Supplying and fabricating and erection of iron gate with of required size as per direction at site with G.I pipes of 50 mm and specials at all sides and 40x40x6mm angles as bracing on which 2 No.of m.s sheet of 16 gauge of size 2x2m each is welded as two halves fixing letter ''METROWATER' including one coat of primer with red lead etc.compete as directed.
Painting with two coats of ready mixed plastic emulsion paint first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, etc., complete and including necessaary plaster of paris, putty, etc., wherever required.
Providing and fixing gardening items on site as directed.
Spider Lilly
Providing and fixing planting plants and shrubs on compound wall as directed
White wash and colour washing and allied works at Various SPS in Area V
Napier Park SPS
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Tondiarpet B SPS
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Royapuram SPS
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Muthamizh nagar
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Tondiarpet c SPS
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
stanley sps
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
SVM Nagar SPS
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Navalar Nagar
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
cemetry road
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
bojaraja nagar
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
sydenhams
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
link road
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
border thotam
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
katpada
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
malaiyappan st
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
law collage
Compound wall
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Office & Panel room
Thorough scrapping of old plastered surface
Painting one coat (Priming Coat) with approved cement paint over cement plastered wall surface
Painting two coat with approved cement paint over cement plastered wall surface, ceiling and other new surface etc.,
Providing and fixing Double scaffloding system (cublock type) as the exterior side of building upto 25mtr height above ground level including additional row of scaffolding in stepped manner as per requirement of site made with 40mm dia MS tube, placed 1.5 mtr C/c horizontal and vertical tube joint with cup and lock system with MS tubes, MS clamps and staircase system in the scaffolding for working platform etc.,
Supply, delivery, erection, testing and commissioning of 11kV, 25kA, 630A HT Indoor three panel Vacum circuit Breaker and allied works in Law collage sewage pumping station in Area V
Supply, delivery of 11kV, 25kA, 630A HT Indoor three panel Vacum circuit Breaker
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supply, delivery and laying of 300 sq mm 11kV XLPE cable- unearthed
240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
Supply and installation of combined model surge protection device to aarest surges and over voltages
Supply and delivery of earth fault device in build on panel
Supply and delivery of thermal control relay in build on panel
Erection and commissioning of VCB unit and terminal connections etc as directed at site
Hiring of 20 tonne crane for handling panel unit and transporting
Charges for testing dielectric strength to withstand breaking capacity 11kV/26.3kA
Supply and delivery of 11kV Vacuum circuit breaker and allied works at Napierpark sewage pumping station
Supply, delivery of 11kV, 25kA, 630A HT outdoor three panel Vacum circuit Breaker
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Hiring of 20 tonne crane for handling panel unit and transporting
Charges for testing dielectric strength to withstand breaking capacity 11kV/26.3kA
Supply, delivery and laying of 300 sq mm 11kV XLPE cable- unearthed
240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
Supply and installation of combined model surge protection device to aarest surges and over voltages
Supply and delivery of earth fault device in build on panel
Supply and delivery of thermal control relay in build on panel
Erection and commissioning of VCB unit and terminal connections etc as directed at site
Supply erection and testing of 3 nos 1600A ACB and allied works at Royapuram sewage pumping stations in Area V
Supply delivery of 3 nos 1600A, 4 pole 50kA, Microprocessor Based, EDO Breaker
Dismantling of exisiting ACB, panel, Busbar earth connection and allied works as per site condition
Replacement of Aluminium Busbar 4 runs incoming and outgoing interconnection works and necessary bar bending providing holes busbar supporting SMC insulators color coded PVC heat sink insulating sleeves and complete bolts, nuts as per site condition
Fixing undervoltage coil, fabrication of ACB front door, 2000/5A current transformer -3 nos, push button set- 2 nos , power relay, multifunction meter digital, 6A single pole MCB, indicating LED lamps
Complete control wiring, peruls, lugs, sleeve , truff, channel mounting tray, tie and erection, testing, commissioning ACB and testing on load
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supplying and clamping of 3½ core 240 sq.mm. PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and termination with aluminium cable by 3½ core 240 sq.mm. PVC UG cable and with earth connection"
Hiring of 20 tonne crane for handling panel unit and transporting
Erection and commissioning of ACB units and terminal connections etc as directed at site
Supply erection and testing of 3 nos 1000A ACB and allied works at Tondiarpet B sewage pumping stations in Area V
Supply delivery of 1000A, 4 pole 50kA, Microprocessor Based, EDO Breaker
Dismantling of exisiting ACB, panel, Busbar earth connection and allied works as per site condition
Replacement of Aluminium Busbar 4 runs incoming and outgoing interconnection works and necessary bar bending providing holes busbar supporting SMC insulators color coded PVC heat sink insulating sleeves and complete bolts, nuts as per site condition
Fixing undervoltage coil, fabrication of ACB front door, 2000/5A current transformer -3 nos, push button set- 2 nos , power relay, multifunction meter digital, 6A single pole MCB, indicating LED lamps
Complete control wiring, peruls, lugs, sleeve , truff, channel mounting tray, tie and erection, testing, commissioning ACB and testing on load
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supplying and clamping of 3½ core 240 sq.mm. PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and termination with aluminium cable by 3½ core 240 sq.mm. PVC UG cable and with earth connection"
Hiring of 20 tonne crane for handling panel unit and transporting
Erection and commissioning of ACB units and terminal connections etc as directed at site
Supply erection and testing of 3 nos 1000A ACB and allied works at napier park sewage pumping stations in Area V
Supply delivery of 1000A, 4 pole 50kA, Microprocessor Based, EDO Breaker
Dismantling of exisiting ACB, panel, Busbar earth connection and allied works as per site condition
Replacement of Aluminium Busbar 4 runs incoming and outgoing interconnection works and necessary bar bending providing holes busbar supporting SMC insulators color coded PVC heat sink insulating sleeves and complete bolts, nuts as per site condition
Fixing undervoltage coil, fabrication of ACB front door, 2000/5A current transformer -3 nos, push button set- 2 nos , power relay, multifunction meter digital, 6A single pole MCB, indicating LED lamps
Complete control wiring, peruls, lugs, sleeve , truff, channel mounting tray, tie and erection, testing, commissioning ACB and testing on load
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supplying and clamping of 3½ core 240 sq.mm. PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and termination with aluminium cable by 3½ core 240 sq.mm. PVC UG cable and with earth connection"
Hiring of 20 tonne crane for handling panel unit and transporting
Erection and commissioning of ACB units and terminal connections etc as directed at site
Supply fabrication erection testing commisioning comprising LT panel Board with neccesary busbar color coding etc as per site condition
Supply erection and testing of 3 nos 630A ACB and allied works at law collage sewage pumping stations in Area V
Supply delivery of 630A, 4 pole 50kA, Microprocessor Based, EDO Breaker
Dismantling of exisiting ACB, panel, Busbar earth connection and allied works as per site condition
Replacement of Aluminium Busbar 4 runs incoming and outgoing interconnection works and necessary bar bending providing holes busbar supporting SMC insulators color coded PVC heat sink insulating sleeves and complete bolts, nuts as per site condition
Fixing undervoltage coil, fabrication of ACB front door, 2000/5A current transformer -3 nos, push button set- 2 nos , power relay, multifunction meter digital, 6A single pole MCB, indicating LED lamps
Complete control wiring, peruls, lugs, sleeve , truff, channel mounting tray, tie and erection, testing, commissioning ACB and testing on load
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supplying and clamping of 3½ core 240 sq.mm. PVC LTUG cable by MS clamps on wall
Supplying and fixing of cable gland and termination with aluminium cable by 3½ core 240 sq.mm. PVC UG cable and with earth connection"
Hiring of 20 tonne crane for handling panel unit and transporting
Erection and commissioning of ACB units and terminal connections etc as directed at site
Supply fabrication erection testing commisioning comprising LT panel Board with neccesary busbar color coding etc as per site condition
Supply and delivery of 11kV Vacuum circuit breaker and allied works at Royapuram sewage pumping station
Supply, delivery of 11kV, 25kA, 630A HT outdoor three panel Vacum circuit Breaker
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Hiring of 20 tonne crane for handling panel unit and transporting
Charges for testing dielectric strength to withstand breaking capacity 11kV/26.3kA
Supply, delivery and laying of 300 sq mm 11kV XLPE cable- unearthed
240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
Supply and installation of combined model surge protection device to aarest surges and over voltages
Supply and delivery of earth fault device in build on panel
Supply and delivery of thermal control relay in build on panel
Erection and commissioning of VCB unit and terminal connections etc as directed at site
supply and delivery of 11kv, 25kA 630A HT Outdoor Three Panel ring main gear unit and allied works at Royapuram sewage pumping stations in Area V
supply and delivery of 11kv, 25kA 630A HT Outdoor Three Panel ring main gear unit
Supply, delivery and laying of 300 sq mm 11kV XLPE cable- unearthed
240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
Supply and installation of combined model surge protection device to aarest surges and over voltages
Supply and delivery of earth fault device in build on panel
Supply and delivery of thermal control relay in build on panel
Erection and commissioning of RMG units and terminal connections etc as directed at site
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supply and delivery of thermal control relay in build on panel
Hiring of 20 tonne crane for handling panel unit and transporting
Providing of Power Pack 230V/110V, 70W, Stored 3 - 5 Trippings
Supply and laying of 3C x 2.5sqmm copper armoured cable
supply and delivery of 11kv, 25kA 630A HT Outdoor Three Panel ring main gear unit and allied works at Napier park sewage pumping stations in Area V
supply and delivery of 11kv, 25kA 630A HT Outdoor Three Panel ring main gear unit
Supply, delivery and laying of 300 sq mm 11kV XLPE cable- unearthed
240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
Supply and installation of combined model surge protection device to aarest surges and over voltages
Supply and delivery of earth fault device in build on panel
Supply and delivery of thermal control relay in build on panel
Erection and commissioning of RMG units and terminal connections etc as directed at site
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supply and delivery of thermal control relay in build on panel
Hiring of 20 tonne crane for handling panel unit and transporting
Providing of Power Pack 230V/110V, 70W, Stored 3 - 5 Trippings
Supply and laying of 3C x 2.5sqmm copper armoured cable
supply and delivery of 11kv, 25kA 630A HT Outdoor Three Panel ring main gear unit and allied works at Tondiarpet B sewage pumping stations in Area V
supply and delivery of 11kv, 25kA 630A HT Outdoor Three Panel ring main gear unit
Supply, delivery and laying of 300 sq mm 11kV XLPE cable- unearthed
240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
Supply and installation of combined model surge protection device to aarest surges and over voltages
Supply and delivery of earth fault device in build on panel
Supply and delivery of thermal control relay in build on panel
Erection and commissioning of RMG units and terminal connections etc as directed at site
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Supply and delivery of thermal control relay in build on panel
Hiring of 20 tonne crane for handling panel unit and transporting
Providing of Power Pack 230V/110V, 70W, Stored 3 - 5 Trippings
Supply and laying of 3C x 2.5sqmm copper armoured cable
Supply and delivery of 11kV Vacuum circuit breaker and allied works at Tondiarpet B sewage pumping station
Supply, delivery of 11kV, 25kA, 630A HT outdoor three panel Vacum circuit Breaker
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Hiring of 20 tonne crane for handling panel unit and transporting
Charges for testing dielectric strength to withstand breaking capacity 11kV/26.3kA
Supply, delivery and laying of 300 sq mm 11kV XLPE cable- unearthed
240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
Supply and installation of combined model surge protection device to aarest surges and over voltages
Supply and delivery of earth fault device in build on panel
Supply and delivery of thermal control relay in build on panel
Erection and commissioning of VCB unit and terminal connections etc as directed at site
Supply and delivery of 11kV Vacuum circuit breaker and allied works at walltax road sewage pumping station
Supply, delivery of 11kV, 25kA, 630A HT outdoor three panel Vacum circuit Breaker
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and laying of 25mm x 3mm copper earth conductor
Hiring of 20 tonne crane for handling panel unit and transporting
Charges for testing dielectric strength to withstand breaking capacity 11kV/26.3kA
Supply, delivery and laying of 300 sq mm 11kV XLPE cable- unearthed
240-300 sq.mm. 3 core HT Cable Indoor Terminations XLPE 11KV (E) - EPKT 3121
Supply and installation of combined model surge protection device to aarest surges and over voltages
Supply and delivery of earth fault device in build on panel
Supply and delivery of thermal control relay in build on panel
Erection and commissioning of VCB unit and terminal connections etc as directed at site
Bill No.3- Strengthening and Improvement of all sewage pumpibng station and its allied works in Area VI.
Supply, delivery, erection, commissioning of submersible centrifugal sewage non-clog pumps, vertical spindle type pump , wear resistance with submersible motor for the various duty conditions. Pump shall be capable of handling min 100 mm solid size with sewage specific gravity of up to 1.05. Pump shall be of robust construction, Liquid passages shall be finished smooth and designed as to allow free passage to solids. Pump Impeller should be of Non-clog semi open type , single vane / multi vane preferably contra bloc or vortex impeller design. Double mechanical seal with silicon carbide faces should be provided to protect the motor from ingress of sewage along the shaft. The critical speed of the rotor shall be at least 30% above the operating speed. Pumps should have double bearings between the pump & motor. The bearings life shall be minimum 100,000 hrs of operation with greased for life. Pump should be provided with automatic coupling device including pedestal, duck foot bend, stainless steel guide pipe or related accessories of suitable size to facilitate lifting and lowering into guide rails for easy maintenance. Pump shall be provided with a stainless steel lifting chain conforming to BS 970 Gr 304. Pump speed shall be of 9600 rpm for high duty pumps and 960/1450 rpm for low duty pumpsets. Casing and impeller should be of CI Gr. FG 260:IS210 more preferably with hardened impeller.Shaft should be of stainless steel AISI 410. All the fasteners and bolts shall be of AISI 410.The submersible motor shall be operated with 3ph, 415 V(+or– 10%), 50Hz(+or-5 %) dry induction type. Motor shall be capable of giving rated output without reduction in the expected life span when operated continuously. The rotating assembly shall be dynamically balanced as per standards. The starting current of the motor shall not exceed 200% of rated full load current for Star / Delta or ATS starting under any circumstances .The motor shall be suitable for full voltage star delta / ATS starting. The locked rotor current of the motor shall not exceed 600% of full load current unless otherwise specified. Motor shall be designed to withstand 120% of rated speed for two minutes without any mechanical damage, in either direction of rotation.
The motor vibration shall be within the limit specified in applicable standards . Motor should be of IE2, explosion proof compatible for VFD operation together with star-Delta /ATS starter, protection against increase in stator winding temperature (15 deg Celsius), bearing temperature, leakage in the stator housing and terminal box shall be provided and to be suitably interlocked with the control panel for tripping the pump in case of increase in temperature beyond set limit. Insulation class shall be of “Class H” and degree of protection shall be of IP 68 as per IS 4691. Motor shall be suitable for continuous operation in fully submerged or partially submerged condition.The pumpset shall be supplied with power cable of PVC insulated and PVC sheathed, copper, flexible, roundtype with required conductor size and number of cores as per starting method and of specified length for continuous use under water and air. The control cable of PVC insulated, PVC sheathed, flexible for stator winding temperature sensor 3core x 1.5 sq.mm copper conductor and for bimetallic switches 2core x 1.5 sqmm copper conductor shall be provided. Motor shall be supplied with 10m of rou nd submersible copper cable of suitable size. The non clog submersible pumpset shall be provided with suitable starter control panel having all protections as mentioned above. (upto 5 HP - DOL Starter, above 5 HP to 25 HP -Star Delta Panel and beyond 25 HP shall be ATS)
non clog Sew Pump - 8816 lpm against a total head of 29 m
non clog Sew Pump - 13225 lpm against a total head of 19 m
non clog Sew Pump - 6644 lpm against a total head of 22 m
non clog Sew Pump - 9458 lpm against a total head of 226 m
non clog Sew Pump - 18916 lpm against a total head of 23 m
non clog Sew Pump - 4064 lpm against a total head of 16 m
non clog Sew Pump - 8129 lpm against a total head of 14 m
non clog Sew Pump - 12193 lpm against a total head of 13 m
non clog Sew Pump - 14511 lpm against a total head of 16 m
non clog Sew Pump - 983 lpm against a total head of 25 m
non clog Sew Pump - 1474 lpm against a total head of 16 m
non clog Sew Pump - 9588lpm against a total head of 18 m
non clog Sew Pump - 7462 lpm against a total head of 26 m
non clog Sew Pump - 1194 lpm against a total head of 17 m
non clog Sew Pump - 4655 lpm against a total head of 12 m
non clog Sew Pump - 9309 lpm against a total head of 11 m
non clog Sew Pump - 13964 lpm against a total head of 11 m
non clog Sew Pump - 2468 lpm against a total head of 19 m
non clog Sew Pump - 3702 lpm against a total head of 9 m
non clog Sew Pump - 3071 lpm against a total head of 21 m
non clog Sew Pump - 6143 lpm against a total head of 18 m
non clog Sew Pump - 9214 lpm against a total head of 14 m
non clog Sew Pump - 1250 lpm against a total head of 13 m
non clog Sew Pump - 1501 lpm against a total head of 12 m
non clog Sew Pump - 3751 lpm against a total head of 11 m
non clog Sew Pump - 8301 lpm against a total head of 30 m
non clog Sew Pump - 12452 lpm against a total head of 18 m
non clog Sew Pump - 1487 lpm against a total head of 15 m
non clog Sew Pump - 2974 lpm against a total head of 13 m
non clog Sew Pump - 4460 lpm against a total head of 12 m
non clog Sew Pump - 2119 lpm against a total head of 13 m
non clog Sew Pump - 4239 lpm against a total head of 12 m
non clog Sew Pump - 6358 lpm against a total head of 10 m
non clog Sew Pump - 2087 lpm against a total head of 23 m
non clog Sew Pump - 4174 lpm against a total head of 19 m
non clog Sew Pump - 6261 lpm against a total head of 14m
Capacity of D.G. Set - 40 kVA
Capacity of D.G. Set - 62.5 kVA
Capacity of D.G. Set - 82.5 kVA
Capacity of D.G. Set - 125 kVA
Capacity of D.G. Set - 160 kVA
Capacity of D.G. Set - 200kVA
Capacity of D.G. Set - 250kVA
Capacity of D.G. Set - 1500 kVA
Supply and erection of Iron core Oil Cooled Transformer with Copper Winding Conforming to IS 2026
250 KVA, 11 KV / 433 V Outdoor Oil Cooled Transformer with off Circuit (As per IS 1180-Level 2)
500 KVA, 11 KV / 433 V Outdoor Oil Cooled Transformer with off Circuit (As per IS 1180-Level 2)
1600 KVA, 11 KV / 433 V Outdoor Oil Cooled Transformer withoff Circuit (As per IS 1180-Level 2)
Supply and erection of Indoor Three Panel Vaccum Circuit Breaker complete as per specification
11 KV, 25 KA, 630 A, HT Indoor Three Panel Vaccum Circuit Breaker complete as per specification
Supply,delivery, erection, testing and commissioning of electrically operarated actuator
Supply, delivery and erection of hand operated over head Travelling (HOT) crane suitable for a span upto 10 Mtrs, andtravel length upto 10 M with clear lift upto 10 M including gear type chain pulley block and geared Travelling trolley complete with all accessories including girder
5T capacity
3T capacity
Supply, delivery and erection of non clog Sew Pump - 16800 lpm against a total head of 10 m
Bill No.4- Improvement works to be carried out in the civil/Electrical structure of Sewage Pumping station in Area VI
Fabricating, Supply and fixing in position of MS gate with double leaves of size 5.0x 2.50m. The door outer frame will be 50mm dia GI pipe, the intermediate and cross stiffner will be 50X50X6mm MS angle covered with 18 gauge GI sheet with necessary hinges, tower bolts and aldrop etc., complete with one coat red oxide primer.
Fabricating, Supply and fixing in position of MS gate with double leaves of size 4.0 x 2.50m. The door outer frame will be 50mm dia GI pipe, the intermediate and cross stiffner will be 50X50X6mm MS angle covered with 18 gauge GI sheet with necessary hinges, tower bolts and aldrop etc., complete with one coat red oxide primer.
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with lead of 10m and lift of 2.0m
Supplying and filling Crushed stone sand (M-sand) for foundations and basement including watering consolidating ramming, etc., complete.
Cement concrete 1:3:6 using Crushed stone sand (Msand) and 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Supplying, fabricating and laying in position MS rounds or RTS rods for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc
Cement concrete 1:1 ½:3 using Crushed stone sand (Msand) and 20mm gauge hard broken stone jelly for reinforced cement concrete works excluding cost of steel, centering, shuttering and cost of steel reinforcement but including laying in position, compacting, curing, finishing, etc., complete.
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
Cement concrete 1:1½:3 using M-sand and 20mm gauge hard brocken sone jelly for PCC works , compacting, curing, finishing, etc., complete.
Plastering with (M-Sand) cement mortar 1:4 for 20mm thick including curing, etc., complete
Painting works to pump house in all Sewage pumping station
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete
Painting with priming coat on iron work
Painting with superior quality ready mixed paint of chocolate, light green, grey or any other approved colour. Old iron works tow coats
Supply and delivery of 400 mm dia and 450 mm SS delivery pipe line and its allied works
Isolation of well & dewatering well with sfety measures
Hiring of infloatable plug to avoid entering sewage to sucion well
Hiring of pneumatic hammer for dismantle cement concrete
Hiring charge for Air blower
Scaffolding charges for dismatling the existing delivery pipe line of 13 mts depth of well including necessary safety measures
Supplying Sch 40 304 grade SS Sheet for fabrication of SS pipe & SS specials
Charges for Fabricating and Fixing of SS pipes &Specials including pipe rolling ,cutting, welding , drilling holes and transporting, etc
Hiring of 20 ton crane charges for lifting and erection of SS pipe line
Charges for Dismantling the existing corroded 300mm dia delivery main
Removing the silt from bottom of the well with safety measures
Isolation of well & dewatering well with sfety measures
Hiring of infloatable plug to avoid entering sewage to sucion well
Hiring of pneumatic hammer for dismantle cement concrete
Hiring charge for Air blower
Scaffolding charges for dismatling the existing delivery pipe line of 13 mts depth of well including necessary safety measures
Supplying Sch 40 304 grade SS Sheet for fabrication of SS pipe & SS specials
Charges for Fabricating and Fixing of SS pipes &Specials including pipe rolling ,cutting, welding , drilling holes and transporting, etc
Hiring of 20 ton crane charges for lifting and erection of SS pipe line
Charges for Dismantling the existing corroded 300mm dia delivery main
Removing the silt from bottom of the well with safety measures
Providing Cement concrete road of 120 mtrs
Hiring JCB for clearing and leveling the earth & clearing the jungle
Earth work excavation and depositing on bank with initial lead of 10mtrs. And initial lift of 2mtrs. In hard stiff clay, stiff black cotton hard earth, shales, murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil(SS 20A)
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Providing Cement concrete road of 51 mtrs
Hiring JCB for clearing and leveling the earth & clearing the jungle
Earth work excavation and depositing on bank with initial lead of 10mtrs. And initial lift of 2mtrs. In hard stiff clay, stiff black cotton hard earth, shales, murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil(SS 20A)
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Providing Cement concrete road of 30 mtrs
Hiring JCB for clearing and leveling the earth & clearing the jungle
Earth work excavation and depositing on bank with initial lead of 10mtrs. And initial lift of 2mtrs. In hard stiff clay, stiff black cotton hard earth, shales, murams, gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil(SS 20A)
Supplying and filling M-sand for foundations and basement including watering consolidating, ramming, etc., complete
Cement concrete 1:3:6 using 40mm gauge hard broken stone jelly for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing, etc., complete
Stock Brick work with II class bricks in CM 1:4 for 23cm thick wall
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
Cement conrete 1:1½: 3 using 20mm gauge hard broken stone jelly for plain cement concrete works including laying in postion compacting, curing, finishing, etc., complete.
Construction of retaining wall / compound wall and other allied works at various Sewage pumping station
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with lead of 10m and lift of 2.0m
Supplying and filling sand for foundations and basement including watering consolidating ramming, etc., complete.
Cement concrete 1:3:6 using 40mm gauge hard brocken sone jelly for PCC works including laying in layers of not more than 15cm thick including ramming curing, etc., complete.
Cement concrete 1:1½:3 using M-sand and 20mm gauge hard brocken sone jelly for RCC works excluding cost of steel, centering, shuttering and cost of steel reinforcement but including laying in position, compacting, curing, finishing, etc., complete.
Supplying, fabricating and laying in position MS rounds or RTS rods for RCC works including cost of reinforcement, binding wire, cutting bending, cranking and tying in position with binding wire assembly, etc
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high
Stock brick work with II class bricks in cement mortar 1.4 (M-Sand) for 23cm thick wall including curing etc complete
Plastering with cement mortar 1:5 (M-Sand) for 20mm thick including curing, etc., complete
Painting two coats of redy mix plastic emulsion etc., complete
Hire charges for breaker to dismantling existing compound wall
Hiring and running charges for JCB
Clearing debrise including loading and conveyce charges
Supplying and fixing barbed wire fencing over the proposed compound wall with ‘L’ angle iron 50 x 50 x 6mm & 1.45m posts bent to shape at 2.5m centres with 6 rows of barbed wire and also in a zig zag manner at 25cm c.c. connecting all the rows with barbed wire will be of 2 ply and 12 gauge or other approved size including drilling hole in ‘L’ iron posts and fixing the posts in cement concrete 1:2:4 of size 15x15x45cm etc as directed.
Construction of pumphouse and other allied works with water supply and sanitary arrangements
Excavation in hard stiff clay, stiff black cotton, hard red earth, shales, muram, gravel stoney earth and earth mixed with small size boulders as per SS 20B with initial lead of 10m and lift of 2.0m etc. complete.
Supplying and filling sand for foundation and basement including watering, consolidating, ramming etc. complete.
P.C.C 1:3:6 using 40mm gauge hard broken stone jelly including laying in layers of not more than 15cm thick including ramming curing etc complete
Cement concrete 1:1 ½:3 using Crushed stone sand (M?sand) and 20mm gauge hard broken stone jelly for reinforced cement concrete works excluding cost of steel, centering, shuttering and cost of steel reinforcement but including laying in position, compacting, curing, finishing, etc., complete
Up to 1.5 mt below GL
1.5 mt to 4.5 mt below GL
Upto plinth above GL
Up to 4.5 mt Above Plinth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including strutting upto 3m high.
Above 3m high
Sun shade laying C.C. 1:2:4 for RCC sunshade work using 20mm hard broken stone jelly 80mm thick at wall end and 50mm thick at free end projecting 600mm from wall face moulded along with RC lintels and tailed into the full thickness of wall where there are no lintels excluding cost of reinforcement but including centering, shuttering, compacting, curing and finishing, etc., complete
Supplying, fabricating and laying in position MS or RTS rods for RCC works including cost of steel, binding wire, cutting, cranking and tying in position with binding wire assembly etc., complete
Stock brick work in cement mortor 1:4 using second class bricks including curring etc. complete for 23 cm thick wall
upto plinth
above plinth
11mm thick wall
Plastering with C.M 1:3 for 12mm thick including curing etc. complete
Special celling plastering 10mm thick with C.M. 1:3 for RCC slabs and beams, columns, roof slabs and sun shade
Supplying and fixing of PVC Doors of shutter panels dimension 20mm x 200mm thick, shutter frame dimension 24mm x 57mm and outer frame dimension 40mm x 48mm and wall thickness of 1.5mm (+ 5%) make Jain profile with reinforcement of wood. Outer frame and doors are connected by standard fittings of 3" stainless steel hinges 3 nos with 4" plastic handle 2 nos and 8" aldrop 2 nos and with required screws etc complete.
Flooring 100mm thick base concrete in C.M. 1:4:10 using 40mm B.G. jelly including laying, ramming, curing etc. complete complete
Paving Hydraulic Pressed Cement Double Charged Vitrified Tiles of size 600 x 600 x 8mm finished thickness with small Verona or Indian Marble Chips (other than Salem Magnasite) with CM 1:3, 20mm thick and painted with same colour Cement including polishing with power polisher to a high degree of polish so as to be perfectly smooth and glossy with GREY colour
Dadooing walls with glazed tiles of sizes 15cmx15cmx6mm thick laid in CM 1;2, 10mm thick and pointing with white cement using 0.4 Kg/m2 including finishing the joint and pointing flush with tile surface, etc., complete.
Terrace flooring with two course of pressed tiles 15x15x12 cm using cement mortor 1:3 mixed with crude oil 10% by weight of cement and pointed with same oiled mortor
Weathering course concrete with broken brick jelly 20mm guage in pure slacked lime over RCC roof slab in proportion of 32:12 (no sand to be sued) well beaten with wooden beaters to be required depth of 80mm thick and giving rerquired slope and thickness to roof as required etc. complete.
Supplying and erecting rolling shutters 76mm, 18 guage of galvanized steel sheet with push and pull tupe or self coiling type operated by operated by pulling hook with top cover including lock arrangements and fixing in position inside or out side etc. complete and painting with priming coat of red oxide with out lock (Payment will be made only for actual opening of shutters)
Maufacturing supplying and fixing in position Anodised Alu. Natural colour mat finish with openable type window with extruded Alu. Sections with two panels of size (Frame - 38 x 33 x21 x 2.4mm @ 0.615 Kg/m, Shutter: Bottom, Top - 38.5 x 33 x 24.5 x 3 & 4mm @ 0.706 Kg/m, Interlocking vertical - 59 x 33 x 25 x 2.5mm @ 1.135 Kg/m) with necessary accessaries such as rubber beadings best quality of lock handle hinges,stays and fixing 4 mm thick plain / frosted/ pin headed glass including cost of all materials labour for electrical consumption required for drilling holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the Board officers.The Al.Surfaces is to be anodised with matt finish usder electrically condition in accordance with ISI1868/1962 specification for an average anodic film thick of not less than 15 microns. (All materials should be got approved by the Site Engineer before fixing in position)
Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of size (Frame : Section - 101.60 x 44.45 x 3.18 mm @ 2.399 Kg/m, Shutter : Top, Middle, Vertical style- 50 x 44.45 x 2.5mm @ 1.292 Kg/m, Bottom - 100 x 44.45 x2.5mm @ 1.974 Kg/m) with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials,Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.All the materials should be got approved by the Site Engineer before fixing as directed.
Supplying and fixing in position of aluminium anodised colour matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans for louvers 4mm thick Al. Clips, including all materials, labour & power consumption charges required for fabrication if necessary chipping dismantling making holes in RCC columns,beamsor masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc., complete. The Aluminium surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than15 microns (fifteen) for all sections. All the materials should be got approved by the Site Engineer before fixing in position as directed.
Supplying and fixing M.S. grills for window including one coat of primer with red lead etc. complete as directed
Painting two coats with approved cement paint over onecoat of cement paint over cement plastered wall surface,ceiling including cleaning preparing the surface and curing, etc., complete
Painting two coats with approved cement paint over one coat of cement paint over cement plastered wall surface, ceiling including cleaning preparing the surface and curing, etc., complete ( Ceiling)
Painting two coats with superior quality of ready mixed paints of chocholate colour, light green or grey colour or any other approved colour over painting with primary coat (red lead) on new iron work.
Precast slab in Cement Concrete 1:2:4 using 12-20mm BG jelly for reinforced cement concrete works including cost of steel, centering, shuttering and cost of steel reinforcement and including laying in position, compacting, curing, finishing, etc., complete
Refilling with excavated soils (other than sand) complying with standard specifications for filling in foundations & basement
Providing and fixing colour glazed European water closet with rose wood seatings (Black) low level flushing tank with fittings, etc., complete.
Providing and fixing 100 mm dia CI soil pipe
Providing and fixing 50 mm dia CI soil pipe bend without door arrangement for bathroom
Providing and fixing 100mm dia CI soil pipe bend without door arrangements
Providing and fixing 50 mm dia CI soil pipe for bathroom
Providing and fixing 15 x 10 cm SW gully trap with CI gratings in BJ concrete in CM 1:4:10 with silt pit diaphragm arrangements etc., complete.
Providing and fixing 110mm dia PVC pipe with pipe bend for disposal of waste water from toilet in pumping station.
Construction of inspection chambers of following sizes with earth work excavation for foundation, 23cm thick concrete bed using 40mm brick jelly concrete in C.M. 1:4:10 for foundation, brick work in C.M. 1:6 for chamber, plastering with C.M. 1:3,12mm thick, benching, channelling, supplying and fixing 45x45cm medium weight L.S. cover and frame, etc., complete for a. 60cm x 60cm x 75cm
Supplying and fixing 55cm x 40cm colour glazed wash basin with lead and brass connections, C.P. Pillar Tap and other fittings, etc., complete
Supplying and fixing best mirror of size 60cmx45cm of 6mm thick with plywood back including necessary fittings, etc., complete
Supplying and fixing C.P towel rails 45cmx 20mm
Supplying GI pipes and specials of size 25mm dia including cutting, threading and jointing with necessary specials including carting the materials, fixing to wall with necessary clamps and screws, making holes in roof, repacking the same with necessary brickwork and plastering wherever necessary with scaffolding etc., complete
Supplying and fixing 25 mm GM Gate Valve
Supplying and fixing 20mm C.P Screw down Tap
Supply and delivery of domestic pumpset (centrifugal monobloc pumpset of capacity 100lpm and 20m head with ISI mark as per IS 9079/1989-1HP) including necessary electrical works etc., complete.
Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed at site etc.,
Wiring with 2.5Sq.mm PVC unsheathed copper single core in suitable conduit pipe for lighting with joint box and switch box with continuous earth conection by 14SWG TC wire
Wiring with 2.5 Sq.mm PVC unsheathed copper single core cable in suitable conduit pipe for fans with 5 Amps SP switches with MS joint box and MS switch box with continuous earht connection by SWG TC Wire.
Wiring with 2.5Sq.mm PVC unsheathed SC copper cable on suitable rigid PVC pipe for 5A 3 pin SC plug non interlocking including S&F plug pin top in TW box with continuous earth connection by 14 SWG TC wire
Run of 2 of 2.5sq.mm PVC unsheathed copper SC cable in PVC wire
20W 4 Feet LED fitting with LED
Supplying and fixing of 48" sweep AC ceiling fan complete with regulator with 1m down rod(steam pipe) including supplying and fixing or fan clamop with side plates and cross arm.
Supplying and fixing of 12” sweep AC exhaust fan complete including providing necessary opening in the wall
Supply & Erection of SS Screen inside the collection cum screen well Unit No. 1 & 2 and its allied civil works
Fabrication, Supply and Fixing of " Paa " channel (size of 175 mm x 75 mm x 25 mm thick) for supporting SS Screen to collection cum screen well including griding, cutting, welding etc. complete, as per site conditon
Fabrication, Supply and Fixing of SS flat size of 50 x 12 mm thickness to SS screen for collection cum screen well works including griding, cutting, SS welding etc. complete, as per site conditon
Fabrication, Supply and Fixing of SS flat size of 30 x 10 mm thickness for SS SS screen for collection cum screen well works including griding, cutting, SS welding etc. complete, as per site conditon
Fabrication, Supply and Fixing of SS angle size of 75 x 75 x 8 mm thickness for SS SS screen for collection cum screen well works including griding, cutting, SS welding etc. complete, as per site conditon
Hiring one no. of axial flow air circulation oxygen feed compressor pump with control panel ,operating crews, etc., complete. as per site condition
Hiring one no. of agitator for dilute grit and slurry at collection well and suction well with skilled crew, etc., as per site condition.
Hiring one no. of grit and slurry removal pumpset control panel with necessary cable, delivery hoses and required skilled and mazdoors for remove grit from collection and suction well with all safety measures. etc., complete. as per site condition.
Transporting charges to the equipments to work site and back to workshop.
Supply & Erection of SS grill in valve chamber Unit No. 1 & 2 and its allied civil works
Fabrication, Supply and Fixing of "I" Beam (size of 250 mm x 125 mm) for supporting SS Screen to collection cum screen well including griding, cutting, welding etc. complete, as per site conditon
Fabrication, Supply and Fixing of SS flat size of 50 x 10 mm thickness to SS screen for collection cum screen well works including griding, cutting, SS welding etc. complete, as per site conditon
Fabrication, Supply and Fixing of SS flat size of 30 x 6 mm thickness for SS SS screen for collection cum screen well works including griding, cutting, SS welding etc. complete, as per site conditon
Fabrication, Supply and Fixing of MS angle size of 75 x 75 x 8 mm thickness for SS SS screen for collection cum screen well works including griding, cutting, SS welding etc. complete, as per site conditon
Supply and fixing of 12mm x 4inch SS wall anchor bolt fastener etc complete as per site condition
Transporting charges to the equipments to work site and back to workshop.
Construction of suction well and other allied works Sewage pumping station
Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murum, gravel, stoney earth or earth mixed with small size boulders and hard gravely soil as per SS20B with initial lead of 10m and lift of 2m etc. complete.
For 0 to 2 m depth
Providing form work with centering for soffits of reinforced cement concrete slabs or plain surfaces including shuttering for RCC well curb and well steining.
From 1.0m above ground level to 3.0m below ground level (Curved Surface)
11 m to 12 m below GL
Providing and laying in position machine batched machine mixed and machine vibrated design mix. Sulphate resistance cement concrete M30 grade (River sand) for reinforced cement concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded machine broken granite stone jelly excluding the cost of centering and shuttering and reinforcement but including curing, Mixer, vibrator, etc. as per standard specification and as directed at site
From 1.0m above ground level to 1.5m below ground level
From 1.5m to 4.5m below ground level
From 9.0m to 13.5m below ground level
Cement concrete 1:2:4 using Crushed stone sand (M-sand) and 20mm gauge hard broken stone jelly & SRC for plain concrete works including laying ramming curing, etc., complete..
9m to 13.5m depth
Providing point edge to well curb using ISA 200x150x16 mm of weight 42.2 kg/m
Sinking of well below water level including all incidental charges using special tools and plants such as air compressior, helmet etc., complete and including baling out water. 7 m dia well
First depth of 2m
Second depth of 2m
Third depth of 2m
Fourth depth of 2m
Fifth depth of 2m
Sixth depth of 2m
Plugging the bottom of the well using C.C 1:3:6 using Crushed stone sand (M-sand) and 40mm gauge hard broken stone jelly with 10% excess cement for plain cement concrete works including laying in layers of not more than 15cm thick including ramming curing etc complete
9m to 13.5m depth
Supplying, fabricating CRS bars manufactured by Primary steel including cost of steel, binding wire, cutting, cranking and tying, in position with binding wire assembly etc complete.
Plastering with cement mortar 1:3 (SRC) using Crushed stone sand (M-sand) for 20mm thick including curing, etc., complete
Plastering with cement mortar 1:3 using Crushed stone sand (M-sand)) for 12mm thick including curing, etc., complete.
Refilling with excavated earth complying with standard specifications for filling in foundations & basement other than sand including watering & consolidating etc.,
Disposal of surplus earth
Supplying and fixing C.I.steps.
Colour washing two coats over one coat of white washing
Supply and erection of Cast Iron single faced manually operated rising type 600mm dia penstock with extension rod of 7m length conforming to relevant IS with IS markings on it, having cast iron door and frame with Gunmetal seating, spindle made of Stainless steel, CI head stock with gear arrangment and hand wheel fitted in well.
Supply and installation of SS open mesh flooring with 25x6mm thick flats for outer frame and 25x3mm SS and 12x3mm SS flats spaced at 30mm and 60mm respectively and 50x10mm SS flats for mesh support and 50x50x6mm SS angle for opening forming a mesh over the surface of the well etc,complete
Supplying and fixing PVC water bar, 150 mm wide for construction joint
Supply and delivery of 400 mm dia SS delivery pipe line and its allied works
Scaffolding charges for dismatling the existing delivery pipe line of well including necessary safety measures
Supplying Sch 40 304 grade SS Sheet for fabrication of SS pipe & SS specials
Charges for Fabricating and Fixing of SS pipes &Specials including pipe rolling ,cutting, welding , drilling holes and transporting, etc
Hiring of 20 ton crane charges for lifting and erection of SS pipe line
Supply and fixing of 400 mm Sluice valve
Supply and fixing of 400 mm Non return valve
Supply and fixing of 400 mm penstock valve
Supply, delivery and erection of various size of Penstock valve
Supply, delivery, erection and commissioning of various size of Non Return valve
Supply,delivery, erection and commissioning of various size of Sluice Valve
Electrical Works
Supply, delivery, erection and commissioning of 630 Amps MV Panel
Supply, delivery, erection and commissioning of Juntion Box
Supply, delivery and erection of non clog Sew Pump - 41666 lpm against a total head of 32 m
Supply ,delivery, installation and commisioning of odor control equipment with required Air flow suction capacity from sewage pumping station and required components i.e;. platform for instalation,commission, Ducting, Damper, Inlet, Drainage point, View Panel, Control panel with all electric accessoiries,media fillinf port, Pre filter, Regeration Port, Outlet, Adsorption Column. All components satisfied the required design parameter and Material of construction is Poly Ethylene or MS with epoxy lining. Power supply three pahse. Noise level should be as per IS.Equipment should be capable to remove odor from sewer exhaust by using physical adsorption and chemical conversion. Adsorption uses activated carbon to act as the media.Equipments capable to remove 99.9%of all incoming contaminates.Odor control unit shall be very high efficient and capable to regenerate of carbon. Technical specification need to approved concern departmental engineer in charge.
Airflow suction capacity 100 cum per hour
Airflow suction capacity 200 cum per hour
Airflow suction capacity 300 cum per hour
Airflow suction capacity 400 cum per hour
Airflow suction capacity 500 cum per hour
Airflow suction capacity 700 cum per hour
Airflow suction capacity 800 cum per hour
Airflow suction capacity 900 cum per hour
Airflow suction capacity 1000 cum per hour
Airflow suction capacity 1100 cum per hour
Airflow suction capacity 1700 cum per hour
Airflow suction capacity 2100 cum per hour
Airflow suction capacity 2400 cum per hour
Airflow suction capacity 2600 cum per hour
Airflow suction capacity 4400 cum per hour
Airflow suction capacity 4600 cum per hour
Supply, delivery and erection of name board at Sewage Pumping Station
Supplying, Fabricating and fixing of ACP Sheet
Supplying, Fabricating and fixing of MS frame for name board
Supplying and and fixing LED lights with necessary electrical wiring
Supplying and fixing of Acrylic letters
Scaffolding charges for fixing name board 12X 8m height
Transporting and Labour charges for fixing board
Supply and erection of Indoor Three Panel Vaccum Circuit Breaker complete as per specification
11 KV, 25 KA, 630 A, HT Indoor Three Panel Vaccum Circuit Breaker complete as per specification
Supply and erection of Air circuit breaker (With Shunt release and Under Voltage release)
Supply, delivery and erection of non clog Sew Pump - 58792 lpm against a total head of 28 m
Supply,delivery, erection, testing and commissioning of HT Structure
2 Pole Structure
6 Pole Structure
Sub Total (excluding GST)
M/s PST Engineering Construction (BID ID -1163026)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid